r e c e s s e d M R16 m e t a l h a l i d e d o w n l i g h t

FeaturesThree MR MH DL is a very efficient 3” aperture downlight designed for

use with 20-watt or 39-watt MR-16 or ES-16 metal halide lamps. Fixture is

equipped with an electronic ballast. Reflector design minimizes aperture

brightness with a shielding angle of 40°. Recess depth is only 6”.

MR-16 and ES-16 metal halide lamps are available in spot, flood and

wide flood. These lamps have a color rendering index (CRI) up to 90, color

temperatures of 3000°K and 4000°K, and up to a 12,000-hour life.

Three MR MH DL accepts one or two of 15 available Optical Accessories

including lenses, a UV filter and color filters.

Reflectors are available in clear, natural aluminum in two finishes: EvenTone,

our standard clear finish, partially diffuse, anti-iridescent and gently luminous

in appearance and EasyTone, diffuse and luminous. Additionally, reflectors

are available in black.

Three MR MH DL includes a pair of mounting bars (¾” x 27” C channel).

Specialty bars for wood joist and T-bar installations are also available.

aPPLICatIONs Fixture is recommended for downlighting in stores, malls, banks, hotels,

schools, auditoriums, airports and sports facilities – especially in lobbies,

atria and other public areas.

Fixture is listed for Damp Location and suitable for use in a fire rated

ceiling. Fixture is prewired with electronic ballast and thermal protector,

and is approved for eight #12 wire

90°C branch circuit pull-

through wiring.

Removal of the reflec-tor from below allows access to the ballast and junction box.

LIGHtPLateA LightPlate may be used instead of a standard reflector.

THREE MR MH DL

41-50 22ND STREET, L IC NY 11101 tel 718.685.0700 fax 718.786.8530 www.epl.com©Copyright, Edison Price Lighting 2011 08:11

H I D

8-150

PrODuCt CODeFor complete product code, list basic unit and select one item from each following box.

Basic Unit .......................................................... THREE-MR-MH-DL

Wattage 20-watt ballast ................... –20 39-watt ballast .................–39

Voltage 120 volt service .................120 277 volt service .............. 277

Reflector Color and Detail Overlap Flush Trim Flush*EvenTone Clear ...................... VOL ...............VFL .............. VTFEasyTone Clear ..................... ECOL .............ECFL ............ ECTFBlack .................................... BOL ...............BFL .............. BTFOther reflector finishes available on special order.

Standard reflector flange continues reflector finish. White painted flanges and custom painted flanges are available on special order. Add WF (white flange) or CCF (custom color flange).*Trim Flush reflector trim requires the use of a plaster ring Accessory (see below).

A LightPlate may be ordered instead of a standard reflector above.LightPlate Downlight Spot, white ...DP3-OL .........DP3-FL .......DP3-TFCustom painted trims for LightPlate are available on special order. Add –CC

OPtICaL aCCessOrIesSpecify as separate line items. All are 2 3/8” (60mm) dia. Lenses and filters are glass; screens are aluminum.

diffuse glass ....................................................................DGS/2.37555° spread lens ........................................................ LENS/2.375prismatic lens (Solite) .........................................................PLS/2.37540° x 70° spread lens ............................................ LENS/2.375-4070beam smoother ................................................................CLR/2.375UV filter .......................................................................... UVF/2.375

Six color filters also available. See Optical Accessories.

▲

Requires ceiling opening of 3 ¾” (95mm) for Overlap or Flush Detail.Requires ceiling opening of 4” (102mm) for Trim Flush Detail.

aCCessOrIes Specify as a separate line item.

Plaster ring allows use of Trim Flush (-TF) reflector in sheetrock ceiling; 4” (102mm) dia hole is required ............TF RING/3

LIGHTPLATEDOWNLIGHT SPOT

straight-cut baffle for downlighting

LAMP INFORMATION

GE Philips Venture SLi

20 watt CMH20MR16 CDM-Rm Mini 20W MPC 20W/U/MR16/PS MBS ES16 20W

39 watt CMH39MR16* CDM-Rm Mini 35W* MPC 39W/U/MR16/PS* MBS ES16 39W*Lamps with 90 CRI available

THREE MR MH DL

COEFFICIENTS OF UTILIZATION – ZONAL CAVITY METHOD (Effective Floor Cavity Reflectance 20%)Ceiling Reflectance (%) 80 70 50 30 10 0

Wall Reflectance (%) 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0

Room Cavity Ratio

0 101 101 101 101 98 98 98 98 94 94 94 90 90 90 86 86 86 85 1 97 95 93 92 95 93 92 90 90 89 88 87 86 85 84 83 82 81 2 93 90 87 85 92 89 86 84 86 84 82 83 82 80 81 80 79 77 3 90 85 82 79 88 84 81 79 82 80 78 80 78 76 78 77 75 74 4 87 81 78 75 85 81 77 74 79 76 74 77 75 73 76 74 72 71 5 83 78 74 71 82 77 73 71 76 73 70 74 72 70 73 71 69 68 6 80 75 71 68 79 74 70 67 73 69 67 72 69 67 71 68 66 65 7 78 71 67 65 77 71 67 64 70 67 64 69 66 64 68 66 64 63 8 75 69 65 62 74 68 64 62 67 64 62 67 64 61 66 63 61 60 9 73 66 62 60 72 66 62 59 65 62 59 64 61 59 64 61 59 58 10 70 64 60 57 69 63 60 57 63 59 57 62 59 57 62 59 57 56

CANDLEPOWER DISTRIBUTION Vertical Angle

0 2071 5 2099 15 1435 25 333 35 111 45 21 55 0 65 0 75 0 85 0 90 0

Candela

LUMINANCE DATA Vertical Angle

45 6631 55 0 65 0 75 0 85 0

Candela/m2

To convert cd/m2 to footlamberts multiply by 0.2919.

ZONAL LUMEN SUMMARY Zone Lumens % Lamp % Fixture

0 – 30° 757 75.7 89.5 0 – 40° 826 82.6 97.7 0 – 60° 846 84.6 100.0 0 – 90° 846 84.6 100.0 90 –180° 0 0.0 0.0 0 –180° 846 84.6 100.0

BALLAST INFORMATION Voltage 120 277 Input Watts 25 26 Line Current (A) .20 .09 Power Factor (%) >95 >95 Min. Starting Temp (°F) –22 –22

PHOTOMETRIC REPORT – WIDE FLOOD Luminaire ........................recessed metal halide with spun aluminum reflector, specular finishLamp ..............................GE CMH20MR16/830/WFL, 1000 lumensEfficiency ......................84.6%Spacing Criterion .............0.6

Luminaire Testing Laboratory Report No. 20498. Original test report furnished upon request.