Product Catalogue Oct 2018

FIBRE OPTIC ENCLOSURESAND ACCESSORIES

rfi.com.au

Rack Mount Enclosures

Rack Mount Enclosures: SLIDING

Part Number A1US A2US A3USDescription 1RU SLIDING ENCLOSURE, GRAY 2RU SLIDING ENCLOSURE, GRAY 3RU SLIDING ENCLOSURE, GRAY

Dimensions (in) H x W x D 1.8 x 19 x 11.9 3.5 x 19 x 11.9 5.2 x 19 x 11.9

Weight (kg) 3.4 4.2 5.6

Max. no. of adapter plates 2 4 8

Splice Capacity 48 96 192

Max Ingress Cables 2 each side 4 each side 6 each side

Material / Finish Grey powder coated steel Grey powder coated steel Grey powder coated steel

Accessories Supplied with mounting and Cable/fibre management hardware kit

OCC’s rack mountable sliding fibre optic enclosures support the use of both indoor

and outdoor fibre cable types. Suitable for patching or housing direct termination

or splicing of up to 192 fibre cores. The range has various sizes and panel

arrangements and is perfectly suited for a wide range of applications.

Features

nAvailable in 1RU, 2RU and 3RU sizes.

nVariety of front panels.

nHigh quality, long lasting sliding mechanism

nRodent-resistant back panel is available.

nFibre management, connectivity and distribution up to 192 fibres.

nAccommodate up to 8 snap-in OCC angled panels.

nStandard patch panel mounting to fit 19” rack.

nIncludes mounting and cable/fibre management hardware kit.

nRugged steel construction with durable powder coat finish, Grey colour.

nSuitable for various unterminated and pre-terminated cables.

Application

nHigh fibre density applications in the 2RU and 3RU versions

nFusion splicing

nSuitable for fusion splicing, direct termination and pre-terminated cables

Technical Specifications

Wingback Rack Mount Enclosure: FIXEDOCC’s newly redesigned fiber termination enclosure introduces new features to a

well-established product line, making it easier to work with and more aesthetically

pleasing while maintaining the ruggedness expected from OCC. This fiber optic

enclosure allows for easier terminations and greater capacity. The new wingback

enclosure also incorporates features designed to reduce installation time and cost.

This enclosure has been specifically designed for the management of MTP or pre-

terminated cable systems. It is, therefore, ideally suited in the Data Centre, or any

environment requiring quick and efficient connect and disconnect.

Features

Designed with features that benefit both the end user and the installer, OCC’s

new enclosure offers the following:

nAvailable in 1RU size.

nFibre management, connectivity and distribution up to 48 fibres.

nAccommodates 2 snap-in OCC angled panels for various connector types

and densities.

nSuitable for shallow racks where in-rack cable movement is problematic.

nRugged steel construction with durable powder coat finish, Grey colour.

nVariety of front panels.

nWing-back design reduces fiber stress and provides support for proper cable

bends and efficient cable management.

nStandard patch panel mounting to fit 19” rack.

nIncludes mounting and cable/fibre management hardware kit.

nAngled left and right rear cable entry ‘wings’ for easy cable access and fixing.

nRemovable lid for easy installation and access.

nSlotted rear wing for cable tie fixing, No glands required.

nSuitable for various unterminated and pre-terminated cables

nInternal fibre clips for managing incoming cables.

Application

nPre-terminated loose tube or riser cables

nDirect termination of tight buffer cables

nData centres and SAN environments requiring MTP or pre-terminated cabling solutions

Technical Specifications

Part Number A1UC-WDescription 1RU FIXED ENCLOSURE, NO DRAWER, WINGBACK, GRAY

Dimensions (in) H x W x D 1.8 x 19 x 11.9

Weight (kg) 2.5

Max. no. of adapter plates 2

Splice Capacity 48

Material / Finish Grey powder coated steel

Accessories Supplied with mounting and Cable/fibre management hardware kit

Wall Box Enclosure

Part Number AWB2ALDescription LOCKABLE WALL BOX ENCLOSURE, 2 DOOR

Dimensions (in) H x W x D 13.2 x 10.2 x 4.0

Weight (kg) 2.7 kg

Max. no. of adapter plates 2

Splice Capacity 48

Max Ingress Cables 3 each side

Material / Finish Grey powder coated steel

Accessories Supplied with cable/fibre management hardware kit

The OCC hinged wall box enclosure offers the installer a robust, heavy-duty premium

product with a variety of features for easy direct termination or fusion splicing up to

48 fibre cores. It includes cable/Fibre management hardware kit. It accommodates

two standard adapter panels.

Features

nVariety of adaptor panels to suit your connector type.

nFibre management, connectivity and distribution for 12 to 48 fibres.

nHeavy-duty hinge mechanism.

nDouble doors allow ease of access, one lockable door.

nAccommodates 2 snap-in OCC adaptor panels.

nPerfect for Multi-cable applications.

nMultiple knock-out panels for cable routing flexibility.

nRugged steel construction with durable powder coat finish.

nSupports a wide range of splice trays.

nSupplied with fibre management hardware kit.

nSuitable for various unterminated and pre-terminated cables.

nSignificantly reduces the installation time.

nColour: Grey

Technical Specifications

Application

This reliable and reconfigurable system is inherently suited for multi-building

complexes such as hospitals, corporate centres, government facilities and universities

and supports the increasing growth for future applications.

Part Number Description Photo

APN-SCAS12 12 PORT ANGLED SC SIMPLEX UNLOADED PANEL

APN-SCAD12 12 PORT ANGLED SC DUPLEX UNLOADED PANEL

APN-LCAD24 24 PORT ANGLED LC DUPLEX UNLOADED PANEL

APN-STAS12 12 PORT ANGLED ST SIMPLEX UNLOADED PANEL

APN-BLANK FLAT BLANK PANEL

Rack/Wall Mount Adaptor Plates

Part Number Description Photo

A24S RACK MOUNT FIBER SPLICE TRAY 12/24

A48S RACK MOUNT FIBER SPLICE TRAY 24/48

A72S RACK MOUNT FIBER SPLICE TRAY 36/72

A96S RACK MOUNT FIBER SPLICE TRAY 48/96

FSP-45MM1.5MM

FIBRE SPLICE PROTECTORS 45MM LENGTH 1.5MMOD

OCC offers user friendly splice trays for cable management and radius control.

OCC’s rack mount enclosures support a wide variety of adaptor panel configurations including ST Simplex, SC Duplex, SC Simplex and LC

Duplex. They are made from steel and clip into the OCC Rack Mount and Wall Box range of modular enclosures. Convenient push-pins allow easy

installation and removal of adaptor plates. Blank panels are available for use as dust covers. Printed port numbering is available on request.

Rack/Wall Mount Splice trays

Part Number ADR-BDescription COMPACT DIN MOUNT ENCLOSURE

Dimensions (in) H x W x D 6.1 x 2.1 x 4.3

Weight (kg) 0.8

Max. Fibre Count 24

Splice Capacity 6/12/24

Material / Finish Grey powder coated steel

OCC’s line of DIN Rail Mount Enclosures offers a rugged and versatile product line

ideal for secure terminations within industrial settings. It accommodates one modular

front panel making it ideal for smaller fibre count applications of up to 24 fibres. This

compact enclosure makes it possible to direct terminate or fusion splice in much

smaller protected areas. Simplex/duplex adapters are front panel mounted.

Features:

nCompact size for limited space requirements

nDIN rail mount via rear bracket attachment

nSupplied with cable glands, tie down point, internal fibre clips

nScrew fit front panel accommodates SC simplex/duplex, LC duplex or ST/FC

simplex Adaptors

nTop and bottom cable entry to suit installation environment

nDin rail clip fit any standard 35mm DIN rail

nRugged steel construction with durable powder coat finish.

nGrounding screws included for equipment protection

nCan be kitted, pre-loaded or factory pre-terminated

nSplice tray attachment bracket

nOptional internal splice tray allows for fusion splicing pigtails to an incoming

loose tube

nIdeal for various spliced and pre-terminated loose tube and tight buffered cables

Application:

nIndustrial Automation and Control

nOil and GAS

nIntelligent Transport System

nMining

nPower Generation and Transmission

nSCADA Networks

Technical Specifications

Line Part Number Description1 ADR-LCSC/U 24 PORT LC, DUPLEX / 12 PORT SC, SIMPLEX, UNLOADED FRONT PANEL

2 ADR-SCD/U 12 PORT SC, DUPLEX, UNLOADED FRONT PANEL

3 ADR-STS/U 12 PORT ST, SIMPLEX ,UNLOADED FRONT PANEL

Din Mount Front Panel Options

Part Number Description Photo

A12DS DIN MOUNT FIBER SPLICE TRAY 6/12

A24DS DIN MOUNT FIBER SPLICE TRAY 12/24

FSP-45MM1.5MM

FIBRE SPLICE PROTECTORS 45MM LENGTH 1.5MMOD

OCC offers user friendly 6/12 and 12/24 Din mount splice trays for cable management and radius control.

Splice Tray and Heatshrink Splice Protector

Part Number Description Photo

ALCD-SM-BL ADAPTOR LC DUPLEX SM UPC BLUE

ALCD-MM-BE ADAPTOR LC DUPLEX MM UPC BEIGE

ALCD-MM-AQ ADAPTOR LC DUPLEX MM UPC AQUA

ASCS-SM-BL ADAPTOR SC SIMPLEX SM UPC BLUE

ASCS-MM-BE ADAPTOR SC SIMPLEX MM UPC BEIGE

ASCS-MM-AQ ADAPTOR SC SIMPLEX MM UPC AQUA

ASCD-SM-BL ADAPTOR SC DUPLEX SM UPC BLUE

ASCD-MM-BE ADAPTOR SC DUPLEX MM UPC BEIGE

ASCD-MM-AQ ADAPTOR SC DUPLEX MM UPC AQUA

ASTS-SM ADAPTOR ST SIMPLEX SM YELLOW

ASTS-MM ADAPTOR ST SIMPLEX MM RED

Fibre Optic Adaptors

The modular design provides the flexibility to choose from a variety of adaptor types including ST, SC, FC, LC and MTRJ.

DIN Rail Mounted Enclosure

OCC’s Din mount enclosure supports a wide variety of adaptor front panel configurations including ST Simplex, SC Duplex, SC Simplex and LC

Duplex. Printed port numbering is available on request.

1300 000 RFI | enquiry@rfi.com.au | rfi.com.au

AUSTRALIA · AMERICAS · EMEA · NEW ZEALAND

Copyright © 2018 RFI Technology Solutions - All Rights Reserved