Date post: | 02-Jan-2016 |
Category: |
Documents |
Upload: | julius-walker |
View: | 222 times |
Download: | 0 times |
Feeder Jig View • Offset in Y axis (L/R)
– Can Be change by Software• Offset in X axis is the same mechanical
for Left and Right side (L/R)
X Axis (Mechanical)
Y Ax
is (S
oftw
are)
Origin Offset
Origin Offset in the right Side
Changing the jig to the Right side, the adjust in the X axis is Complete because the mechanical offset was
completed in the Left Side