Fiery X3e KYOCERA KM-C2230 Buletin Technic

8/2/2019 Fiery X3e KYOCERA KM-C2230 Buletin Technic

1/19

TECHNICAL BULLETIN KM-C2230 SUBJECT: BULLETIN INDEX 08/09/04

SUBJECT: BULLETIN #

NEW MODEL PRODUCT INFORMATION .....................................................................................1


2/19

RECOMMENDED ACTION FOR FIELD MACHINES

AT SETUP NEXT SERVICE CALL NEXT PM INFORMATION ONLY

TECHNICAL BULLETIN KM-C2230 Bulletin #

KM-C2230-01Model

KM-C2230 Date

08/09/04 Updated Serial NumberFrom introduction Subject

NEW MODEL PRODUCT INFORMATION

The new Kyocera KM-C2230 is designed as a fully functional Color/B&WSystem that can handle the demands of busy workgroups, with top-of-the-lineproductivity and high efficiency. With features such as a Standard

Print/Scan/Internet Fax, PCL Controller, Full-Bleed Paper Handling and256MB of Standard Copy Memory, the KM-C2230 is sure to be a strongaddition to the Kyocera Mita line of Full-Color Copier/Printers.

Key Features of the KM-C2230 are as follows:

22 CPM Letter (Color) 35 CPM Letter (Mono) 4 LED Arrays / 4 Drum Tandem High Yield OPC Drums Standard PCL5c Print Controller 600 dpi Copy/Scan Resolution 600 x 1800 dpi Print Resolution Scan Once, Print Many Standard 256MB of Copier Memory, upgradeable to 512MB Optional 40GB Hard Drive Anti-Counterfeit Technology Optional embedded Fiery X3e+ Controller with added features Energy Star compliant

Available Options are a DP-621 (Document Processor), DF-626 (Saddle Stitch Finisher), PH-620 (Punch Unit forSaddle Stitcher), DF-621 (Staple Finisher), JS-621 (Third Tray for DF-621), DU-621 (Duplex Unit), PF-621/625/627(Paper Feed Cassettes), etc. (See Page 4 for a full list of accessories.)

GENERAL INFORMATION

Product Name KM-C2230Product Code 5HNxxxxProduct Training Learning Center on KMAconnectDiagnostic Center Contact Number 1-800-255-6482Software Solution Group Email [email protected] Web Site kmaconnect.com KMAconnect Help Desk [email protected] Kyocera Mita Web Site kyoceramita.comKyocera Technical Support (Email) [email protected]. Material Safety Data Sheet Requests [email protected]. National Processing Center(Customer Service)

1-866-596-2372 [email protected]


3/19

KM-C2230-01August 9, 2004Page 2

KM-C2230DEALER LIMITED WARRANTY

Kyocera Mita America, Inc. (Kyocera) warrants to the Authorized Dealer that its new ColorMultifunctional Product will be free from defects in workmanship and material under normal useand service for a period of one hundred twenty (120) days from date of Kyocera's invoice to theAuthorized Dealer. Kyocera's obligation hereunder is expressly limited to providing Dealer withthe parts required to repair said product or crediting Dealer's account for the cost of said parts,at Kyocera's election. Photoconductor drums, lamps, exterior covers, consumable parts, and alllabor costs, are specifically excluded from this warranty.

This warranty will not be honored for products which become damaged due to operatornegligence, misuse, accidents, or the use of supplies not meeting Kyocera's specifications; ifservice has been performed on the product by a technician not employed by Kyocera, or one ofits Authorized Dealers; or if the product, or its serial number, has been modified or altered.

THIS WARRANTY SHALL BE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED ORIMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR APARTICULAR PURPOSE, AND KYOCERA SHALL NOT BE LIABLE FOR ANY LOSS ORDAMAGE, DIRECT OR CONSEQUENTIAL, ARISING OUT OF THE USE, OR INABILITY TOUSE, THE PRODUCT.

225 Sand Road P.O. Box 40008Fairfield, New Jersey 07004-0008, USA


4/19


PRODUCT TRAINING

*Product Training Learning Center on KMAconnect (Technical Training)Prerequisites KM-C2030/3130

Online Technical Training is available for the KM-C2230 for Technicians who have successfullycompleted training on the KM-C2030/3130. Log-on to KMAconnect, browse to the LearningCenter and locate the course.

Technicians will automatically be certified after they complete the online course and pass theTest. A Certificate of Completion will be forwarded within a few days after achieving the passinggrade. Each Technician who takes the on-line course must have their own Log-in Nameand Password, so that the Certificates and the Dealer training records are processedcorrectly.

Technical Training on the KM-C2230 for technician (s) who do not meet the prerequisites will beavailable at the National Training Center in Dallas. Enroll on-line through KMAconnect (LearningCenter/Technical Training/Courseware/Classroom Scheduling) or contact your Regional Office.

For your convenience, a KM-C2230 CD-ROM Training Kit is also available using P/N 8995HN60, price $ 88.32. However, we recommend using the Learning Center on KMAconnect, which isavailable at no charge.

SERVICE DOCUMENTATION

Description Part Number PriceKM-C2230 Service Manual 5HN70760 $30.00KM-C2230 Parts List 5HN70770 $15.00DF-626/PH-620 Service Manual 5HR70760 $30.00DF-621/JS-621 Parts List 5HR70770 $20.00KM-C2230 Operation Guide Available on KMAconnect N/C

The DF-626/PH-620 Service Manual contains the DF-621/JS-621, PF-625/627, PF-621, DP-621 and DU-621 ServiceManuals.The DF-621/JS-621 Parts List contains the DF-626, PF-621, PF-625, PF-627, DP-621 and DU-621 Parts Lists.

MAXIMUM MONTHLY VOLUME

KM-C2230 MAX. MONTHLY VOLUME100,000 Sheets


5/19

KM-C2230-01 (revised) December 02 , 2004Page 4

ACCESSORY / OPTIONS

ITEM Part Number DescriptionDP-621 025HP200 Reverse Automatic Document FeederDF-626 025HR200 Saddle Stitch Finisher

PH-620 00108141 Punch Unit Kit for DF-626DF-621 025HS200 Staple FinisherJS-621 025HS201 Third Tray for DF-621DU-621 025HT200 Duplex UnitPF-625 025HV200 Paper Feed Cabinet (500 Sheet x 1 Drawer + Storage)PF-627 025HW200 Paper Feed Cabinet (500 Sheet x 2 Drawers) PF-621 025HX200 Large Capacity Cabinet (2,500 Sheet x 1 Drawer)CB-621 80080800 Copy DeskPlaten Cover Type E 025NH200 Platen CoverFiery X3e 22C-KM 055HY200 Embedded ControllerInterface Kit 055HY201 Interface Kit for Fiery X3e 22C-KMHD-21 055HN200 40GB Hard Disk Drive KitIB-80 055HN201 Parallel Interface Kit for Standard ControllerSD-168-256 82142256 256MB Copier MemoryKit, Memory Upgrade,X3e 128MB

8405G000 128MB Memory Upgrade for Fiery Controller X3e

Mechanical Counter 82140126 Mechanical CounterAttachment Kit for KeyCounter

00108145 Socket Assy

Key Counter B 82142540 Key Counter onlyStaple Cartridge 5AX82010 Staple Cartridge for DF-621 (3,000 pcs x 3 cart/case)Staple Cartridge 5GH82010 Staple Cartridge for DF-626 (5,000 pcs x 3 cart/case)

As a Customer Service, KMA is stocking and selling Memory. You can order from KMA by using the

Part Numbers shown above. Optional DIMMs can also be purchased from TechWorks @www.techworks.com.The X3e 128MB Memory Upgrade Kit is Exclusive Memory for the Fiery and contains Special DIMMs.This is the Only Memory Upgrade that should be used. Other Memory will not be recognized and willvoid the Warranty.

EFI Fiery Options

ITEM Part Number DescriptionKit EFI Densitometer ED-100 84323800 Color CalibratorEFI Color Profiler Kit 84333166 Allows you to Create Color Profiles for color

matching (Spectrometer and Monitor Profiling

SoftwareDocbuilder Pro Dongle Ver 1.5 84328338 Licensing Dongle and Software (Two CDs)Hot Folders 84340075 Graphics Arts Feature for Fiery X3eSpot On 84340076 Graphics Arts Feature for Fiery X3eAuto Trap 84340077 Graphics Arts Feature for Fiery X3eFiery System Software 84339708 KIT,SVCE,V2.0,ENGLISH X3E,

FIERY IC-401/22C-KM

Please refer to Page 13 for instructions to activate a Graphic Arts Feature for the Fiery X3e.


6/19

KM-C2230-01 (revised)December 02 , 2004Page 5

YIELDS OF SUPPLY ITEMS

Description Part Number Yield (Based on 5% Coverage) PriceTK-622K Toner (Black) 0T5HN0US 11.5K Pages $18.00TK-622Y Toner (Yellow) 0T5HNAUS 11.5K Pages $45.00TK-622M Toner (Magenta) 0T5HNBUS 11.5K Pages $45.00TK-622C Toner (Cyan) 0T5HNCUS 11.5K Pages $45.00TD-622K Imaging Unit (Black) 035HN0US 80K Images $109.00TD-622Y Imaging Unit (Yellow) 035HNAUS 50K Images $335.00TD-622M Imaging Unit (Magenta) 035HNBUS 50K Images $335.00TD-622C Imaging Unit (Cyan) 035HNCUS 50K Images $335.00Fuser Unit 5HN70040 300K Pages $437.00Image Transfer Belt Unit 5HN70020 300K Pages $420.51Waste Toner Bottle 5HN70010 30K Pages $18.08Cleaner and Ozone Filter 5HN70050 150K Pages $23.00Transfer Roller Unit 5HN70030 150K Pages $38.00

All Part Numbers and Pricing Subject to Change without Notice.

OPTIONAL DIMM SPECIFICATIONS

The KM-C2230 Standard Copier PCL Controller is equipped with one 256MB DIMM in one slot.The Memory can be expanded up to a maximum of 512MB (256MB + 256MB DIMM). This isshared Memory with the Copier. An Optional 40GB Copier Hard Drive can also be installed. TheHard Drive is a shared resource with the Copier and the PCL Controller.

The Optional Fiery X3e+ is standard-equipped with one 128MB DIMM in the one slot. The Fiery

X3e+ can be expanded up to a maximum of 256MB (128MB + 128MB DIMM). A 10GB Hard Driveis also standard.

MEMORY REFERENCE

Memory Type Standard MaximumStandard PCLController PrinterMemory

256MB DIMM 256MB + 256MB DIMM = 512MB + 40GB HD (Opt)

Optional Fiery X3e+Controller

128MB DIMM 128MB + 128MB = 256MB +10GB HD (Std)

The Standard PCL Controller Memory is shared with the Copier. The PCL Controller is built-into the Copier Main Board. This Memory should not be removed if the Optional Fiery X3e isinstalled.


7/19

KM-C2230-01 (revised)August 19, 2004Page 6

KM-C2230 Firmware

Firmware Name Firmware VersionMSC (MFP Control Board) 4036-10G0-18-00

APP (MFP Control Board) 4036-10G0-18-00Font (MFP Control Board) 4036-10G0-18-00LPH (LED Drive Board) 4036-53G0-03-00IR (Image Processing Board) 4036-23G0-02-00PRT (Control Board) 4036-50G0-22-00Current Firmware for the KM-C2230 will be posted on KMAconnect.Refer to Page 2-32 in the Service Manual for the Procedure on Upgrading Firmware using the Compact Flash Method. Note: Compact Flash Cards cannot be formatted on a Windows Operating System.

Buffalo Technology Compact Flash Cards can be purchased from TechWorks @ www.techworks.com.

NEW & REPAIR PRINTED CIRCUIT BOARDS PCB NAME NEW PCB P/N REPAIR PCB P/N * REPAIR PCB

PRICEPower Supply PCB 5HN76030 8495HN00 $174.07PWB Assy C 5HN71690 8495HN10 $145.25Control Panel Assy 5HN75970 8495HN20 $208.44PWB Assy Z 5HN71710 8495HN30 $39.87PWB Assy MC 5HN76680 8495HN40 $151.28PWB Assy MFP 5HN76670 8495HN50 $769.65

* Repair PCB Price includes credit issued after return of old Board.

Defective replacement PCBs being returned within the 120 Day warranty period must be returned to theNational Return Center utilizing the Online Return Authorization Request Form on KMAconnect. A copyof this form must be filled-out completely and returned with the Circuit Board for Credit. Any associatedmounting brackets, hardware, system software and original packaging must be included with the claim.Credit will then be issued to your account.Defective PCBs out of warranty may be returned for repair to the National Return Center using the OnlineRepair Board Core Form .

All Part Numbers and Pricing Subject to Change without Notice.


8/19


KM-C2230 Machine Specifications

Type Desktop-type printer integrated with scannerCopying System Electrostatic dry-powdered image transfer to plain paperPrinting Process Tandem-type indirect electrostatic recording systemPC Drum Type OPC (organic photo conductor)

Scanning Density Equivalent to 600 dpiPrint Density Equivalent to 600 dpi in main scanning direction 1800 dpi in sub scanning directionPlaten Stationary (mirror scan)Original Scanning Scanning in main scanning direction with a CCD

(one-shot reading system)Registration Rear left edgePaper Feeding System (Standard)

Three-way systemMultiple Bypass: 150 sheets, Envelopes, 10 sheetsTray1: 250 sheets, Envelopes, 20 sheetsTray2: 500 sheets

Exposure System Four-LED exposureDeveloping System HMT developing systemCharging System DC comb electrode Scorotron system with electrode cleaning function

(Manual)Image Transfer System Intermediate transfer belt systemPaper Separating System Selecting either application of nonwoven fabric bias or resistor grounding +

Low-pressure paper separator clawsFusing System Belt fusingTypes of Original Sheets, books, and three-dimensional objectsMax. Original Size 11 17Multiple Copies 1 to 999Warming-up Time 99 sec. or less (at ambient temperature of 23 C and rated source voltage)Image Loss Leading edge: 5 mm, Trailing edge: 3 mm,

Rear edge: 3 mm, Front edge: 3 mmFirst Copy Time (Tray1, full size)

Monochrome print 6.8 sec. or lessColor print 12.8 sec. or less

Copying Speed forMulticopy Cycle (8-1/2 11)

Monochrome print 1-sided: 35 copies/min; 2-sided: 31 copies/minColor print 1-sided: 22 copies/min; 2-sided: 22 copies/min

Fixed Zoom Ratios Full size 1.000Reduction Inch Area: 0.500, 0.647, 0.733, 0.785Enlargement Inch Area: 1.214, 1.294, 1.547, 2.000Variable Zoom Ratios 0.250 to 4.000 in 0.001 incrementsExposure Lamp White rare-gas fluorescent lamp 30 WPower Requirements Voltage: 120 V, ACFrequency 50/60 Hz 0.3 HzMax Power Consumption Less than 1.4 kW (120 V, 12 A)

Dimensions 35-1/2 (W) 28-11/16 (D) 30-1/4 (H) inch (With Bypass open)Space Requirements 39-7/8 (W) 45-1/4 (D) inchWeight 247lbs. (with IU)Grounding Isolation recommendedTermination NEMA Type 5-15R receptacle (120V AC, 2-pole, 3-wire, grounded)

Note: A dedicated AC line with an isolated ground is strongly recommended. A dedicated line mandates the exclusiveuse of an electrical branch circuit where the receptacle grounding terminal is grounded by an insulated groundingconductor that is isolated from the receptacle mounting hardware (per National Electrical Code, Article 250-74,Exception No. 4).


9/19


Built-in Standard PCL Controller

Type Built-in type controllerPrint Speed ( *1) B&W :35 ppm

Color :22 ppmPrinter Language PCL5c

CPU MPC8245-350MHz (using the main unit's CPU)Program ROM 16 MB (8 MB 2); *Including 46 internal fonts.RAM 256 MB (Shared with Copier)Host Interface Ethernet (10/100BASE-TX, RJ-45)

IEEE1284 (Compatible/Nibble/ECP) ( *2) Network Protocol IPX/SPX (Auto, Ethernet II, 802.2, 802.3, 802.3 SNAP)

NetBEUITCP/IPSMTP, POP3, FTP, SNMP, HTTP 1.1DHCP, ARP/ICMP, BOOTPSLP

Network Print Service Pserver (NDS) ... NetWare 4.x, 5.x, 6.xPserver (Bindery) ... NetWare 4.xNDPS ... NetWare 5.x, 6.xSMBRAW Port Printing (Port 9100)IPP 1.1LPDIFAX to print

Data that can be receivedResolution: 200 100, 204 98, 200 200, 204 196,204 391, 300 300, 400 400, 408 391Size: Letter, Legal, LedgerColor Mode: MonochromeCompression method: MH, MR, MMR

Network Scan Functions Scan to FTP with URL NotificationScan to PC with URL NotificationScan to E-MailScan to HDD with URL NotificationTWAINScan to IFAX

Data to be transmittedResolution: 200 200Size: Letter/Legal, TabloidColor Mode: MonochromeCompression method: MH

Software Accessories Drive CDPCL5c Printer Driver, TWAIN Driver, Font Manager, BOX UtilityOS: Windows98/98SE/Me/ NT4.0/ 2000/ XP/ Server 2003Printer Management Utility has been built into the controller firmware.

*1: When printing one side of the same A4 original.*2: The optional Local Interface Kit is required.

If the controller option is not specified, the optional Hard Disk must be installed on the main unit in order for the Storeto HDD settings (printer driver settings), Set Numbering function (printing with distribution numbers), the Scan toHDD operation, and the box function to be used. (In order to use the Set Numbering function, the 256 MB ExpandedMemory must also be installed.)

*See Service Manual for complete specifications.


10/19


DF-626/PH-620 Specifications

Type Multi-Staple Finisher with Saddle Stitch (Booklet)Installation FreestandingDocument Alignment CenterSupplies Staple CartridgeModesNormal Non-Sort

SortSort StapleSaddle Staple

Hole Punch (optional) Non-Sort Hole PunchSort Hole PunchSort Staple Hole Punch

Power Requirements 24 V DC (supplied from the Main Unit)5 V DC (generated by Finisher)

Max. Power Consumption 65 W or lessDimensions 23-3/4 inch (W) 36-3/4 inch (H) 23-3/4 inch (D)Weight 91-3/4 lbPunch UnitPower Requirements Supplied from the Saddle Stitch FinisherDimensions 3-3/4 inch (W) 6-3/4 inch (H) 20-3/4 inch (D)Weight 5-3/4 lbs.

DF-621/JS-621 Specifications

Type Single Staple FinisherInstallation FreestandingDocument Alignment CenterSupplies Staple CartridgeOption Job SeparatorModes Non-Sort/ Sort/ Group/Sort Staple/ Group Staple

Power Requirements 24 V DC (supplied from the main unit)5 V DC (generated by Finisher)Max. Power Consumption 63 W or lessDimensions 21-1/4 inch (W) 38-1/2 inch (H) 25 inch (D)Weight 84 lbs.Job SeparatorName Job separatorInstallation Fixed to FinisherDocument Alignment CenterModes Non-Sort (in the fax or printer output mode)Power Requirements 5 V DC, 24 V DC (supplied from Finisher)Dimensions 13-1/2 inch (W) 5-3/4 inch (H) 20-3/4 inch (D)Weight 3-3/4 lbs.

*See Service Manual for complete specifications.


11/19


PF-625/627 Specifications

Name 1 x 500 Sheet Drawer, 1 Storage Drawer / 2 x 500 Sheet DrawersType Front loading type 2 way paper take-up deviceInstallation Desk typeDocument Alignment CenterPaper Type Plain paper 56 to 110 g/m 2 (15 to 29-1/4 lb)

Recycled paper 60 to 90 g/m 2 (16 to 24 lb)Paper Size 5-1/2 8-1/2R to 11 17Capacity 3rd Drawer 500 sheets

4th Drawer 500 sheetsPower Requirements 24 V DC 10 % (supplied from the main unit)

5 V DC 5 %Max. Power Consumption 15 W or lessDimensions 22-1/2 inch (W) 10-1/4 inch (H) 21-1/2 inch (D)Weight PF-625/500-sheet paper feeder: 48-1/2 lbs.

PF-627/1000-sheet paper feeder: 57 lbs.

PF-621 Specifications

Name Large Capacity TrayType Front loading type paper feederInstallation Desk typeDocument Alignment CenterPaper Type Plain paper 56 to 110 g/m 2 (15 to 29-1/4 lb)

Recycled paper 60 to 90 g/m 2 (16 to 24 lb)Paper Size 8-1/2 11Capacity 2,500 sheets (80 g/m 2, 21-1/4 lb)Power Requirements 24 V DC 10 % (supplied from the main unit)

5 V DC 5 %Max. Power Consumption 45 W or lessDimensions 22-1/2 inch (W) 10-1/4 inch (H) 21-1/2 inch (D)Weight 57 lbs.

DP-621 Specifications

Name Duplexing Document ProcessorType Paper Take-Up

Paper Take-Up from top of stackTransport Endless Belt Transport ModeTurnover Loop Turnover ModePaper Exit U-turn Turnover + Switchback U-Turn Turnover

Mode (only in 1-Sided Mode)Installation Mounted to the main unit with thumb scewsDocument Alignment CenterDocument Loading Face up

Modes Standard Mode 1-Sided Mode / 2-Sided ModeThick Paper Mode 1-Sided ModeMixed Original Detection Mode 1-Sided Mode / 2-Sided Mode

Type of Document Standard Mode Plain Paper1-Sided Mode, 35 to 128 g/m 2 (9-1/4 to 34 lb)2-Sided Mode, 50 to 110 g/m 2 (13-1/4 to 29-1/4 lb)Thick Paper Mode Plain Paper1-Sided Mode, 129 to 210 g/m 2 (34-1/4 to 55-3/4 lb)Mixed Original Detection Mode Plain Paper1-Sided / 2-Sided Mode, 50 to 110 g/m 2 (13-1/4 to 29-1/4 lb)


12/19


DP-621 Specifications (continued)

Detectable Document Size (*1) 5-1/2 8-1/2R / 5-1/2 8-1/2 to 11 17Capacity Standard Mode / Mixed Original Detection Mode

Document Feed Table: 100 sheets, (80 g/m 2, 21-1/4 lb)Original Exit Tray: 100 sheets, (80 g/m 2, 21-1/4 lb)

Thick Paper Mode Document Feed Table: 38 sheets, (210 g/m 2, 55-3/4 lb)

Original Exit Tray: 38 sheets (210 g/m2

, 55-3/4 lb)Power Requirements 24 V DC (supplied from the main unit)5 V DC (generated within the DP)

Max. Power Consumption 60 W or lessDimensions 23 inch (W) 20-1/2 inch (D) 5-1/4 inch (H)Weight 31-1/4 lbs.

(*1) For the Combined Original Detection Mode, Refer to the Mixed Original Detection Enabled Size Combination Tablein the Service Manual.

DU-621 Specifications

Name Duplex Unit

Type Switchback and Circulating Duplex UnitInstallation Mounted on the right side door of main unitDocument Alignment CenterPaper Type Plain paper 60 to 90 g/m 2 (16 to 24 lb)Paper Size 5-1/2 8-1/2R to 12-1/4 18Power Requirements 24 V DC 10 % (supplied from the main unit)

5 V DC 5 % (supplied from the main unit)Max. Power Consumption 17 W or lessDimensions 4-1/4 inch (W) 17-1/4 inch (D) 13-1/2 inch (H)Weight 6-1/2 lbs.

* All Specifications Subject to Change without Notice.* See the Service Manuals for Complete Specifications.


13/19


Fiery X3e+ Overview

700Mhz, Pentium III128MB RAM (256 max.)10GB standard Hard Drive

Options:

128MB MemoryFiery DocBuilder Pro TM 2.0EFI Densitometer TM ED-100EFI Color Profiler TM (Spectrometer and Monitor Profiling Software)

Graphic Arts Feature:Hot Folders,Auto Trapping, or

Spot OnFiery System Includes:

ColorWise : Protools 3.0 Complete in-RIP color managementFiery Scan TM: Hard copy to digital distribution

Fiery Web Tools TM: Remote job managementFiery NetWise TM: Advanced network architectureEFI Command Workstation TM v4.1 (Windows)EFI Command Workstation TM LE (Mac OS 10.2.4 & Later)Fiery Downloader

Fiery Spooler (Mac only)Fiery eMail Port (Windows only)Fiery Printer Delete (Windows only)Fiery FreeForm2 TM

All Specifications are subject to change without notice.


14/19


Graphics Arts Option Activation Process

To activate a specific Graphic Arts Feature, an Activation Certificate for each option must first bepurchased form KMA. Kyocera Mita will forward the Official EFI Activation Certificate. Next, Printthe Fiery Configuration Page to obtain the Fiery X3e+ System Data ID. Login to the EFI Feature

Activation website at www.efi.com/activation and enter the Activation Certification number,System ID, and Fiery Serial # in the appropriate fields. The website provides an ActivationPassword that you enter on the KM-C2230s LCD Display under the Enable Options Menu in theSetup Menu. Restart the KM-C2230 to complete the activation.

TO ACCESS SETUP WHEN THE FIERY X3E IS READY

Make sure the information screen on the Control Panel reads Ready. If Printing, RIPpingappears, or the Fiery X3e is processing, you must wait until the system finishes andreaches the Idle State.

1. Press the Utility Button on the Copier Control Panel.2. In the Touch Panel, press the Controller Detail Button.3. Press the Menu button.4. Use the down arrow button to scroll to Run Setup.5. At the Main Setup window, press the button for the Setup.6. Press OK to run Setup. Wait till setup finishes (approx 1~2 min). Restarting will display.

During setup, the touch screen may default back to the Utility mode. Press the ControllerDetail Button to go back to the Setup Screen. When Setup finishes, you will see Exit Setup atthe top of the menu.

7. Press the arrow down key until you see Enable Options.8. Press the right arrow key next to enable options.

9. Press the right arrow key next to the Option you wish to activate. An asterisk (*) will displaynext to the option. Press Menu at the bottom of the screen.10. Press the arrow down key until you see Password.11. Press the right arrow key next to Password.12. Enter the Password you received from EFI and press Enter.13. Exit Options, Exit Setup.14. Wait for the Controller to restart. Please Wait will display.15. Print a Fiery Configuration Page again. You can confirm the Option is enabled.


15/19


BTUs

ModelPower

Consumption PPM Prints/Hr

Wattsbasedon PPM& Pr/Hr

Wattsbasedon PPM& Pr/Hr kW/hour Total BTU

TotalPrint(W)

TotalReady

(W)Print Ready

(*3421.14)

720W 186W 35 500 171.4W 141.7W 0.3131 1068.5KM-C2230720W 186W 35 1,000 342.9W 97.4W 0.4403 1502.3

Total BTUs are based on Prints per Minute, Prints per Hour, Watts based on PPM & Pr/Hr and Kw/Hour.

KM-C2230 POWER CONSUMPTION

Specification Watts (Copier Only)US/Canada 120 V AC 10%, 60Hz 2%, 13.1AMaximum 14.30W 10%Low Power Mode 123W

Sleep Mode 22W

Copying 720W

Standby 186W

Voltage requirements

Plug-in mode 0.1W

Maximum current US/Canada 13.1A

NEMA 5-15R


16/19


INSTALLATION REQUIREMENTS

Installation Time Approx 30min. (Main Body only)

Standard Temperature 73.4 F (23 C)Standard Humidity 60%RH (Relative Humidity)Temperature Range 50 F ~ 87 F (10 C ~ 30 C)Humidity Range 15% ~ 80%RHCondensation and Humidity Rapid Temperature change, Humidity drift, and condensation should be

avoidedAltitude Maximum 6500 ft. (2000 meters)Illumination Maximum 1,500 luxLevelness Maximum levelness: 5mm (0.2inch)

The Printer must be placed on a level and sturdy surface

WEIGHT AND DIMENSIONS

Specification KM-C2230Width 35 1 / 2 (With Bypass open)Height 30 1 / 4Depth 28 11 / 16Weight (Main unit) 247lbs. (with IU)

MACHINE DIMENSIONS AND SPACE REQUIREMENTS

Allow sufficient access for proper operation and maintenance of the machine.Machine Front: 1014mm/39 7 / 8" Machine Rear: 1151 mm/45 1 / 4"

*All Specifications Subject to Change without Notice.


17/19


KM-C2230 System Overview

Additional Options

The KM-C2230 is configured with a Standard built-in PCL controller.

Note: When using 11 x 17 paper on the DF-626 Saddle Finisher, be sure to pull the tray out tosupport the longer paper.


18/19

KM-C2230-01 (revised) October 15 , 2004Page 17

KM-C2230 Setup Addendum

PROBLEM:

After completing set-up of the KM-C2230, the first test copy out has a gray box overlay.

CAUSE:

The installation procedure for the KM-C2230 has been updated.

SOLUTION: Follow the exact set-up procedure in the Revision 2 Installation Instructions included with the KM-C2230. The Revision 2 Instructions can be identified on the lower left hand corner of the front page(4036-7790-02). The Revision 2 Instructions are also available on KMAconnect.

All steps must be done in the exact order throughout the set-up.

ALL Of The Following Steps Must Be Done In The Exact Order In Tech Rep Mode:

1) Adjusting the Touch Panel2) Performing the Gradation Adjust3) Date/Time Input4) Serial # Input5) Unit Change6) List Output

3) IMPORTANT: Date and Time Input

Both Date and Time & Present Date and Time MUST be input using the Key pad. Even if they arecorrect, they still must be keyed in . If you miss this step, a gray box will display on the first copy.You must then start from the beginning of the setup procedure.


19/19

KM-C2230-01 (revised)October 15 , 2004Page 18

IMPORTANT: List Output

1. Load the 1st drawer with A4L or Letter L paper. (8.5 x 11R)2. Display the Tech. Rep. Mode screen.

(For details of how to display the Tech. Rep. Mode screen, see the service manual.)

3. Select List Output.4. Select Image Processing.

5. Press the start key.6. Then, lists of various kinds will be produced.7. Touch END.8. Touch Fin. Time.9. Turn OFF/ON the Power Switch.

If the copier is turned OFF before completing the set-up procedure, it is necessary to startthe entire procedure from the beginning.

NOTE:

1) The changes to the set-up procedure are effective from serial number 31102601and above. The copier firmware is Version 28 (MSC=4036-10G0-18-00) orabove.

2) The above steps must be done in the exact order and only during the initial set-up. The above steps do not apply when upgrading the copier firmware or whenreplacing a PWB.

3) If any step is skipped, it is necessary to return to that particular step, carry outthe adjustment and continue with the next step.

Date post:	05-Apr-2018
Category:	Documents
Upload:	doru-razvan
View:	228 times
Download:	0 times

Fiery X3e KYOCERA KM-C2230 Buletin Technic

Documents