FFS-60Compact and intelligent

FFS-60

Meaning of FFS-60*

F - formF - fillS - seal60 - maximum speed with ABL* - modification

FFS

The benefits from this project

FFS

Cuts unnecessary movements and operations

Tube body is formed and filled only in one position – vertical

  Tube body is oriented only once  Tube body is formed on a mandrel and it is

supported by the mandrel until the filling process starts. Thus, very thin tubes can be made and filled without smashing and OVALITY is no longer a problem for the filling machines

  Elimination of carton boxes, storage space and

transportation of the empty tubes. Thus, less wastage, less risk of contamination, less expenses.

 

The benefits

FFS-60

The beginning

KOMBIS FCM 0100Tube making, tube filling + cartooning

FFS-60

The innovation

KOMBIS FFS 3301

The unique machine

FFS-60

Main targets

1. Simple designAll machine processes are stepped therefore stopping the FFS-60 is possible without any tube wastage.

2. Easy tool changeoverDifferent size parts are in units ready for installing. No fine setting on machine. Only one technician is enough for 10 machines.

3. Easy exchange of filling product.All mechanisms in direct contact with filling product can be easily removed from the FFS-60. Cleaning is outside of the FFS-60.Second filling head is optional.Exchanging filling head for products with different viscosity.

FFS-60

Vertical mandrel design

Easy access to important machine components and parts. Quick service

Everything is in front of the operator. Good visibility.

Reduced change over time and maintenance of the quality of settings.

Machine scheme

FFS-60

FFS-60

The Processes (modular principle)

FFS-60

Machine Options/Levels Level 1

◦Frame made from steel and Al profile

Good solution for:

technical products hair dye shampoocreams

Level 1FFS-60

FFS-60

Level 2

◦Frame made from steel and stainless steel

Good solution for: Cosmetic products Tooth pasteFood products Medical products without special environment request

FFS-60 Level 2

FFS-60

FFS-60

Level 3

Complete machine is made from stainless steel

Plastic roof is included (for hygienic filling)

Special system for foil disinfection before body forming

System for high precision filling with mass measure.

FFS-60

Filling components are made from steel in all machine levels

316L (1.4404, S31603, X2CrNiMo17-12-2)304 (1.4307, S30403, X2CrNi18-9)

FFS-60

Technical parameters

ABL tubesFoil thickness:175 … 330 µmTube diameter:Ø16 … Ø50mmDifferent caps

Special shoulders

PBL tubesFoil thickness:300 … 400 µmTube diameter:Ø22 … Ø50mmDifferent caps

Special shoulders

Tube length: 90 – 200 mmMachine dimensions:

3 812 x 3 535 x 2 830 mm