files & abrasives
143
Belts ......................................................................................147-148Brushes ........................................................................................ 149Convolute Grinding Wheels .......................................................... 146Deburring Wheels ........................................................................ 148Diamond Dressers ....................................................................... 149Discs .................................................................................... 146, 148Emery Cloth ................................................................................. 147
Files ......................................................................................144-145Grinding Wheels ...........................................................145-146, 148Hand Pads .............................................................................147-148Shop Rolls ................................................................................... 147Wire Scratch Brush ...................................................................... 149
For all Your Filing & Abrasive Needs
files & abrasives
ORDER ONLINE @ www.thomasskinner.com144
MILL BastaRD FILEExcellent for a wide range of applications such as sharpening, draw filing, lathe work and general shop use. Mill Files are single cut on the sides and edges and taper towards the point in width.
LONg aNgLE LathE FILEPrimarily for lathe work and bench filing. Long Angle Lathe Files are single cut with both edges safe (uncut) and taper toward the point in width. The teeth are designed on a “long angle” to provide free cutting and rapid filing while leaving a smooth finish.
aMeriCaN PaTTerN filesfiles
sIZE haNDLE #sMOOth ORDER # PRICE
10" 9 or T6 SIM-73255500 $11.11 12" 13 or T7 SIM-73256000 $15.01 14" 13 or T8 SIM-73256500 $20.19
sIZE haNDLE #BastaRD ORDER # PRICE
sECOND CUt ORDER # PRICE
sMOOth ORDER # PRICE
4" 3.2 or T2 73227000 $4.81 SIM-73228000 $6.49 6" 6 or T4 SIM-73230500 $6.93 8" 6 or T5 SIM-73232000 $6.83 SIM-73232500 $7.51 SIM-73233000 $7.99 10" 9 or T6 SIM-73234000 $8.42 SIM-73234500 $9.68 SIM-73235000 $10.67 12" 13 or T7 SIM-73236500 $13.05 SIM-73237000 $14.47 14" T8 73238000 $14.70
sIZE haNDLE #BastaRD ORDER # PRICE
sMOOth ORDER # PRICE
6" 3.2 or T4 SIM-73397000 $5.70 8" 4 or T5 SIM-73398500 $5.24 SIM-73399500 $6.77 10" 5 or T6 SIM-73400500 $6.76 73401500 $8.73
sIZE haNDLE #BastaRD ORDER # PRICE
sECOND CUt ORDER # PRICE
sMOOth ORDER # PRICE
6" 6 or T4 73317500 $9.37 SIM-73318000 $9.71 8" 9 or T5 SIM-73319000 $9.97 SIM-73319500 $11.03 SIM-73320000 $11.79 10" 9 or T6 73321000 $12.40 SIM-73321500 $13.46 73322000 $14.30
sIZE
sLIM taPER
haNDLE #sLIM taPER
ORDER # PRICE
EXtRa sLIM taPER haNDLE #
EXtRa sLIM taPER ORDER
# PRICE6" 3.2 or T4 SIM-73540500 $4.75 3.2 or T4 73549500 $3.81 8" 4 or T5 73538000 $5.31
sIZE haNDLE #BastaRD ORDER # PRICE haNDLE #
sMOOth ORDER # PRICE
6" T4 SIM-73516500 $7.56 4 or T4 SIM-73517500 $8.64 8" T5 SIM-73518000 $9.04 10 or T5 SIM-73519000 $10.42 10" T6 10 or T6 73520500 $12.96
Slim Taper Extra Slim Taper
sIZE haNDLE #BastaRD ORDER # PRICE
sMOOth ORDER # PRICE
8" 6 or T5 73145500 $4.42 73146500 $6.76 10" 9 or T6 SIM-73147500 $5.74 SIM-73148500 $8.26 12" 13 or T7 SIM-73149500 $9.35 73150500 $10.35
FLat FILEExcellent or “hogging” for rapid stock removal. Flat Files are double cut on both sides, single cut on the edges and taper toward the point in width. Flat Files feature the exclusive “wavy tooth” design.
haLF ROUND FILESuperb for rounding out holes, corners and crevices. Half Round Files are double cut on both sides and feature a built-in “twist and roll” action on the half round side produced by the “spiral cut” design and the exclusive “wavy tooth” design on the flat side.
ROUND FILEIntended for enlarging and rounding out circular openings or concave surfaces. Round Files are double cut and taper toward the point in width and thickness.
taPER saw FILEDesigned for filing all types of saws with 60o angle teeth. Taper Saw Files are triangular in shape, have cut edges and taper toward the point in width and thickness.
thREE sqUaRE FILEExcellent for cleaning out corners or for use on cutters, taps and flat surfaces. Three Square Files are double cut and taper toward the point in width and thickness and feature the exclusive “wavy tooth” design.
waRDINg FILEPreferred by locksmiths for filing “wards” in locks and keys. Is great for narrow spaces where other files will not fit. Warding Files are double cut with single-cut edges and taper toward the point in width. Features the exclusive “wavy tooth design”.
FEatUREs:• Woodenfilehandles• Haveathreadedinsertfor
“easy on and easy off”• Reusableandlonglasting
sKrOO-zONfile HaNdles
haNDLE # sIZE ORDER # PRICET4 6" 73992600 $2.32 T5 8" 73992700 $2.58 T6 10" SIM-73992800 $2.81 T7 12" 73992900 $13.43
sIZE haNDLE #sMOOth ORDER # PRICE
4" T2 73480000 $6.58 6" 5.2 or T4 SIM-73482000 $8.22
files & abrasives
ORDER ONLINE @ www.thomasskinner.com 145
Used for applications similar to the larger tangled files and for production work on small electronic parts. Needle files provide excellent detail work capabilities and are available with knurled handles.
Needle filesfiles
sIZE stYLE CUt ORDER # PRICE4" Flat 0 83469000 $12.06 4" Half round 0 83471000 $9.90 4" Round 0 83475000 $9.90
6-1/4" Round 2 83530500 Call4" Equalling 0 83479000 $9.90
6-1/4" Equalling 4 83535500 $11.01
Each assortment contains the twelve most popular shapes packaged in a vinyl sleeve. 6-1/4" file length, cut #2.
Needle file seT
file HaNdles
FILE CaRD wIth BRUshOne side has bristles, the other a card of wire. Files last longer when kept properly cleaned. Excess build-up can cause clogging resulting in slipping, scratching or other filing inefficiencies.
ERgONOMICaLLY DEsIgNEDTwo component plastic handle with a hard, polypropylene core and a layer of thermoplastic elastomer to provide a soft, textured surface for an excellent grip.
file CleaNer
ergO
haNDLE # taNg shaPE ORDER # PRICE5.2 Small PEE-94845210 $2.45 6 Flat PEE-94850610 $7.81 9 Flat PEE-94850910 $9.14 13 Flat PEE-94851310 $6.70 5 Shaped PEE-94860510 $4.43
ORDER # PRICESIM-83551500 $143.42
stEEL/ss - tYPE a30-BF ONOXdePressed CeNTer WHeels
griNdiNg WHeels
sPEC sPEC MaX RPM ORDER # PRICE(Ea)4-1/2 x 1/4 x 7/8" A30-BF 13,280 TYR-367545 $3.76
5 x 1/4 x 7/8" A30-BF 12,220 TYR-367548 $4.23
Sold in packages of 10
whEEL DIMENsIONs
sPECIFICatIONs & ORDER #
PRICE10a60
MEDIUM10a80 FINE
6 x 1 x 1" TYR-188815 $22.89 7 x 1 x 1" TYR-188834 $27.12 8 x 1 x 1" TYR-188817 $33.11
whEEL DIMENsIONs
sPECIFCatION & ORDER #
PRICE89a60V6 x 1 x 1" TYR-281499 $27.82 8 x 1 x 1" TYR-3224 $45.28
aLUMINUM OXIDE -10a- shaPE 1 - VItRIFIEDWheels are supplied with nested bushings. Rough grinding of standard mild steel on stationary bench and pedestal machines.
beNCH & PedesTal griNdiNg WHeels - greY
C- sILICON CaRBIDE - shaPE 1 - VItRIFIED
beNCH & PedesTal griNdiNg WHeels - greeN
C- sILICON CaRBIDE - shaPE 1 - VItRIFIED
beNCH & PedesTal griNdiNg WHeels - WHiTe
PREMIUM MIX aLUMINUM OXIDE - 92a shaPE 1 - VItRIFIEDaPPLICatIONs:• 92Apremiumabrasive• 601gritforfinishing• Forhard,toughtogrindmaterial• Hardenedtoolsteel• Highcarbon/highchrome• ExcellentforgrindingD-2
mild steel on stationary bench and pedestal machines
surfaCe griNdiNg WHeels - blue fOr d2
whEEL DIMENsIONs
sPECIFICatION & ORDER #
PRICE92a601J77 x 1/2 x 1-1/4" 342569 $30.88 8 x 1/2 x 1-1/4" 167918 $34.52
Re-grinding of tungsten carbide tools on bench and pedestal machines only.DEsCRIPtION ORDER # PRICE
File card with brush SIM-73993500 $13.10 File card (only) 73993000 $9.17
whEEL DIMENsIONs
sPECIFICatIONs & ORDER #
PRICEC80JV
MEDIUMC1001V
FINE6 x 3/4 x 1" TYR-281520 $27.12 6 x 1 x 1" TYR-281507 TYR-281526 $29.94 7 x 1 x 1" TYR-281521 $38.74 8 x 1 x 1" TYR-281501 $42.26
Re-grinding of tungsten carbide tools on bench and pedestal machines only.
files & abrasives
ORDER ONLINE @ www.thomasskinner.com146
ORDER # PRICE31605 $83.68
FIBRatEXFEatUREs:• Improved
resin bond system
• Highquality synthetic web
• 6"x1"x1"• 9-FSgritBENEFIts:• Freecutting• Usebothwetanddry• LonglifeforheavydeburringaPPLICatIONs:Ideal for heavy deburring, edge breaking and removing parting lines on exotic metals.
HeavY duTY CONvOluTe WHeels
FIBRatEXFEatUREs:• Uniqueresin
chemistry• Denseanddurable• 6"x1"x1"• 8-MAgritBENEFIts:• Smearandheatresistant• LonglastingaPPLICatIONs:• Generaldeburring• Blendingcoatedabrasivescratchpatterns• Polishingstainlesssteelcutlery• Polishinggolfclubs• Edgeradiusing
FIBRatEXFEatUREs:• Controlledporositybond• 8"x1/2"x1-1/4"BENEFIts:• MaximumproductivityaPPLICatIONs:• Forheavystockremoval,heat-sensitive
applications
deburr & fiNisH
COOl MedalisT r CeraMiC aluMiNa
ORDER # PRICECAR-15713 $75.19
FEatUREs:• Premiumceramicand
high performance zirconia blend abrasive
• Resinbond• Reactivefiller
PreMier red zirCONia/CeraMiC bleNd resiN fibre
disCs
6" x 0" Link Disc Roll
Sold in packages of 10
ZIRCONIa aLUMINa REsIN PaPER OPEN stICk-ON DIsCsFEatUREs:• Premium
zirconia alumina abrasive
• Fullphenolic bond system plus latex
• E-weightPSAlatexpaperbacking
sTiCK-ON PreMier red
BENEFIts:• Fastremovalrates• Extendedlife• Maximumdurabilityplusflexibility• Excellentgrainadhesion• Reducededgeshed• EasyapplicationandremovalaPPLICatIONs:Best choice for stripping paint and rust, as well as blending welds.
aLUMINUM OXIDE DRI-LUBE REsIN PaPER OPEN stICk-ON DIsC ROLL
sTiCK-ON CarbO gOld
FEatUREs:• P-gradedaluminumoxideabrasive• Fullresinbondsystem• X-weightcottonbacking• PSAbackingBENEFIts:• Toughanddurablewithaggressivecutting
action• Increasedstrength• Higherresistancetotearversuspaper• EasyapplicationandremovalaPPLICatIONs:Ideal for sanding all ferrous metals on stationary disc sanders.
sTiCK-ON aluMiNuM OXide resiN ClOTH
gRIt ORDER # PRICE(Ea)P40 CAR-21301 $74.66
Sold in packages of 50
6" x 0" Link Disc Roll
Sold in packages of 10
12" x 0"tYPE gRIt ORDER # PRICE(Ea)
XC0877 36 17521 $7.14 XC0877 60 CAR-17523 $6.03 XC0877 80 CAR-17524 $5.63
FEatUREs:• Premium
P-graded aluminum oxide abrasive
• Specialstearateoversize
• DurableC-weightbacking
BENEFIts:• Fastcut,longlife• Excellentloadresistance• HightearresistanceaPPLICatIONs:Ideal for sanding paints, primers, plastics and fibreglass, as well as whitewood sanding, clean-up and repair.
tYPE gRIt ORDER # PRICE(Ea)V1247 36 CAR-10712 $2.26 V1247 60 CAR-20069 $1.93
Sold in packages of 25
gRaDINg MaX RPM ORDER # PRICE(Ea)46-HVPP 3,600 5539564503 $127.60
Sold in packages of 5
• Heavyfibrebacking• 5"x7/8"BENEFIts:• Longerlife,especiallyonhard-to-grindmaterials• Ultratough,aggressiveyetcoolcuttingandself
sharpening• Increasedstrength,durabilityandgrain
adhesion• Enhancedgrindingaction• StrengthandtearresistanceaPPLICatIONs:Ideal for heavy duty grinding of welds, gates,risers and parting lines on castings and carbon steels. The best choice for stainless steels.
MFg # gRIt ORDER # PRICE(Ea)10567 P80 CAR-10567 $43.39
files & abrasives
ORDER ONLINE @ www.thomasskinner.com 147
Carborundum Abrasives FastTrack Service offers you all of the advantages of a major coated abrasives manufacturer combined with the benefits of a fast coated abrasive belt convertor.• Made-to-orderNarrowBeltsshippedfrom
manufacturer in two dayst
fasT-TraCKbelTs
tYPE gRaIN BaCkINg watERPROOFYP 0986W Heat-treated aluminum oxide Y-weight polyester YesYP 1186W Zirconia alumina Y-weight polyester YesXP0966W Heat-treated aluminum oxide X-weightpolyester Yes
SX395 Heat-treated aluminum oxide X-weightpolyester Yes
Sold in packages of 10* Zirconia
t Allow 10 - 14 days delivery
tYPE gRIt ORDER # PRICE(Ea)2" x 48"YP 0986W 50 80180 $5.46
*YP 1186W 50 CAR-80190 $6.63 3" x 79"XP0986W 36 CAR-80450 $13.27
SX395 60 CAR-57447 $7.86 3" x 90"YP 0986W 36 80575 $14.70
SX395 60 CAR-56683 $8.67 SX395 80 CAR-69519 $7.77
4" x 36"XP0966W 60 85050 $7.14 XP0966W 80 CAR-85100 $6.36
4" x 39-1/2"XP0966W 60 51985 $7.57
4" x 132"*YP 1186W 36 CAR-85225 $28.77 *YP 1186W 60 85325 $29.65 6" x 48"*YP 1186W 36 CAR-85550 $25.86 *YP 1186W 50 CAR-85600 $19.52 YP 0966W 60 CAR-85625 $12.11 XP0966W 80 85650 $11.66 XP0966W 100 85675 $11.66 XP0966W 120 CAR-85700 $11.66
6" x 79"XP0966W 100 85850 $16.06
6" x 98"XP0966W 80 CAR-85875 $16.33
FEatUREs:• Non-wovennylon,lowdensityproduct
impregnated with abrasive grain• DifferentspecificationsBENEFIts:• Excellentconformabilityandflexibility• Replacementforsteelwoolandwirebrushes• EasytofoldaPPLICatIONs:
fibraTeXHaNd Pads
6" x 9"gRIt COLOUR ORDER # PRICE(Ea)
Medium S/C Grey CAR-74600 $1.86 General purpose Green CAR-79600 $1.13
Very fine A/0 Maroon CAR-74700 $1.13 Sold in packages of 20
finishing, removal of rust and oxidation from metals and lightly sanding old paint or new primers.
GRAY - A medium silicon carbide, that is open denier, primarily used for all types of blending applications.GREEN - An economical pad for general clean up as well as finishing stainless steel in the food processing industry.MAROON - A very fine (240-360) aluminum oxide for general cleaning and
FEatUREs:• Naturalemeryabrasive• FlexiblecottonbackingBENEFIts:• Softbynatureforlightabradingandsanding• FollowsshapesandcontoursaPPLICatIONs:Used for removing light burrs and cleaning and polishing metals. May be used dry or with oil.
eMerY ClOTHFEatUREs:• P-gradedbrownaluminumoxideabrasive• Flexiblecottonbacking• DispenserboxedBENEFIts:• Toughanddurable• Followsshapesandcontours• ConvenienceaPPLICatIONs:Ideal for cleaning and deburring metal surfaces. May be used dry or with oil. Easily dispensed from the package. Cut or tear to desired length.
aluMiNuM OXide ClOTHsHOP rOlls
tYPE gRIt ORDER # PRICE(Ea)JC 0250 Medium 10885 $1.63 JC 0250 Fine CAR-10886 $1.66
9" x 11"
Sold in packages
of 50
• Made-to-orderStationaryand Wide Belts shipped from manufacturer in five dayst
• NEWFileBeltsandPortableBelts shipped from manufacturer in five dayst
Carborundum Abrasives holds jumbo inventories of their most popular products in their strategically located FastTrack Centres and provide 24 hour emergency servicet.aLUMINUM OXIDE CLOth “aLO”Heat-treated aluminum oxide abrasive with polyester backings for weld removal and finishing ferrous and non-ferrous materials. 24-400 Grit Range.ZIRCONIa aLUMINa CLOth “ZIRC”Zirconia alumina abrasive with heavy-duty polyester backings for weld removal and finishing ferrous and non-ferrous materials. 24-220 Grit Range.• Highperformance• Faster,moreaggressive• Longerbeltlife
1" x 50 YardsgRIt ORDER # PRICE
60 10141 $27.09 80 CAR-97055 $21.58 120 CAR-97058 $21.58 180 97060 $21.58 240 CAR-97061 $21.58 320 CAR-97062 $21.58
2" x 50 YardsgRIt ORDER # PRICE
50 CAR-97083 $50.73 80 CAR-29350 $40.40 120 CAR-29348 $40.40 180 CAR-97093 $40.40 240 CAR-97094 $40.40
gRIt ORDER # PRICE60 CAR-97069 $37.92 80 CAR-97070 $31.54 120 CAR-97075 $31.54 180 97078 $31.54 240 CAR-97079 $31.54 320 CAR-97080 $31.54 400 CAR-97081 $31.54
1-1/2" x 50 Yards
files & abrasives
ORDER ONLINE @ www.thomasskinner.com148
DIaMaX RPM gRIt COLOR ORDER #
PRICE (Ea)
2" 25,000 36 Brown MMM-AB22398 $33.00 50 Green MMM-AB22399 $31.50 60 Orange MMM-AB22400 $22.50 80 Yellow MMM-AB22401 $28.00
P100 Blue MMM-AB22402 $28.00 3" 20,000 50 Green MMM-AB22394 $0.77
60 Orange MMM-AB22395 $38.00 80 Yellow MMM-AB22404 $37.50
P120 White MMM-AB22406 $0.75
DIaMaX RPM gRIt COLOR ORDER #
PRICE (Ea)
3" 18,000 Very fine Blue MMM-SB05530 $46.50 Medium Maroon MMM-SB05531 $46.50 Coarse Brown MMM-SB05532 $46.50
FEatUREs:• Anon-wovenabrasiveproductused
for cleaning, finishing, blending and deburring applications
• Athreadedattachmentsystemsecuresthe disc to the holder
• Removesgrindmarks,rustandcoatings
• Soldin packages of 25
sCOTCH-briTe rOlOC Tr surfaCe CONdiTiONiNg
disCs
FEatUREs:• Aluminumoxide-Cwt.Paper• Forpaint,primer,wood,metal,plasticand
fiberglass• Strongpaperbackingprovidesdurability
and increased cut rate• Opencoatminimizesloading• Invisible3Mcoatingreduces
loading• Soldinpackagesof100
sTiKiT disC rOll 236u
FEatUREs:• Providesafast,efficientmethodfor
grinding, blending, leveling and finishing on all types of mild steel
• Locksecurelyinplacewithahalftwist
rOlOC Tr disCs 361f
• Analuminumoxide disc constructed on a YF-weight, water resistant polyester cloth backing
• Resinbondedforheat resistance
• Canberunwetordry
• Soldinpackagesof 50
sIZE gRaDE ORDER # PRICE6 x 48" 80 MMM-AB01458 $7.88
7447 FEatUREs:• Excellentstartingpointtoclean,finish,grain,
denib and defuzz• Maybeusedbyhand,withahandpadblock,
or on an in-line sander7448 FEatUREs:• Excellentforfinalfinishingandlightcleaning• Maybeusedby
hand, with a hand block, or on an in-line sander
7447 & 7448 sCOTCH-briTe
HaNd Pads
sIZE gRIt COLOR ORDER # PRICE6" x 9" Very fine Maroon MMM-SB7447B $1.04
Ultra fine Light grey MMM-SB7448B $1.04
FEatUREs:• Analuminumoxideclothbelt
constructedonaX-weight• Durableclothbacking• Resinbondedforheatresistance• Filmmediasplice• Goodgeneralpurposebelt
for woodworking, particularly on harder woods
341d belTClOTH belT & baNds
FEatUREs:• Analuminumoxideconstructedona
X-weightclothbacking• Fastcutandlonglife• Generalpurposeevenrun band at a value price
341d baNds
FEatUREs:• Excellentfordeburringandpolishingawiderange
of metals, plastics and composites• Coolrunningallowsmorepressuretobeapplied• Cleanerthanbuffsandcompounds• Soldin
packages of 40
sCOTCH-briTe eXl uNiTizeddeburriNg WHeel
sIZE gRaDE ORDER # PRICE(Ea)
3 x 1/4 x 3/8" Medium MMM-61500070406 $8.09
sIZE gRaDE ORDER # PRICE
1.5 x 1.5" 120 60440201063 $34.38 2.0 x 2.0" 60 60440201121 $55.00
DIa gRaDE ORDER # PRICE(Ea)6" P80 MMM-AB86468 $45.87
P100 MMM-AB86469 $45.87 P150 MMM-AB86471 $45.87 P180 MMM-AB86472 $45.87 P220 MMM-AB86473 $45.87 P240 MMM-AB86474 $45.87
files & abrasives
ORDER ONLINE @ www.thomasskinner.com 149
One set of adapters supplied with each wheel
MFg #BRUsh
DIa wIRE sIZEFaCE
wIDth MaX RPM ORDER # PRICEM12630 6" .014" 7/8" 6,000 FEL-M120630 $28.73 M12830 8" .014" 7/8" 4,500 FEL-M12830 $41.89 M131030 10" .014" 1-1/4" 3,500 M131030 $83.03
CPFB-s FEatUREs:• Heavydutybrush• Excellentforremovinghandlingmarksand
surface imperfectionsCFFB-s FEatUREs:• Idealfordecorativefinishesandlight
deburring applications
sCOTCH-briTe
POWer brusHesflaP brusHes
MFg # BRUsh DIa wIRE sIZE aRBOR sIZE ORDER # PRICEC404 4" .02" 5/8" threaded FEL-424T $33.13
BRUsh DIa wIRE sIZE aRBOR sIZE MaX RPM ORDER # PRICE4" .02" 5/8 - 11" NC 18,000 FEL-814T $17.74
6-1/2" .02" 5/8 - 11" NC 12,000 FEL-817T $29.84
sINgLE ROwFEatUREs:• Filledwithhighqualitysteelwire• Designedforuseinhighspeed
pneumatic and electrical portable tools • Strong,efficienttoolsforfastheavy-
duty cleaning of large metals surfaces
TWisTed KNOT Wire CuP brusH
FILLED wIth hIgh qUaLItY stEEL wIREEspecially suited for fast, efficient cleaning of groove and bead welds, corners and T-connections. Narrow face, stiff wheels. To be used in pipe fabrication, brushing expansion joints, narrow grooves.
KNOT sTYle WHeel brusH - sTriNger bead
FILLED wIth hIgh qUaLItY stEEL wIREExcellent performance for a broad range of industrial applications:
MaJOr Wire WHeels
aDaPtERs - MEtaL For all 2" centre major wire wheels. One pair furnished with each wheel when arbor hole is specified. May be ordered separately. Available sizes 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2" and 1-3/4".
MaJOr Wire WHeels aCCessOries
MFg # aRBOR sIZE ORDER # PRICEAD212 1/2" FEL-00720 $1.91 AD258 5/8" FEL-00730 $1.91 AD2112 1-1/2" FEL-00770 $1.91
• Edgeblending• Deburring• Surfaceretouching
• Dustremovaland many other jobs.
Wire sCraTCH brusH
Popular all-purpose brush for cleaning structural steel, iron works, castings, all types of dirt and rust removal. Brushes are filled with oil tempered steel wire.FEatUREs:• 6"lengthofbrush• 10"overalllength
• Usedtoremoveweldscale,rust, old paint and corrosion
• Forruggedjob
ROws ORDER # PRICE4 x 19" FEL-188 $2.85
whEEL sIZE tYPE shaNk ORDER # PRICE6 - 8" 1/4 CTS 3/8" TYR-20908195 $54.24 6 - 8" 1/4 CTS 7/16" TYR-20908203 $69.00 8 - 10" 1/3 CTS 3/8" TYR-20908197 $65.04 8 - 10" 1/3 CTS 7/16" TYR-20908204 $65.04 8 - 10" 1/3 CTS 1/2" TYR-20908198 $61.99 10 - 12" 1/2 CTS 7/16" 20908205 $105.66 12 - 20" 1 CTS 7/16" 20908206 $227.59
siNgle POiNT diaMONd dressersdiaMONd TOOls
Call our Customer Service Team at 1-866-999-3117
for all your File & Abrasive needs.
3" x 1-3/4"
Sold in packages of 10
gRaDE ORDER # PRICE(Ea)Medium MMM-FN510079349 $29.84 Coarse MMM-FN510079406 $30.73
Fine MMM-FN510079364 $30.35
files & abrasives
ORDER ONLINE @ www.thomasskinner.com150
annual events
open houses
demonstrationshands-on training
educational seminars
It’s not enough to simply sell products. We strive to provide opportunities for our customers to learn and grow by hosting various events throughout the year.Our Open houses always include exciting demo’s, a large number of suppliers and great food!Our Educational seminar topics range from Set-up Reduction to Improving Your Productivity.We offer hands-on turning & Milling training at our state-of-the-art Edmonton Training facility!All of our showrooms are equipped to run Demonstrations - call your local Machine Tool Sales Representative to set one up!Please visit our website www.thomasskinner.com for upcoming dates.