Due to the changes of constant improvement in LED technology, all details are subject to change without notice. Consult factory for up to date information. www.iuseelite.com 3” 3 Inch Recessed Gimbal with Reflector RL372 FEATURES LED adjustable gimbal downlight with 360-degree rotation and 30-degree tilt. Engineered for new construction, remodel, or retrofit to accommodate insulated or dropped ceilings. Remote driver allows easy installation and maintenance. Small aperture and shallow depth are ideal for unlimited applications. NOMINAL LUMENS DELIVERED LUMENS WATTAGE 600 641 8W Based on 3000K, 90+ CRI. Actual wattage may vary +/- 5% 2-3/8” 4-3/8” 3-1/8” Cut hole in ceiling. Insert luminaire into opening by squeezing spring clips on both sides of luminaire. The width in ceiling needed for the driver to fit is 3”. INSTALLATION • IC-Rated and Air-Tight ready and may be in direct contact with insulation. • Can be installed in applications with limited plenum clearance. • May be installed in drywall or suspended ceilings. • Flicker-free 120V forward-phase Triac dimming down to 5%. • Even illumination of luminaire is achieved by utilizing patent-pending optics along with edgelit LED technology. • Aluminum die-cast body and trim. 2.3” 1.4” 3.1” 7” 4” LUMENS DIMMING CCT COLOR QUALITY CRI EMERGENCY LIFETIME CONSTRUCTION TRIM OPTION BEAM ANGLE COLORS 600 DIMTR (Triac) 27K, 30K, 35K, 40K 3-Step MacAdam Ellipse 90+ 16W high voltage inverter L70 at 50,000 Hours Aluminum die-cast body and trim Round Adjustable 30 Degrees WH (White-standard) PHOTOMETRIC TESTS In Accordance with IES LM79-08, LM80 and TM-30, TM-21 • ETL Listed for damp location.
Transcript
Due to the changes of constant improvement in LED technology, all details are subject to change without notice. Consult factory for up to date information. w w w . i u s e e l i t e . c o m
SLIM SURFACE LEDProject Name:
Note: Type:
Catalog Number:
Submittal form is available @ www.iuseeliteled.comTel: 323-888-1973 • Fax: 323-888-1977
Specifications and Dimensions subject to change without notice.
Note: A 2-1/8” deep octagon junction box is recommended for through circuit wiring applications.
Compatible Junction Boxes:
ENGINEERED FOR VERSATILITY AND PERFORMANCEThe Elite LED Slim Surface Mount has been engineered to install into most standard junctions boxes. Up to 1500 usable lumens are directed from the luminaire to the work surface. Easy to Install, applicable toJunction Box or Recessed Can Installation
OPTICSThe Elite LED Module system is much more than just a simple LED retrofit.The Elite LED system is a highly engineered work of design and optical science which produces up to 1500 lumens. Our meticulously crafted optics gather the light scattered by the LED chip and shape it into a functional beam with uniform light distribution.
DIMMINGIntended for Triac (120V) base on configuration. Minimum 90º supply conductors.
COMPLIANCENon-conductive fixture for shower light application. Product complies with the requirements of the California Energy Commission regulated under Title 24.
LISTINGETL listed for damp location (wet location - with covered ceilings)Energy Star certified
WARRANTYThe Elite LED lighting system carries a five-year carefree warranty for parts and components. (Labor not included)
12”
9”
7-7/8”5-3/8”
3”3 Inch Recessed Gimbal with ReflectorRL372
FEATURESLED adjustable gimbal downlight with 360-degree rotation and 30-degree tilt. Engineered for new construction, remodel, or retrofit to accommodate insulated or dropped ceilings. Remote driver allows easy installation and maintenance. Small aperture and shallow depth are ideal for unlimited applications.
NOMINAL LUMENS DELIVERED LUMENS WATTAGE
600 641 8W
Based on 3000K, 90+ CRI. Actual wattage may vary +/- 5%
S H I P P I N G AVA I L A B L E
436
3”
I S S U E 1 5 G 2 1 R e v . 0 . 1
WWW.IUSEELITE.COM • TEL 1-877-375-5555 • FAX 1-877-375-3333
RL372 LED3” GIMBAL LED FIXTURE WITH REFLECTOR
DIMENSION
15”
2-3/4”
1-3/4”
2”
600
3” GIMBAL LED FIXTURE WITH REFLECTORw 2-3/8” THICK LED FIXTURE WITH HIGHER BRIGHTNESSw FOR NEW CONSTRUCTION – INSULATED AND DROPPED CEILINGS
w FEATURES3” fixtures with integral LEDs. Isolated external driver factory installed inside junction box.One driver for every fixture required. PF>0.98.
w Cast aluminum trim
w Dimmable
w ETL approved and Energy Star Certified
w Type IC Rated – Approved for direct contact with insulation
w Air-tight and damp location approved
w Fast and easy to install in limited space locations
w External driver factory mounted inside connection box - 120V
w New construction rough-in plates and jumper cables available
w Available Temperatures (3000K, 3500K and 4000K)
w 50,000 Hours Life; 5 Year Warranty
TECHNICAL SPECIFICATIONS
w WATTAGES: 8W
w OUTPUT: Default Driver Voltage: 120V AC 60 Hz (Dimmable)
w CRI: 90+
w AMBIENT TEMPERATURE: -40°F (-40°C) to +104°F (+40°C)
CERTIFICATIONS• ETL listed• ENERGY STAR
INSTALLATION
• Cut hole in ceiling and snap fixture in opening with attached spring clips. Space in ceiling needed for the driver to fit through the ceiling height – 3".
INPUT VOLT. INPUT FREQ. THD POWER FACTOR INPUT POWER LUMENS
120 60Hz <20% >0.98 8W(+/-5%) 600L
RL-ACC-SLIM-1-10F10-ft long extension
RL-ACC-SLIM-1-20F20-ft long extension
RL-ACC-SLIM-3-ROUGHPLATE
TYPE LUMEN CCT CRI FINISH ACCESSORIES
RL372 o 600L-DIMTR-120 o 30Ko 35Ko 40K
90+ o WH (White) o RL-ACC-SLIM-1-10Fo RL-ACC-SLIM-1-20Fo RL-ACC-SLIM-3-Roughplate
EXAMPLE: RL372-600L-DIMTR-120-30K-90-WH
2-3/8”
4-3/8”
30º TILT AND 360º ROTATION
3-1/8”
Cut hole in ceiling. Insert luminaire into opening by squeezing spring clips on both sides of luminaire. The width in ceiling needed for the driver to fit is 3”.
INSTALLATION
• IC-Rated and Air-Tight ready and may be in direct contact with insulation.• Can be installed in applications with limited plenum clearance.• May be installed in drywall or suspended ceilings.• Flicker-free 120V forward-phase Triac dimming down to 5%.• Even illumination of luminaire is achieved by utilizing patent-pending optics
along with edgelit LED technology.• Aluminum die-cast body and trim.
22.3”
1.4”
3.1”
7”
4”
LUMENS
DIMMING
CCT
COLOR QUALITY
CRI
EMERGENCY
LIFETIME
CONSTRUCTION
TRIM OPTION
BEAM ANGLE
COLORS
600
DIMTR (Triac)
27K, 30K, 35K, 40K
3-Step MacAdam Ellipse
90+
16W high voltage inverter
L70 at 50,000 Hours
Aluminum die-cast body and trim
Round Adjustable
30 Degrees
WH (White-standard)
PHOTOMETRIC TESTS In Accordance with IES LM79-08, LM80 and TM-30, TM-21
• ETL Listed for damp location.
Due to the changes of constant improvement in LED technology, all details are subject to change without notice. Consult factory for up to date information. w w w . i u s e e l i t e . c o m
1”3 Inch Recessed Gimbal with ReflectorRL372
EXAMPLE: RL372-600L-DIMTR-120-30K-90-WH
5-7/8”
3-1/2”
7”
2-3/4”
4” Opening
13-7/8”
3” Opening 2” Opening
26"
6 18 "
2 34 "
4 12 "
13"
3 116 "
316 "
26"
13" 2 1516 "
6 18 "
4 12 "
3 116 "
316 "
4 14 "
26"13"
6 18 " 4 9
16 "
3 116 "
316 "
26” 13”
4-1/2”
2-15/16”
3-1/16”
3/16”
6-1/8”
TYPE LUMEN CCT CRI FINISHRL372 o 600L-DIMTR-120 o 27K
o 30Ko 35Ko 40K
o 90+ o WH - White (Standard)
RL-ACC-SLIM-1-10F
442
2”
I S S U E 1 5 G 2 1 R e v . 0 . 1
WWW.IUSEELITE.COM • TEL 1-877-375-5555 • FAX 1-877-375-3333
S H I P P I N G AVA I L A B L E
1” GIMBAL LED FIXTURE WITH REFLECTORw 1-5/8” THICK LED FIXTURE WITH HIGHER BRIGHTNESSw FOR NEW CONSTRUCTION – INSULATED AND DROPPED CEILINGS
w FEATURES1” fixtures with integral LEDs. Isolated external driver factory installed inside junction box.One driver for every fixture required. PF>0.98.
w Cast aluminum trim
w Dimmable
w ETL approved and Energy Star Certified
w Type IC Rated – Approved for direct contact with insulation
w Air-tight and damp location approved
w Fast and easy to install in limited space locations
w External driver factory mounted inside connection box - 120V
w New construction rough-in plates and jumper cables available
w Available Temperatures (3000K, 3500K and 4000K)
w 50,000 Hours Life; 5 Year Warranty
TECHNICAL SPECIFICATIONS
w WATTAGES: 5W
w OUTPUT: Default Driver Voltage: 120V AC 60 Hz (Dimmable)
w CRI: 90+
w AMBIENT TEMPERATURE: -40°F (-40°C) to +104°F (+40°C)
w ADJUSTABLE: 30º tilt and 360º rotation
CERTIFICATIONS• ETL listed• ENERGY STAR
INSTALLATION
• Cut hole in ceiling and snap fixture in opening with attached spring clips. Space in ceiling needed for the driver to fit through the ceiling height – 3".
360DIMENSION
INPUT VOLT. INPUT FREQ. THD POWER FACTOR INPUT POWER LUMENS
120 60Hz <20% >0.98 5W(+/-5%) 360L
12-7/8”
2-3/4”
1-3/4”
2”
TYPE LUMEN CCT CRI FINISH ACCESSORIES
RL173 o 360L-DIMTR-120 o 30Ko 35Ko 40K
90+ WH o RL-ACC-SLIM-1-10Fo RL-ACC-SLIM-1-20F
EXAMPLE: RL173-360L-DIMTR-120-30K-90-WH
RL-ACC-SLIM-1-10F10-ft long extension
RL-ACC-SLIM-1-20F20-ft long extension
2
INC
H
LE
D
RE
TR
OF
IT
MO
DU
LE
RL173 LED1” GIMBAL LED FIXTURE WITH REFLECTOR
2-1/2”
1-5/8”
442
2”
I S S U E 1 5 G 2 1 R e v . 0 . 1
WWW.IUSEELITE.COM • TEL 1-877-375-5555 • FAX 1-877-375-3333
S H I P P I N G AVA I L A B L E
1” GIMBAL LED FIXTURE WITH REFLECTORw 1-5/8” THICK LED FIXTURE WITH HIGHER BRIGHTNESSw FOR NEW CONSTRUCTION – INSULATED AND DROPPED CEILINGS
w FEATURES1” fixtures with integral LEDs. Isolated external driver factory installed inside junction box.One driver for every fixture required. PF>0.98.
w Cast aluminum trim
w Dimmable
w ETL approved and Energy Star Certified
w Type IC Rated – Approved for direct contact with insulation
w Air-tight and damp location approved
w Fast and easy to install in limited space locations
w External driver factory mounted inside connection box - 120V
w New construction rough-in plates and jumper cables available
w Available Temperatures (3000K, 3500K and 4000K)
w 50,000 Hours Life; 5 Year Warranty
TECHNICAL SPECIFICATIONS
w WATTAGES: 5W
w OUTPUT: Default Driver Voltage: 120V AC 60 Hz (Dimmable)
w CRI: 90+
w AMBIENT TEMPERATURE: -40°F (-40°C) to +104°F (+40°C)
w ADJUSTABLE: 30º tilt and 360º rotation
CERTIFICATIONS• ETL listed• ENERGY STAR
INSTALLATION
• Cut hole in ceiling and snap fixture in opening with attached spring clips. Space in ceiling needed for the driver to fit through the ceiling height – 3".
360DIMENSION
INPUT VOLT. INPUT FREQ. THD POWER FACTOR INPUT POWER LUMENS
120 60Hz <20% >0.98 5W(+/-5%) 360L
12-7/8”
2-3/4”
1-3/4”
2”
TYPE LUMEN CCT CRI FINISH ACCESSORIES
RL173 o 360L-DIMTR-120 o 30Ko 35Ko 40K
90+ WH o RL-ACC-SLIM-1-10Fo RL-ACC-SLIM-1-20F
EXAMPLE: RL173-360L-DIMTR-120-30K-90-WH
RL-ACC-SLIM-1-10F10-ft long extension
RL-ACC-SLIM-1-20F20-ft long extension
2
INC
H
LE
D
RE
TR
OF
IT
MO
DU
LE
RL173 LED1” GIMBAL LED FIXTURE WITH REFLECTOR
2-1/2”
1-5/8”
442
2”
I S S U E 1 5 G 2 1 R e v . 0 . 1
WWW.IUSEELITE.COM • TEL 1-877-375-5555 • FAX 1-877-375-3333
S H I P P I N G AVA I L A B L E
1” GIMBAL LED FIXTURE WITH REFLECTORw 1-5/8” THICK LED FIXTURE WITH HIGHER BRIGHTNESSw FOR NEW CONSTRUCTION – INSULATED AND DROPPED CEILINGS
w FEATURES1” fixtures with integral LEDs. Isolated external driver factory installed inside junction box.One driver for every fixture required. PF>0.98.
w Cast aluminum trim
w Dimmable
w ETL approved and Energy Star Certified
w Type IC Rated – Approved for direct contact with insulation
w Air-tight and damp location approved
w Fast and easy to install in limited space locations
w External driver factory mounted inside connection box - 120V
w New construction rough-in plates and jumper cables available
w Available Temperatures (3000K, 3500K and 4000K)
w 50,000 Hours Life; 5 Year Warranty
TECHNICAL SPECIFICATIONS
w WATTAGES: 5W
w OUTPUT: Default Driver Voltage: 120V AC 60 Hz (Dimmable)
w CRI: 90+
w AMBIENT TEMPERATURE: -40°F (-40°C) to +104°F (+40°C)
w ADJUSTABLE: 30º tilt and 360º rotation
CERTIFICATIONS• ETL listed• ENERGY STAR
INSTALLATION
• Cut hole in ceiling and snap fixture in opening with attached spring clips. Space in ceiling needed for the driver to fit through the ceiling height – 3".
360DIMENSION
INPUT VOLT. INPUT FREQ. THD POWER FACTOR INPUT POWER LUMENS
120 60Hz <20% >0.98 5W(+/-5%) 360L
12-7/8”
2-3/4”
1-3/4”
2”
TYPE LUMEN CCT CRI FINISH ACCESSORIES
RL173 o 360L-DIMTR-120 o 30Ko 35Ko 40K
90+ WH o RL-ACC-SLIM-1-10Fo RL-ACC-SLIM-1-20F
EXAMPLE: RL173-360L-DIMTR-120-30K-90-WH
RL-ACC-SLIM-1-10F10-ft long extension
RL-ACC-SLIM-1-20F20-ft long extension
2
INC
H
LE
D
RE
TR
OF
IT
MO
DU
LE
RL173 LED1” GIMBAL LED FIXTURE WITH REFLECTOR
2-1/2”
1-5/8”
RL-UNV-2/3/4For use with: 2”, 3”, 4”
Universal mounting plate
RL-ACC-SLIM-3-ROUGHPLATERough-in plate for use with 3” downlights
SLIM TRIM ACCESSORIES
OPTIONSo RL-ACC-SLIM-1-10F - 10ft Long Extensiono RL-ACC-SLIM-1-20F - 20ft Long Extensiono RL-UNV-2/3/4 - Universal Mounting Plate for 2”,3” and 4”o RL-ACC-SLIM-3-ROUGHPLATE - 3” Mounting Plate
Due to the changes of constant improvement in LED technology, all details are subject to change without notice. Consult factory for up to date information. w w w . i u s e e l i t e . c o m
