CHEMCUT CORPORATION 500 Science Park Road State College, PA 16803
1-800 CHEMCUT (800-243 6288) • or 814 272-2800 • Fax 814 272-5205 email: [email protected] • www.chemcut.net
���������
Chemical Milling • Sign & Nameplate • Printed Circuit Board • Metal Finishing • Waste Treatment Systems
�
features
��� ���������
• 24 Inch Wide Paper
• 11 Micro Filter Media
• Integral 1.5 HP Pump
• Automatic Filter Media Advance
• Able To Reduce Water Usage By
More Than 80 Percent
• Suitable Most Scrubbing and
Deburring Operations
The Chemcut Model 936 Web Filtering System efficiently removes metal fines, brush particles, oils and other contaminates from coolant and rinse water used in mechanical cleaning and finishing systems. The Model 936 controls water pollution as fines and particles are trapped in the filter paper for easy and cost effective disposal. The filtered water can then be reused in the process reducing water consumption considerably.
• Point of Source treatment o Removes metal fines
and brush particles from coolant and rinse water
o Removes oil and other contaminants from coolant and rinse water
o Effluent filtering o Input filtering
• Reduces water consumption • Reduces waste water
generation
��� ���������
CHEMCUT CORPORATION 500 Science Park Road State College, PA 16803
1-800 CHEMCUT (800-243 6288) • or 814 272-2800 • Fax 814 272-5205 email: [email protected] • www.chemcut.net
�
Operation Filtering is accomplished with a filtering media that advances automatically from its supply roll as it becomes saturated with trapped particles. When the roll is depleted, the web stops and the system is shut down automatically. A new roll can be installed in less than 5 minutes. Water is automatically added to the system to compensate for loss due to evaporation. The machine’s interlocks guard against fluid overflow. The spent filtering media is collected in a receptacle for easy disposal.
Specifications
Web Size 24 ½ in. (623mm) wide x 250 yds. (228.6 m) long
Overall Size 52 in. (1321mm) long, 34 in. (864mm) wide, 28 in. (711 mm) high
Construction Corrosion-resistant PVC and Stainless steel
Sump Capacity 35 gal. (132.5 liters) max
Pump 1.5 hp (1.12 kW)
Power Required 208/220-240/380/440-480 volts, 3 phase, 50/60 Hz, 1.5 kVA
Web Advance 1/20 hp (0.037 kW), 110 volts AC, 113 in.-lbs. (12.76 Nm) torque
Water Cycling Capacity 25 gpm (94.6 liters/min.)
Shipping Weight 450 pounds (204 kg)