Date post: | 10-Jan-2017 |
Category: |
Documents |
Upload: | tracy-edwards |
View: | 120 times |
Download: | 0 times |
FRONTIERFRONTIEREquipment Manufacturing
FRONTIERFRONTIEREquipment Manufacturing
#106 3921 - 81 Ave. Leduc, AlbertaTelephone: (587) 409-4093
Email: [email protected]
Product Overview
FRONTIERFRONTIEREquipment Manufacturing
SpoolersFRONTIERFRONTIEREquipment Manufacturing
FRONTIERFRONTIEREquipment Manufacturing
#106 3921 - 81 Ave. Leduc, AlbertaTelephone: (587) 409-4093
Email: [email protected]
Our spoolers can be truck mounted, trailer mounted, or skid mounted - enabling operation
both in the field and in the shop.
The multispooler is a trailer mounted piece of equipment made to spool and unspool cable from cable reel. Being able to accommodate up to 6 spool simultaneously, the multispooler is essential for handling downhole control equipment with multi-sensors. This FEM designed machine is the first of it's kind in the industry. All the spools are run by individual hydraulically driven motors controlled from a
control panel.
To build a multispooler able to handle 6 spools simultaneously, each spool has a predefine maximum speed and maximum torque to be able to control the speed and torque of every spool independently. Our multispooler is continuously being improved in tandem with field operations - adjusting our design parameters as needed to meet
operational requirements.
Du-Spooler
Uni-Spooler
Hexa-SpoolerTri-Spooler
Collapsible ReelFRONTIEREquipment Manufacturing
FRONTIERFRONTIEREquipment Manufacturing
#106 3921 - 81 Ave. Leduc, AlbertaTelephone: (587) 409-4093
Email: [email protected]
q p gEquipment Manufacturing
Single PocketDouble Pocket
Standard Configurations
Capabilities
Features
Fully Self-Contained and fits into most long-box trucksSturdy design maximize weld alignment and concentricityHigh air capacity with increased CFM for better quenchingLimit switch for automated displacementHydraulic System controlled with remotePin Storage box and 2 toolboxesHeated oxy-acetylene bottlesActuated slide-out/slide–in Repairs to broken rod
Replacement of top or bottom pinCustom pin to pin string fabrication
Removal & replacement of worn sections of rod
FFWFRONTIERFRONTIEREquipment Manufacturing
FRONTIERFRONTIEREquipment Manufacturing
#106 3921 - 81 Ave. Leduc, AlbertaTelephone: (587) 409-4093
Email: [email protected]
Pinch Roll + ShearFRONTIERFRONTIEREquipment Manufacturing
FRONTIERFRONTIEREquipment Manufacturing
#106 3921 - 81 Ave. Leduc, AlbertaTelephone: (587) 409-4093
Email: [email protected]
Fits in standard 1-tonne pickup truck
Electric over hydraulic remote control
Total self contained
Stabilize outriggers
Hydraulic Tank
Rod Shear
Generator
Actuated Slide OutElectrical Control Box
RPUFRONTIERFRONTIEREquipment Manufacturing
FRONTIERFRONTIEREquipment Manufacturing
#106 3921 - 81 Ave. Leduc, AlbertaTelephone: (587) 409-4093
Email: [email protected]
Standard FeaturesTotaly self contained unit in enclosed trailerAll equipment slides out for easy access20 ft trailerHydraulic power unitAir comporessorGeneratorOxy-Acetylene bottlesPinch-Roll + ShearRod Welder3 Rod handling arms
Air Compressor
Hydraulic Power Unit
Generator
Rod Cleaning Device Pinch-Roll and Shear Forging Welder
RMUFRONTIERFRONTIEREquipment Manufacturing
FRONTIERFRONTIEREquipment Manufacturing
#106 3921 - 81 Ave. Leduc, AlbertaTelephone: (587) 409-4093
Email: [email protected]
Standard ConfigurationsTri-axlesTandem driveFit any truck chasis
SpecificationsSpeed: 40m/min (125 ft/min)Capacity: up to 25 000 lbs of rod (10 000 kg)DOT approved
Standard Features2 hydraulic safety armDriving motorSpool braking systemTelescopic rod guide standPinch roller (slide out)Rod shear (slide out)3 ton picker craneService reel rack (tiltable)2 tool boxes1 cabinet
Optional FeaturesRod counterRod welder (only available on tri-axlesWireless remotePivoting pinch roller and shearHigh capacity picker craneTow behind hitchCollapsible reelTransport reel
Reel AccessoriesDevil clampReel pivoting stand
DOT approved 1 cabinet
Optional FeaturesRod counterRod welder (only available on tri-axles
Hydraulic Spool Tilt (12V hydraulic power unit)2 safety arms (pivoting or folding)Telescopic rod guide standFoldable wide load lightSpool tilt locking arm
Rod ShearPinch Roller
Spool driver motorSpool braking system
Hydraulic Safety Arms
Standard FeaturesStandard Features
p )ng)
SpoSpoo
Hydra
Pintle-Hitch Trailer
B-Train
Optional Features
FRONTIEREquipment Manufacturing
#106 3921 - 81 Ave. Leduc, AlbertaTelephone: (587) 409-4093
Email: [email protected]
TrailersFRONTIERFRONTIEREquipment Manufacturing
RMU
Pintle-Hitch Trailer
#106 3921 81 Ave Leduc Alberta
Single Fifth WheelDouble Spool Trailer
FlushbyFRONTIERFRONTIEREquipment Manufacturing
FRONTIERFRONTIEREquipment Manufacturing
#106 3921 - 81 Ave. Leduc, AlbertaTelephone: (587) 409-4093
Email: [email protected]
General workover operation for Sucker rods down hole stringWell stimulationsAssembling/disassembling of completionsPreparation of production wells for special treatmentPump and circulation operations
General Operation
General FeaturesHeavy duty ai suspensions60 series Detroit engine set between 420-500 HO to customer specificationsAllison 4700 oilfield service transmissionHigh and Low pressure manifoldLeveling jacksGuards and covers for all moving componentsMast with crown blockDrawworks winchAuxilliary winchTriplex high pressure pump2 fluid tanks with additional 400L tankFall arrest device located at crown
CraneFassi M20A.133 Hydraulic sectionsCorner mount articulating craneLifting capacity of 3525 lbs at 4'5"Lifting capacity of 1135 lbs at 13'3" (full extension)
Hydraulic 3000 PSI hydraulic systemHydraulic tankTouch screen control Vacuum cleanerHigh pressure filters Valve flow adjustmentCompensation pump Return filtersAccumulator system
MastCenter piece : TelescopicMax Length: 46 ftFree height over ground : 55 ftMax work length : 44 ftMax hook load : 440,000 lbsMast grade : 9 deg
PumpsTriplex Pump : SPM TWS 600 Plunger diameter: 3: Drive: hydraulic Max input: 600 BHP/447 kW Strok: 6:/152.4mmLoading Pump : Gear pump Q max: 800 l/min p max: 7 barBooster Pump : Centrifugal pump Q max: 1000 l/min p max: 5 bar
WinchesMain Winch : Pullmaster HL25 25,000 lbs single line pull in low gear 5,350 lbs single line pull in high gear Meets API 7K, ISO 14693, API SPEC Q1, ISO - TS 29001Secondary Winch : Pullmaster PL5 4000 lbs capacity
Standalone Rig FRONTIERFRONTIEREquipment Manufacturing
FRONTIERFRONTIEREquipment Manufacturing
#106 3921 - 81 Ave. Leduc, AlbertaTelephone: (587) 409-4093
Email: [email protected]
Slanted operationOperator protection systemTouch screens and joysticksRemotely operated safety locking systemElectric over hydraulic system saves 2/3 of hydraulic hosesOptical Reader (diameter, speed, length) - realtime pull load and feedIntegrated H2S detection system with visual, auditory and remote alarmsBuilt-in working lights
Standard Features