T H E S I E M O N . C O M P A N Y1•0
Wor
k Ar
eaSh
ield
edPr
oduc
tsM
odul
arPa
tchi
ng
Rack
s an
dCa
ble
Man
agem
ent
Patc
h Co
rds,
Plug
s an
dCa
ble
S210
Prod
ucts
S110
Prod
ucts
S66
Prod
ucts
Prot
ection
Tool
san
dTe
ster
s
Stan
dard
sOve
rvie
wAp
plic
atio
nGui
deIn
stal
lation
Prac
tice
sGlo
ssar
yIn
dex
Fibe
rPr
oduc
ts
RACK MOUNTINTERCONNECTCENTER (RIC)(pages 1.6 – 1.7)
WALL MOUNTINTERCONNECTCENTER (SWIC3)
(pages 1.8 – 1.9)
FIBER CONNECT PANEL
(FCP3)(page 1.10)
FIBER MANAGEMENT TRAY (FMT)
(page 1.11)
FIBER PRODUCTS
Product High density, High density, High density, low profile, High density, use with Applications low-to-high fiber count, low-to-medium fiber count, economical enclosure CT® or MAX™ patch panels
feature-rich rack mounting wall mount ideal for low fiber count, to accommodate fiber or solution rack mount applications mixed media applications
Mounting Space 2-4 RMS Wall 1 RMS 1-3 RMS
Capacity 6-144 fibers 4-48 fibers 6-36 fibers 2-96 fibers(ST, SC, FC, LC)
Capacity 12-288 fibers 12-96 fibers 12-72 fibers 2-96 fibers(MT-RJ)
Adapters Quick-Pack™ Quick-Pack™ Quick-Pack™ CT® Couplers or Adapter Plates Adapter Plates Adapter Plates MAX™ Modules
Adapter Types ST, SC, FC, MT-RJ, LC, ST, SC, FC, MT-RJ, LC, ST, SC, FC, MT-RJ, LC, ST, SC, FC, MT-RJ, LC,Hybrid ST/SC Hybrid ST/SC Hybrid ST/SC Hybrid ST/SC
Adapter Multimode Multimode Multimode MultimodePerformance & Singlemode & Singlemode & Singlemode & Singlemode
Colors Black, White Black, White Black Black
Note: 1 RMS = 44.5mm (1.75 in.)
01 00-19 12/14/00 12:08 PM Page a2
T H E S I E M O N . C O M P A N Y1•1
Wor
k Ar
eaSh
ield
edPr
oduc
tsM
odul
arPa
tchi
ng
Rack
s an
dCa
ble
Man
agem
ent
Patc
h Co
rds,
Plug
s an
dCa
ble
S210
Prod
ucts
S110
Prod
ucts
S66
Prod
ucts
Prot
ection
Tool
san
dTe
ster
s
Stan
dard
sOve
rvie
wAp
plic
atio
nGui
deIn
stal
lation
Prac
tice
sGlo
ssar
yIn
dex
Fibe
rPr
oduc
ts
The Siemon Engineering team
had three primary goals for
our MT-RJ solution — provide
the best possible product,
make it installer-friendly, and
ensure compatibility with as
many existing Siemon products
as possible.
Our connector design provides high performance and quick
installation time. Siemon MT-RJ connectors have factory
polished stubs — just prep the fiber, insert into the connector
and crimp to complete the termination. Our R&D lab spent
many hours validating the performance of the connector prior
to release to ensure it consistently yields superior insertion loss
numbers, typically 0.30 dB. The feedback from our customers
has been very positive on the connector’s reliability,
performance and ease of use.
We also realized from the start that the MT-RJ would be very
popular for fiber-to-the-desk applications. However, customer
feedback told us that people did not want to use bulky
faceplates or “fiber-only” work area mounting solutions. With
that in mind, we designed our MT-RJ adapters to be compatible
with nearly all of our work area products. Siemon MT-RJ
adapters fit right alongside our copper outlets in our existing
faceplates, surface mount boxes and more.
We’re still continuing to expand our MT-RJ product line as
well. We completed the release of our 50/125µm MT-RJ
products last year and this year we introduced new, higher
density adapter plates. Our 12-adapter plate (24-ports) doubles
the density of the solution we offered last year. Our team isn’t
done yet. Look for additional improvements and fiber products
from us in the future.
SECTION CONTENTSMT-RJ Products. . . . . . . . . . . . . . . . . . . . . . 1.2 – 1.3
MT-RJ Adapter Products . . . . . . . . . . . . . . . . . . . . 1.3
MT-RJ Jumpers . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3
MT-RJ Field-Installable Connectors . . . . . . . . . . . . . 1.3
LC Products. . . . . . . . . . . . . . . . . . . . . . . . 1.4 – 1.5
LC Adapter Products . . . . . . . . . . . . . . . . . . . . . . 1.5
LC Jumpers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5
LC Field-Installable Connectors . . . . . . . . . . . . . . . 1.5
Rack Mount Interconnect Center (RIC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.6 – 1.7
Fiber Storage Center (FSC) . . . . . . . . . . . . . . . . . . 1.7
Wall Mount Interconnect Center (SWIC3) . . . . . . . . . . . . . . . . . . . . . . . . . . 1.8 – 1.9
Mini Wall Mount Interconnect Center (MINI-SWIC3) . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.9
Fiber Connect Panel (FCP3). . . . . . . . . . . . . . . . . 1.10
Fiber Management Tray (FMT) . . . . . . . . . . . . . . . 1.11
Flat Quick-Pack™ Adapter Plates . . . . . . . . . . . . . 1.12
Splice Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.13
Compression Fittings . . . . . . . . . . . . . . . . . . . . . 1.13
Compression Fitting Conversion Kits . . . . . . . . . . . 1.13
Bend Radius Guide . . . . . . . . . . . . . . . . . . . . . . 1.13
Plug and Play Fiber Products . . . . . . . . . . 1.14 – 1.15
Plug and Play Modules . . . . . . . . . . . . . . . . . . . 1.15
Plug and Play Reel and Extender System . . . . . . . 1.15
ST and SC Fiber Cable Assemblies:Jumpers and Pigtails . . . . . . . . . . . . . . . . . . . . . 1.16
ST and SC Connectors . . . . . . . . . . . . . . . . . . . . 1.17
Lightspeed™ Termination Products . . . . . . . 1.18 – 1.19
Automated Fiber Polisher . . . . . . . . . . . . . . . . . . 1.18
Lightspeed™ ST and SC Fiber Termination Kits . . . . . 1.19
LC Fiber Termination Upgrade Kit . . . . . . . . . . . . 1.19
MT-RJ Fiber Termination Kit . . . . . . . . . . . . . . . . 1.19
SIEMON ENGINEERS ON MT-RJ PRODUCTS
01 00-19 12/14/00 12:08 PM Page a3
T H E S I E M O N . C O M P A N Y1•2
Wor
k Ar
eaSh
ield
edPr
oduc
tsM
odul
arPa
tchi
ng
Rack
s an
dCa
ble
Man
agem
ent
Patc
h Co
rds,
Plug
s an
dCa
ble
S210
Prod
ucts
S110
Prod
ucts
S66
Prod
ucts
Prot
ection
Tool
san
dTe
ster
s
Stan
dard
sOve
rvie
wAp
plic
atio
nGui
deIn
stal
lation
Prac
tice
sGlo
ssar
yIn
dex
Fibe
rPr
oduc
ts
MT-RJ PRODUCTS
SIEMON MT-RJ HIGHLIGHTSSiemon provides a complete line of MT-RJ Small Form Factor (SFF)
interconnect products — providing the utmost in versatility and performance.
Siemon MT-RJ MAX™ Modules, CT® Couplers and FOB bezels are compatible
with our faceplates, Fiber Outlet Boxes, and Surface Mount Boxes, enabling
a wide variety of work area options. MT-RJ Quick-Pack™ Adapter Plates can be
used in our popular rack and wall mount fiber enclosures. Connectors utilize
a proven no epoxy/no polish termination method, providing optimum
installation flexibility.
FAST TERMINATION Proven no epoxy/no polishtermination method greatly reduces installation time.
HINGED LATCH Ever reversed polarity on a duplexfiber termination? Siemon’s hingedlatch allows you to correct themistake. Simply defeat theintegrated latch, turn theconnector upside down, and insertinto adapter.
SIDE STACKABLE High-density MT-RJ MAX™
modules fit along side copper and multimedia outlets offeringhigh density and a cleanappearance for fiber to the deskapplications.
CONNECTORS AND JUMPERS
ARE AVAILABLE IN 62.5/125µM
AND 50/125µM OPTIONS
JUMPER COMBINATIONS AVAILABLE
IN MT-RJ TO MT-RJ, MT-RJ TO SC AND MT-RJ TO ST
USE THE SIEMON MT-RJ FIELD
TERMINATION KIT TO TERMINATE
CONNECTORS IN THE FIELD
TYPICAL INSERTION LOSS FOR MULTIMODE
CONNECTORS IS 0.3dB, WELL BELOW THE
0.75 dB MAXIMUM ALLOWED BY
TIA/EIA-568-A AND ISO/IEC 11801
HIGHER DENSITY – MT-RJ CONNECTORS
ARE ABOUT THE SIZE OF A STANDARD
“RJ” STYLE JACK AND ABOUT 1/3 THE
SIZE OF AN SC DUPLEX CONNECTOR
SIEMON MT-RJ ADAPTER
PRODUCTS ARE COMPATIBLE WITH
VIRTUALLY ALL SIEMON WORK AREA
MOUNTING SOLUTIONS
01 00-19 12/14/00 12:08 PM Page 2
T H E S I E M O N . C O M P A N Y1•3
Wor
k Ar
eaSh
ield
edPr
oduc
tsM
odul
arPa
tchi
ng
Rack
s an
dCa
ble
Man
agem
ent
Patc
h Co
rds,
Plug
s an
dCa
ble
S210
Prod
ucts
S110
Prod
ucts
S66
Prod
ucts
Prot
ection
Tool
san
dTe
ster
s
Stan
dard
sOve
rvie
wAp
plic
atio
nGui
deIn
stal
lation
Prac
tice
sGlo
ssar
yIn
dex
Fibe
rPr
oduc
ts
MT-RJ JUMPERS
Siemon MT-RJ jumpers are factory-terminated and 100% optically tested to assureoptimum performance. Jumpers comply with TIA/EIA-568-A and ISO/IEC 11801fiber performance specifications and are available in MT-RJ to MT-RJ and hybrid MT-RJ to SC and ST options.
PART# DESCRIPTION
FJ2R-MTMT(X)MM-(XX) . . . . . . MT-RJ to MT-RJ jumper, multimode (62.5/125 or 50/125µm)
FJ2R-MTSA(X)MM-(XX) . . . . . . MT-RJ to ST jumper, multimode (62.5/125 or 50/125µm)
FJ2R-MTSC(X)MM-(XX) . . . . . . MT-RJ to SC jumper, multimode (62.5/125 or 50/125µm)Use (X) to specify fiber type:6 = 62.5/125µm MM (gray jacket), 5 = 50/125 µm MM (orange jacket)Use (XX) to specify cable length: 01 = 1m (3.3 ft.), 03 = 3m (9.8 ft.), 05 = 5m (16.4 ft.)Notes: All jumpers are manufactured from OFNR riser grade cable that meets UL 1666Insertion loss = 0.30dB typical; return loss = 20dB minimumCustom lengths available upon request. Contact Customer Service Department for more information.
MT-RJ TERMINATION KIT PAGE 1.19
MT-RJ ADAPTER PRODUCTS
No one offers a wider variety of MT-RJ solutions for the work area. Siemon MT-RJ adapter products are compatible withour current line of MAX™, CT® Coupler and Fiber Outlet Box (FOB) products, allowing a mix of copper and fiber outletsin a single faceplate. Modular furniture, SM® Surface Mount Boxes, and Multi-user Telecommunications OutletAssemblies (MuTOA) solutions are also available.
Siemon also provides a complete, cost effective MT-RJ solution for the telecommunications room. Our MT-RJ Quick-Pack™ adapter plates fit into our existing line of rack and wall mount enclosures. A variety of MT-RJ jumpers(shown below) are also available for patching to active equipment.
Note: For MT-RJ SM® Surface Mount Box compatibility, see page 2.34
MT-RJ CT® COUPLERSSee page 2.6
MT-RJ FOB BEZELSSee page 2.29
MT-RJ MAX™ MODULESSee page 2.18
MT-RJ QUICK-PACK™
ADAPTER PLATESSee page 1.12
MT-RJ FIELD-INSTALLABLE CONNECTORS
Siemon MT-RJ connectors pack all the benefits of duplex fiber optic performance into a compact“RJ” style design. Terminations are quick and easy, utilizing a proven no epoxy/no polish method.Siemon MT-RJ connectors feature two fibers factory-terminated to the ferrule with protruding stubs engaged within a pre-installed splice mechanism. Just prep the cable and insert the fibers into the connecter to complete termination. No epoxy or polish is necessary.
PART # DESCRIPTION
FC2-MT6MM . . . . . . . . . . . . . . MT-RJ duplex connector with pins (male), multimode 62.5/125µm
FC2-MT5MM . . . . . . . . . . . . . . MT-RJ duplex connector with pins (male), multimode 50/125µm
Note: Siemon MT-RJ connectors are compatible with 3.0mm round duplex jacketed or buffered fiber cables
01 00-19 12/14/00 12:08 PM Page 3
T H E S I E M O N . C O M P A N Y1•4
Wor
k Ar
eaSh
ield
edPr
oduc
tsM
odul
arPa
tchi
ng
Rack
s an
dCa
ble
Man
agem
ent
Patc
h Co
rds,
Plug
s an
dCa
ble
S210
Prod
ucts
S110
Prod
ucts
S66
Prod
ucts
Prot
ection
Tool
san
dTe
ster
s
Stan
dard
sOve
rvie
wAp
plic
atio
nGui
deIn
stal
lation
Prac
tice
sGlo
ssar
yIn
dex
Fibe
rPr
oduc
ts
LC PRODUCTS
THE SIEMON LC SYSTEM HIGHLIGHTSSiemon LC products offer all the benefits of SC and ST connections in a Small
Form Factor (SFF), high-density design. LC adapter products are compatible
with our popular MAX,™ CT®, FOB, and SM® work area and telecommunications
room products, providing a wide variety of installation options. LC connectors
take just 2 minutes to terminate, using the Siemon LightSpeed ™ Termination
Kit. Both multimode solutions and singlemode products are available.
HIGHER DENSITYLC connectors are about half thesize of SC duplex connectors,providing greater density.
SIMPLEX LC CONNECTORS TERMINATE
BUFFERED FIBER WHICH HELPS
MAINTAIN PROPER BEND RADIUS
REQUIREMENTS IN TIGHT SPACES
PERFORMANCE AND VARIETYSiemon offers a full line of highperformance singlemode andmultimode LC products providing acomplete solution for anyinstallation.
FAST TERMINATIONLC multimode connectorsterminate in just 2 minutes usingour LightSpeed ™ Termination Kit(with LC upgrade kit) greatlyreducing installation time.
FACTORY TERMINATED LC DUPLEX
JUMPERS COMPLY WITH TIA/EIA 568-AAND ISO/IEC 11801 FIBER
PERFORMANCE SPECIFICATIONS
JUMPER COMBINATIONS
AVAILABLE INCLUDE LC TO LC,LC TO SC, AND LC TO ST
ALL SIEMON LC ADAPTERS ARE “UNIVERSAL”AND SUPPORT EITHER SINGLEMODE OR
MULTIMODE APPLICATIONS
01 00-19 12/14/00 12:08 PM Page 4
T H E S I E M O N . C O M P A N Y1•5
Wor
k Ar
eaSh
ield
edPr
oduc
tsM
odul
arPa
tchi
ng
Rack
s an
dCa
ble
Man
agem
ent
Patc
h Co
rds,
Plug
s an
dCa
ble
S210
Prod
ucts
S110
Prod
ucts
S66
Prod
ucts
Prot
ection
Tool
san
dTe
ster
s
Stan
dard
sOve
rvie
wAp
plic
atio
nGui
deIn
stal
lation
Prac
tice
sGlo
ssar
yIn
dex
Fibe
rPr
oduc
ts
LC JUMPERS
Siemon LC jumpers are factory terminated and polished, assuring optimum performance. LC jumpers areguaranteed to meet TIA/EIA-568-A and ISO/IEC 11801 fiber performance specifications, and are available inLC to LC and hybrid LC to SC and ST options. Both multimode and singlemode jumpers are available.
DUPLEX
FJ2-LCLC(X)MM-(XX) . . . . . . . . LC to LC multimode, 50/125 or 62.5/125µm
FJ2-LCULCU-(XX) . . . . . . . . . . . LC to LC singlemode
FJ2-LCSA(X)MM-(XX) . . . . . . . . LC to ST multimode, 50/125 or 62.5/125µm
FJ2-LCUSAU-(XX) . . . . . . . . . . . LC to ST singlemode
FJ2-LCSC(X)MM-(XX) . . . . . . . . LC to SC multimode, 50/125 or 62.5/125µm
FJ2-LCUSCU-(XX) . . . . . . . . . . . LC to SC singlemode
SIMPLEX
FJ1-LCULCU-(XX) . . . . . . . . . . . LC to LC singlemode
FJ1-LCUSAU-(XX) . . . . . . . . . . . LC to ST singlemode
FJ1-LCUSCU-(XX) . . . . . . . . . . . LC to SC singlemode
LC ADAPTER PRODUCTS
No one offers a wider variety of LC solutions for the work area. Siemon LC adapter products are compatible with ourcurrent line of MAX™, CT® Coupler, and Fiber Outlet Box (FOB) products, allowing a mix of copper and fiber outletsin a single faceplate. Modular furniture, SM® Surface Mount Boxes, and Multi-user Telecommunications OutletAssemblies (MuTOA) solutions are also available.
Siemon also provides a complete, cost-effective LC solution for the telecommunications room. LC Quick-Pack™
Adapter Plates fit into our existing line of rack and wall mount enclosures. A variety of multimode and singlemodeLC jumpers (shown below) are available for patching to active equipment.
Use (X) to specify multimode fiber type: 6 = 62.5/125µm fiber (gray jacket); 5 = 50/125µm fiber (orange jacket)Use (XX) to specify cable length: 01 = 1m (3.3 ft.), 03 = 3m (9.8 ft.), 05 = 5m (16.4 ft.)Notes: Multimode performance: 0.30dB typical insertion loss; 25dB typical return loss;Singlemode performance: 0.30dB typical insertion loss; 55dB minimum return loss;All jumpers and pigtails are manufactured using OFNR riser grade cable that meets UL 1666; All connectors include ceramic ferrules.
LIGHTSPEED ™ TERMINATION KIT PAGE 1.19, LC UPGRADE KIT PAGE 1.19
LC CT® COUPLERSSee page 2.6
LC MAX™ MODULESSee page 2.18
LC FOB BEZELSSee page 2.29
LC SM® BEZELSSee page 2.34
LC QUICK-PACK™
ADAPTER PLATESSee page 1.12
LC FIELD-INSTALLABLE CONNECTORS
Siemon LC connectors pack all the benefits of duplex fiber optic performance into a compact“RJ” style design. LC connectors are compatible with a wide variety of Siemon work area andtelecommunications room solutions. Siemon LC connectors are field-installable, using theeasy, fast, reliable LightSpeed™ termination system. LC multimode connectors terminate either62.5/125 or 50/125µm fiber.
MULTIMODE
FC1-LC-MM-B80. . . . . . . . . . . . LC Simplex connector, multimode, buffered fiber, beige boot
FC2-LC-MM-J80. . . . . . . . . . . . LC Duplex connector, multimode, jacketed fiber, beige boot
SINGLEMODE
FC1-LC-SM-B02 . . . . . . . . . . . . LC Simplex connector, singlemode, buffered fiber, white boot
FC1-LC-SM-J02 . . . . . . . . . . . . LC Simplex connector, singlemode, jacketed fiber, white boot
01 00-19 12/14/00 12:08 PM Page 5
RACK MOUNT INTERCONNECT CENTER (RIC)
T H E S I E M O N . C O M P A N Y1•6
Wor
k Ar
eaSh
ield
edPr
oduc
tsM
odul
arPa
tchi
ng
Rack
s an
dCa
ble
Man
agem
ent
Patc
h Co
rds,
Plug
s an
dCa
ble
S210
Prod
ucts
S110
Prod
ucts
S66
Prod
ucts
Prot
ection
Tool
san
dTe
ster
s
Stan
dard
sOve
rvie
wAp
plic
atio
nGui
deIn
stal
lation
Prac
tice
sGlo
ssar
yIn
dex
Fibe
rPr
oduc
ts
SLIDING TRAYTray slides out the front or the rearfor optimum adapter/connectoraccess. The tray latches in centerposition to prevent it from movingwhile mating and de-matingconnectors.
INTEGRATED LATCHESEnable easy snap-in installationand one-finger removal of adapterplates.
ROTATING GROMMETSFacilitates loading and retainingjumpers while minimizingmicrobending stress when utilizingthe sliding tray.
RIC HIGHLIGHTSThe Siemon Rack Mount Interconnect Center has always been known for
its superior fiber management capabilities and high quality. This year Siemon
has made two important enhancements to the RIC product line. Maximum fiber
capacity has been doubled with the introduction of our new 12-adapter
(24 fiber) MT-RJ Quick-Pack™ adapter plates. Additionally, the entire RIC
product line has been redesigned to accept flat Quick-Pack™ adapter plates,
eliminating the need to order or stock two different types of adapter plates
(flat and angled).
RUGGED 12 GAUGE
ALUMINUM ALLOY
CONSTRUCTION COATED
WITH DURABLE PAINT
FINISH
SPRING LOADED QUICK-RELEASE HINGES ENABLE
EASY REMOVAL OF FRONT
AND REAR DOORS, BUT
ONLY WHEN HINGES ARE
DEFEATED, PREVENTING
MISPLACED OR DAMAGED
DOORS
FRONT LABELING PANEL
CAN BE EASILY REMOVED
VIA TWO SNAP LATCHES
FOR MAXIMUM ACCESS
TO CONNECTIONS
INCLUDES A FRONT AND
REAR LOCKING CLASP TO
SECURE DOORS IN CLOSED
POSITION PLENTY OF SPACE AT THE
FRONT TO ACCESS AND
ORGANIZE FIBER
01 00-19 12/14/00 12:08 PM Page 6
T H E S I E M O N . C O M P A N Y1•7
Wor
k Ar
eaSh
ield
edPr
oduc
tsM
odul
arPa
tchi
ng
Rack
s an
dCa
ble
Man
agem
ent
Patc
h Co
rds,
Plug
s an
dCa
ble
S210
Prod
ucts
S110
Prod
ucts
S66
Prod
ucts
Prot
ection
Tool
san
dTe
ster
s
Stan
dard
sOve
rvie
wAp
plic
atio
nGui
deIn
stal
lation
Prac
tice
sGlo
ssar
yIn
dex
Fibe
rPr
oduc
ts
RACK MOUNT INTERCONNECT CENTER (RIC)
Siemon RIC24-F, 36-F and 48-F enclosures have been redesigned to work with flat Quick-Pack™ adapter plates, simplifying ordering and stocking.Angled adapter plates are still available for compatibility with existing installations. Contact Siemon Customer Service for ordering details.
Note: 1 RMS = 44.5mm (1.75 in.)Use (XX) to specify color: 01 = black, 02 = whiteNote: All RIC products include laser-printable labels*, cable ties, rack-mounting hardware, and pre-installed fiber management clipsNew RIC enclosures are not compatible with angled adapter plates.*Visit our web site or contact our Technical Support Department for labeling software.
FIBER STORAGE CENTER
The Siemon 3 RMS rack mount Fiber Storage Center (FSC) is typically utilized in tandemwith a Rack Mount Interconnect Center (RIC). Fiber jumpers exiting the front of the RICare routed into the FSC to store slack. The fiber management is simple but effective, andis mounted on a tray that slides out the front for easy access to the storage area.
PART # DESCRIPTION
FSC3-(XX) . . . . . . . . . . . . . . . . . Fiber Storage Center, 3 RMS height: 133mm (5.25 in.);width: 432mm (17.00 in.);depth: 380mm (14.95 in.)
Note: 1 RMS = 44.5mm (1.75 in.)Use (XX) to specify color: 01 = black, 02 = white
QUICK-PACK™ ADAPTER PLATES PAGE 1.12, SPLICE TRAYS PAGE 1.13, BEND RADIUS GUIDE PAGE 1.13
PART # DESCRIPTION
RIC24-F-(XX) . . . . . . . . . . . . 24/48/96-port Rack Mount Interconnect Center, 2 RMSheight: 86.6mm (3.41 in.); width: 432mm (17.00 in.); depth: 380mm (14.95 in.)
PART # DESCRIPTION
RIC36-F-(XX) . . . . . . . . . . . . 36/72/144-port Rack Mount Interconnect Center, 2 RMSheight: 86.6mm (3.41 in.); width: 432mm (17.00 in.); depth: 380mm (14.95 in.)
RIC48-F-(XX) . . . . . . . . . . . . 48/96/192-port Rack Mount Interconnect Center, 3 RMSheight: 133mm (5.25 in.); width: 432mm (17.00 in.); depth: 380mm (14.95 in.)
RIC72-F-(XX) . . . . . . . . . . . . 72/144/288-port Rack Mount Interconnect Center, 4 RMSheight: 178mm (7.00 in.); width: 432mm (17.00 in.); depth: 380mm (14.95 in.)
01 00-19 12/14/00 12:09 PM Page 7
T H E S I E M O N . C O M P A N Y
WALL MOUNT INTERCONNECT CENTER (SWIC3)
1•8
Wor
k Ar
eaSh
ield
edPr
oduc
tsM
odul
arPa
tchi
ng
Rack
s an
dCa
ble
Man
agem
ent
Patc
h Co
rds,
Plug
s an
dCa
ble
S210
Prod
ucts
S110
Prod
ucts
S66
Prod
ucts
Prot
ection
Tool
san
dTe
ster
s
Stan
dard
sOve
rvie
wAp
plic
atio
nGui
deIn
stal
lation
Prac
tice
sGlo
ssar
yIn
dex
Fibe
rPr
oduc
ts
EASY ACCESSDoors on enclosures and jumperguard swing open a full 180° toprovide complete front and sideaccess.
SWIC3 HIGHLIGHTSThe Wall Mount Interconnect Center (SWIC3) is a cost-effective fiber
enclosure designed to manage and connect up to 96 fibers. The low-profile,
compact design makes it ideal for telecommunications closets or other
installation areas where wall space is at a premium. The adapter mounting
method is standardized via the utilization of the same snap-in Quick-Pack™
adapter plates used in our family of Rack Mount Interconnect Centers (RICs).
This year all Siemon fiber enclosures, including the SWIC3, have been
modified to accept just flat Quick-Pack™ adapter plates, simplifying ordering
and eliminating the need to stock two different types of plates.
SNAP-IN ADAPTER PLATESUtilizes same Quick-Pack™ adapterplates as RIC enclosures withintegrated latches for snap-ininstallation and one fingerremoval.
DUAL-LEVEL FIBER MANAGERSIncorporates two independentlevels of storage to enable thefiber to be routed at levels thatcorrespond to the adapters.
DOORS ON
ENCLOSURE AND
JUMPER GUARD CAN
BE ORDERED WITH
INDEPENDENT KEY
LOCK OR LATCHING
OPTIONS
DUST-PROOFING
GROMMETS INCLUDED
INTEGRATED HINGED
FIBER GUARD
PROVIDES JUMPER
PROTECTION AND
MANAGEMENT
CONVENIENT LABELING
SYSTEM INCLUDES
REMOVABLE CLEAR
LABEL HOLDERS FOR
STORING AND
PROTECTING FIBER
DOCUMENTATION
OPTIONAL SPLICE TRAY
BRACKET AVAILABLE
FOR MOUNTING
MULTIPLE SPLICE
TRAYS
QUICK-PACK™
ADAPTER PLATES ARE
AVAILABLE WITH SC,ST, FC, MT-RJ, OR LC
ADAPTERS
01 00-19 12/14/00 12:09 PM Page 8
T H E S I E M O N . C O M P A N Y1•9
Wor
k Ar
eaSh
ield
edPr
oduc
tsM
odul
arPa
tchi
ng
Rack
s an
dCa
ble
Man
agem
ent
Patc
h Co
rds,
Plug
s an
dCa
ble
S210
Prod
ucts
S110
Prod
ucts
S66
Prod
ucts
Prot
ection
Tool
san
dTe
ster
s
Stan
dard
sOve
rvie
wAp
plic
atio
nGui
deIn
stal
lation
Prac
tice
sGlo
ssar
yIn
dex
Fibe
rPr
oduc
ts
WALL MOUNT INTERCONNECT CENTER (SWIC3)
Siemon SWIC3 enclosures have been redesigned to work with flat Quick-Pack™ adapter plates, simplifying ordering and stocking. Please note this newdesign is not compatible with angled adapter plates. Angled adapter plates are still available for compatibility with existing installations. ContactSiemon Customer Service for ordering details.
PART # DESCRIPTION
SWIC3-(X)-(XX) . . . . . . . . . . . . . 24/48/96-port Wall Mount Interconnect Center. Includes dual-level fiber managers, port designation labels and removable pocket, dust-proofinggrommets, strain relief hardware, cable ties, and mounting hardware.height: 311mm (12.25 in); width: 311mm (12.25 in); depth: 82.6mm (3.25 in)
Use 1st (X) to specify type of lock on the enclosure: A = key lock A, C = thumb-turn latchUse 2nd (XX) to specify color: 01 = black, 02 = white
PART # DESCRIPTION
SWIC3G-(X)(X)-(XX). . . . . . . . . . 24/48/96-port Wall Mount Interconnect Center with integrated jumper guard.Includes dual-level fiber managers, port designation labels and removable pocket, dust-proofing grommets, strain relief hardware, cable ties, and mounting hardware.height: 311mm (12.25 in); width: 406mm (16 in); depth: 82.6mm (3.25 in)
Use 1st (X) to specify type of lock on the enclosure (left) door: A = key lock A, C = thumb-turn latchUse 2nd (X) to specify type of lock on the guard (right) door:A = key lock A, B = key lock B, C = thumb-turn latchUse (XX) to specify color: 01 = black, 02 = whiteNote: New SWIC3 products are only compatible with flat Quick-Pack™ adapter plates
PART # DESCRIPTION
TRAY-B-(XX) . . . . . . . . . . . . . . . Bracket for mounting splice trays to SWIC3 baseUse (XX) to specify color: 01 = black, 02 = white
FIBER ADAPTER PLATES PAGE 1.12, SPLICE TRAYS PAGE 1.13, BEND RADIUS GUIDE PAGE 1.13
MINI WALL MOUNT INTERCONNECT CENTER (MINI-SWIC3)
The Mini-SWIC3 enables the economical interconnection of fiber in locations where wall space islimited while still providing many of the popular, installer-friendly features of the SWIC3. By acceptingtwo flat Quick-Pack™ adapter plates, the MINI-SWIC3 can accommodate from 6–48 fibers. Also includedare dust-proofing grommets to provide protection from contaminants and bend radius guides to ensureoptimal storage of fiber slack.
PART # DESCRIPTION
SWIC3-M-(XX) . . . . . . . . . . . . . 6/24/48-port Mini Wall Mount Interconnect Centerheight: 218.4mm (8.6 in.);width: 185.4mm (7.3 in.);depth: 82.6mm (3.25 in.)
Use (XX) to specify color: 01 = black, 02 = whiteNote: The MINI-SWIC3 is only compatible with flat Quick-Pack™ adapter plates.
01 00-19 12/14/00 12:09 PM Page 9
T H E S I E M O N . C O M P A N Y1•10
Wor
k Ar
eaSh
ield
edPr
oduc
tsM
odul
arPa
tchi
ng
Rack
s an
dCa
ble
Man
agem
ent
Patc
h Co
rds,
Plug
s an
dCa
ble
S210
Prod
ucts
S110
Prod
ucts
S66
Prod
ucts
Prot
ection
Tool
san
dTe
ster
s
Stan
dard
sOve
rvie
wAp
plic
atio
nGui
deIn
stal
lation
Prac
tice
sGlo
ssar
yIn
dex
Fibe
rPr
oduc
ts
FIBER CONNECTPANEL (FCP3)
FIBER CONNECT PANEL (FCP3) HIGHLIGHTSThe Fiber Connect Panel (FCP3-DWR and FCP3-RACK) rack mount enclosures
economically connect, protect, and manage up to 72 fibers within one Rack
Mount Space (RMS). The FCP3 has been redesigned this year to accept the
same flat Quick-Pack™ adapter plates used in our Rack and Wall Mount
Interconnect Centers. The FCP3-DWR makes access to the connections easy
via a tray that slides out the front or the rear.
QUICK-PACK™ ADAPTER PLATES PAGE 1.12, SPLICE TRAYS PAGE 1.13, COMPRESSION FITTINGS PAGE 1.13
HIGH DENSITYFCP3 enclosures accommodate upto 72 fibers in only 1 RMS on a 19inch rack.
SLIDING TRAYThe FCP3-DWR (drawer version)features a tray that slides out fromthe front or rear, providing easyaccess to fiber connections evenon fully loaded racks.
LANCED TABS PROVIDE CONVENIENT
CABLE ANCHOR POINTS FOR
INCOMING JACKETED CABLES
PART # DESCRIPTION
FCP3-DWR . . . . . . . . . . . . . . . . 6- to 72-port Fiber Connect Panel with sliding tray. Includes mounting brackets, housing/tray, fiber managers, grommets, label holders, and labelsheight: 43.2mm (1.7 in.); width: 482.6mm (19.0 in.); depth: 355.6mm (14.0 in.)
FCP3-RACK. . . . . . . . . . . . . . . . 6- to 72-port Fiber Connect Panel with fixed tray. Includes mounting brackets, housing/cover, fiber managers and grommetheight: 43.2mm (1.7 in.); width: 482.6mm (19.0 in.); depth: 241.3mm (9.5 in.)
REAR FIBER CLIPS MANAGE
CABLE SLACK WHILE
MAINTAINING MINIMUM BEND
RADIUS REQUIREMENTS
FRONT FIBER CLIPS MANAGE
UP TO 36 DUPLEX FIBER JUMPERS
(72 FIBERS TOTAL)
LABEL HOLDER PROTECTS FIBER JUMPERS
AND IS READILY REMOVABLE VIA RELEASE OF
FACTORY-INSTALLED SNAP-LATCHES
OPTIONAL SPLICE TRAYS CAN BE
MOUNTED TO MANAGE AND PROTECT
EITHER MECHANICAL OR FUSION SPLICES
FCP3-RACK
01 00-19 12/14/00 12:09 PM Page 10
T H E S I E M O N . C O M P A N Y1•11
Wor
k Ar
eaSh
ield
edPr
oduc
tsM
odul
arPa
tchi
ng
Rack
s an
dCa
ble
Man
agem
ent
Patc
h Co
rds,
Plug
s an
dCa
ble
S210
Prod
ucts
S110
Prod
ucts
S66
Prod
ucts
Prot
ection
Tool
san
dTe
ster
s
Stan
dard
sOve
rvie
wAp
plic
atio
nGui
deIn
stal
lation
Prac
tice
sGlo
ssar
yIn
dex
Fibe
rPr
oduc
ts
FIBER MANAGEMENTTRAY (FMT)
FIBER ACCESS2 and 3 RMS trays include a rearhinged door to provide convenientaccess to fiber.
PART # DESCRIPTION RMS HEIGHT WIDTH DEPTH
CT-FMT-16-(X). . . . . . . . . . . . . . Fiber tray for 16-port CT® Panel or MAX™ Panel . . . . . . . .1 . . . . . . . .43.2mm (1.7 in.) . . . . . .432mm (17 in.) . . .254mm (10 in.)
CT-FMT-24-(X). . . . . . . . . . . . . . Fiber tray for 24-port CT® Panel or MAX™ Panel . . . . . . . .2 . . . . . . . .86.4mm (3.4 in.) . . . . . .432mm (17 in.) . . .254mm (10 in.)
CT-FMT-32-(X). . . . . . . . . . . . . . Fiber tray for 32-port CT® Panel or MAX™ Panel . . . . . . . .2 . . . . . . . .86.4mm (3.4 in.) . . . . . .432mm (17 in.) . . .254mm (10 in.)
CT-FMT-48-(X). . . . . . . . . . . . . . Fiber tray for 48-port CT® Panel . . . . . . . . . . . . . . . . . . . .3 . . . . . . .129.5mm (5.1 in.) . . . . . .432mm (17 in.) . . .254mm (10 in.)
FIBER MANAGEMENT TRAYS PREASSEMBLED TO CT® PANELS
CT-FMTA-16-(X) . . . . . . . . . . . . Fiber tray preassembled to a 16-port CT® Panel . . . . . . .1 . . . . . . . .43.2mm (1.7 in.) . . . . . .432mm (17 in.) . . .254mm (10 in.)
CT-FMTA-24-(X) . . . . . . . . . . . . Fiber tray preassembled to a 24-port CT® Panel . . . . . . .2 . . . . . . . .86.4mm (3.4 in.) . . . . . .432mm (17 in.) . . .254mm (10 in.)
CT-FMTA-32-(X)* . . . . . . . . . . . Fiber tray preassembled to a 32-port CT® Panel . . . . . . .2 . . . . . . . .86.4mm (3.4 in.) . . . . . .432mm (17 in.) . . .254mm (10 in.)
CT-FMTA-48-(X)* . . . . . . . . . . . Fiber tray preassembled to a 48-port CT® Panel . . . . . . . .3 . . . . . . .129.5mm (5.1 in.) . . . . . .432mm (17 in.) . . .254mm (10 in.)Use (X) to specify inclusion of splice tray: blank = none, 1 = fusion, 2 = mechanical, 3 = fusion with sleeve*Note: for FMT’s ordered with splice trays: 16- and 24-port versions include one 24-splice tray; 32- and 48-port versions include two 24-splice trays.
HIGH DENSITYThe Fiber Management Tray can be used with Siemon’s MAX™ patch panels for higherdensity fiber and multimediaapplications.
ADDITIONAL FEATURES (NOT SHOWN)• THREADED ROD AND WING NUT INCLUDED TO
SECURE MULTIPLE SPLICE TRAYS TO THE BASE
• THE TRAY CAN BE QUICKLY ASSEMBLED TO CT® OR
MAX™ PANELS WITHOUT OCCUPYING ADDITIONAL
RACK SPACE
• STRAIN RELIEF LUGS ARE PROVIDED TO SECURE
CENTRAL STRENGTH MEMBER OF FIBER CABLE
FIBER MANAGEMENT TRAY (FMT) HIGHLIGHTSThe family of Fiber Management Trays (FMT) are an economical solution for
managing fiber cable slack and splice trays. The management trays have been
designed to easily retrofit any standard 1, 2, or 3 RMS CT® or MAX™ Series
Patch Panel and can organize up to 96 fibers. The tray is only 254mm (10 in.)
deep, allowing it to readily fit into cabinet enclosures.
CT® PANELS PAGES 4.8 – 4.9, CT® COUPLERS PAGES 2.2 – 2.7, MAX™ PANELS PAGES 4.6 – 4.7, MAX™ MODULES PAGES 2.14 – 2.19, FIBER SPLICE TRAYS PAGE 1.13
OPTIONAL ST, SC OR ST/SCADAPTER COUPLERS ARE AVAILABLE
IN 2- OR 4-PORT VERSIONS
TRAY IS 18-GAUGE
STEEL WITH A
BLACK FINISH THAT
MATCHES CT®
AND MAX™ PATCH
PANELS
FIBER CAN BE ROUTED IN FROM
THE SIDES OR REAR OF THE TRAY OUR PATENT PENDING DUAL FIBER
MANAGEMENT CLIPS ARE USED TO STORE
SLACK FIBERS WHILE MAINTAINING
MINIMUM BEND RADIUS REQUIREMENTS
EACH 2-PORT COUPLER COMES WITH A
RED AND A BLUE ICON TAB AS WELL AS
TWO ICON TABS TO MATCH THE COUPLER
COLOR. OTHER ICON COLORS ARE
AVAILABLE FOR ADDITIONAL COLOR
CODING OF INDIVIDUAL PORTS
CT® OR MAX™ PANELS AND TRAY
AVAILABLE IN 1, 2, AND 3 RMS AND
WHICH ACCOMMODATE UP TO 96FIBER PORTS
REAR COVER SECURED BY
HEAVY DUTY MAGNETS TO
ENABLE KEYLESS ENTRY
TRANSPARENT COVER
PROVIDES IMPROVED
VISIBILITY DURING
INSTALLATION
01 00-19 12/14/00 12:09 PM Page 11
T H E S I E M O N . C O M P A N Y1•12
Wor
k Ar
eaSh
ield
edPr
oduc
tsM
odul
arPa
tchi
ng
Rack
s an
dCa
ble
Man
agem
ent
Patc
h Co
rds,
Plug
s an
dCa
ble
S210
Prod
ucts
S110
Prod
ucts
S66
Prod
ucts
Prot
ection
Tool
san
dTe
ster
s
Stan
dard
sOve
rvie
wAp
plic
atio
nGui
deIn
stal
lation
Prac
tice
sGlo
ssar
yIn
dex
Fibe
rPr
oduc
ts
Use (XX) to specify Adapter Plate color: 01 = black, 02 = whiteAdd “-C” for ceramic sleeve option on SC, ST, FC, and LC fiber adapters.Each adapter plate with icon pockets includes red, blue, color-matching, and clear icons with paper labels.All adapters are “universal” to support multimode and singlemode fiber applications.Note: All Siemon RIC, SWIC3, MINI-SWIC3 and FCP3 enclosures have been redesigned to work exclusively with flat adapter plates. Angled plates are still available for existing installations. Contact our Customer Service Department for ordering information.
FLAT QUICK-PACK™ ADAPTER PLATES RIC-F-SA6-(XX) . . . . . . . . . .
3 duplex ST adapters (6 fibers) and icon pockets
RIC-F-SC6-(XX). . . . . . . . . . .
3 duplex SC adapters (6 fibers) and icon pockets
RIC-F-MT12-(XX) . . . . . . . . .
6 duplex MT-RJ adapters (12 fibers)
RIC-F-AC6-(XX) . . . . . . . . . .
3 duplex ST-SC adapters(6 fibers, front side = SC) and icon pockets
RIC-F-CA6-(XX) . . . . . . . . . .
3 duplex SC-ST adapters(6 fibers, front side = ST
RIC-F-FC6-(XX) . . . . . . . . . . .
6 FC adapters (6 fibers) and icon pockets
RIC-F-SA8-(XX) . . . . . . . . . .
4 duplex ST adapters (8 fibers) and icon pockets
RIC-F-SA12-(XX). . . . . . . . . .
6 duplex ST adapters (12 fibers, not shown)
RIC-F-SC8-(XX). . . . . . . . . . .
4 duplex SC adapters (8 fibers) and icon pockets
RIC-F-MT16-(XX) . . . . . . . . .
8 duplex MT-RJ adapters (16 fibers)
RIC-F-AC8-(XX) . . . . . . . . . .
4 duplex ST-SC adapters (8 fibers, front side = SC)and icon pockets
RIC-F-CA8-(XX) . . . . . . . . . . 4 duplex SC-ST adapters(8 fibers, front side = ST
RIC-F-FC8-(XX) . . . . . . . . . . .
8 FC adapters (8 fibers) and icon pockets
Note: all Siemon RIC, SWIC, MINI-SWIC and FCP3fiber enclosures have been redesigned to workexclusively with flat Quick-Pack™ adapter plates.
RIC-F-MT24-(XX) . . . . . . . . .
12 duplex MT-RJ adapters (24 fibers)
RIC-F-LC(X)12-(XX) . . . . . . . .
6 duplex LC adapters (12 fibers)Use (X) to specify LC adapter color: blank = beige, U = blue
RIC-F-BLNK-(XX) . . . . . . . . .
Blank adapter plate
RIC-F-SC12-(XX). . . . . . . . . .
6 duplex SC adapters (12 fibers)
01 00-19 12/14/00 12:10 PM Page 12
not shown) not shown)
T H E S I E M O N . C O M P A N Y1•13
Wor
k Ar
eaSh
ield
edPr
oduc
tsM
odul
arPa
tchi
ng
Rack
s an
dCa
ble
Man
agem
ent
Patc
h Co
rds,
Plug
s an
dCa
ble
S210
Prod
ucts
S110
Prod
ucts
S66
Prod
ucts
Prot
ection
Tool
san
dTe
ster
s
Stan
dard
sOve
rvie
wAp
plic
atio
nGui
deIn
stal
lation
Prac
tice
sGlo
ssar
yIn
dex
Fibe
rPr
oduc
ts
BEND RADIUS GUIDE
For use in Siemon fiber enclosures, the Bend Radius Guide (BRG2) maintains optimalfiber bend radius. No tools are required for installation. The BRG2 locks into the bottomof Siemon enclosures via a quarter-turn post on the base. The BRG2 is divided into twosections for independent management of multiple fibers. It can also be stacked usingquarter-turn post to provide additional management options.
PART # DESCRIPTION
BRG2-02. . . . . . . . . . . . . . . . . . Bend radius guide, white
SPLICE TRAYS
These aluminum trays can be ordered with either fusion, mechanical or fusion with sleeve splice holders andcome with a clear, snap-on polycarbonate cover. The standard tray holds up to 24 splices. For tight areas, a mini-tray is available which accommodates up to 12 splices. Trays can be stacked for high-density applications.
STANDARD TRAY DIMENSIONS: MINI TRAY DIMENSIONS: height: 103mm (4.07 in.); height: 103mm (4.07 in.);width: 298mm (11.75 in.); width: 179mm (7.06 in.);depth: 8.13mm (0.32 in.) depth: 8.13mm (0.32 in.)
PART # DESCRIPTION
TRAY-(X) . . . . . . . . . . . . . . . . . . Standard fiber splice tray for up to 24 splicesTRAY-M-(X). . . . . . . . . . . . . . . . Mini fiber splice tray for up to 12 splicesTRAY-R-4 . . . . . . . . . . . . . . . . . Splice tray for ribbon fiber (up to 144 fibers)Use (X) to specify type of splice holder: 1 = fusion, 2 = mechanical, 3 = fusion with sleeveNotes: Mechanical splice holders are compatible with GTE elastomeric, Siecor Camsplice®, Norland splice and Lucent CSL.Fusion with sleeve splice holders can accommodate sleeve diameters from 1.5mm (0.059 in.) to 2mm (0.079 in.).Standard Fusion splice holders are designed for 900 micron buffered fibers or 250 micron coated fibers.
COMPRESSION FITTINGS
Compression fittings are utilized as an alternate method for securing cables to FCP3 fiberenclosures. Compression fittings resist water pressure up to 70psi. Acme threads on thebody prevent skipping, allowing for faster installations of lock-nuts. Polymer materialresists salt water, weak acids, gasoline, alcohol, oil, greases and common solvents.
PART # DESCRIPTION
CF-(XX) . . . . . . . . . . . . . . . . . . . Compression fittingUse (XX) to specify size: 40 = Used for 24-fiber cable; 51 = Used for 36-fiber cable;60 = Used for 72-fiber cable; 70 = Used for 96-fiber cable
COMPRESSION FITTING CONVERSION KITS
Conversion kits provide a means of securing fiber in Siemon rack and wall mount enclosures.These fittings are liquid tight up to 70 psi water pressure and resist salt water, weak acids,gasoline, alcohol, oil, grease and common solvents.
PART # DESCRIPTION
CF-(XX)-(X)P-(XX). . . . . . . . . . . . Compression fitting conversion kitUse first (XX) to specify cable accommodation size: 40 = 24-fiber distribution cable, 51 = 36-fiber distribution cable, 60 = 72-fiber distribution cable (for RIC72enclosures only)Note: For 96-fiber distribution cable, use Siemon p/n CF-70 compression fitting and mount directly to RIC orSWIC3 enclosures.Use (X) to specify enclosure type: R = kit for RIC rack mount enclosures, S = kit for SWIC3 and SWIC3G wallmount enclosures.Use 2nd (XX) to specify color: 01 = black, 02 = white.
RACK MOUNT INTERCONNECT CENTER PAGES 1.6 – 1.7, WALL MOUNT INTERCONNECT CENTER PAGES 1.8 – 1.9
CF-(XX)-SP-01 SWIC3 with conversion kit
CF-(XX)-RP-01 RIC24-F with conversion kit
01 00-19 12/14/00 12:10 PM Page 13
T H E S I E M O N . C O M P A N Y1•14
Wor
k Ar
eaSh
ield
edPr
oduc
tsM
odul
arPa
tchi
ng
Rack
s an
dCa
ble
Man
agem
ent
Patc
h Co
rds,
Plug
s an
dCa
ble
S210
Prod
ucts
S110
Prod
ucts
S66
Prod
ucts
Prot
ection
Tool
san
dTe
ster
s
Stan
dard
sOve
rvie
wAp
plic
atio
nGui
deIn
stal
lation
Prac
tice
sGlo
ssar
yIn
dex
Fibe
rPr
oduc
ts
PLUG AND PLAY FIBER HIGHLIGHTSThe Siemon Company introduces a solution for labor intensive fiber
installation and termination — the fiber Plug and Play system. This system
eliminates all of the labor and logistics of standard fiber installations by
providing a pre-terminated, pre-tested fiber optic connection system.
PLUG AND PLAY FIBER PRODUCTS
FACTORY TERMINATION SIGNIFICANTLY
REDUCES LABOR COSTS DURING INSTALLATION
AND ENSURES 100% HIGH PERFORMANCE
AND RELIABILITY OF THE INSTALLED SYSTEM
CONNECTIVITY IS COMPLETED BY
PLUGGING 6- OR 12-FIBER MPOCONNECTORS IN PLUG AND PLAY
MODULES WHICH CAN BE SNAPPED INTO
WALL OR RACK MOUNT ENCLOSURES
FRONT FIBER CLIPS MANAGE
UP TO 18 DUPLEX FIBER
JUMPERS (36 FIBERS TOTAL)
INSTALLER-FRIENDLY SNAP-IN
DESIGN ENSURES FAST AND
RELIABLE INSTALLATION
LABEL HOLDER PROTECTS FIBER
JUMPERS AND IS READILY REMOVABLE
VIA RELEASE OF SNAP-LATCHES
NO CONNECTORS, TERMINATION
KITS OR CONSUMABLES REQUIRED
SLIDE-OUT DRAWER FOR
EASY FRONT ACCESS
AVAILABLE IN 50/125µM
AND 62.5/125µM FIBER
WITH EITHER ST OR SCINTERFACES
PLUG AND PLAY MODULES Modules feature integratedlatches for snap-in installation andsingle-finger removal.
RACK MOUNT SOLUTION Siemon’s Plug and Play modulescan be used in the Fiber ConnectPanel (FCP3) for a rack mountsolution. See page 1.10 for theFCP3. (available in drawer or rackversions)
WALL MOUNT SOLUTIONPlug and Play modules can beused in Siemon’s Wall MountInterconnect Center (SWIC3) for a wall mount solution. See pages 1.8 – 1.9 for the SWIC3.
PRE-TERMINATED FIBERAll fiber connections are factoryterminated and tested, enablingfaster installation to meet tightdeadlines.
01 00-19 12/14/00 12:10 PM Page 14
T H E S I E M O N . C O M P A N Y1•15
Wor
k Ar
eaSh
ield
edPr
oduc
tsM
odul
arPa
tchi
ng
Rack
s an
dCa
ble
Man
agem
ent
Patc
h Co
rds,
Plug
s an
dCa
ble
S210
Prod
ucts
S110
Prod
ucts
S66
Prod
ucts
Prot
ection
Tool
san
dTe
ster
s
Stan
dard
sOve
rvie
wAp
plic
atio
nGui
deIn
stal
lation
Prac
tice
sGlo
ssar
yIn
dex
Fibe
rPr
oduc
ts
12-Port 6-PortSC Module ST Module
PLUG AND PLAY MODULES
The Plug and Play modules snap into Siemon wall and FCP3 rack mount enclosures to provide individual port access when transitioning from MPO connectors at the rear. The modules are factory terminated and tested for 100% guaranteed performance with eitherST or SC interfaces. Installer-friendly snap-in design ensures fast and reliable installation. 6- or 12-port modules are available.
PART # DESCRIPTION
PP6-SA(X)MM-(XX). . . . . . . . . . 6-port, multimode ST Plug and Play module
PP6-SC(X)MM-(XX) . . . . . . . . . . 6-port, multimode SC Plug and Play module
PP12-SC(X)MM-(XX) . . . . . . . . . 12-port, multimode SC Plug and Play module
Use (X) to specify fiber type: 5 = 50/125µm multimode; 6 = 62.5/125µm multimodeUse (XX) to specify module color: 01 = black, 02 = white
PARAMETER 62.5/125 (850nm/1300nm) 50/125 (850nm/1300nm)
Standard Premium Standard Premium
Max. Attenuation (dB/Km) 3.5/1.0 3.5/1.0 3.5/1.0 3.0/1.0
Min. Bandwidth (MHz-Km) 200/500 220/1000 500/500 500/1000
Min. Gigabit Transmission Distance (m) 275/550 300/750 550/550 600/750
PLUG AND PLAY REEL AND EXTENDER SYSTEM
The cable for the Plug and Play system is provided on cable reels with 6- or 12-fiber MPOconnectors on each end. The cable is available in 50/125µm or 62.5/125µm multimode risergrade fiber cable and can be ordered in any length. A cable pulling eye on one end protectsthe fiber during installation and facilitates fast installation. Cable extenders are also availableto add onto existing Plug and Play reels and include an adapter to join the extender to thecable reel.
PART # DESCRIPTION
FR6-(X)MMR-(XXX) . . . . . . . . . . MPO-to-MPO Plug and Play reel, 6-fiber, with pulling eye
FR12-(X)MMR-(XXX) . . . . . . . . . MPO-to-MPO Plug and Play reel, 12-fiber, with pulling eye
FE6-(X)MMR-(XXX) . . . . . . . . . . MPO-to-MPO Plug and Play fiber extender, 6-fiber, with adapter and pulling eye
FE12-(X)MMR-(XXX) . . . . . . . . . MPO-to-MPO Plug and Play fiber extender, 12-fiber, with adapter and pulling eye
Use (X) to specify fiber type: 5 = 50/125µm multimode, 6 = 62.5/125µm multimodeUse (XXX) to specify length in meters (last X to be “0” or “5” only)Add "P" to end of part number for premium grade fiber performance
01 00-19 12/14/00 12:10 PM Page 15
T H E S I E M O N . C O M P A N Y1•16
Wor
k Ar
eaSh
ield
edPr
oduc
tsM
odul
arPa
tchi
ng
Rack
s an
dCa
ble
Man
agem
ent
Patc
h Co
rds,
Plug
s an
dCa
ble
S210
Prod
ucts
S110
Prod
ucts
S66
Prod
ucts
Prot
ection
Tool
san
dTe
ster
s
Stan
dard
sOve
rvie
wAp
plic
atio
nGui
deIn
stal
lation
Prac
tice
sGlo
ssar
yIn
dex
Fibe
rPr
oduc
ts
ST AND SC FIBER CABLE ASSEMBLIES: JUMPERS AND PIGTAILS
For connecting fiber links, choose from simplex or duplex, multimode (62.5/125µm or 50/125µm) or singlemode, SC or ST, jumpers or pigtails.Assemblies are available in standard lengths of 1, 3, and 5 meters. Custom lengths are also available.
Each and every terminated connector is optically tested so that you can be assured that 100% of the Siemon-built cable assemblies meet the stringentperformance limits established by ANSI/TIA/EIA-568-B-3 and ISO/IEC 11801:1-2 2000.
MT-RJ JUMPERS PAGE 1.3, LC JUMPERS PAGE 1.5
Use (X) to specify multimode fiber type/jacket color:– = 62.5/125µm fiber, orange jacket (Example: FJ2-SASA-MM-03)6 = 62.5/125µm fiber, gray jacket (Example: FJ2-SASA6MM-03)5 = 50/125µm fiber, orange jacket (Example: FJ2-SASA5MM-03)
Use (Y) to specify singlemode polish type: U = Ultra (UPC), A = Angled SC (APC)
Use (XX) to specify cable length: 01 = 1m (3.3 ft.), 03 = 3m (9.8 ft.), 05 = 5m (16.4 ft.)
Custom lengths and jacket colors are available upon request. Contact our Customer Service Department for more information.
Notes: All singlemode cable assemblies feature a yellow jacket.All jumpers are manufactured from OFNR riser grade cable that meets UL 1666.All connectors use a ceramic ferrule.
MULTIMODE
SINGLEMODE OPTICAL PERFORMANCE LIMITSPOLISH TYPE MAX. INSERTION LOSS (DB) MIN. RETURN LOSS (DB)
UPC0.5 DB (0.25 TYPICAL)
55
APC 65
Legend (Return Loss performance level):
UPC = Ultra PC (Physical Contact)
APC = Angled PC (Physical Contact)
SIMPLEX JUMPERS
FJ1-SASA(X)MM-(XX) . . . . . . . . . . ST-ST
FJ1-SCSC(X)MM-(XX) . . . . . . . . . . SC-SC
FJ1-SASC(X)MM-(XX) . . . . . . . . . . ST-SC
DUPLEX JUMPERS
FJ2-SASA(X)MM-(XX) . . . . . . . . . . ST-ST
FJ2-SCSC(X)MM-(XX) . . . . . . . . . . SC-SC
FJ2-SASC(X)MM-(XX) . . . . . . . . . . ST-SC
SINGLEMODESIMPLEX JUMPERS
FJ1-SA(Y)SA(Y)-(XX) . . . . . . . . . . . . ST-ST
FJ1-SC(Y)SC(Y)-(XX) . . . . . . . . . . . . SC-SC
FJ1-SA(Y)SC(Y)-(XX) . . . . . . . . . . . . ST-SC
SIMPLEX PIGTAILS
(BUFFERED)FP1B-SA(Y)-(XX) . . . . . . . . . . . . . . . ST
FP1B-SC(Y)-(XX) . . . . . . . . . . . . . . . SC
DUPLEX JUMPERS
FJ2-SA(Y)SA(Y)-(XX) . . . . . . . . . . . . ST-ST
FJ2-SC(Y)SC(Y)-(XX) . . . . . . . . . . . . SC-SC
FJ2-SA(Y)SC(Y)-(XX) . . . . . . . . . . . . ST-SC
01 00-19 12/14/00 12:10 PM Page 16
T H E S I E M O N . C O M P A N Y1•17
Wor
k Ar
eaSh
ield
edPr
oduc
tsM
odul
arPa
tchi
ng
Rack
s an
dCa
ble
Man
agem
ent
Patc
h Co
rds,
Plug
s an
dCa
ble
S210
Prod
ucts
S110
Prod
ucts
S66
Prod
ucts
Prot
ection
Tool
san
dTe
ster
s
Stan
dard
sOve
rvie
wAp
plic
atio
nGui
deIn
stal
lation
Prac
tice
sGlo
ssar
yIn
dex
Fibe
rPr
oduc
ts
ST AND SC CONNECTORS
Siemon ST and SC connectors are designed for use with a variety of termination methods…epoxy, anaerobic adhesives, and Siemon’s exclusiveLightSpeed™ adhesive system. LightSpeed™ is faster, more user-friendly, more secure, and more resistant to environmental extremes than the commonlyused anaerobic adhesives. Time to terminate a Siemon ST or SC connector using the LightSpeed™ adhesive system and Siemon’s Automated FiberPolisher (FPOL) is less than 2 minutes per end!
The precision zirconia ceramic ferrules utilized in ST and SC multimode connectors enable a typical insertion loss performance of 0.5dB, using amanual polishing method, or 0.2dB using the Automated Fiber Polisher (FPOL). Singlemode connectors typically achieve 0.3dB insertion loss and40dB return loss using a simple manual polishing method.
ST CONNECTORS
The ST connector employs a rugged metal bayonet coupling ring with radial ramps which facilitate engage-ment to the studs of the mating adapter. Two ST connectors are available for jacketed fiber, one with a beigeboot and one with a black boot. The two colors enable easy identification of the fibers when terminating indi-vidual connectors to form a duplex jumper. A connector for buffered fiber is also available as well as a connec-tor that includes all the components required to terminate either jacketed or buffered fiber.
Add “-B” to the end of part number for bulk pack (ST or SC simplex: 100/box; SC duplex: 50/box).
MULTIMODE
FC1-SA-MM-J80 . . . . . . . . . . . Jacketed fiber, beige boot
FC1-SA-MM-J01 . . . . . . . . . . . Jacketed fiber, black boot
FC1-SA-MM-B80 . . . . . . . . . . . Buffered fiber, beige boot
FC1-SA-MM-01 . . . . . . . . . . . . Jacketed/Buffered fiber,black jacketed boot and beige buffered boot
FC1-SA-MM-80 . . . . . . . . . . . . Jacketed/Buffered fiber, beige jacketed boot and beige buffered boot
SINGLEMODE
FC1-SA-SM-J(XX) . . . . . . . . . . . Jacketed fiber
FC1-SA-SM-B(XX). . . . . . . . . . . Buffered fiber
FC1-SA-SM-(XX) . . . . . . . . . . . . Jacketed/Buffered fiberUse (XX) to specify boot color: 02 = white, 06 = blue
MULTIMODE
FC1-SC-MM-J80 . . . . . . . . . . . Simplex, jacketed fiber, beige boot
FC1-SC-MM-J01 . . . . . . . . . . . Simplex, jacketed fiber, black boot
FC1-SC-MM-B80 . . . . . . . . . . . Simplex, buffered fiber, beige boot
FC1-SC-MM-01 . . . . . . . . . . . . Simplex, jacketed/buffered fibers,one black jacketed boot and one beige buffered boot
FC1-SC-MM-80 . . . . . . . . . . . . Simplex, jacketed/buffered fiber,one beige jacketed boot and one beige buffered boot
SINGLEMODE
FC1-SC-SM-J(XX) . . . . . . . . . . . Simplex, jacketed fiber
FC1-SC-SM-B(XX) . . . . . . . . . . . Simplex, buffered fiber
FC1-SC-SM-(XX) . . . . . . . . . . . . Simplex, jacketed/buffered fibers, two jacketed boots, two buffered boots
Use (XX) to specify boot color: 02 = white, 06 = blue
MULTIMODE
FC2-SC-MM-J . . . . . . . . . . . . . Duplex, jacketed fiber,one black boot and one beige boot
FC2-SC-MM-B80 . . . . . . . . . . . Duplex, buffered fiber, two beige boots
FC2-SC-MM . . . . . . . . . . . . . . . Duplex, jacketed/buffered fiber,one black and one beige jacketed boot; two beige buffered boots
SINGLEMODE
FC2-SC-SM-J(XX) . . . . . . . . . . . Duplex, jacketed fiber
FC2-SC-SM-B(XX) . . . . . . . . . . . Duplex, buffered fiber
FC2-SC-SM-(XX) . . . . . . . . . . . . Duplex, jacketed/buffered fiber, two jacketed boots, two buffered boots
Use (XX) to specify boot color: 02 = white, 06 = blue
SC SIMPLEX CONNECTORS
SC simplex connectors employ an outer housing that is color-coded in accordance with TIA/EIA-568-A and ISO/IEC 11801 requirements (beige for multimode and blue for singlemode).
�
SC DUPLEX CONNECTORS
Duplex SC connectors have been enhanced with new user-friendly features. SC connectors now have aduplexing clip, which allows each connector to be removed individually. In the event fiber polarity isreversed during termination, there’s no need to discard the connector. Simply remove connectors from theclip and switch to correct the mistake, saving valuable installation time and money. The duplexing clip alsospeeds troubleshooting. In the event there’s a fault with a single connection, an individual connector canbe removed from the clip and re-terminated without disturbing the adjacent connector.
01 00-19 12/14/00 12:10 PM Page 17
T H E S I E M O N . C O M P A N Y1•18
Wor
k Ar
eaSh
ield
edPr
oduc
tsM
odul
arPa
tchi
ng
Rack
s an
dCa
ble
Man
agem
ent
Patc
h Co
rds,
Plug
s an
dCa
ble
S210
Prod
ucts
S110
Prod
ucts
S66
Prod
ucts
Prot
ection
Tool
san
dTe
ster
s
Stan
dard
sOve
rvie
wAp
plic
atio
nGui
deIn
stal
lation
Prac
tice
sGlo
ssar
yIn
dex
Fibe
rPr
oduc
ts
AUTOMATED FIBER POLISHER
The Siemon Company’s Automated Fiber Polisher (FPOL) is designed to perform a high-quality polish injust 15 seconds (7.5 seconds per connector), reducing polishing time by 66% for two ST, SC, or FCmultimode connectors. Even with the increased speed in polishing time, the insertion loss is typically0.2dB or less. The FPOL is compact, lightweight, portable, and can complete a minimum of 250 polishingcycles (500 connectors) using a standard 9V alkaline battery (AC adapter also included).
PART # DESCRIPTION
FPOL. . . . . . . . . . . . . . . . . . . . . Automated fiber polisher includes: one 9V battery, one spare9V battery, 100 polishing discs, 10 air polishing sheets, work holder, water bottle, 120 volt AC adapter, hard shell carrying case, and instructions
ACCESSORIES
PART # DESCRIPTION
FP-PFD . . . . . . . . . . . . . . . . . . . Polishing discs, 3µm, aluminum oxide 100 discs/bag
FP-PFD1 . . . . . . . . . . . . . . . . . . Super polishing discs, 1µm, diamond, 10 discs/bag
FP-APF . . . . . . . . . . . . . . . . . . . Air polishing sheets, 5µm, aluminum oxide 10 sheets/bag
FP-AC . . . . . . . . . . . . . . . . . . . . AC adapter, 120 volts
FP-WBOT . . . . . . . . . . . . . . . . . Water bottle
TERMINATING FIBER IS FAST AND EASY WITH SIEMON’S LIGHTSPEED™ TERMINATIONS
Terminate fiber faster and more accurately with Siemon’s LightSpeed™ Termination process. Using Siemon’s ST or SC Connectors, LightSpeed™ FiberTermination Kit, and Automated Fiber Polisher, you can complete the entire fiber termination process in less than two minutes!
ST/SC CONNECTORS
Siemon multimode ST and Duplex SCconnectors feature design simplicity andexacting tolerances, which enable easytermination and precise fiber alignment. High quality connector components providethe accuracy and reliability needed forsuperior performance.
LIGHTSPEED™ TERMINATION KIT
The Siemon Fiber Termination Kit containsall the tools and consumables needed toterminate 200 ST or SC multimodeconnectors. It also includes LightSpeed™ FiberOptic Adhesive, a very user-friendly, tintedadhesive which not only speeds thetermination process, but also increases thereliability of the connection via improvedresistance to environmental extremes.
AUTOMATED FIBER POLISHER
The Siemon Company automated FiberPolisher (FPOL) is battery operated andperforms a high-quality, consistent polish ontwo multimode connectors in just 15 seconds!Saves critical installation time whileproviding optimum termination quality.
01 00-19 12/14/00 12:10 PM Page 18
T H E S I E M O N . C O M P A N Y1•19
Wor
k Ar
eaSh
ield
edPr
oduc
tsM
odul
arPa
tchi
ng
Rack
s an
dCa
ble
Man
agem
ent
Patc
h Co
rds,
Plug
s an
dCa
ble
S210
Prod
ucts
S110
Prod
ucts
S66
Prod
ucts
Prot
ection
Tool
san
dTe
ster
s
Stan
dard
sOve
rvie
wAp
plic
atio
nGui
deIn
stal
lation
Prac
tice
sGlo
ssar
yIn
dex
Fibe
rPr
oduc
ts
LC FIBER TERMINATION UPGRADE KIT
The Siemon LC upgrade kit is used in conjunction with the LightSpeed™ Termination Kit(FTERM-L) and has all the accessories to terminate LC connectors using Siemon’s exclusiveLightSpeed™ adhesive. The kit includes an LC microscope head (that attaches to themicroscope included with the FTERM-L), an LC crimp die (which is utilized with the crimptool included with the FTERM-L), an LC polishing puck and a micro-torch* (to shrink thecolor-coded LC crimp sleeve tubings).
PART # DESCRIPTION
FTERM-LC . . . . . . . . . . . . . . . . LC Fiber Termination Upgrade Kit (used in conjunction with FTERM-L)
Note: Contents of FTERM-LC are also available individually. Contact our Customer Service Department for more information.*Butane fuel not included
MT-RJ FIBER TERMINATION KIT
The Siemon MT-RJ termination kit makes field termination of MT-RJ connectors quick andeasy. MT-RJ Duplex connectors can be terminated in less than 2 minutes, which equates toless than 1 minute per fiber! The kit employs proven no-epoxy/no-polish terminationtechnology. All tools required to terminate MT-RJ connectors are included in a durable canvascarrying case.
PART # DESCRIPTION
FTERM-MT . . . . . . . . . . . . . . . . MT-RJ Fiber Termination Kit
Note: Contents of FTERM-MT are also available individually.Contact our Customer Service Department for more information.
LIGHTSPEED™ ST, SC FIBER TERMINATION KITS
Achieve faster fiber terminations and higher performance with Siemon’s LightSpeed™ TerminationKit. The Siemon fiber termination kit contains all the tools and consumables required fortermination of up to 200 multimode ST or SC connectors — packaged in a rugged canvas carryingcase. Use the optional LC Upgrade Kit (see below) for LC connector terminations. Allconsumables, tools and other termination products supplied with the kit can be ordered separately.
The termination kit includes Siemon’s LightSpeed™ adhesive system, which features a 30-secondcure time. The adhesive is tinted green to provide an easy visual indication during the terminationprocess and has an extended 1-year shelf life.
PART # DESCRIPTION
FTERM-L. . . . . . . . . . . . . . . . . . LightSpeed ™ Fiber Termination Kit for ST and SC multimode connectors,includes 27 items (tools/consumables), instructions and case
FT-CKIT-L . . . . . . . . . . . . . . . . . Consumables Kit for FTERM-L
Note: Contents of FTERM Termination Kit are also available individually.Contact our Customer Service Department for more information.This product contains material with a time and temperature sensitive shelf life.Store between 40 - 100 degrees F.
01 00-19 12/14/00 12:11 PM Page 19