+ All Categories
Home > Documents > Fills cracks and seals out moisture. Can be molded …...For optimal exposure hold the UV LED...

Fills cracks and seals out moisture. Can be molded …...For optimal exposure hold the UV LED...

Date post: 24-Aug-2020
Category:
Upload: others
View: 0 times
Download: 0 times
Share this document with a friend
2
Transcript
Page 1: Fills cracks and seals out moisture. Can be molded …...For optimal exposure hold the UV LED Flashlight approximately 3/4" (2 cm) above the adhesive. The adhesive will start to harden
Page 2: Fills cracks and seals out moisture. Can be molded …...For optimal exposure hold the UV LED Flashlight approximately 3/4" (2 cm) above the adhesive. The adhesive will start to harden

Recommended