FDP(3101) Product Description

00467900

GPX147-FAT3101 Product Description

Issue 06

Date 2009-11-28

HUAWEI TECHNOLOGIES CO., LTD.

Copyright © Huawei Technologies Co., Ltd. 2009. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the commercial contract made between Huawei and the customer. All or partial products, services and features described in this document may not be within the purchased scope or the usage scope. Unless otherwise agreed by the contract, all statements, information, and recommendations in this document are provided “AS IS” without warranties, guarantees or representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China

Website: http://www.huawei.com

Email: [email protected]


Issue 06 (2009-11-28) Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd. Page 3 of 16

Contents

1 Overview of the GPX147-FAT3101 ..................................................................................4

2 Features of the GPX147-FAT3101.....................................................................................8

3 Application Scenarios of the GPX147-FAT3101............................................................9

4 Technical Specifications of the GPX147-FAT3101......................................................12 4.1 Parameters of the GPX147-FAT3101................................................................................................. 12 4.2 Performance Indexes of the GPX147-FAT3101................................................................................. 14 4.3 Standard Compliance of the GPX147-FAT3101 ................................................................................ 14




1 Overview of the GPX147-FAT3101

GPX147-FAT3101 series of fiber access terminal (hereafter abbreviated as FAT) is located at the user access point of FTTx for connecting the distribution optical cables and drop cables, direct connection, branching and protection of optical fibers. It supports random number allocation. No additional tools are required if users open it repeatedly.

By installation location, GPX147-FAT3101 involves indoor and outdoor models; by supported connection mode, GPX147-FAT3101 involves mechanical connection and splicing connection.

The indoor GPX147-FAT3101 and the outdoor GPX147-FAT3101D have the following differences:

Different appearance: To enhance sealing effect, the outdoor GPX147-FAT3101D uses the inner hexagonal screw, as shown in Figure 1-1.

Figure 1-1 Outdoor GPX147-FAT3101D appearance

1. Inner hexagonal screw

The indoor GPX147-FAT3101 uses the peg to replace the Inner hexagonal screw, as shown in Figure 1-2.




Figure 1-2 Indoor GPX147-FAT3101 appearance

1. Peg

Different inner structure: The outdoor GPX147-FAT3101D includes the rubber sealing loop, as shown in 7 of Figure 1-3.

Figure 1-3 Composition of outdoor GPX147-FAT3101D

1. Optical circuit diagram

2. Cabinet body 3. Splicing tray

4. Binding strap 5. Fixture pole for the strength member

6. Fixture and stripping protection device

7. Rubber sealing loop

8. Grounding devices 9. Rubber plug

The indoor GPX147-FAT3101 does not include the rubber sealing loop, as shown in Figure 1-4.




Figure 1-4 Composition of indoor GPX147-FAT3101

1. Optical circuit diagram

2. Cabinet body 3. Splicing tray

4. Binding strap 5. Fixture pole for the strength member

6. Fixture and stripping protection device

7. Grounding devices 8. Rubber plug

Different protection level: The outdoor GPX147-FAT3101D has a protection level of IP65, while the indoor GPX147-FAT3101 has a protection level of IP4X.

Different application scenarios: For more details, please refer to 3 Application Scenarios of the GPX147-FAT3101.

The unbranched optical fibers leave out of the box in different mode: The cable leading-out hole at the upper side of the outdoor GPX147-FAT3101D has been sealed, so the unbranched optical fibers can only leave out of the outdoor GPX147-FAT3101D from the cable leading-in hole at the lower side of the outdoor GPX147-FAT3101D, while the unbranched optical fibers can leave out of the indoor GPX147-FAT3101 from the cable leading-out hole either at the upper side or at the lower side of the indoor GPX147-FAT3101.

The GPX147-FAT3101 allows the drop cable (flat) and general optical cable to be led in:

The drop cable (flat) holes can support the leading-in and leading out of 18 drop cables (2 mm × 3 mm).

The general optical cable holes can support the leading-in and leading out of the general cable with a diameter less than 15 mm.

GPX147-FAT3101 Working Principles Figure 1-5 shows the working principles of GPX147-FAT3101.




Figure 1-5 The working principles of GPX147-FAT3101




2 Features of the GPX147-FAT3101

The GPX147-FAT3101 features flexible application, reasonable design, easy and durable operation.

Flexible application Rich capacity, adaptable to different indoor and outdoor application scenarios. Direct connection and branching of an optical cable is available. Flexible Fiber Connection: The product supports fiber splicing and fiber

mechanical connection. With the Huawei-patented device for fixing fiber connection points, users can reliably fix various splicing protection tubes and fiber mechanical connection terminals on the same FAT.

Reasonable Design Fiber spool is available under the splicing tray to store redundant unbranched

optical fibers. Independent area is designed for routing flex optical cables. The lock of GPX147-FAT3101 features special structure to withstand various

formidable environment and to protect the product from professional theft. The lock core does not have spring, in addition, cam structure is adopted to avoid the circumstance that the door is unable to be opened for the spring is rusted. The lock is easy to use and boasts good robustness. Moreover, the special dust-proof lock hole can prevent dust from entering the FAT.

Easy and durable operation The GPX147-FAT3101 supports random number allocation. No additional tools

are required if users open it repeatedly. When routing an optical cable into the GPX147-FAT3101, you can place the

cable on the cable inlet after you open the door-lock and remove the plug, rather than route it through the cable inlet. In this way, you can lead in and lead out optical cables more conveniently.

Easy installation and durable.




3 Application Scenarios of the GPX147-FAT3101

The GPX147-FAT3101 can be classified into indoor GPX147-FAT3101 and outdoor GPX147-FAT3101D respectively used in indoor or outdoor scenarios.

Position of GPX147-FAT3101 in FTTH-ODN Network The GPX147-FAT3101 is located at the user access point in the FTTH-ODN network. It connects distribution optical cables and drop cables, provides direct connection and branching for optical cables, and protects them, as shown in Figure 3-1.

Figure 3-1 Position of GPX147-FAT3101 in FTTH-ODN network

Application Scenario of the outdoor GPX147-FAT3101D The outdoor GPX147-FAT3101D can be installed on the wall of a building, as shown in Figure 3-2.




Figure 3-2 Outdoor GPX147-FAT3101D installed on the wall

The outdoor GPX147-FAT3101D can also be installed on the pole, as shown in Figure 3-3.

Figure 3-3 Outdoor GPX147-FAT3101D installed on the pole

Whichever installation method is adopted, the outdoor GPX147-FAT3101D is used to cover a subscriber group, and usually, the number of the subscribers in this group is within 6 to 18 (equivalent to the capacity of an outdoor GPX147-FAT3101D), as shown in Figure 3-4.

Figure 3-4 Outdoor GPX147-FAT3101D application scenarios

The distribution optical cable is led in from the cable inlet at the bottom and led out from the cable outlet at the bottom.




Application Scenarios of the indoor GPX147-FAT3101 1. In one application, the indoor GPX147-FAT3101 is installed in the corridor of a building with multiple floors. After distribution optical cables are routed in the building, they are firstly routed into the fiber access terminal through the cable inlets at the bottom and then routed out of the cabinet through the cable outlet at the top or the bottom. The fiber access terminal implements the branching and direct connection of optical cable so that the distribution optical cable are connected to terminal flexible optical cables entering each family, as shown in Figure 3-5.

Figure 3-5 Indoor GPX147-FAT3101 installed in the corridors of a building with multiple floors

2. In the other application, the indoor GPX147-FAT3101 is installed in the corridors of a high-rise building. The distribution optical cables in a high-rise building are routed from the lowest floor to the highest one. In this case, optical cables are routed into the GPX147-FAT3101 through the cable inlet at the bottom and then routed out of the cabinet through the cable outlet at the top or the bottom. The GPX147-FAT3101 implements the branching and direct connection of optical cable so that the distribution optical cables are connected to terminal flexible optical cables entering each family, as shown in Figure 3-6.

Figure 3-6 Indoor GPX147-FAT3101 installed in the corridors of a high-rise building




4 Technical Specifications of the GPX147-FAT3101

4.1 Parameters of the GPX147-FAT3101 Parameters of the GPX147-FAT3101 include specification parameters and environment parameters.

Specification Parameters of the GPX147-FAT3101 GPX147-FAT3101 involves indoor and outdoor models. Up to now, there are six types of products available. Table 4-1 lists the specifications of the GPX147-FAT3101.

Table 4-1 Specifications of the GPX147-FAT3101

Product Model

Dimensions H × W × D (mm)

Installation Mode

Capacity (cores)

Weight (kg)

Color Material of box body

Material of Splicing tray

Remarks

Outdoor GPX147-FAT3101D

GPX147-FAT3101D-6

6

GPX147-FAT3101D-12

12

GPX147-FAT3101D-18

296 × 238 × 70

On the outdoor wall or pole

18

2.6 PANTONE Cool Gray 3 C

Superior weather-proof PC

ABS Equipped with the splicing protection tube. If mechanical connection is needed, please order the mechanical splicers separately.

Indoor GPX147-FAT3101




Product Model

Dimensions H × W × D (mm)

Installation Mode

Capacity (cores)

Weight (kg)

Color Material of box body

Material of Splicing tray

Remarks

GPX147-FAT3101-6

6

GPX147-FAT3101-12

12

GPX147-FAT3101-18

296 × 238 × 70

On the indoor wall

18

2.6 PANTONE Cool Gray 3 C

Superior weather-proof PC

ABS Equipped with the splicing protection tube. If mechanical connection is needed, please order the mechanical splicers separately.

Take the GPX147-FAT3101D-6 as an example to describe the naming rules of the GPX147-FAT3101 products: "GPX147" indicates a Huawei cable distribution product; "FAT" means Fiber Access Terminal; "3" means the product is installed on the wall; "1" means that the product is not configured with cable distribution function; "01" is the model of the product, numbered from 01; "D" refers to outdoor (if no "D" appears here, it refers to indoor); "6" indicates that the user capacity is 6 cores.

The GPX147-FAT3101 may be equipped with different accessories depending on its installation modes. Table 4-2shows the accessories.

Table 4-2 The accessories of GPX147-FAT3101

Installation method Accessories

Four M6 Expansion bolt sets On the wall

One line-drawing template

One pole mounting set

Four bolt sets

On the pole

Two M6 nuts

Environment Parameters of the GPX147-FAT3101 Table 4-3 lists the environment parameters of the GPX147-FAT3101.




Table 4-3 Environment parameters of the GPX147-FAT3101 products

Parameter Value

Operating temperature -25oC to +60oC

Storage temperature -40oC to +70oC

Operating humidity ≤ 93% (+30oC)

Air pressure 70 KPa to 106 KPa

4.2 Performance Indexes of the GPX147-FAT3101 Performance indexes of the GPX147-FAT3101 include the insertion loss, insulation resistance, dielectric withstanding voltage, protection level, and fireproof level. All these specifications comply with the industrial standards.

Table 4-4 lists the performance indexes of the GPX147-FAT3101.

Table 4-4 Performance indexes of the GPX147-FAT3101

Parameter Value

Insertion loss ≤ 0.2 dB (mechanical connection); ≤ 0.1 dB (splicing)

Insulation resistance ≥ 2 x 104 MΩ/500 V DC (between the grounding device and the metal part of the cabinet body)

Dielectric withstanding voltage ≥ 3000 V DC/min (between the grounding device and the metal part of the cabinet body)

Protection level IP65 (for outdoor GPX147-FAT3101D); IP4X (for indoor GPX147-FAT3101)

Fireproof level Compliant with requirements in UL94 V0

4.3 Standard Compliance of the GPX147-FAT3101 This describes the international and national standard compliance of the GPX147-FAT3101.

International Standard Compliance of the GPX147-FAT3101

Standard name Description

IEC 62134-1-2002 Fibre optic enclosures - Part 1: Generic specification




Standard name Description

ITU-T L.51 Passive node elements for fibre optic networks – General principles and definitions for characterization and performance evaluation

IEC 60529 Degrees of protection provided by enclosures (IP Code)

ETSI-3000-19-2-2 Environmental conditions and environmental test for telecommunications equipment; Part 2-2: Specification of environmental tests Transportation CLASS 2.3 (Public Transportation)

EN 60950-1 Information Technology Equipment - safety - Part 1: General Requirements

UL94 Test for flammability of Plastic Materials for parts in Devices and Appliances V-0

IEC 61300-3-3 Examinations and measurements – Active monitoring of changes in attenuation and return loss

IEC 61300-3-28 Examinations and measurements Transient loss

IEC 60068-2-1 Cold,Low temperature storage

IEC 60068-2-6 Environmental testing – Part 2-6: Tests – Test Fc: Vibration (sinusoidal)

National Standard Compliance of the GPX147-FAT3101

Standard Name Description

GB/T 2423.1-2001 Basic Environmental Testing for Electric and Electronic Products - Part 2 - Testing Method - Test A: Low Temperature

GB/T 2423.2-2001 Basic Environmental Testing for Electric and Electronic Products - Part 2 - Testing Method - Test B: High Temperature

GB/T 2423.4-1993 Basic Environmental Testing Process for Electric and Electronic Products - Test Db: Alternative Moist Heat Test

GB/T 2423.9-2001 Basic Environmental Testing Process for Electric and Electronic Products - Test Cb: Constant Moist Heat Test

GB/T 2423.17-1993 Basic Environmental Testing Process for Electric and Electronic Products - Test Ka: Salt Spray Test

GB/T 2828.1-2003 Count Sampling Inspection Process - Part 1: Sampling Plan for Batch Inspection by Acceptance Quality Limit (AQL)

GB/T 2829-2002 Count Sampling Procedures And Tables for Periodic Inspection (Applied to Inspection of Process Stability)




Standard Name Description

GB/T 3873 General Specifications for Products Packaging of Communication Equipment

GB/T 9286-1998 Color Paints and Varnishes-Cross Cut Test for Films

GB 4208-1993 Shell Protection Level (IP Code)

GB 5095.2-1997 Basic Testing Process and Measurement Method for Electromechanical Components of Electronic Equipment - Part 2 - General Test, Electricity Continuity and Contact Impedance Test, Insulation Test and Electricity Stress Test

GB/T 7424.1-2002 General Standard for Optical Cables - Part 2: Basic Test Method for Optical Cables

GB/T 12507.1-2000 Connectors of Optical Fibers and Optical Cables - Part 1: General Standard

GB/T 15972-1998 General Standard for Optical Fibers

Date post:	27-Nov-2014
Category:	Documents
Upload:	vladimirnoch
View:	126 times
Download:	3 times

FDP(3101) Product Description

Documents