001
I S O 9 0 0 1
* LLO
YD'S
REGI
STER QUALITY ASSURANCE UKASQUALITY
MANAGEMENT
FIBRED ROOF COATING
DermaCOTe
Rev. 1, Sept. 2016
PrODUCT DeSCrIPTIONDermaCOTe is a solvent based bituminous coating formulated from pliable bitumen and a petroleum solvent, compounded with cellulose fibres, gelling/wetting agents, stabilizers and mineral stabilizers, to strenghten the liquid bitumen to form a tough and elastic surface. Once cured DermaCOTe will not crack when subjected to the extremes of summer and winter conditions. DermaCOTe special formulation ensures bondability and workability and is capable of withstanding the normal stresses associated with the expansion and contraction of all roofing systems.
PrINCIPaL aPPLICaTIONS DermaCOTe is most suitable for use as a coating for built up roofing systems, metal roofs, exterior foundation walls and concrete decks. Also recommended for the maintenance of old bituminous roofs. DermaCOTe can be used in exposed conditions. DermaCOTe complies with: aSTm D 4479 TYPe II.
aPPLICaTION (User’s Guide) The surface to be coated must be free from dirt, debris and scale and should be thoroughly dry. Rough concrete surfaces and brittle asphalt should be given a coat of DermaPrImer prior to application. NOTE: The DermaPrImer should be cured (Tack free) before application of DermaCOTe. Application is by brush, squeegee or airless spray. Apply the DermaCOTe to the prepared surface as per the coverage rate. Do not over-apply, as doing so will increase the curing time. DermaCOTe is designed as a one coat application. However, if desired, a two coat system can be used by halving the recommended coverage rate L/m2 detailed overleaf. Allow curing (Touch Dry) before applying second coat.
PaCKING DermaCOTe comes in 5L cans, 20L pails and 200L drums.
HeaLTH & SaFeTY As with all chemical products, care should be taken during use and storage. Avoid contact with skin, eyes, mouth and foodstuffs. If accidentally ingested immediately seek prompt qualified medical attention. DO NOT INDUCE VOMITING. Give copious amounts of water to drink. Keep this product out of the reach of children and pets. Reseal all containers after use. Protective clothing and eye protection MUST be worn.
Distributed by:DWI, DERMABIT WATERPROOFINGINDUSTRIES COMPANY LIMITED Head Office P.O.Box: 10308 – Jubail Industrial City 31961 – Saudi Arabia Tel.: +966 13 341 0464 – Fax: +966 13 341 0481 E-Mail: [email protected] Website: www.dermabit.net
Riyadh Branch P.O.Box: 5945 – Riyadh 11432 – Saudi Arabia Tel.: +966 11 464 5988 – Fax: +966 11 463 4100
Jeddah Branch P.O.Box: 3589 – Jeddah 21481 – Saudi Arabia Tel.: +966 12 697 3309 – Fax: +966 12 697 6374
Al-Khobar Branch P.O.Box: 153 – Al-Khobar 31952 – Saudi Arabia Tel.: +966 13 882 3986 – Fax: +966 13 887 8025 A
ll re
ason
able
car
e ha
s b
een
take
n in
pre
par
ing
this
tec
hnic
al in
form
atio
n w
hich
, to
the
bes
t of
our
kno
wle
dge
, is
accu
rate
and
tru
e at
the
tim
e of
prin
ting
this
leafl
et. D
ue t
o ou
r p
olic
y of
con
tinue
d d
evel
opm
ent
wor
k an
d d
epen
din
g up
on t
he a
vaila
bili
ty o
f the
raw
mat
eria
l, cl
ient
s re
qui
rem
ent,
clim
atic
and
env
ironm
enta
l con
diti
ons
the
actu
al t
echn
ical
dat
a m
ay d
iffer
from
tho
se d
escr
ibed
her
ein
as it
may
be
chan
ged
, mod
ified
or
imp
rove
d b
y D
WI w
ithou
t no
tice.
All
reco
mm
end
atio
ns a
nd s
ugge
stio
ns a
re m
ade
in g
ood
faith
and
can
onl
y b
e co
nsid
ered
for
gene
ral g
uid
ance
. No
war
rant
y is
imp
lied
or
give
n b
y us
in r
elat
ion
to a
pp
licat
ion,
as
cond
ition
s fo
r us
e an
d a
ny la
bou
r in
volv
ed, a
re b
eyon
d o
ur c
ontr
ol.
DermaCOTeTeCHNICaL DaTaDWI products are tested at random intervals by independent laboratories to international standards and the results of these tests are available on request. In addition, each batch manufactured is subject to strict quality control procedures to ensure it meets appropriate and applicable standards and/or norms.
TeCHNICaL DaTaDWI products are tested at random intervals by independent laboratories to international standards and the results of these tests are available on request. In addition, each batch manufactured is subject to strict quality control procedures to ensure it meets appropriate and applicable standards and/or norms.
PROPeRty MetHOd tyPicAl VAlue test
Density @ 25°C, kg/L 1.01-1.03 ASTM D 1475
Viscosity@ 25°C, cP 25,000-40,000 (standard) Brookfield (spindle 6, RPM 20) 8,000-16,000 (low viscosity)
Penetration @ 25°C, 100g 5s 20-40 ASTM D 5
Solubility in trichloroethylene, % 99 (min) ASTM D 2042
Water content, % vol <0.05 ASTM D 95
Flash point, COC, °C >40 ASTM D 92
Nonvolatile Matter, % 67-73 ASTM D 6511
Behavior at 60°C <10mm slump, No sagging ASTM D 6511
Adhesion to dry surface Excellent -
Resistance to UV rays No erosion or cracking -
Resistance to mild acids and alkalis Excellent -
Coverage rate per coat Smooth concrete 0.50 TO 0.7L/m² Smooth Asphalt 0.75-1.00L/m²
Metal surface 0.40-0.50L/m²
Service temperature -10°C to +85°C -
Shelf life 1 year -
Toxicity Non-toxic when cured -
Drying time Touch dry, 2-3h - Full cure, 10-12h
UN No. 1992FLAMMABLE LIQUID, TOXICN.O.S.Primary Risk 3Secondary Risk 6.1
SOLVeNT-BaSeD PrODUCTS Use in well ventilated areas, avoid inhaling fumes and do not smoke or permit naked flame where stored or used.
STOraGe Reseal containers after use.
LIqUID PrODUCTS Stir well before use.
STOraGe LIFe Varies with product and climatic conditions but is usually in excess of twelve months. Keep out of direct sunlight. Clean brushes/rollers with white spirit or paraffin after use, or discard safely.