of 16
7/29/2019 FilestoreDownload.avk
1/16
7/29/2019 FilestoreDownload.avk
2/16
AVK UK
As part o the AVK Group we pride ourselves on being one o the
leading valves and ttings manuacturers or the water, sewage,
re ghting and gas industries, worldwide.
Our product program comprises a large range o valves,
hydrants, pipe ttings and accessories, each complying with the
highest standards o saety and durability.
Our ocus is on the product design and manuacture to the
British Standards, however, the AVK Group today oers products
in conormity with most national and international standards.
Our global position ensures that we are able to provide you, your
partners and your customers the quality products you require.
Product development
Market proximity has always been at the core o AVKs strategy;
close contact with the end-user ensures close monitoring o the
market and constant adaptation and development o the product
programme to meet with market requirements.
This takes place in our development department in Denmark, an
advanced technology centre, where ideas and suggestions romaccross the world are gathered and where existing products are
continually updated and tested.
In co-operation with the end user, new products are eld tested
beore the nal market launch, thus achieving the best result in
the individual markets.
AVK Bu i lds Long L i fe and Good Economy
in to your F i re F igh t ing Sys tems
Fire Fightingrange includes:
Gate Valves,OS&Y Gate Valves,Hydrants,Post Indicators.
7/29/2019 FilestoreDownload.avk
3/16
A wide range o accessories helps completing the
wide product package rom AVK.
I luck runs out it is crucial that the products can be repaired
quickly and eiciently without any down time. Maintenance
and repair shall be completed without the use o special tools.
Besides repair kits or our hydrants AVK has o a number o
accessories, such as extension spindles, street covers and
dierent stem caps, which supplements and completes our
high quality valves and hydrants.
UL/ULC L is ted and FM Approved
Fire plays a decisive part in our developement ashuman beings. Under control it is invaluable, but
out o control it can be devastating.
Brave iremen risk their lives to extinguish ires. They rely ully
on their equipment to unction perectly when needed. Thereore
it is crucial that the products installed are highly reliable, are easy
to maintain and last a lietime. AVK is a leading suppliers o
high quality hydrants and valves or ire ighting and sprinkler
systems. Our unique design and wide product range is based
on the needs o customers worldwide. We oer a wide range o
high quality valves and hydrants which, along with a series o
accessories, build the optimum solution.
The complete ire ighting package complies with international
standards and consists o hydrants, NRS post indicator valves,
hand wheel operated OS&Y gate valves, post and wall indica-
tors, all UL/ULC listed and FM approved. Furthermore AVK holds
VDS approval or NRS hand wheel operated gate valves.
2
7/29/2019 FilestoreDownload.avk
4/16
Size
Series Number
Description
Application
Main Features
Main Options
Max Working Pressure
Temperature Range
Body Material
Applicable Standards
Product Picture
21/00
AVK Resilient Seat WedgeGate Valve, PN10/16
For use with water andneutral liquids (sewage).
Cap top as standard.Ductile iron wedge, ullyvulcanised with EPDM.
O-ring stem sealsreplaceable underpressure.Fully corrosion resistantconstruction.Fusion bonded epoxycoated.Body bonnet boltssealed with hot melt.Bosses or sampling orby-passing.
DN50-400mm
Handwheel.Electric actuation.Bevel or spur
gearboxes.Alternate fangedrillings.CTO, CTC.
16 Bar. (1.6 mpa)
-10C to +70C.
Grey Cast IronBS EN 1561 EN-GJL-250.
BS 5163: part 1 & 2 type B.BS EN 1074-1 & 2.BS 5163 : Pt 1 (BS EN 558-1).BS EN 1092-2.WIS 4-52-01 Class B.
Gate Valves
25/46
AVK OS&Y Rising StemGate Valve, PN16
For use with water andneutral liquids (sewage).
Fully rubber coatedwedge.Clear bore.
Low torque operation.O-ring stem sealsexchangeable underpressure.UL-Listed, FM-approved.Rising stem allows.
DN65-300mm
Groove ends, 250PS.Low zinc bronze stemmaterial.
Drilling to ISO 7005-2(EN 1092-2:1997,DIN2501).Clockwise to close,clockwise to open.
16 Bar. (1.6 mpa)
-10C to +70C.
DN65-250: Grey Cast Iron,DN300: Ductile Iron.
AWWA C509 (OS&Y)
25/46
AVK Post Indicator GateValve, PN16
For use with water andneutral liquids (sewage).
Fully rubber coatedwedge.UL Listed, FM Approved.
ULC Listed, NSF-61(audited by UL).Clear bore.Low torque operation.O-ring stem steamsexchangeable underpressure.
DN100-300mm
Bonnet Bolts Optiona): Stainless Steel- A2 - Grade 304 sealed
with hot meltGland Bolts Optiona): Stainless Steel- A2 - Grade 304Clockwise to close,clockwise to open.
16 Bar. (1.6 mpa)
-10C to +70C.
Cast Iron.
AWWA C509 (NRS)
7/29/2019 FilestoreDownload.avk
5/16
29/288
AVK Squat Underground FireHydrant, PN16
For use with water andneutral liquids.
Fully maintainable.Ductile ironconstruction.
2 London roundthread gunmetal outlet.Exceeds fowrequirements.Corrosion resistantconstruction.Universal drilled inletfange.Inlet is o a proprietarytype.Auto-rost drain valve asstandard.Draining stopper.Low weight design.
DN80mm
Fixed or loose stopper.PN 25 version.Outlet options:
Gunmetal or stainlesssteel to BS 750 roundthread, Instantaneous(morris), Belast, Londonvee thread, Internalscrewed Norwegian,Bayonet (Dublin).
16 Bar. (1.6 mpa)
-10C to +70C.
Ductile IronBS EN 1563 EN-GJS-500-7.
BS 750:2006 Type 2.BS EN 1092-2 PN 10/16.BS 10 Table D/E.WRAS No. 0210153.
29/60
AVK Type 1 UndergroundFire Hydrant, PN16
For use with water andneutral liquids (sewage).
2 London roundthread as standard.In-line installation.
Gunmetal outlet.Large volume bowl.Excellent outlet fow.Corrosion resistantconstruction.
DN80mm
Instantaneous outlet.Bayonet outlet.Belast and Dublin
outlets.Auto-rost valve.Handwheel.
16 Bar. (1.6 mpa)
-10oC to +70oC
Grey IronBS EN 1561 ENG-GJL-250.
BS 750 1.BS EN 1092-2.WIS 4-52-01 Class B.
19/989
AVK Swept PatternUnderground Fire Hydrant,
PN16
For use with water andneutral liquids (sewage).
2 London roundthread.Fixed stopper.
Ductile iron body.Gunmetal Outlet.High security,lightweight design.Corrosion resistantconstruction.Introduction andretrieval o swabs.Universal drilled inletfange BS EN 1092-2:1997, BS 10 D/E.
DN80mm
Instantaneous outlet.Bayonet outlet.Belast and Dublin
outlets.Auto-rost valve.
16 Bar. (1.6 mpa)
-10C to +70C.
Ductile IronBS EN 1563 EN-GJS-500-7.
BS 750 Type 2.BS EN 1092-2.WIS 4-52-01 B.
Hydrants
34
AVK Indicator Post/Wall PostFor Gate Valves, PN16
For use with water andneutral liquids (sewage).
Fusion bonded epoxycoating.Easily readable open/
close marking.Easy to install.Designed to t postindicator gate valves.
DN100-300mm
Bolting materialsa) Stainless steel- A2 - Grade 304.
b) Stainless steel- A4 - Grade 316.Stem lengths to variousbury depths.
16 Bar. (1.6 mpa)
-10oC to +70oC
Ductile Iron
UL 789.FM class number 1110.
Post Indicators
4
7/29/2019 FilestoreDownload.avk
6/16
Dry bar re l hydrants
Ser i es 27 a nd Se r i es 24
Series 27/00 dry barrel ire hydrant is primarilydesigned or rost areas, where the water main is
located below ground rost zone.
The series 27/00 dry barrel hydrant has two drain outlets located
just above the water main level. The main valve disc is designed
with the purpose o lushing the drain channels or soil and
other impurities during opening. These impurities could lead to
damage o the main valve disk. Ater turning the operation key 2
to 3 times the drain will stop lushing and the barrel will be illed
with water, which will low directly into the hoses and pumper
hose or whatever is connected. Furthermore when the hydrant is
closed ater service the barrel will drain the water through the
drain holes in the base. Thereore it is important to make sure
that the base is surrounded by gravel allowing the hydrant to
drain and lush without washing o the soil. I not, this could
result in undermining o the pavement.
Series 24 wet barrel ire hydrant is designed or
non rost areas.
The series 24 wet barrel hydrant is designed with the shut-
o device directly at the outlow nozzle or hose or pumper
connection. This means that the hydrant is constantly illed with
water and thus under pressure.
The hydrant is mounted directly on the water main, giving ull
water pressure instantaniously when needed.
Only ater 1/8 turns on the stem the water starts to low, and
ater 12 turns the ull low capacity can be held against the ire.
The hydrant is not or use where the temperature may come
below 0C, due to the risk o rost bursting.
In order to service and maintain the hydrant, we
recommend installing an isolating gate valve on the
upstream side.
7/29/2019 FilestoreDownload.avk
7/16
AVK dry or wet barrel ire hydrants meet or exceedAWWA C-502 and are all UL/ULC listed and FM
approved. Both types o ire hydrants are designed
or high perormance, easy repair and minimum end
user costs or labor and inventory.
Series 27
Series 27 are available in a modern or nostalgic design. All the
AVK hydrants oer a numerous eatures including:
Hydrant serviceable under pressure
Light-weight, inexpensive hydrant
tools available
Ductile iron nozzle section, barrel
section and base
High pressure rating - 17.2 bar
(250 PSI)
Electrostatically applied polyester
coating
360 degree nozzle section rotation
possible
Removable nozzles secured with
external stainless steel allen screw
Travel stop nut in the nozzle section
or additional saety
Pumper nozzle can be changed rom
4" - 41/2"
Nozzles available in any thread
coniguration
Traic lange designed or easy repair
Stainless steel traic coupling
designed or longer operational lie
and high corrosion resistance
Extensions available in lengths rom
6" - 60", bury depths 2' - 13'
Patented AVK main valve design
-1 piece replaces up to 13 pieces
Ductile iron core ully encapsulated
with rubber. Completely corrosion
resistant (stop pins o stainless steel)
51/4" valve opening or high low rating
360 degree all bronze drain channel
Inlet shoe can be easily changed - available in most
conigurations (MJ, FL, PO)
Series 84/60
AVK Dry Bar re l F i re Hydrants a re
Des igned fo r H igh Per formance
The series 84/60 monitor hydrant is particularly made or
ire ighting in the chemical and petro-chemical industry, or
reineries, tank arms, and airports where large quantities o
explosive, lammable liquids are handled and thereby constitute
a risk.
The hydrant is supplied with two 2 1/2 hose nozzles and one
4 pumper nozzle. The nozzles are supplied with
the patented Easy-open system that makes
an easy and ast opening o the
nozzle possible - even at high
pressure.
Horizontally the hydrant turns 360
continuously variable, and vertically the
monitor can be adjusted rom 45 to 70
- also continuously variable.
The Monitors HH365 and HH366 are
both PN 16. They have a capacity o
2000 respectively 3000 litres/hour andare suitable or both water and oam.
The capacity o the spray nozzle is
adjustable rom 1100 to 3000 litres/hour at 8 bar.
Furthermore, the monitor can be supplied with a
sel-priming oam pipe, and the oam blend can be
continuously variable adjusted rom 2-6%.
Maintenance/repair o the hydrant can be made on location.
The well-known ball shut-o principal allows replacement o
the inner parts o the hydrant under ull pressure without using
special tools. In this way, the hydrant does not have to be
isolated rom the ring main. The spindle rod is made o stainless
steel, and the plug is made o polyamide GTW synthetic elastomer.
6
7/29/2019 FilestoreDownload.avk
8/16
Post I nd ica tors
Post or wall indicators are mounted end to end withthe extension spindel connecting the valve.
It is mounted in places where direct access is
impossible. It could be gate valves mounted on
a water ring main in a actory area, such as oil rei-
neries, chemical plants or airports.
The post indicator indicates i the mating valve is in open or
closed position. According to government regulations it must
be easy or iremen to see i the valve is open or closed, even at
a long distance. The post indicator signs OPEN AND SHUT are
mounted on the target according to clear locations and according
to valve size.
7/29/2019 FilestoreDownload.avk
9/16
Post I nd ica tor Va l ves
Pcture: MiniMax GmbH
Resili ent seated gate
valves
a publshed test from
Cty of Rosevlle, US, hs
proved tht mpurtes
up to 8.7 mm c be
hdled by Dn 150 mm
vlve wthout y problems.
The sme test hs lso
proved tht the uque
aVK rubber qulty EDK
70 s the oly rubber qu-
lty whch sttly returs
to the orgl
shpe whe the vlve s
opeed g.
The post indicator valves are used or under-groundinstallation in ire ighting systems. The post
indicator lange is incorporated in the top gland
giving a compact design.
The post indicator indicates the position o the wedge, whether
it is open or closed.
The basic valve construction is, like valves or water supply,
characterized by a ully rubber coated wedge, ull and straight
bore, low torque operation and O-ring stem seals exchangeable
under pressure.
The valves are available with langes, mechanical joints or push-on
joint ends in DN 100-300 (4" - 12").
8
7/29/2019 FilestoreDownload.avk
10/16
Series 06/35 - The light weight langed gate valve isvery suitable or use in ire ighting systems as an
isolating gate valve or maintenance purpose.
The pin indicator indicates the wedge position. Micro switches
or remote indication o the wedge in open or closed position
are available as an optional extra.
The basic valve construction is, like valves or water supply,
characterized by a ully rubber coated wedge, ull and straight
bore and 3 independant stem seals.
GGG-50 Face to ace to DIN 3202, F4
DN 50 - 300
VdS-approved
Series 25 and Series 45 - The OS&Y or NRS gate
valves with langes are used in above ground
installations. Due to the rising stem it is easy to
recognize the valve position, open or closed, even
at a distance.
The basic valve design is, like valves or water supply,
characterized by a ully rubber coated wedge, ull and straight
bore, low torque operation and O-ring stem seals exchangeable
under pressure.
DN 65 - 300 (21/2" - 12")
UL-listed, FM-approved
Optional with grooved ends, 250 PS
Standard stem sealing system
for water applications to
AWWA standard.
nBR wper rg
polymd berg wth 2 O-rgs,
echgeble uder pressure
wth the vlve fully opeed.
O-rg protects the tfrctowshers
Optol stem mterl:
Low zc broze
Standard stem sealing system
for water applications to DIN
standard.
nBR wper rg
polymd berg wth 4 O-rgs
EPDM rubber mchette
Gate Va l ves Ser ies 06/35 (D IN ) ,
Ser ies 25 (AWWA) and Ser ies 45 (AWWA)
Pcture: MiniMax GmbH
AVK resilient seated gate valves are designed with
a ully vulcanised rubber wedge - internally and
externally.
With this design no iron parts are exposed to the medium and
the excellent rubber vulcanisation prevents creeping corrosion
underneath the rubber. The rubber is vulcanized onto the wedge
by AVK GUMMI A/S, one o Europe's leading manuacturers o
high technology moulded rubber components.
The high quality o AVK rubber is characterized by:
Smell and taste response characteristics highly suitable or
the ood industry
Very low deormation ensuring optimum sealing
High impact resistance preventing corrosion
Low riction ensuring low closing torques
EPDM rubber or water supply, NBR rubber or gas supply
7/29/2019 FilestoreDownload.avk
11/16
Pcture: MiniMax GmbH
Dry pipe system
for rooms subject to frost hazard
Wet pipe system
for frost-protected rooms
Pump suction tank
Control cabinet
Fire pump
Jockey pumpCompressor unit
Water pressure vessel
Dry pipe valve setWet pipe valve set
Automatic feedmechanism
Town main
Escutcheon
Sprinkler pipework installed visible -upright sprinklers with riserPipework installed abovesuspended ceiling -pendent sprinklers
Townmain
Sprinkler pipework installed visible -upright sprinklers with riser Pipeworks installed abovesuspended ceiling -pendent dry sprinklers
Feeding tank
Manifold
Over-
flow
drain
Test linefor pump
Suction pipe
SPR
INKLER-ALA
RM
SPR
INKLER-ALA
RM
10
7/29/2019 FilestoreDownload.avk
12/16
Other Ava i l ab le Hydrants , Ga te Va l ves
and Ind ica tor Posts fo r F i re F igh t ing
Series 27/00Dry barrel ire hydrant,modern styleBury depth 21/2' - 10'250 PSI, GGG-50UL/ULC listed,FM approved
Inlet options: 4"-6" langed
4"-6" mechanical joint6" push-on
Series 06/35Flanged gate valvewith position indi-catorDN 50-300PN 10 or 16GGG-50VdS approved
Series 45Gate valve with groovedends and rising stemGGG-50Bonnet: GGG-50UL/ULC listed,FM approved
Options: langed ends or
grooved/langedends
Series 25Flanged gate valveor indicator postDN 50-300200 PSIGG-25UL/ULC listed,FM approved
Options: push-on ends or
mechanical jointends
Series 24Wet barrel ire hydrant200 PSIGGG-50UL listedFM approved
Options: 1 x pumper
2 x hose 1 x pumper
1 x hose
Series 27/80Dry barrel ire hydrant,nostalgic styleBury depth 21/2' - 10'250 PSI, GGG-50UL/ULC listed,FM approved
Inlet options: 4"-6" langed
4"-6" mechanical joint6" push-on
Series 25Gate valve withmechanical joint endsor indicator postDN 50-400, 200 PSIGG-25UL/ULC listed,FM approved
Options: lange ends or IPS
push-on ends
1
7/29/2019 FilestoreDownload.avk
13/16
Accesso r ies
for Hydrants and Va l ves
Series 27/70Extension kit or drybarrel hydrants
Series 24/82Break ring repairkit or wet barrelhydrants
Series 27/75Traic section repairkit or dry barrelhydrants
Series 27Tools or dry barrelhydrants
Series 24/80Breakable langeunit or wet barrelhydrants
Micro Switch orseries 06/35
Series 84/60Dry barrelmonitor hydrantAccording to DIN 3222Additional ball shut oat inletDuctile iron,DN 100, PN 16
Series 08AVK Handwheel orSeries 21, 37 & 54Gate ValvesDN80-600
Series 04AVK Stem Cap orSeries 21, 37 & 54Gate ValvesDN100-400
The designs, materials and specications shown are subject to change without notice due to our continuing
programme o product development.
FF231107
12
7/29/2019 FilestoreDownload.avk
14/16
Notes
3
7/29/2019 FilestoreDownload.avk
15/16
Notes
14
7/29/2019 FilestoreDownload.avk
16/16
A V K U K LT D
AVK UK LTD
Northampton Ofce, 8 Rushmills,
Northampton,NN4 7YB, England, UK.
Tel.: +44 (0) 1604 601188
Fax.: +44 (0) 1604 604818
www.avkuk.co.uk
Chesterfeld Ofce, Colliery Close,
Ireland Ind. Est., Staveley, Chestereld,S43 3FH, England, UK.
Tel.: +44 (0) 1246 479100
Fax.: +44 (0) 1246 479200