20
FIBER ENGRAVING LASER TYPE HXP 50
The possibility of covering
Fiber laser series HXP contains fiber laser generator IPG (USA) and high-speed high-precision galvo-
scanner, making it excels stable output and high quality working modes of the laser. This system is to
be used in mass production where it is needed high marking speed, good marking effect and high
efficiency. System is also easy to operate, has low operating costs, long life and minimal
maintenance. The system has the CE mark, is produced by CE standards and complies with all
regulations for working with lasers in safety class IV.
Option to buy:
Rotary axis device
Being capable of marking/ engraving metals such as gold,
silver brass, iron, tin, aluminum, stainless steel, etc. and
some plastic materials.
Technical specification
Laser power 50W
Type of generator IPG(USA)
Wave lenght 1065 ± 10nm
Beam quality ㎡ <2
Laser repetition frequency 50 kHz --- 100KHz
Marking area 110x110mm
Height adjustable 0-400mm
Marking speed ≤ 7000 mm / s
Marking depth ≤ 2 mm
Min. linewidth 0,02 mm
Min. letter 0,15 mm
Repetition precision ± 0,002 mm
Imput power ≤ 1000 W
Power 220V ± 10% / 50Hz/60Hz
Laser module life > 50 000h
Cooling Air cooling
Support software Coreldraw, Autocad, atd.
Net weight 100KG
Dimesion 700x600x1270mm
Disk rotating device
Disk rotateble device is widely applied to electronic components, IC, watches & clocks, tools, automobile parts, electronic apparatus, glasses, fittings, hardware, plastic buttons, medical instruments and telecom products, etc
Manual moving table
Can do continous working with optional feeding table,or added on production-line.
We supply the system HXP50 in the following basic configuration:
Laser generator: 50W (IPG - USA)
F-Theta lens: for working area 110x110mm (supplied standardly
Working table: feed rate X/Y
PC: Lenovo s Windows 7 Professional (Eng. verze)
The control panel: LMC2010, support setting the pulse width
Software: YMMarker in english language + other function settings
Foot pedal
Options:
Rotary axis device including connection to the user software
Disk rotating device
Manual moving table
Coverering of computers and laser generator.
F-Theta lens NS FIB 300 for marking/engraving working are 300 x 300mm
F-Theta lens NS FIB 175 for marking/engraving working are 175 x 175mm
Protective glasses L 31-2270 EP-5 for the operater of the laser system, including clearance
Microscope HK28, zoom 10x, with settings. magnetic stand and lighting
Microscope HK30, zoom 10x, with settings. magnetic stand and lighting
Example of use:
Engraving of stamping die Engraving of stamping die - brass
Engraving of graphite Engraving of stamping die steel
FIBER ENGRAVING LASER TYPE HXP 30
Fiber laser series HXP contains fiber laser generator QUANTEL (France) and high-speed high-precision
galvo-scanner RAYLASE (Germany), making it excels stable output and high quality working modes of
the laser. This system is to be used in mass production where it is needed high marking speed, good
marking effect and high efficiency. System is also easy to operate, has low operating costs, long life
and minimal maintenance. The system has the CE mark, is produced by CE standards and complies
with all regulations for working with lasers in safety class IV.
Laser system equipment
The laser is supplied including:
Resource unit with:
Control unit
PC including installed software working with Windows, display, key board and mouse
Main switch
Frame with laser source Quantel and precise and hi-speed galvano scanner Raylase
Working table
Possibilities for movement the laser head
Properties:
Design: the system consists of three parts: resource unit, frame with laser head and
demountable working table. It has manual focusing and user-friendly operation.
Importated isolator for laser generator protection improves proces stability and laser
module life.
Laser beam quality is much better than the traditional laser marking machine. Fiber laser
beam mode is TEM00; focus diameter is less than 20um; expanding angle is only 1/4 of the
YAG-DP. Therefore it is especially good at delicate marking.
High efficiency of conversion of electrical energy to light energy. Gross electricity
consumption is less than 500W, which is 1/10 of the YAG’s consumption.
Free from maintenance, long working life, small size, suitable for any working environment.
Fast marking speed, 2-3 times faster than the traditional marking machine.
User-friendly software allows to create exact marking figures, structuring and setting of
laser parameters for each structure. The marking software supports files such as
Coreldraw, AutoCAD, Photoshop and PLT,PCX,DXF,BMP; SHX or TTF can be directly
adopted.
The functions such as autocoding for sequence No., batch number, date, barcode and so
on.
Applicable materials and industrial applications:
• The system is suitable for all types of metals, industrial plastics, coated materials, rubber,
ceramics, etc.
• Wide range of uses : marking mobiles buttons, marking transparent plastic buttons, various
electronic components, integrated circuits, communications products, tools, accessories for tolls,
glasses, watches, stainless steel products etc.
Technical specification
Laser power 20W
Wave lenght 1065 ± 10nm
Beam quality ㎡ <2
Repetition precision 20 kHz --- 100KHz
Marking area 110x110mm
Marking speed ≤ 7000 mm / s
Marking depth ≤ 1 mm
Min. linewidth 0,02 mm
Min. letter 0,15 mm
Repetition precision ± 0,002 mm
Imput power ≤ 650 W
Power supply 220V ± 10% / 50Hz/4A
Laser module life > 50000h
Cooling Air cooling
Composition system control system, PC, working table
Working environment: Clean and dust-free environment
Working temperature 10 ° C up to 35 ° C
Working Humidity 5% up to 75%
Net weight 127KG
Dimesion 700x900x1380 mm
Laser system configuration:
This machine is made of the most modern parts and its contruction allows to control laser beam accurately.
The most important parts:
Fiber laser generator QUANTEL High-speed and precise scanner RAYLASE,
Special USB interface for laser generator Biaxial converter for scanner
We supply the system HXP30 in the following basic configuration:
Resource unit, frame with laser head and demountable working table
20W fiber generator QUANTEL, air cooling
High-speed scanner RAYLASE with repetition precision 0,002mm
PC including 17´´ coulour LCD display
Software for marking/engraving working with Windows
F-Theta lens with working area 110 x 110 mm (supplied standardly)
Positioning system using read focusing beam
Working table working in two axis, altitude setting
CE Conformity Declaration
Electrical equipment revisions
Options:
F-Theta lens NS FIB 300 for marking/engraving working are 300 x 300mm
F-Theta lens NS FIB 175 for marking/engraving working are 175 x 175mm
Protective glasses L 31-2270 EP-5 for the operater of the laser system, including clearance
Microscope HK28, zoom 10x, with settings. magnetic stand and lighting
Microscope HK30, zoom 10x, with settings. magnetic stand and lighting
Purging air unit HC15 for cleaning F-Theta lens
Exhaustion unit PAC01 with a carbon filter, mag.stand, suction hose
Example of use:
Engraving of mould Engraving of parts
Engraving of mould Marking of polished surfaces
Engraving of pressing mould
FIBER ENGRAVING LASER TYPE HXP 20-E
The possibility of covering
High seed galvanometer scanner
All-digital drive and scanning motor, low zero drift for long working, long-term stability with fine
marking effect.
SmartScanner software systém
Self-owned intellectualproperty, simple operation, compatible with multiple languages,
customized development, permanent upgrade for free. Bulit-in safety emergency stop button
ensures the safety of production. High-quality electrical components improve the systém stability
for long-term working.
Marking posibility
Metal, aluminium, plastic, jewellery, precision bearing marking, glasses, keaboard, measuring
tools, electronic components, differenty types of wire and cable, medical equipment, medicine
package, etc..
Working platforrm: Mounting holes evenly, adapted to different positioning of the
workpiece. Different tables are avalible for different
demends..
Fiber laser generator: Sort boot time, narrow light pulses, high peak power, wide
repetition rate range etc..
Cooling design: Efficient cooling equipment designed to enhance stability.
Technical specification
Laser power 20W
Wave lenght 1.06µm
Beam quality <1,2m2
Laser repetition frequency 20 kHz --- 80KHz
Marking area 110x110mm; 175x175mm
Working distance 184mm/288mm
Marking speed ≤ 7000 mm / s
Marking depth ≤ 1 mm
Min. linewidth 0,02 mm
Min. letter 0,2 mm
Frequency 50/60Hz
Power supply 220V ± 10% / 50Hz/4A
Imput power 1KW
Cooling Air cooling
Working temperature 10 ° C až 35 ° C
Working Humidity 75%
Working environment: Clean and dust-free environment
Net weight 80KG
Support software BMP, PLT, Al, DXF etc.
Dimesions 750x600x1270mm
We supply the system HXP20-E in the following basic configuration:
Laser generator: 20W
F-Theta lens: for working area 110x110mm (supplied standardly
Working table: feed rate X/Y
PC: Lenovo s Windows 7 Professional (Eng. verze)
The control panel: LMC2010, support setting the pulse width
Software: YMMarker in english language + other function settings
Foot pedal
Options:
Rotary axis device including connection to the user software
Coverering of computers and laser generator.
F-Theta lens NS FIB 300 for marking/engraving working are 300 x 300mm
F-Theta lens NS FIB 175 for marking/engraving working are 175 x 175mm
Protective glasses L 31-2270 EP-5 for the operater of the laser system, including clearance
Microscope HK28, zoom 10x, with settings. magnetic stand and lighting
Microscope HK30, zoom 10x, with settings. magnetic stand and lighting
Example of use:
FIBER ENGRAVING LASER HXP 20E-MINI
Packaged in an elegant box easy way to transport
This unique portable compact fiber laser has been developed for engraving metal and plastic
materials. Suitable for mass production, simple describing or labeling for promotional items. Is
supplied either with marking ares 70x70mm or 110x110mm. Also included an elegant box where is
plased laser engraving machine for easy transport. Possibility of buying a rotary axis device with
connection to the user software . The possibility of describing the iron, steel, silver, jewelry, black
or colored plastic materials with a dark coating.
We supply the system HXP20-E in the following basic configuration:
Laser generator: 20W
F-Theta lens: for working area 110x110mm (supplied standardly
Working table: feed rate X/Y
PC: Notebook Lenovo s Windows 7 Professional (Eng. verze)
The control panel: LMC2010, support setting the pulse width
Software: YMMarker in english language + other function settings
Foot pedal
Technical specification
Laser power 20W
Laser repetition frequency 20 kHz --- 100KHz
Marking area 70x70mm/110x110mm
Marking speed ≤ 7000 mm / s
Marking depth ≤ 0,5 mm
Min. linewidth 0,02 mm
Min. letter 0,15 mm
Power supply AC 220V ± 5% / 50-60Hz
Laser module life 50000h
Imput power 500W
Cooling Vnitřní chlazení vzduchem
Working temperature 10 ° C až 35 ° C
Working Humidity 5%-95%
Working environment: Clean and dust-free environment
Net weight 55KG
Grafické formáty AI, BMP, GIF, JPGE, PCX, TGA, TIF, PLT, CDR, DMG, DXF, DST
Support software Auto Cad, Corel Draw, Photoshop
Dimesions 745x210x530mm
Composition system control system, PC, software
Options:
Rotary axis device including connection to the user software
Coverering of computers and laser generator.
F-Theta lens NS FIB 300 for marking/engraving working are 300 x 300mm
F-Theta lens NS FIB 175 for marking/engraving working are 175 x 175mm
Protective glasses L 31-2270 EP-5 for the operater of the laser system, including clearance
Microscope HK28, zoom 10x, with settings. magnetic stand and lighting
Microscope HK30, zoom 10x, with settings. magnetic stand and lighting
Example of use:
Knifes marking
Plastic marking Aluminium labels marking
V3 (8.1.2016) MEPAC ALWAYS SOMETHING NEW
We have a wide range of products for
Precision Engineering such as (diamond,
grinding etc.) tools, devices and laser
systems. All products available on
www.mepac-eshop.cz. Our sales
representatives offer consultancy services as
well as the products and they are able to
arrive as fast as necessary . We represent 17
foreign companies in the Czech Republic,
Poland and Slovakia.
Youl can find and buy all our products on: www.mepac-eshop.cz
We believe that your company will find in our extensive range of useful devices or tools for your
job.
Group of companies MEPAC CZ, Ltd. and MEPAC SK, Ltd.
MEPAC CZ, s.r.o. tel. /mob. /fax e-mail
Central office TŘINEC
Nebory 547
739 61 Třinec
www.mepac.cz
tel.: 558 348 112
mob.: 603 515 357 (shop)
mob.: 776 086 591 (shop)
mob.: 773 784 101 (workshop)
Branch office – VSETÍN
Průmyslový areál
Jasenice objekt 6
755 01 Vsetín
tel.: 571 417 771
mob.: 739 075 567 (production)
mob.: 739 366 619 (production)
mob.: 739 453 809 (shop)
mob.: 608 710 904 (shop)
Branch office – VRBNO
Zlatohorská 648
739 26 Vrbno p. Pradědem
tel.: 554 725 305
mob.: 603 507 946 (shop)
mob.: 739 204 755 (shop)
mob.: 775 569 917 (workshop)
fax: 554 725 035
Branch office – POLSKO
Czechowice - Dziedzice
tel.: 0048 910 085 519
mob.: 0048 513 041 157 [email protected]
MEPAC SK, s.r.o.
Kotešová 817
013 61 Kotešová (okres Bytča)
www.mepac.sk
tel.: 00421 910 082 933
mob.: 00421 917 120 075
mob.: 00421 905 910 944
