734 For masonry - TECHNICAL CHARACTERISTICS Flush mounting boxes Technical specifications • technopolymer highly resistant to impacts and to deformation • temperature during installation: from -15 °C to +60 °C • resistance to abnormal heat and to fire (Glow Wire test) 650 °C (960 °C .AU types) • 20% increased inner space to ease accomodation of all the equipments and of all the cables necessary for their supply and operation • possibility of realizing modular and electrically separated compartments with the divider V71550 • knockouts to accomodate differently sized conduits • fixing lugs for the mounting frame screws with zinc-plating and olive green passivation, protected by special wax-like covering to prevent thread occlusion during installation and plastering and to ease screws engagement • knockouts can be opened without the use of a tool • antimortar protection for ø 60 mm round mounting boxes and 3, 4, 5 and 6/7-module rectangular mounting boxes, through specially designed yellow covers • technological solutions covered by many patents Conformity to Standards LV Directive EN 60670-1 Standard Dividing screen to realize modular and electrically separated compartments Precise back to back positioning, thanks to marking and stopping pins Knockouts fixed to the box in two points only Knockouts on all sides to accomoda- te differently sized conduits Dimensions (in mm) 50 60 49 48,5 49,8 59 83,5 96 V71001 V71001.AU V71303 V71303.AU 48,5 49,8 59 V71304 108,5 121 V71304 V71304.AU 48,5 49,8 59 132 144,4 V71305 V71305.AU 59 100 174,3 48,5 49,8 60 V71306 V71306.AU 09996 09996.AU Overall dimensions: 48 mm Flush depth: 46,8 mm 83,5 94 46 111
•20% increased innerspace toeaseaccomodationofall theequipments and of all the cables necessary for their supply and operation
•possibilityofrealizingmodularandelectricallyseparated compartments with the divider V71550•knockoutstoaccomodatedifferentlysizedconduits•fixinglugsforthemountingframescrewswithzinc-platingand
olive green passivation, protected by special wax-like covering to prevent thread occlusion during installation and
plastering and to ease screws engagement•knockoutscanbeopenedwithouttheuseofatool•antimortarprotectionforø60mmroundmountingboxesand
3, 4, 5 and 6/7-module rectangular mounting boxes, through specially designed yellow covers
•technologicalsolutionscoveredbymanypatents
Conformity to StandardsLV DirectiveEN 60670-1 Standard
Precise back to back positioning, thanks to marking and stopping pins
Knockouts fixed to the box in two points only
Knockouts on all sides to accomoda-tedifferentlysizedconduits
Dimensions (in mm)
50 60
49 48,5
49,8
59
83,5
96
V71001V71001.AU
V71303V71303.AU
48,5
49,859
V71304
108,5
121
V71304V71304.AU
48,5
49,8
59
132
144,4
V71305V71305.AU
59
100
174,3
48,5
49,8
60
V71306V71306.AU 09996
09996.AUOverall dimensions: 48 mmFlush depth: 46,8 mm
83,5
94
46 111
68 172
70 180
V71320
95 134
V71321
68 172
70 180
170
204
735
BOXES
For masonry
Flush mounting boxes for masonryV71001 Roundmountingbox,ø60mm(GW650°C),lightblueV71001.AU Roundmountingbox,ø60mm(GW960°C),blackV71303 Rectangularmountingbox,3modules(GW650°C),lightblueV71303.AU Rectangularmountingbox,3modules(GW960°C),black
V71001 V71303
V7001.AU V71303.AU
Flush mounting boxes for masonryV71304 Rectangularmountingbox,4modules(GW650°C),lightblueV71304.AU Rectangularmountingbox,4modules(GW960°C),blackV71305 Rectangularmountingbox,5modules(GW650°C),lightblueV71305.AU Rectangularmountingbox,5modules(GW960°C),black
V71304 V71305
V71304.AU V71305.AU
BO
XE
SC
ON
SU
ME
R
UN
ITS
736
For masonry - TECHNICAL CHARACTERISTICS
Isobox:flushmountingboxes
Dimensions (in mm)
50 60
49 48,5
49,859
83,5
96
V71001V71001.AU
V71303V71303.AU
48,5
49,8
59
V71304
108,5
121
V71304V71304.AU
48,5
49,8
59
132
144,4
V71305V71305.AU
59
100
174,3
48,5
49,8
60
V71306V71306.AU 09996
09996.AUOverall dimensions: 48 mmFlush depth: 46,8 mm
83,5
94
46 111
68 172
70 180
V71320
95 134
V71321
68 172
70 180
170
204
V71303:3-module flushmountingbox.
V71550:Dividing screen for electrically separated compartments
V71323:Protective antimortarcover for 3-module box
Reinforced area so as to assure structural strength for fixing the mounting frame
Rack for fixing the dividing screen (Vimarpatent)
As it is inside the box profile, the edge of the cover assures easi-
ness and utmost accuracy when removing the plaster and cover
Fixing lugs for making cover removal easier.Theycanbefoldedsoastonotdisturbtheplaster(Vimarpatent)
Profiles for removing the cover with the help of pliers
V71303 - Installation
V71562:Joint plate for side-by-side installations
737
BOXES
BO
XE
SC
ON
SU
ME
R
UN
ITS
For masonry
Flush mounting boxes for masonryV71306 Rectangularmountingbox,6/7modules(GW650°C),lightblueV71306.AU Rectangularmountingbox,6/7modules(GW960°C),black09996 Rectangularmountingbox,6(3over3)modules(GW650°C),lightblue09996.AU Rectangularmountingbox,6(3over3)modules(GW960°C),black
Flush mounting boxes for masonryV71320 Rectangularmountingbox,12/14modules(GW650°C),lightblueV71321 Rectangularmountingbox,18/21modules(GW650°C),lightblue
V71306 09996
V71306.AU 09996.AU
V71320 V71321
Accessories, page 731
738
For hollow walls - TECHNICAL CHARACTERISTICS
Isobox:flushmountingboxes
- During assembly they have progressive tightening to grip on platesfrom1to38mm.
- And if you want to remove the box, just loosen the screws and the flaps will retract into their seat
•technopolymer, highly resistant to impacts and to deformation•temperatureduringtheinstallation:from-15°Cto+60°C•resistancetoabnormalheatandtofire:GlowWiretestat850°C
Conformity to StandardsLV DirectiveEN 60670-1 Standard
Technical specifications•suitabletobemountedincavitywalls(plaster,wood,lamina-ted structures) not permitting the use of conventional fixingdevices
•rearbuilt-incentring template, fora fasterandmoreprecisepreparationoftheplateandside-by-sideinstallation.Theboxshapeallowstheuseofa68mmhollowmillappliedtoadrill.
•Knockoutswith patented retention. On each side there areknockoutsofdifferentdiameters:16,20and25mm.Andforeach knockout a patented system holds the corrugated pipe thankstoaspecialflaponthebottomofthebox:justinsertthe pipe
Centring template incorporated on the backTomakeplatepreparationandthereforeinstallationfasterandmoreprecise.
Knockouts with patented retetion A patented system holds the corrugated pipe thanks to a spe-cial f lap on the bottom of the box. Also in the back of the box.
Metal flaps, with progressive tighteningWhenpositioningtheboxtheyretract to permit easy insertionintothehole.
V71613 - Installation
Dimensions (in mm)
114,2
V71616
V71601 V71613
V71614
V71620
136,8
83,6
65 72,5
108 100
114
193
180
194
199,3
71,5
60
50
0,748,6
50
0,748,6
50
0,748,6
70
1
68,2
65 72,5
64,5
72,5
95
134,2
50
0,748,6
114,2
V71616
V71601 V71613
V71614
V71620
136,8
83,6
65 72,5
108 100
114
193
180
194
199,3
71,5
60
50
0,748,6
50
0,748,6
50
0,748,6
70
1
68,2
65 72,5
64,5
72,5
95
134,2
50
0,748,6
739
BOXES
BO
XE
SC
ON
SU
ME
R
UN
ITS
For hollow walls
Flush mounting boxes for hollow wallsV71601 Roundmountingbox(GW850°C),lightblue.Suitable only for mounting frames without claws
V71613 3-modulemountingbox(GW850°C),lightblue
Flush mounting boxes for hollow wallsV71614 4-modulemountingbox(GW850°C),lightblueV71616 6/7-modulemountingbox(GW850°C),lightblue
V71601 V71613
V71614 V71616
Accessories, page 741
740
For hollow walls - TECHNICAL CHARACTERISTICS
Isobox:flushmountingboxes
Multifunction box (V71620)
Horizontal dividing screen(V71551)
Cable ties backing attach (V70186)
Knockouts with patented retetion Sideandbottom,indifferentdiameters:20,25and32mm.
ø 21
ø27
ø36
21 25
21
26
30,5
Side-by-side installation with V71562 joint plate Cable entry dimensions
V71562
V71303
Plana 14-module with frame (14620)andcoverplate(14690...);or:Eikon 14-module with frame (20620)andcoverplate(20660...);Idea 12-modulewithframe(16718)andcoverplate(16748...).
