Festool May June Campaign - C&L

Em

ail:

Sal

es@

clto

olce

ntr

e.co

m.a

u6 Armada Place, Banyo QLD 4014 Ph: 07 3326 1555 Fax: 07 3326 1599Email: [email protected]

P

h:

07

- 3

32

6 1

55

5

Faster. Easier. Better.

ENDS JUNE 30, 2016

www.festool.com.au

Saver saver

SYSTEM SOLUTIONS

see page 4 see page 12see page 9

SYSTEMFS Guide Rail Bag

BONUS

Limited Edition Jigsaw Blade Set

BONUS

Pair a Festool power tool with a dust extractor and save $100*

Bonus guide rail bags Sander specials Limited edition jigsaw blades

* Refer to page 3 for T&C’s

Em

ail:

Sal

es@

clto

olce

ntr

e.co

m.a


P

h:

07

- 3

32

6 1

55

5

2 3Faster. Easier. Better. www.festool.com.au

The Festool flat filter saves space, allowing full use of the container’s capacity

Whether it’s a quick saw cut or surface treatment, the extractor automatically turns on and off with the power tool

Keep organised with an integrated systainer docking station - connect and stack all your systainers for easy transport and storage

Store away the hose for fast pack up and easy transport

DUST FREE SYSTEM SOLUTIONS

To find the right system solution for your application, be sure to visit your local Festool Dealer.

Festool Premium Shops offer the complete range and expert advice with an in-store test centre where you can try before you buy.

Partner Plus stores also offer a comprehensive product range with knowledgeable trained staff ready to help you.

Terms & ConditionsThe prices shown in the matrix above reflect the special system price with $100 saving on the dust extractor + Festool power tool combination. The system saving is strictly available on the featured dust extraction models, when paired with a Festool power tool that is compatible with dust extraction (excludes drills and other extractors). This offer is only available via dealer stores (not available online).

CT Mini CT Midi CT 26 CT 36 CT 36 HD7.5 Litre / 584155 Compact and mobile

15 Litre / 584164 Portable worksite extractor

26 Litre / 583494 For the workshop or the worksite

36 Litre / 583495 Compact but with large volume

36 Litre / 584169 Ideal for concrete dust

PAIR ANY FESTOOL POWER TOOL WITH A DUST EXTRACTOR & SAVE $100*

Example of special prices shown in matrix below

160mm Plunge Cut Saw with FS 1400 guide rail TS 55 / 561655 $1,748 $1,798 $2,168 $2,268 $2,449


Jigsaw PS 300 / 561444PSB 300 / 561454 $1,249 $1,299 $1,669 $1,769 $1,950

Orbital Sander ETS 150/3 / 571905ETS 150/5 / 571919 $1,214 $1,264 $1,634 $1,734 $1,915

Linear Sander LS 130 / 567770 $1,394 $1,444 $1,814 $1,914 $2,095

Delta Sander DTS 400 / 567870 $1,298 $1,348 $1,718 $1,818 $1,999

65mm Planer EHL 65 / 574559 $1,298 $1,348 $1,718 $1,818 $1,999

Router OF1400 / 574346 $1,864 $1,914 $2,284 $2,384 $2,565

Diamond Grinder RG 80 / 768973 Not Recommended $2,505*


SYSTEM

HEPAFILTER

Emai

l: S

ales

@cl

tool

cen

tre.

com

.au

6 Armada Place, Banyo QLD 4014 Ph: 07 3326 1555 Fax: 07 3326 1599Email: [email protected]

P

h:

07

- 3

32

6 1

55

5


The Festool flat filter saves space, allowing full use of the container’s capacity

Whether it’s a quick saw cut or surface treatment, the extractor automatically turns on and off with the power tool

Keep organised with an integrated systainer docking station - connect and stack all your systainers for easy transport and storage

Store away the hose for fast pack up and easy transport

DUST FREE SYSTEM SOLUTIONS

To find the right system solution for your application, be sure to visit your local Festool Dealer.

Festool Premium Shops offer the complete range and expert advice with an in-store test centre where you can try before you buy.

Partner Plus stores also offer a comprehensive product range with knowledgeable trained staff ready to help you.

Terms & ConditionsThe prices shown in the matrix above reflect the special system price with $100 saving on the dust extractor + Festool power tool combination. The system saving is strictly available on the featured dust extraction models, when paired with a Festool power tool that is compatible with dust extraction (excludes drills and other extractors). This offer is only available via dealer stores (not available online).

CT Mini CT Midi CT 26 CT 36 CT 36 HD7.5 Litre / 584155 Compact and mobile

15 Litre / 584164 Portable worksite extractor

26 Litre / 583494 For the workshop or the worksite

36 Litre / 583495 Compact but with large volume

36 Litre / 584169 Ideal for concrete dust

PAIR ANY FESTOOL POWER TOOL WITH A DUST EXTRACTOR & SAVE $100*

Example of special prices shown in matrix below



Jigsaw PS 300 / 561444PSB 300 / 561454 $1,249 $1,299 $1,669 $1,769 $1,950

Orbital Sander ETS 150/3 / 571905ETS 150/5 / 571919 $1,214 $1,264 $1,634 $1,734 $1,915

Linear Sander LS 130 / 567770 $1,394 $1,444 $1,814 $1,914 $2,095

Delta Sander DTS 400 / 567870 $1,298 $1,348 $1,718 $1,818 $1,999

65mm Planer EHL 65 / 574559 $1,298 $1,348 $1,718 $1,818 $1,999

Router OF1400 / 574346 $1,864 $1,914 $2,284 $2,384 $2,565



SYSTEM

HEPAFILTER

Em

ail:

Sal

es@

clto

olce

ntr

e.co

m.a


P

h:

07

- 3

32

6 1

55

5


160mm Cordless Circular Saw HKC 55 with FSK 420 guide rail | 201580 • Power 18V• Cutting depth 0-55mm• 2 x 5.2Ah batteries• TCL 3 charger • Splinterguard • Standard saw blade• FSK 420 guide rail • SYS 4 T-LOC systainer

$1,089

SPLINTER-FREE SAWING SOLUTIONS

The guide rail works with the TS Saw to ensure perfect cuts. Simply scribe a line, align the guide rail and cut.

The attachable splinterguard and guide rail work together to produce smooth, splinter free cuts on both sides of the blade.

Festool guide rails are available in eight different lengths from (800 - 5000 mm), and can be connected together with guide rail connectors.

From cutting rafters and beams, to ripping and trimming, or melamine shelving, plumb cuts and birdsmouth applications, the HKC with FSK 420 cross-cut rail will be your new go-to saw.

Sawing Accessories

Parallel side fence | 495717 $330Guide extension | 495718 $199

Gecko Suction Clamp | 493507 $142

Guide Rail Accessory Set | 497657 $345

For consistent rip cuts use the parallel side fence to eliminate markting out each cut for accurate cut each time.

FSK 420 Guide Rail Bag 2001

60

Valued at

$99

PAIR UP A SAWING SYSTEM WITH A DUST EXTRACTOR & SAVE $100*

SYSTEM

160mm Plunge Cut Saw TS 55 with FS 1400 guide rail | 561655• Power 1,200 W• Cutting depth 0-55mm• Splinterguard• 160mm fine tooth saw blade• FS 1400/2 guide rail • SYS 4 T-LOC systainer

$1,049

210mm Plunge Cut Saw TS 75 with FS 1400 guide rail | 561512• Power 1,600 W• Cutting depth 0-75mm• Splinterguard • 210mm saw blade • FS 1400/2 guide rail • SYS 4 T-LOC systainer

$1,465

160mm Cordless Plunge Cut Saw TSC 55 with FS 1400 guide rail | 201577 • Power up to 36V• Cutting depth 0-55mm• 2 x 5.2Ah batteries• TCL 3 charger • Splinterguard• 160mm fine tooth saw blade• FS 1400/2 guide rail • SYS 5 T-LOC systainer

$1,275

FS Guide Rail Bag 466357

Valued at

$115

Secure your guide rail to almost any non-porous flat surface using the Gecko Suction Clamping Set.

Comes with 2 FSZ clamps, 1 deflector, 1 combination bevel, 2 guide rail connectors, 1 splinter guard, 1 kick back stop.

Find sawing application videos online at www.festool.com.au

Premium QualityGuarantee

For the full range of Festool clamping options visit www.festool.com.au

NEW

*Bonus applies to TS plunge saw set models with FS 1400 guide rails *Bonus applies to HKC 55 set with FSK 420 rail


Emai

l: S

ales

@cl

tool

cen

tre.

com

.au


P

h:

07

- 3

32

6 1

55

5


160mm Cordless Circular Saw HKC 55 with FSK 420 guide rail | 201580 • Power 18V• Cutting depth 0-55mm• 2 x 5.2Ah batteries• TCL 3 charger • Splinterguard • Standard saw blade• FSK 420 guide rail • SYS 4 T-LOC systainer

$1,089

SPLINTER-FREE SAWING SOLUTIONS

The guide rail works with the TS Saw to ensure perfect cuts. Simply scribe a line, align the guide rail and cut.

The attachable splinterguard and guide rail work together to produce smooth, splinter free cuts on both sides of the blade.

Festool guide rails are available in eight different lengths from (800 - 5000 mm), and can be connected together with guide rail connectors.

From cutting rafters and beams, to ripping and trimming, or melamine shelving, plumb cuts and birdsmouth applications, the HKC with FSK 420 cross-cut rail will be your new go-to saw.

Sawing Accessories

Parallel side fence | 495717 $330Guide extension | 495718 $199

Gecko Suction Clamp | 493507 $142

Guide Rail Accessory Set | 497657 $345

For consistent rip cuts use the parallel side fence to eliminate markting out each cut for accurate cut each time.

FSK 420 Guide Rail Bag 2001

60

Valued at

$99

PAIR UP A SAWING SYSTEM WITH A DUST EXTRACTOR & SAVE $100*

SYSTEM

160mm Plunge Cut Saw TS 55 with FS 1400 guide rail | 561655• Power 1,200 W• Cutting depth 0-55mm• Splinterguard• 160mm fine tooth saw blade• FS 1400/2 guide rail • SYS 4 T-LOC systainer

$1,049

210mm Plunge Cut Saw TS 75 with FS 1400 guide rail | 561512• Power 1,600 W• Cutting depth 0-75mm• Splinterguard • 210mm saw blade • FS 1400/2 guide rail • SYS 4 T-LOC systainer

$1,465

160mm Cordless Plunge Cut Saw TSC 55 with FS 1400 guide rail | 201577 • Power up to 36V• Cutting depth 0-55mm• 2 x 5.2Ah batteries• TCL 3 charger • Splinterguard• 160mm fine tooth saw blade• FS 1400/2 guide rail • SYS 5 T-LOC systainer

$1,275

FS Guide Rail Bag 466357

Valued at

$115

Secure your guide rail to almost any non-porous flat surface using the Gecko Suction Clamping Set.

Comes with 2 FSZ clamps, 1 deflector, 1 combination bevel, 2 guide rail connectors, 1 splinter guard, 1 kick back stop.

Find sawing application videos online at www.festool.com.au

Premium QualityGuarantee

For the full range of Festool clamping options visit www.festool.com.au

NEW

*Bonus applies to TS plunge saw set models with FS 1400 guide rails *Bonus applies to HKC 55 set with FSK 420 rail


Em

ail:

Sal

es@

clto

olce

ntr

e.co

m.a


P

h:

07

- 3

32

6 1

55

5


4MM IN ONE PASS

65mm One Handed Planer EHL 65 | 574559• Parallel side fence • SYS 2 T-LOC systainer

$599

70mm Plunge Router OF 1400 | 574346• 1400 watt• 70mm plunge depth• 4.5kg • SYS 4 T-LOC systainer

$1,165

The spiral blade with drawing cut provides the highest material removal at 4mm in one pass and a smooth planing pattern.

The EHL planer has a lower operating noise level, compact design and a low centre of gravity for comfortable use.

Precise depth adjuster takes out the guess work and ensures accuracy to 1/10mm.

Weighing less than 5kg, the 1400W machine is uniquely versatile when it comes to recessing fittings or routing with templates.

PROFILING, TRENCHING & REBATING

PAIR THE 1400W ROUTER WITH A DUST EXTRACTOR & SAVE $100*

SYSTEM SYSTEM

Bonus Safety glasses F28804Tape M

easu

re 20

0358

Valued at

$73

PAIR THE 65MM PLANER WITH A DUST EXTRACTOR & SAVE $100*

Router Cutter Systainer 497695

Valued at

$135

Never lose another router bit!

* Refer to page 3 for T&C’s*Refer to page 3 for T&C’s

*cutters not included

Emai

l: S

ales

@cl

tool

cen

tre.

com

.au


P

h:

07

- 3

32

6 1

55

5


4MM IN ONE PASS

65mm One Handed Planer EHL 65 | 574559• Parallel side fence • SYS 2 T-LOC systainer

$599

70mm Plunge Router OF 1400 | 574346• 1400 watt• 70mm plunge depth• 4.5kg • SYS 4 T-LOC systainer

$1,165

The spiral blade with drawing cut provides the highest material removal at 4mm in one pass and a smooth planing pattern.

The EHL planer has a lower operating noise level, compact design and a low centre of gravity for comfortable use.

Precise depth adjuster takes out the guess work and ensures accuracy to 1/10mm.

Weighing less than 5kg, the 1400W machine is uniquely versatile when it comes to recessing fittings or routing with templates.

PROFILING, TRENCHING & REBATING

PAIR THE 1400W ROUTER WITH A DUST EXTRACTOR & SAVE $100*

SYSTEM SYSTEM

Bonus Safety glasses F28804Tape M

easu

re 20

0358

Valued at

$73

PAIR THE 65MM PLANER WITH A DUST EXTRACTOR & SAVE $100*

Router Cutter Systainer 497695

Valued at

$135

Never lose another router bit!

* Refer to page 3 for T&C’s*Refer to page 3 for T&C’s

*cutters not included

Em

ail:

Sal

es@

clto

olce

ntr

e.co

m.a


P

h:

07

- 3

32

6 1

55

5


Choose from a range of blades

WOOD

UNIVERSAL

METAL

SPECIALIST

Power through challenging tasks quickly with hassle-free blade changes and variable speed.

The unique position guide and depth stop set improves the accuracy of cut outs and plunge cuts in plasterboard, wood, composite materials and laminate. Position Aid Plunge Adapter Set |500251 $210

Fastfix blade change system makes switching between cutting different materials easy.

Triple blade guidance system with parallel adjustable carbide jaws prevents the blade from running off course to deliver accurate cuts.

The effective splinterguard ensures smooth, splinter-free cuts and prevents time consuming finishing work.

SAVE 10%on selected jigsaw blades

MSB 50/35 | 500126 $33.30

SSB 32500137 $104.40

SSP 56,5/1500138 $28.80

Available on: 486563, 486963, 486548, 486546, 486549, 499476, 486547, 499477, 499478

HSB 50/35 500128 $32.40

HSB 50/45500132 $33.30

HSB 50/55500134 $34.20

HSB 50/65500135 $30.60

HSB 100/HSC | 500136 $81.90

USB 50/35500130 $27.90

USB 50/65500131 $35.10

USB 78/32500129 $27

USB 78/42500133 $27.90

10% OFFselected Vecturo blades

MULTI-TOOL FLEXIBILITY PRECISION AROUND EVERY CURVE

Multi-Tool Vecturo OS 400 | 563010• Universal saw blade USB 78/32/BI• SYS 2 T-LOC systainer

$875 Vecturo Multi Tool Set | F28404 $1,125

Saw Blades (4 x wood, 1 x metal 4 x univer

sal)

FC10

58

BONUS

PAIR A JIGSAW WITH A DUST EXTRACTOR & SAVE $100*

SYSTEM

Pendulum Jigsaw PSB 300 D Handle | 561454 or PS 300 Barrel Grip | 561444• Power consumption 720W• Cutting depth in wood: 120mm• Stroke rate: 1,000 - 2,900 • SYS 1 T-LOC systainer

$550 each

Limited Edition Jigsaw Blade Set 4

9950

1

BONUSValued at

$114

See it in action www.festool.com.au

Valued at

$313

*Refer to page 3 for T&C’s

Emai

l: S

ales

@cl

tool

cen

tre.

com

.au


P

h:

07

- 3

32

6 1

55

5


Choose from a range of blades

WOOD

UNIVERSAL

METAL

SPECIALIST

Power through challenging tasks quickly with hassle-free blade changes and variable speed.

The unique position guide and depth stop set improves the accuracy of cut outs and plunge cuts in plasterboard, wood, composite materials and laminate. Position Aid Plunge Adapter Set |500251 $210

Fastfix blade change system makes switching between cutting different materials easy.

Triple blade guidance system with parallel adjustable carbide jaws prevents the blade from running off course to deliver accurate cuts.

The effective splinterguard ensures smooth, splinter-free cuts and prevents time consuming finishing work.

SAVE 10%on selected jigsaw blades

MSB 50/35 | 500126 $33.30

SSB 32500137 $104.40

SSP 56,5/1500138 $28.80

Available on: 486563, 486963, 486548, 486546, 486549, 499476, 486547, 499477, 499478

HSB 50/35 500128 $32.40

HSB 50/45500132 $33.30

HSB 50/55500134 $34.20

HSB 50/65500135 $30.60

HSB 100/HSC | 500136 $81.90

USB 50/35500130 $27.90

USB 50/65500131 $35.10

USB 78/32500129 $27

USB 78/42500133 $27.90

10% OFFselected Vecturo blades

MULTI-TOOL FLEXIBILITY PRECISION AROUND EVERY CURVE

Multi-Tool Vecturo OS 400 | 563010• Universal saw blade USB 78/32/BI• SYS 2 T-LOC systainer

$875 Vecturo Multi Tool Set | F28404 $1,125

Saw Blades (4 x wood, 1 x metal 4 x univer

sal)

FC10

58

BONUS

PAIR A JIGSAW WITH A DUST EXTRACTOR & SAVE $100*

SYSTEM

Pendulum Jigsaw PSB 300 D Handle | 561454 or PS 300 Barrel Grip | 561444• Power consumption 720W• Cutting depth in wood: 120mm• Stroke rate: 1,000 - 2,900 • SYS 1 T-LOC systainer

$550 each

Limited Edition Jigsaw Blade Set 4

9950

1

BONUSValued at

$114


Valued at

$313

*Refer to page 3 for T&C’s

Em

ail:

Sal

es@

clto

olce

ntr

e.co

m.a


P

h:

07

- 3

32

6 1

55

5


Drill Driver Basic T Series T18 | 564605 or C Series C18 | 564609• Centrotec tool chuck• Centrotec bit holder• Fastfix keyless chuck • SYS 2 T-LOC systainer

$399 each

The FastFix interface system means the T and C 18 can do the job of numerous drills - with the quick switch of a chuck attachment.

Eliminate dust at the source using a drilling dust nozzle. No cleaning required after job is complete.

Drill or drive between studs, joists, cabinet or drawer spaces, or virtually any constrained space with the angle attachment.

Overhead work is made easy with impressive vibration reducing technology in a lightweight 2.4kg design

18V Rotary Hammer BHC 18V Basic | 564606• Depth stop• Additional side handle • SYS 2 T-LOC systainer

$509

Drilling Accessories

FastFix Right Angle Chuck | 490293 $113

Ratchet 1/4”Set | 497881 $189

FastFix Countersink Depth Stop Chuck | 493539 $118

Centrotec 3-8mm Wood Drill Bit Set | 493648 SPECIAL $69

FastFix Eccentric Offset Chuck | 490294 $113

TCL 3 Charger | 499383 $65

Centrotec 3-8mm Mini Wood Spiral Drill Bit Set | 495130 SPECIAL $69

18V 5.2Ah Li-Ion Battery | 500435 $120

POWERFUL & VERSATILE DRILLING COMPACT & POWERFUL ROTARY HAMMER

Syslite Uni Torch 769079

BONUSValued at

$99

SDS Drill Bit Set 499924

BONUSValued at

$113

The unique vibration dampening offers great working comfort for long periods of non-tiring work.


Check out the BCM review on the BHC 18 Cordless Rotary Hammerwww.festool.com.au

OVERALL STAR RATING

You can instantly feel the power of the brushless motor but it’s the control you have with these drills that’s amazing

WWW.TRADEMAGS.COM.AU/BCM 43

ARTICLE CRITERIA BUILDING HAND TOOLS Operator Comments Report

STAR RATING (Out of five)

BALANCE Very well-balanced tool ★ ★ ★ ★ ★

DESIGN Great design, great features and great accessories ★ ★ ★ ★ ★

ERGONOMICS Feels great in your hand – for long periods too! ★ ★ ★ ★

SPEED Very fast, controlled drilling ★ ★ ★ ★ ★

BATTERY RUN TIME Batteries last a long time. 4.2 amp/h with brushless motor ★ ★ ★ ★

RECHARGE TIME Fast battery recharge ★ ★ ★ ★

TORQUE 10/25NM ★ ★ ★ ★

VIBRATION Vibration is soaked up very nicely with suspension ★ ★ ★ ★ ★

EASE OF OPERATION Very easy to use, changeover bits, and pack away in box ★ ★ ★ ★

PRICE RRP $469.00 and it comes in a Systainer with depth stop and additional side handle

ACCESSORIES

Rubber frame, side handle, depth stop all fit very well into an organised case with a photo of how it all packs away nicely into the Systainer. There is also space in the Systainer for optional extras: charger, batteries, SDS adapter and drilling dust nozzle

OVERALL LIKES All of the above!

OVERALL DISLIKES This drill is a little more expensive... I guess you get what you pay for! Definitely worth it.

OVERALL STAR RATINGThe Germans nailed this one on the head!

Drilling Dust Nozzle| 500483 $43

36 month warranty on drills, batteries

& chargers

Emai

l: S

ales

@cl

tool

cen

tre.

com

.au


P

h:

07

- 3

32

6 1

55

5


Drill Driver Basic T Series T18 | 564605 or C Series C18 | 564609• Centrotec tool chuck• Centrotec bit holder• Fastfix keyless chuck • SYS 2 T-LOC systainer

$399 each

The FastFix interface system means the T and C 18 can do the job of numerous drills - with the quick switch of a chuck attachment.

Eliminate dust at the source using a drilling dust nozzle. No cleaning required after job is complete.

Drill or drive between studs, joists, cabinet or drawer spaces, or virtually any constrained space with the angle attachment.

Overhead work is made easy with impressive vibration reducing technology in a lightweight 2.4kg design

18V Rotary Hammer BHC 18V Basic | 564606• Depth stop• Additional side handle • SYS 2 T-LOC systainer

$509

Drilling Accessories

FastFix Right Angle Chuck | 490293 $113

Ratchet 1/4”Set | 497881 $189

FastFix Countersink Depth Stop Chuck | 493539 $118

Centrotec 3-8mm Wood Drill Bit Set | 493648 SPECIAL $69

FastFix Eccentric Offset Chuck | 490294 $113

TCL 3 Charger | 499383 $65

Centrotec 3-8mm Mini Wood Spiral Drill Bit Set | 495130 SPECIAL $69

18V 5.2Ah Li-Ion Battery | 500435 $120

POWERFUL & VERSATILE DRILLING COMPACT & POWERFUL ROTARY HAMMER

Syslite Uni Torch 769079

BONUSValued at

$99

SDS Drill Bit Set 499924

BONUSValued at

$113

The unique vibration dampening offers great working comfort for long periods of non-tiring work.


Check out the BCM review on the BHC 18 Cordless Rotary Hammerwww.festool.com.au

OVERALL STAR RATING

You can instantly feel the power of the brushless motor but it’s the control you have with these drills that’s amazing

WWW.TRADEMAGS.COM.AU/BCM 43

ARTICLE CRITERIA BUILDING HAND TOOLS Operator Comments Report

STAR RATING (Out of five)

BALANCE Very well-balanced tool ★ ★ ★ ★ ★

DESIGN Great design, great features and great accessories ★ ★ ★ ★ ★

ERGONOMICS Feels great in your hand – for long periods too! ★ ★ ★ ★

SPEED Very fast, controlled drilling ★ ★ ★ ★ ★

BATTERY RUN TIME Batteries last a long time. 4.2 amp/h with brushless motor ★ ★ ★ ★

RECHARGE TIME Fast battery recharge ★ ★ ★ ★

TORQUE 10/25NM ★ ★ ★ ★

VIBRATION Vibration is soaked up very nicely with suspension ★ ★ ★ ★ ★

EASE OF OPERATION Very easy to use, changeover bits, and pack away in box ★ ★ ★ ★

PRICE RRP $469.00 and it comes in a Systainer with depth stop and additional side handle

ACCESSORIES

Rubber frame, side handle, depth stop all fit very well into an organised case with a photo of how it all packs away nicely into the Systainer. There is also space in the Systainer for optional extras: charger, batteries, SDS adapter and drilling dust nozzle

OVERALL LIKES All of the above!

OVERALL DISLIKES This drill is a little more expensive... I guess you get what you pay for! Definitely worth it.

OVERALL STAR RATINGThe Germans nailed this one on the head!

Drilling Dust Nozzle| 500483 $43

36 month warranty on drills, batteries

& chargers

Em

ail:

Sal

es@

clto

olce

ntr

e.co

m.a


P

h:

07

- 3

32

6 1

55

5


150mm Eccentric Sander ETS 150/3 | 571905 or ETS 150/5 | 571919• Soft StickFix sanding pad ø 150mm• StickFix abrasive• Sanding stroke: available in 3mm and 5mm• Weight 1.8km • Fixed lead in carton

SPECIAL $515

Ergonomic design and soft grip handle - makes thorough sanding of flat surfaces and profiles easy.

For longer lasting pads, abrasives and dust free results connect to a Festool dust extractor.

Smooth operation is assured with soft start up, constant speed and overload protection.

Customise your own pad to suit the profiles you need to sand, from hand rails to tight angles.

Power through detail sanding, tight corners, window frames and overhead surfaces.

$44SAVE

$90SAVE

Linear Sander Duplex LS 130 | 567770• Sanding stoke: 4mm• StickFix sanding profile pad• 90° sanding pad • SYS 1 T-LOC systainer

SPECIAL $695

Orbital Sander DTS 400 | 567870• Sanding stoke 2mm• StickFix sanding pad • SYS 1 T-LOC systainer

$599

Create your own sanding pad to match custom profiles. Shape your own profile with this blank pad to the desired profile.

Special $75

$15SAVE

80mm x 133mm Custom Profile Back Up Pad 490780

SYS-STF Delta 100x150 Systainer /

4976

86

BONUSValued at

$99

SUPERIOR SURFACE FINISH SANDING THE FINER DETAILS

SYSTEMPAIR A ETS SANDER WITH A

DUST EXTRACTOR & SAVE $100*SYSTEM

PAIR A DETAIL SANDER WITH A DUST EXTRACTOR & SAVE $100*

Abrasive storage solution

*Only available with the DTS 400 sander

* Refer to page 3 for T&C’s *Refer to page 3 for T&C’s

Emai

l: S

ales

@cl

tool

cen

tre.

com

.au


P

h:

07

- 3

32

6 1

55

5


150mm Eccentric Sander ETS 150/3 | 571905 or ETS 150/5 | 571919• Soft StickFix sanding pad ø 150mm• StickFix abrasive• Sanding stroke: available in 3mm and 5mm• Weight 1.8km • Fixed lead in carton

SPECIAL $515

Ergonomic design and soft grip handle - makes thorough sanding of flat surfaces and profiles easy.

For longer lasting pads, abrasives and dust free results connect to a Festool dust extractor.

Smooth operation is assured with soft start up, constant speed and overload protection.

Customise your own pad to suit the profiles you need to sand, from hand rails to tight angles.

Power through detail sanding, tight corners, window frames and overhead surfaces.

$44SAVE

$90SAVE

Linear Sander Duplex LS 130 | 567770• Sanding stoke: 4mm• StickFix sanding profile pad• 90° sanding pad • SYS 1 T-LOC systainer

SPECIAL $695

Orbital Sander DTS 400 | 567870• Sanding stoke 2mm• StickFix sanding pad • SYS 1 T-LOC systainer

$599

Create your own sanding pad to match custom profiles. Shape your own profile with this blank pad to the desired profile.

Special $75

$15SAVE

80mm x 133mm Custom Profile Back Up Pad 490780

SYS-STF Delta 100x150 Systainer /

4976

86

BONUSValued at

$99

SUPERIOR SURFACE FINISH SANDING THE FINER DETAILS

SYSTEMPAIR A ETS SANDER WITH A

DUST EXTRACTOR & SAVE $100*SYSTEM

PAIR A DETAIL SANDER WITH A DUST EXTRACTOR & SAVE $100*

Abrasive storage solution

*Only available with the DTS 400 sander

* Refer to page 3 for T&C’s *Refer to page 3 for T&C’s

Em

ail:

Sal

es@

clto

olce

ntr

e.co

m.a


P

h:

07

- 3

32

6 1

55

5


Quickly and thoroughly overcome any material removal task, eliminating the need for hard manual work with other tools.

With efficient dust extraction, leave the work area clean and tidy, protect your health and extend the useful life of the machine and the diamond discs.

Smooth start up guarantees a gentle increase in speed, and continuous temperature monitoring for protection.

The folding segment allows you to work close to the edges and walls.

15% OFF

SERVICE ALL INCLUSIVE

Grinding Discs *Discount prices shown below

DIA HARD

DIA ABRASIVE

DIA STONE

DIA THERMO

DIA UNI

Resurfacing and removal of old weathered concrete, removing expoy resins, roughening smooth surfaces.80mm Disc inc tool holder | 767983 $246.50130mm Disc Premium Disc | 768017 $187130mm Standard Disc | 499972 $140.25

For very sandy materials, screed, green concrete, adhesive on screed, lime sand brick and foam mortar. 80mm Disc inc tool holder | 767984 $246.50130mm Disc | 768018 $187 130mm Standard Disc | 499973 $140.25

For very hard materials and hard concrete. 130mm Disc | 769166 $187

For removing thermo-elastic and soft materials eg elastic adhesive for PVC, wooden or parquetry flooring. 80mm Disc inc tool holder | 769082 $322.15130mm Disc | 768023 $250.75

Resurfacing and removing paints and coatings from concrete surfaces and plaster. 80mm Disc inc tool holder | 769169 $246.50130mm Disc | 769167 $187

Rapid Repair Service

CONCRETE GRINDING SOLUTIONS

SYSTEM PAIR A DIAMOND GRINDER WITH A DUST EXTRACTOR & SAVE $100*

80mm Diamond Grinder RG 80 | 768973• Rated input: 1100W• No-load speed: 2,000-5,900 rpm• Grinding disc: 80mm• Weight 3.2kg • SYS 3 T-LOC systainer (toolhead not included)

$1,105

130mm Diamond Grinder RG 130 | 768976• Rated input: 1,600W• No-load spreed: 3,000 - 7,700 rpm• Grinding disc: 130mm• Weight 3.8kg • SYS 5 T-LOC systainer (tool disc not included)

$1,125

36L Heavy Duty Concrete Specialist Autoclean Dust Extractor CTL 36 HD | 584169• Power consumption: 350 - 1200W• Airflow max: 3,900 l/m• Max vacuum: 24,000 Pa• Container capacity: 36 litres

$1,500When your register your tool within 30 days after purchase at

www.festool.com.au/sai


Emai

l: S

ales

@cl

tool

cen

tre.

com

.au


P

h:

07

- 3

32

6 1

55

5


Quickly and thoroughly overcome any material removal task, eliminating the need for hard manual work with other tools.

With efficient dust extraction, leave the work area clean and tidy, protect your health and extend the useful life of the machine and the diamond discs.

Smooth start up guarantees a gentle increase in speed, and continuous temperature monitoring for protection.

The folding segment allows you to work close to the edges and walls.

15% OFF

SERVICE ALL INCLUSIVE

Grinding Discs *Discount prices shown below

DIA HARD

DIA ABRASIVE

DIA STONE

DIA THERMO

DIA UNI

Resurfacing and removal of old weathered concrete, removing expoy resins, roughening smooth surfaces.80mm Disc inc tool holder | 767983 $246.50130mm Disc Premium Disc | 768017 $187130mm Standard Disc | 499972 $140.25

For very sandy materials, screed, green concrete, adhesive on screed, lime sand brick and foam mortar. 80mm Disc inc tool holder | 767984 $246.50130mm Disc | 768018 $187 130mm Standard Disc | 499973 $140.25

For very hard materials and hard concrete. 130mm Disc | 769166 $187

For removing thermo-elastic and soft materials eg elastic adhesive for PVC, wooden or parquetry flooring. 80mm Disc inc tool holder | 769082 $322.15130mm Disc | 768023 $250.75

Resurfacing and removing paints and coatings from concrete surfaces and plaster. 80mm Disc inc tool holder | 769169 $246.50130mm Disc | 769167 $187

Rapid Repair Service

CONCRETE GRINDING SOLUTIONS

SYSTEM PAIR A DIAMOND GRINDER WITH A DUST EXTRACTOR & SAVE $100*

80mm Diamond Grinder RG 80 | 768973• Rated input: 1100W• No-load speed: 2,000-5,900 rpm• Grinding disc: 80mm• Weight 3.2kg • SYS 3 T-LOC systainer (toolhead not included)

$1,105

130mm Diamond Grinder RG 130 | 768976• Rated input: 1,600W• No-load spreed: 3,000 - 7,700 rpm• Grinding disc: 130mm• Weight 3.8kg • SYS 5 T-LOC systainer (tool disc not included)

$1,125

36L Heavy Duty Concrete Specialist Autoclean Dust Extractor CTL 36 HD | 584169• Power consumption: 350 - 1200W• Airflow max: 3,900 l/m• Max vacuum: 24,000 Pa• Container capacity: 36 litres

$1,500When your register your tool within 30 days after purchase at

www.festool.com.au/sai


Em

ail:

Sal

es@

clto

olce

ntr

e.co

m.a


P

h:

07

- 3

32

6 1

55

5

festool.com.auwww.facebook.com/festoolaustralia

www.youtube.com.au

blog.festool.com.au

Only available from participating Festool dealers, subject to availability - call 1300 063 900 or visit www.festool.com.au to find your local participating dealer. All pricing referenced in this brochure is GST inclusive. Promotion bonus items are value adds available strictly while stock lasts. Promotion valid to 30/6/2016. No rights whatsoever can be claimed from the information and illustrations in this catalogue. We reserve the right to correct any errors or omissions. Images are for illustrative purposes only.

Festool AustraliaPO Box 4401Dandenong South VIC 3164Phone: 1300 063 900Email: [email protected]


GET YOUR STORAGE SORTED

Systainer Storage Box SYS-SB | 499901• 396 x 296 x 167mm

SPECIAL $128

Systainer SYS 1 T-Loc Storage Box With Lid SYS 1TL-DF | 497851• 396 x 296 x 105mm

SPECIAL $84

Store all your nails, dowels, screws, blades, drill bits and more, keeping everything you need close to hand and easy to transport.

Save time and reduce the effort required when moving tools with these flexible, customised storage solutions.

$32SAVE

$21SAVE

Sortainers Storage Box4 drawer | 4915226 drawer | 4919849 drawer | 49198512 drawer | 491986

$235 each

Systainer SYS 1 T-LOC With MFT Timber Lid | 500076

$119Systainer Tool BoxesSYS-TB -2 | 499550

$92

SYS Roll Mobile Cart For Systainers | 498660

$235

Trolley for SYS 1-5 T-Loc Systainer | 495020

$125

Pull Out Shelf SYS-AZ SetEasy pull out drawers suitable for setting up your own systainer arrangement. Simply install a 32mm hole pattern.

$73 Single Shelf | 500692

$345 5 Pack | 500767

Emai

l: S

ales

@cl

tool

cen

tre.

com

.au


P

h:

07

- 3

32

6 1

55

5

festool.com.auwww.facebook.com/festoolaustralia

www.youtube.com.au

blog.festool.com.au

Only available from participating Festool dealers, subject to availability - call 1300 063 900 or visit www.festool.com.au to find your local participating dealer. All pricing referenced in this brochure is GST inclusive. Promotion bonus items are value adds available strictly while stock lasts. Promotion valid to 30/6/2016. No rights whatsoever can be claimed from the information and illustrations in this catalogue. We reserve the right to correct any errors or omissions. Images are for illustrative purposes only.

Festool AustraliaPO Box 4401Dandenong South VIC 3164Phone: 1300 063 900Email: [email protected]


GET YOUR STORAGE SORTED

Systainer Storage Box SYS-SB | 499901• 396 x 296 x 167mm

SPECIAL $128

Systainer SYS 1 T-Loc Storage Box With Lid SYS 1TL-DF | 497851• 396 x 296 x 105mm

SPECIAL $84

Store all your nails, dowels, screws, blades, drill bits and more, keeping everything you need close to hand and easy to transport.

Save time and reduce the effort required when moving tools with these flexible, customised storage solutions.

$32SAVE

$21SAVE

Sortainers Storage Box4 drawer | 4915226 drawer | 4919849 drawer | 49198512 drawer | 491986

$235 each

Systainer SYS 1 T-LOC With MFT Timber Lid | 500076

$119Systainer Tool BoxesSYS-TB -2 | 499550

$92

SYS Roll Mobile Cart For Systainers | 498660

$235

Trolley for SYS 1-5 T-Loc Systainer | 495020

$125

Pull Out Shelf SYS-AZ SetEasy pull out drawers suitable for setting up your own systainer arrangement. Simply install a 32mm hole pattern.

$73 Single Shelf | 500692

$345 5 Pack | 500767

Date post:	29-Jul-2016
Category:	Documents
Upload:	cl-tool-centre-pty-ltd
View:	225 times
Download:	9 times

Festool May June Campaign - C&L

Documents