Fenland Product Data Sheet Edition 08.2019/v1 Fenland Pantile Size (overall) 381 x 227mm Minimum Pitch and Headlap Smooth17.5° at 100mm headlap / 22.5° at 75mm headlap Sanded 17.5° at 100mm headlap / 25° at 75mm headlap Maximum Pitch (subject to fixing specification) 90° Maximum Headlap 125mm Minimum Gauge/Batten Spacing 256mm Maximum Gauge/Batten Spacing Smooth below 22.5° at 281mm 22.5° and over 306mm Sanded below 25° at 281mm / 25° and over 306mm Hanging Length (approx.) 362mm Cover (all figures are net and do not allow for wastage) Linear cover of 1 tile 200mm Covering capacity at max gauge 17.8 tiles/m² at 281mm gauge 16.3 tiles/m² at 306mm gauge Weight (at max. gauge approx.)* 45kg/m² at 281mm gauge / 42kg/m² at 306mm gauge per pallet, including pallet (approx.) 0.91tonnes per 1000 2.55 tonnes Battens Required (at max. gauge) 3.27m/m 2 Batten Size Rafter centres up to 450mm 38 x 25mm Rafter centres up to 600mm 50 x 25mm Fixing Clips Eaves, Verge & Tile Clips Nail Size for Tiles** 45 x 3mm (A/A) Pallet Quantities Tiles per pallet 336 / Tiles per pack 42 / Packs per pallet 8 *All weights nominal ** (A/A) Aluminium Alloy KEY ADVANTAGES Gentle curve for soft yet distinctive effect Economical concrete alternative to clay Recessed front for a slim leading edge appearance FITTINGS & ACCESSORIES HIP PRODUCTS Third Round Hip Rapid Hip VALLEY PRODUCTS GRP 125 Valley Dry Valley RIDGE PRODUCTS Half Round Ridge Half Round Monoridge VENTILATION SYSTEMS RedVent EavesVent RedVent 25 Over-Fascia Vent Rapid EavesVent Rapid Vented Ridge Uni-Vent Rapid Ridge/Hip 4.5k ThruVent Tile PRODUCT DETAILS A natural successor to the distinctive single clay pantiles that characterise so much of the south-east and East Anglia. The Fenland Pantile is a cost-effective and convenient alternative to traditional clay. 30 Slate Grey 34 Terracotta 36 Tudor Brown 39 Farmhouse Red 52 Breckland Brown 63 Black (Coated) 227mm 381mm
Transcript
Fenland Product Data Sheet Edition 08.2019/v1
Fenland Pantile
Size (overall) 381 x 227mm
Minimum Pitch and Headlap Smooth17.5° at 100mm headlap / 22.5° at 75mm headlap Sanded 17.5° at 100mm headlap / 25° at 75mm headlap
Maximum Pitch (subject to fixing specification) 90°
Maximum Headlap 125mm
Minimum Gauge/Batten Spacing 256mm
Maximum Gauge/Batten Spacing Smooth below 22.5° at 281mm 22.5° and over 306mm
Sanded below 25° at 281mm / 25° and over 306mm
Hanging Length (approx.) 362mm
Cover (all figures are net and do not allow for wastage) Linear cover of 1 tile 200mm Covering capacity at max gauge 17.8 tiles/m² at 281mm gauge 16.3 tiles/m² at 306mm gauge
Weight (at max. gauge approx.)* 45kg/m² at 281mm gauge / 42kg/m² at 306mm gauge per pallet, including pallet (approx.) 0.91tonnes per 1000 2.55 tonnes
Battens Required (at max. gauge) 3.27m/m2
Batten Size Rafter centres up to 450mm 38 x 25mm Rafter centres up to 600mm 50 x 25mm
Fixing Clips Eaves, Verge & Tile Clips
Nail Size for Tiles** 45 x 3mm (A/A)
Pallet Quantities Tiles per pallet 336 / Tiles per pack 42 / Packs per pallet 8*All weights nominal **(A/A) Aluminium Alloy
KEY ADVANTAGES Gentle curve for soft yet distinctive effectEconomical concrete alternative to clay Recessed front for a slim leading edge appearance
A natural successor to the distinctive single clay pantiles that characterise so much of the south-east and East Anglia. The Fenland Pantile is a cost-effective and convenient alternative to traditional clay.
30 Slate Grey 34 Terracotta 36 Tudor Brown 39 Farmhouse Red
52 Breckland Brown 63 Black (Coated)
227mm
381mm
We are committed to continuously enhancing and improving our product range. We reserve the right to change our product specifications. We reserve the right to correct any typographical or clerical error or omission. For the latest information contact customer service.
DryVerge (Pack of 18 LH & 18 RH) 9390DryVerge Gable End Pack 9880Rapid DryVerge (Pack of 18 LH & 18 RH) 9391
Rapid DryVerge Gable End Pack 9881
HIP PRODUCTS
Continuous Hip (5m) 9502Third Round Hip/Ridge Junction 9521Uni-Vent Rapid Ridge/Hip (10m) 9313Uni-Vent Rapid Hip Support Tray (1.2m) 9069Third Round Hip (without nail holes) 8122Third Round Hip (with nail holes) 7411Hip Iron 9258Third Round Block-End Hip 7784Dentil Slip 7172Mortar Bedded Fixing Kit 9314
VALLEY PRODUCTS
GRP 125 Valley (3m) 9595Dry Valley (Low Profile)(3m) 9574Universal Valley Trough Tile 7175
