FEE SUBSIDY DECLARATION HIGH VOLTAGE SWITCHING OPERATIONS REFRESHER I (full name) Am currently working in the building & construction industry Am currently unemployed and have worked in the building & construction industry in the past 6 months Please note: If the CTF denies this subsidy application you will be required to pay the full (non-subsidised) fee immediately – persons working in the mining industry, for the government or the armed service are not eligible for the subsidy. Name of Employer (required to claim the fee subsidy) Signature Date The CTF subsidy reduces the student fee by up to 80% HIGH VOLTAGE SWITCHING OPERATIONS REFRESHER 20/06/18 | RTO code 2394 REGISTRATION FORM HIGH VOLTAGE SWITCHING OPERATIONS REFRESHER Surname First Name Unique Student Identifier (USI) refer www.usi.gov.au Date of Birth Address Suburb Postcode Telephone Facsimile Mobile Email Company Name Company ABN Company Address Suburb Postcode Company Telephone Company Email How did you find out about CET? Would you like to receive special offers and newsletters from CET? Yes No This course is only available at the Jandakot campus Course Date Do you have any of the following? Certificate III in Electrotechnology or equivalent EW Licence Number Other (please specify) Course Fees Please find enclosed: Cheque Company Purchase Order Credit Card Money Order Other (please specify) Credit Card details VISA Mastercard Card number Card expiry date Security code (3 digits on back of card) Name on card Order payable to CET for: Course Fee $1000.00 Subsidised fee $504.00 (Fees are subject to change) Paid by (if other than student, please provide name and address)
Transcript
FEE SUBSIDY DECLARATION HIGH VOLTAGE SWITCHING OPERATIONS REFRESHER
I (full name)
Am currently working in the building & construction industry Am currently unemployed and have worked in the building & construction industry in the past 6 months
Please note: If the CTF denies this subsidy application you will be required to pay the full (non-subsidised) fee immediately – persons working in the mining industry, for the government or the armed service are not eligible for the subsidy.
Name of Employer(required to claim the fee subsidy)
SignatureDate
The CTF subsidy reduces the student fee by up to 80%
HIGH VOLTAGE SWITCHING OPERATIONS REFRESHER
20/06/18 | RTO code 2394
REGISTRATION FORM HIGH VOLTAGE SWITCHING OPERATIONS REFRESHER
Would you like to receive special offers and newsletters from CET? Yes NoThis course is only available at the Jandakot campus
Course Date
Do you have any of the following? Certificate III in Electrotechnology or equivalent EW Licence Number Other (please specify)
Course Fees Please find enclosed: Cheque Company Purchase Order Credit Card Money Order
Other (please specify)
Credit Card details VISA Mastercard
Card number
Card expiry date
Security code (3 digits on back of card)
Name on card Order payable to CET for: Course Fee $1000.00 Subsidised fee $504.00
(Fees are subject to change) Paid by (if other than student, please provide name and address)
The High Voltage Switching Operations Refresher course has been developed by industry professionals to re-validate and refresh participants competency in relation to High Voltage (HV) activities. The HV refresher course meets the requirements of the Guidelines for the safe management of high voltage (HV) installations in WA.
It is recommended that this course be completed every 2-3 years as per industry standard. With a blended learning approach, students will be updated on legislation changes, industry practices and will be able to validate their skills and knowledge through the theory and practical assessments.
Successful completion will provide students and employers with a verification that participants meet the required competency levels to safely carry out High Voltage Switching.
ENTRY REQUIREMENTStatement of Attainment containing a range of units below, relevant to your industry.
CORE UNIT(S) OF COMPETENCYUEPOPS349B Operate local H.V. switchgear
UEPOPS357B Operate local L.V. switchgear
UEPOPS456A Perform switching to a switching program
UEPOPS428B Develop H.V switching programs
UEPOPS430B Control permit to work operations
UEPOPS525A Coordinate and direct switching program
UETTDREL16A Working safely near live electrical apparatus
UETTDRRF09B Apply access procedures to work on or near electrical network infrastructure
UETTDRIS67A Solve problems in energy supply network equipment
UETTDRIS44A Perform HV field switching operation to a given schedule
UETTDRSB39A Perform power system substation switching operation to a given schedule
UETTDRIS48A Develop high voltage switching schedule
UETTDRIS50A Coordinate power system permit procedures
UETTDRIS51A Coordinate and direct power system switching schedules
Students will be assessed for industry currency against the units already held. COURSE DURATIONThis course is typically delivered over 2 days in conjunction with Coex Training.
COURSE REQUIREMENTSParticipants require a previous recognised Statement of Attainment in High Voltage Switching to be eligible for an updated Statement for units that were issued in previous recognised training.
Personnel who do not hold a Statement of Attainment but have evidence of regular training and industry experience are eligible to attend but will only receive a Certificate of Attendance.
Fully enclosed shoes must be worn at all times in CET buildings.
Safety boots/shoes must be worn when working in the workshop.
Refer to the Code of Conduct at www.cet.asn.au/Terms-And-Conditions for details on dress code.
COURSE MATERIALSApplicants will be provided with all required reference materials and resources.
CERTIFICATIONSuccessful graduates will be issued with an industry current Statement of Attainment for the units they currently hold.
HOW TO ENROLTo enrol, complete and return the form over the page with full payment to the relevant campus. Your booking is not guaranteed until payment and registration has been received. Under no circumstances will registration without payment entitle you to a place on the course.
SKILLS AND NATIONAL RECOGNITION The CET Skills Recognition process benefits applicants who have undergone prior learning and recognises competencies obtained outside a formal educational or training environment, gained through life or work experience. Competencies currently held by applicants will be formally assessed against each applicable Unit of Competency and maybe recognised regardless of how, when and where they were achieved. Skills Recognition is an assessment process and a cost recovery charge will apply.
CET accepts and provides credit to learners for units of competency and/or modules (unless licensing or regulatory requirements prevent this) where these are evidenced by:
• AQF certification documentation issued by any other RTO or AQF authorised issuing organisation; or
• Authenticated VET transcript issued by the Registrar
If you believe you are entitled to Skills and/or National Recognition, we encourage you to complete an Application Form available from our administration team.
COURSE OVERVIEW
WWW.CET.ASN.AU
CET CANCELLATION POLICY All cancellations must be received in writing via mail or email
8 days+ prior to course commencement
100% fee refund
2-7 days prior to course commencement
90% fee refund
1 day or less prior to course commencement
No refund
CET TRANSFER POLICY Should a candidate wish to transfer their scheduled course date
Initial transfer request made 8 days or more prior to course commencement
No fee applies
1 to 7 days prior to course commencement
10% of full fee charge
Any subsequent requests for course transfers
10% of full fee charge
CONTACT DETAILS
JOONDALUP CAMPUS Phone (08) 9233 5000 Email [email protected] 20 Injune Way, Joondalup WA 6027Post PO Box 4, Joondalup DC WA 6919
JANDAKOT CAMPUS Phone (08) 6595 6600 Email [email protected] 5 Avior Avenue, Jandakot WA 6164 Post PO Box 3857, Success WA 6964
WWW.CET.ASN.AU
The course delivery will be facilitated and certificated by Coex Training (RTO code 41119) through an established partnership with CET.
The College of Electrical Training (CET) is the major private training provider for the Western Australian electrical and telecommunications industries.
Excellence in customer service is our priority; we offer modern ‘state of the art’ facilities and quality training by industry for industry.
