basko.comCOMPENSATING FUNCTIONAL RESTRICTIONS DUE TO NEUROLOGICAL CONDITIONS
MM
-990
3 /
Stan
d: 0
9/20
15
Accessories
MultiMotion BarsAll Bars are pre-drilled for optimal attachment to the MultiMotion joints. The Bars are available
in two versions – with low and high rigidity – in different sizes and models.
Features
Material: Aluminum
Art. no.low rigidity
Art. no.high rigidity
Unit Size Bar length Bar width Bar thickness
Model
MM-701B MM-701 Set (2 bars) small 200 mm 12 mm 3,2 mm Straight
MM-705B MM-705 Set (2 bars) small 350 mm 12 mm 3,2 mm Offset
MM-709B MM-709 Set (2 bars) small 150 mm 12 mm 3,2 mm T-Bar
MM-702B MM-702 Set (2 bars) regular 200 mm 16 mm 4,0 mm Straight
MM-706B MM-706 Set (2 bars) regular 450 mm 16 mm 4,0 mm Offset
MM-710B MM-710 Set (2 bars) regular 150 mm 16 mm 3,2 mm T-Bar
MultiMotion Alignment ToolThe Alignment Tool is used for the correct alignment of the MultiMotion Dynamic Corrective System Joints on the cast
positive. This tool acquisition facilitates the orthosis production and can be used multiple times.
Features
Package contents: round T-bar and two hinge adaptor sets with screws and washers for both joints, Small and Regular.
Art. no. Unit
MM-950 Set
Selection criteria for appropriate joint sizeThe MultiMotion Corrective Joint, the Free Motion Joint and R.O.M. Joint are all available in two sizes: Small and Regular. With
these two sizes you can treat the wrist, elbow, knee, ankle and hip. When applied to the wrist, the selection criteria is: small
anatomical body joint = small joint system. When applied to the elbow - knee or ankle joint, body weight is decisive. For the
treatment of the pediatric hip joint the body height is decisive.
Body jointBody weight / height
Corrective joint Free motion joint / R.O.M. joint
Small Regular Small Regular
Wrist< 22 kg X X
> 22 kg X X
Elbow < 22 kg X X
> 22 kg X X
Knee < 22 kg X X
> 22 kg X X
Ankle < 22 kg X X
> 22 kg X X
Hip(pediatrics only)
< 105 cm X
> 105 cm X
Deviations from these recommendations are possible.
Dynamic Treatment ofcorrectable contractures
MultiMotion
Basko HealthcareNL-1505 HX Zaandam Fax: +31 (0) 75 - 612 63 73 Internet: www.basko.com
Pieter Lieftinckweg 16 Phone: +31 (0) 75 - 613 15 13
E-mail: [email protected]
1 2
MultiMotion Dynamic Corrective System Joint.
The Dynamic Corrective System Joint enables fast, efficient and adequate treatment of contractures resulting from
neurological and orthopedic conditions. The system joint is deployed in orthoses – for both children and adults.
Functionality of the MultiMotion correction joint is based on the LLPS principles (Low Load Prolonged Stretch). This process
of gradual, precise and evenly applied tension, stimulates the growth of the shortened tissue and increases joint mobility.
The use of a low, ongoing correction force extends altered tissue, thereby increasing the functionality of the joint.
Treatment of the contracture can both be done in flexion or in
extension. The selection is easy to set up by reversing the spring
from the yellow (Fig. 1) to the red side (Fig. 2) side - or vice versa.
The correct setting is depends on the respective side of the body
and contracture type.
Flexion
Flexion
Flexion
Flexion Flexion
Flexion
Flexion
Flexion
Extention
Extention
Extention
Extention Extention
Extention
Extention
Extention
Dynamic corrective system joint
MultiMotion
Indications
Apoplexy (CVA) (ICD10: I64)
Burns (ICD10: T95:9)
Cerebral palsy (ICD10: G80.9)
Cranial Brain Trauma (ICD10: S06.9)
Endoprosthesis implant
Fracture (ICD10: T14.2)
Hereditary spastic paresis (ICD10: G11.4)
Hip subluxation, congenital (ICD10: Q65.5)
Ligament rupture (ICD10: T14.-)
Multiple sclerosis (ICD10: G35)
Spastic diplegia (ICD10: G80.1)
Spastic paresis (ICD10: G82.1)
Spastic tetraparesis (ICD10: G82.4)
Spina Bifida (ICD10: Q05)
Spinal pralysis, spastic (ICD10: G11.4)
Tetraplegie, spastic (ICD10: G80.0)
Transtibial amputation (ICD10: Z89.5/Z89.7)
Triplegie, spastic (ICD10: G80.9)
Features
Torque output possible in flexion or extension
Range of Motion +120° to -120°
Adjustable flexion and extension stops:
Small in 14° increments, Regular in 12° increments
Locking- and unlocking possible in virtually any position
Torque Output; adjustable from 0 Nm to max
Medial and lateral access to torque output set screw
Material: steel/stainless steel, brass and PA/ABS plastic
MultiMotion Dynamic corrective system joint
Components The MultiMotion dynamic corrective system is a combination of two components – the corrective joint and the free motion
or R.O.M. joint. All components are available in Small and Regular sizes but may also be ordered separately. Joints are also
available as an modular system or with integrated Bars / T-bar.
Available accessories are an alignment tool and different Bar models.
Contra indication
Ankylosis (ICD10: M24.69)
Deformation of muscles and bones
Fibrosis (ICD10: M35)
Ossification (ICD10: M61.9)
Product function
Continuously adjustable dynamic extension
or flexion of the joint
Application
This dynamic corrective system joint enables an efficient and
effective treatment for dynamic correctable contractures.
Contractures presented with a neurological cause are treat-
ed according to the LLPS principle. Contractures caused due
to trauma or post surgery may and can also be treated stati-
cally during the rehabilitation phase.
Benefits for achieving therapy objectives
Improvement/rehabilitation of joint mobility
Safe and step-wise joint mobilization
Extension/mobilization of spastic musculature
Strengthening of musculature
Improvement of the resting posture
Prevention of cartilage damage and ulcers
Intended use: Treatment of correctable contractures
Functional restrictions according to ICF
Joint mobility Joint stability Muscle strength Muscle tone Movement pattern while walking
22 mm12 mm 22 mm12 mm
Corrective Joints with modular bar adapter
MultiMotion Dynamic Corrective System JointTreatment recommendation
Joint: wrist / elbow / hip / knee
Features
Proximal and distal connection: modular bar adapter
Width bar connection: 12 mm (Small), 16 mm (Regular)
Size chartArt. no. Unit Size Max. torque
outputJoint weight
Housing diameter
Joint thickness
MM-100 each regular 10,2 Nm 245 g 53 mm 29 mm
MM-200 each small 3,4 Nm 100 g 35 mm 23 mm
MultiMotion Corrective System Joint with T-BarTreatment recommendation
Joint: wrist / ankle
Features
Proximal connection: modular bar adapter
Width bar connection: 12 mm (Small), 16 mm (Regular)
Distal connection: T-bar
T-bar Length: 155 mm (Small), 175 mm (Regular)
Bar thickness: 3 mm
Size chartArt. no. Unit Size Max. torque
outputJoint weight
Housing diameter
Joint thickness
Offset T-bar
Length bottom to axis
MM-110 each regular 10,2 Nm 285 g 53 mm 29 mm 12 mm 62 mm
MM-110US each regular 10,2 Nm 290 g 53 mm 29 mm 22 mm 62 mm
MM-210 each small 3,4 Nm 120 g 35 mm 23 mm 12 mm 48 mm
MM-210US each small 3,4 Nm 125 g 35 mm 23 mm 22 mm 48 mm
Corrective Joints with integrated bars
MultiMotion Dynamic Corrective System JointTreatment recommendation
Joint: wrist / elbow / knee
Features
Proximal and distal: integrated bars
Proximal and distal bar length: 200 mm (Small) 270 mm (Regular)
Bar width: 12 mm (Small), 16 mm (Regular)
Bar thickness: 3 mm
Size chartArt. no. Unit Size Max. torque
outputJoint weight
Housing diameter
Joint thickness
MM-100I each regular 10,2 Nm 395 g 53 mm 29 mm
MM-200I each small 3,4 Nm 155 g 35 mm 23 mm
MultiMotion Dynamic Corrective System Joint with integrated T-BarTreatment recommendation
Joint: wrist / ankle
Features
Proximal: integrated bar
Proximal bar length: 200 mm (Small), 270 mm (Regular)
Distal connection: T-bar
Length T-bar: 155 mm (Small), 175 mm (Regular)
Bar width: 12 mm (Small), 16 mm (Regular)
Bar thickness: 3 mm
Size chartArt. no. Unit Size Max. torque
outputJoint weight
Housing diameter
Joint thickness
Offset T-bar
Length bottom to axis
MM-110I each regular 10,2 Nm 360 g 53 mm 29 mm 12 mm 62 mm
MM-110IUS each regular 10,2 Nm 365 g 53 mm 29 mm 22 mm 62 mm
MM-210I each small 3,4 Nm 150 g 35 mm 23 mm 12 mm 48 mm
MM-210IUS each small 3,4 Nm 155 g 35 mm 23 mm 22 mm 48 mm
22 mm
22 mm12 mm
12 mm
Free Motion Joints with integrated bars
MultiMotion Free Motion Joint with integrated barsTreatment recommendation
Joint: wrist / elbow / knee
Features
Free motion (+135° tot -135°)
Material: aluminum, steel and PA plastic
Proximal and distal: integrated bars
Proximal and distal bar length: 200 mm (Small) 270 mm (Regular)
Bar width: 12 mm (Small), 16 mm (Regular)
Bar thickness: 3 mm
Size chartArt. no. Unit Size Joint
weightHousing diameter
Joint thickness
MM-500I each regular 85 g 33 mm 14 mm
MM-505I each small 55 g 33 mm 14 mm
MultiMotion Free Motion Joint with integrated T-BarTreatment recommendation
Joint: ankle
Features
Free motion (+135° tot -135°)
Material: aluminum, steel and PA plastic
Proximal: integrated bar
Distal connection: T-bar
T-bar Length: 155 mm (Small), 175 mm (Regular)
Width bar connection: 12 mm (Small), 16 mm (Regular)
Bar thickness: 3 mm
Size chartArt. no. Unit Size Joint
weightHousing diameter
Joint thickness
Offset T-Bar
Length bottom to axis
MM-510I each regular 70 g 33 mm 14 mm 12 mm 62 mm
MM-510IUS each regular 75 g 33 mm 14 mm 22 mm 62 mm
MM-515I each small 50 g 33 mm 14 mm 12 mm 48 mm
MM-515IUS each small 55 g 33 mm 14 mm 22 mm 48 mm
Free Motion Joints with modular bar adapter
MultiMotion Free Motion JointTreatment recommendation
Joint: wrist / elbow / knee
Features
Free motion (+135° tot -135°)
Material: aluminum, steel and PA plastic
Proximal and distal connection: modular bar adapter
Width bar connection: 12 mm (Small), 16 mm (Regular)
Size chartArt. no. Unit Size Joint
weightHousing diameter
Joint thickness
MM-500 each regular 35 g 33 mm 14 mm
MM-505 each small 30 g 33 mm 14 mm
MultiMotion Free Motion Joint with T-BarTreatment recommendation
Joint: ankle
Features
Free motion (+135° tot -135°)
Material: aluminum, steel and PA plastic
Proximal connection: modular bar adapter
Distal connection: T-bar
T-bar Length: 155 mm (Small), 175 mm (Regular)
Width bar connection: 12 mm (Small), 16 mm (Regular)
Bar thickness: 3 mm
Size chartArt. no. Unit Size Joint
weightHousing diameter
Joint thickness
Offset T-Bar
Length bottom to axis
MM-510 each regular 50 g 33 mm 14 mm 12 mm 62 mm
MM-510US each regular 55 g 33 mm 14 mm 22 mm 62 mm
MM-515 each small 40 g 33 mm 14 mm 12 mm 48 mm
MM-515US each small 45 g 33 mm 14 mm 22 mm 48 mm
R.O.M. Joint with modular bar adapter
MultiMotion R.O.M. JointTreatment recommendation
Joint: wrist / elbow / knee / ankle
The R.O.M. joint is positioned on the opposite side of the affected joint and provides the desired
torsional stiffness to the orthosis. The Range of Motion of the joint is adjustable. The R.O.M. Joint
is only available with a modular bar adapter. Bars can be ordered separately as accessories.
Features
Flexion-/Extension stops are adjustable: Small: in 14° increments, Regular: in 12° increments
Material: aluminum, steel and PA plastic
Proximal and distal connection: modular bar adapter
Width bar connection: 12 mm (Small), 16 mm (Regular)
Size chartArt. no. Unit Size Joint
weightHousing diameter
Joint thickness
MM-550 each regular 40 g 33 mm 14 mm
MM-555 each small 35 g 33 mm 14 mm
ApplicationsUpper extremity
Lower extremity
Dynamic Hip Abduction System for pediatrics
MultiMotion Dynamic Hip Abduction System for pediatrics
MultiMotion Dynamic Hip Abduction SystemTreatment recommendation
Joint: hip (pediatrics)
This system is assembled on a custom made long leg orthosis and provides for a dynamic
stretch in the coronal plane (the adductors), while statically allowing the practitioner to set the rotation angle
of the hip. This allows for the leg to be positioned in a physiologically correct way and to stabilize the hip joint.
The adductors are successively, precise and evenly stretched.
Ordering Information
The MultiMotion Dynamic Hip Abduction system for children consists of two components, the Corrective Joint and
the Abduction Bars. Both components are available in size Small and Regular and can also be ordered separately from
each other.
Size chart MultiMotion Dynamic Corrective System Joint
Art.-no. Unit Size Max. torque output
Joint weight
Housing diameter
Joint thickness
Age
MM-100 each regular 10,2 Nm 245 g 53 mm 29 mm > 4 year
MM-200 each small 3,4 Nm 100 g 35 mm 23 mm < 4 year
Art.-no. Unit Size Body length
MM-HA-R set regular > 105 cm
MM-HA-S set small < 105 cm
Size chart MultiMotion Abduction Bars
Intended use: Treatment of correctable contractures of the Hip Joint
Functional restrictions according to ICF
Joint mobility Joint stability Muscle strength Muscle tone Movement pattern while walking
COMPENSATING FUNCTIONAL RESTRICTIONS DUE TO NEUROLOGICAL CONDITIONS
Indications
Diplegia, spastic (ICD10: G80.1)
Hip joint subluxation (ICD10: Q65.5)
Tetraplegia, spastic (ICD10: G80.0)
Triplegia, spastic (ICD10: G80.9)
Features
Adjustable dynamic tension / abduction
Abduction- / Adduction stops adjustable increments
12° (Small) and 14° (Regular)
Adjustable internal / external rotation (-40° to +40°)
Quick release, easily disconnects uprights from brace
Product functionality
Infinitely adjustable dynamic abduction of the hip joint
Limiting the adduction or abduction of the hip joint
Locking the hip abduction and adduction
Rotation setting of the hip
Benefits in achieving therapy targets
Improvement/restoration of joint mobility
Safe and step-wise joint mobilization
Elongation/mobilization of spastic musculature
Improvement of the resting position
Prevention of cartilage damage and ulcers
basko.comCOMPENSATING FUNCTIONAL RESTRICTIONS DUE TO NEUROLOGICAL CONDITIONS
MM
-990
3 /
Stan
d: 0
9/20
15
Accessories
MultiMotion BarsAll Bars are pre-drilled for optimal attachment to the MultiMotion joints. The Bars are available
in two versions – with low and high rigidity – in different sizes and models.
Features
Material: Aluminum
Art. no.low rigidity
Art. no.high rigidity
Unit Size Bar length Bar width Bar thickness
Model
MM-701B MM-701 Set (2 bars) small 200 mm 12 mm 3,2 mm Straight
MM-705B MM-705 Set (2 bars) small 350 mm 12 mm 3,2 mm Offset
MM-709B MM-709 Set (2 bars) small 150 mm 12 mm 3,2 mm T-Bar
MM-702B MM-702 Set (2 bars) regular 200 mm 16 mm 4,0 mm Straight
MM-706B MM-706 Set (2 bars) regular 450 mm 16 mm 4,0 mm Offset
MM-710B MM-710 Set (2 bars) regular 150 mm 16 mm 3,2 mm T-Bar
MultiMotion Alignment ToolThe Alignment Tool is used for the correct alignment of the MultiMotion Dynamic Corrective System Joints on the cast
positive. This tool acquisition facilitates the orthosis production and can be used multiple times.
Features
Package contents: round T-bar and two hinge adaptor sets with screws and washers for both joints, Small and Regular.
Art. no. Unit
MM-950 Set
Selection criteria for appropriate joint sizeThe MultiMotion Corrective Joint, the Free Motion Joint and R.O.M. Joint are all available in two sizes: Small and Regular. With
these two sizes you can treat the wrist, elbow, knee, ankle and hip. When applied to the wrist, the selection criteria is: small
anatomical body joint = small joint system. When applied to the elbow - knee or ankle joint, body weight is decisive. For the
treatment of the pediatric hip joint the body height is decisive.
Body jointBody weight / height
Corrective joint Free motion joint / R.O.M. joint
Small Regular Small Regular
Wrist< 22 kg X X
> 22 kg X X
Elbow < 22 kg X X
> 22 kg X X
Knee < 22 kg X X
> 22 kg X X
Ankle < 22 kg X X
> 22 kg X X
Hip(pediatrics only)
< 105 cm X
> 105 cm X
Deviations from these recommendations are possible.
Dynamic Treatment ofcorrectable contractures
MultiMotion
Basko HealthcareNL-1505 HX Zaandam Fax: +31 (0) 75 - 612 63 73 Internet: www.basko.com
Pieter Lieftinckweg 16 Phone: +31 (0) 75 - 613 15 13
E-mail: [email protected]
basko.comCOMPENSATING FUNCTIONAL RESTRICTIONS DUE TO NEUROLOGICAL CONDITIONS
MM
-990
3 /
Stan
d: 0
9/20
15
Accessories
MultiMotion BarsAll Bars are pre-drilled for optimal attachment to the MultiMotion joints. The Bars are available
in two versions – with low and high rigidity – in different sizes and models.
Features
Material: Aluminum
Art. no.low rigidity
Art. no.high rigidity
Unit Size Bar length Bar width Bar thickness
Model
MM-701B MM-701 Set (2 bars) small 200 mm 12 mm 3,2 mm Straight
MM-705B MM-705 Set (2 bars) small 350 mm 12 mm 3,2 mm Offset
MM-709B MM-709 Set (2 bars) small 150 mm 12 mm 3,2 mm T-Bar
MM-702B MM-702 Set (2 bars) regular 200 mm 16 mm 4,0 mm Straight
MM-706B MM-706 Set (2 bars) regular 450 mm 16 mm 4,0 mm Offset
MM-710B MM-710 Set (2 bars) regular 150 mm 16 mm 3,2 mm T-Bar
MultiMotion Alignment ToolThe Alignment Tool is used for the correct alignment of the MultiMotion Dynamic Corrective System Joints on the cast
positive. This tool acquisition facilitates the orthosis production and can be used multiple times.
Features
Package contents: round T-bar and two hinge adaptor sets with screws and washers for both joints, Small and Regular.
Art. no. Unit
MM-950 Set
Selection criteria for appropriate joint sizeThe MultiMotion Corrective Joint, the Free Motion Joint and R.O.M. Joint are all available in two sizes: Small and Regular. With
these two sizes you can treat the wrist, elbow, knee, ankle and hip. When applied to the wrist, the selection criteria is: small
anatomical body joint = small joint system. When applied to the elbow - knee or ankle joint, body weight is decisive. For the
treatment of the pediatric hip joint the body height is decisive.
Body jointBody weight / height
Corrective joint Free motion joint / R.O.M. joint
Small Regular Small Regular
Wrist< 22 kg X X
> 22 kg X X
Elbow < 22 kg X X
> 22 kg X X
Knee < 22 kg X X
> 22 kg X X
Ankle < 22 kg X X
> 22 kg X X
Hip(pediatrics only)
< 105 cm X
> 105 cm X
Deviations from these recommendations are possible.
Dynamic Treatment ofcorrectable contractures
MultiMotion
Basko HealthcareNL-1505 HX Zaandam Fax: +31 (0) 75 - 612 63 73 Internet: www.basko.com
Pieter Lieftinckweg 16 Phone: +31 (0) 75 - 613 15 13
E-mail: [email protected]