22 15/16"

30 1/8"

21 1/16"

32"CABINETWIDTH

0"

6 1/4"

11 1/8"

15 15/16"

12" 9 11/16"

12"

4 7/16"

LEFT SIDE(SERVICE ACCESS) VIEWELECTRICAL

ENCLOSURELOCATION

ALTERNATESUPPLY AIROPENING

1

34 1/16"CABINETLENGTH

FRONT SIDE(O/A INTAKE) VIEW

ALTERNATESUPPLY AIROPENING

28 1/2" 2 7/8"

12"

12" 11"

10"

TOP VIEW

AS SHIPPED SUPPLY AIR OPENING

40 1/2"OVERALL

WIDTH

24 13/16"

24 15/16"

RIGHT SIDE(NON-ACCESS) VIEW

ALTERNATESUPPLY AIROPENING

74 1/8"OVERALLHEIGHT

37 3/16"OVERALLLENGTH

3"

4 7/16"

12"

11" 12"

BACK SIDE(SERVICE ACCESS) VIEW

REMOTE CONDENSER ORWATER CONNECTIONS ANDCONDENSATE STUB LOCATION

ALTERNATESUPPLY AIROPENING

2

3' SERVICE CLEARANCE REQUIRED

NOTES:

UNIT CAN BE FIELD CONFIGURED FOR ANY ALTERNATE SUPPLY AIR LOCATION SHOW1.SEE I/O MANUAL FOR DETAILED INFORMATION TO RELOCATE SUPPLY AIR OPENINGADD AN APROXIMATE 1/2" TO CABINET DIMENSIONS FOR EXTERIOR PANEL FASTENERS2.FILTER RACK AND ALL DOORS ARE REMOVABLE FOR ADDITIONAL CLEARANCE 3.

2

1 SUPPLY LOCATION DIMENSIONS ARE TYPICAL FOR LEFT SIDE AND RIGHT SIDE VIEW

SUPPLY LOCATION DIMENSIONS ARE TYPICALFOR FRONT SIDE AND BACK SIDE VIEW

2 1

FILTERUNIT SIZE

(TONNAGE)4" FILTER

MERV RATING4" FILTER

PART NUMBERNOM

WIDTHNOM

HEIGHT QTY

4-5 11 870-136 25 29 14-5 13 870-135 25 16 2

WATER COOLED AND HEAT PUMPCONDENSER CONNECTIONS

OPTIONAL REMOTE CONDENSERCONNECTIONS

CONDENSATEDRAIN

CONNECTIONWATER LINE SIZE DIMENSIONAL COPPER REFRIGERANT LINE SIZE DIMENSIONAL COPPER PVC

INLET OUTLET DISCHARGE LIQUID RETURN OUTLET1 1/4" 1 1/4" 7/8" 5/8" 1"

TONNAGE CAB WEIGHT4 7105 735

N120 W18485 FREISTADT RDGERMANTOWN, WI 53022Tel: (262) 946-7400Fax: (262) 946-7401

Drawing Number

G807-001

Page Title

Description

QV 4-15,VERTICAL

4-5 TON VERTICAL CABINET

Tolerance UnlessOtherwise Specifed

X.X .125X.XX .060X.XXX .030Angles 1

Date ReleasedDrawn

Scale

Sheet

Rev.

12/23/2019ASV

0NTS

All Dimensions in InchesAll Angles 90

All outside corners 0.125" filletUnless Otherwise Specified

Third Angle Projection

G807-001

Part weight

Desert Aire has a policy of continuous product and quality improvement.Specifications and dimensions aresubject to change without notice.

This drawing and information contained herein are the exclusive property of the

Desert Aire Corporation. Any use detrimentalto the interests of Desert Aire is prohibited.

ALL DIMENSIONS ARE IN INCHESTOLERANCE 1/8"

1/4

27 15/16"

30 1/8"

21 1/16"

35"CABINETWIDTH

0"

9 1/4"

15 1/4"

21 3/16"

22" 6 7/16"

13"

4"

LEFT SIDE(SERVICE ACCESS) VIEW

ELECTRICALENCLOSURE

LOCATION

ALTERNATESUPPLY AIROPENING

1

46 1/16"CABINETLENGTH

FRONT SIDE(O/A INTAKE) VIEW

ALTERNATESUPPLY AIROPENING

2

13"

22"

11"

38 15/16" 3 5/16"

12"

DISCHARGE VIEW

AS SHIPPED SUPPLY AIR OPENING

43 1/2"OVERALL

WIDTH

24 13/16"

29 15/16"

RIGHT SIDE(NON-ACCESS) VIEW

1

79 1/8"OVERALLHEIGHT

49 3/16"OVERALLLENGTH

3"

22" 12"

13"

4"

BACK SIDE(SERVICE ACCESS) VIEW

REMOTE CONDENSER ORWATER CONNECTIONS ANDCONDENSATE STUB LOCATION

ALTERNATESUPPLY AIROPENING

ALTERNATESUPPLY AIROPENING

2

3' SERVICE CLEARANCE REQUIRED

NOTES:

UNIT CAN BE FIELD CONFIGURED FOR ANY ALTERNATE SUPPLY AIR LOCATION SHOW1.SEE I/O MANUAL FOR DETAILED INFORMATION TO RELOCATE SUPPLY AIR OPENINGADD AN APROXIMATE 1/2" TO CABINET DIMENSIONS FOR EXTERIOR PANEL FASTENERS2.FILTER RACK AND ALL DOORS ARE REMOVABLE FOR ADDITIONAL CLEARANCE 3.

SUPPLY LOCATION DIMENSIONS ARE TYPICAL FOR LEFT SIDE AND RIGHT SIDE VIEW

SUPPLY LOCATION DIMENSIONS ARE TYPICALFOR FRONT SIDE AND BACK SIDE VIEW

1

2

FILTERUNIT SIZE

(TONNAGE)4" FILTER

MERV RATING4" FILTER

PART NUMBERNOM

WIDTHNOM

HEIGHT QTY

8-10 11 870-106 20 25 28-10 13 870-134 20 25 2

TONNAGE CAB WEIGHT8 105010 1120

WATER COOLED AND HEAT PUMPCONDENSER CONNECTIONS

OPTIONAL REMOTE CONDENSERCONNECTIONS

CONDENSATEDRAIN

CONNECTIONWATER LINE SIZE DIMENSIONAL COPPER REFRIGERANT LINE SIZE DIMENSIONAL COPPER PVC

INLET OUTLET DISCHARGE LIQUID RETURN OUTLET1 1/4" 1 1/4" 1 1/8" 5/8" 1"

N120 W18485 FREISTADT RDGERMANTOWN, WI 53022Tel: (262) 946-7400Fax: (262) 946-7401

Drawing Number

G807-001

Page Title

Description

QV 4-15,VERTICAL

8-10 TON VERTICAL CABINET

Tolerance UnlessOtherwise Specifed

X.X .125X.XX .060X.XXX .030Angles 1

Date ReleasedDrawn

Scale

Sheet

Rev.

12/23/2019ASV

0NTS

All Dimensions in InchesAll Angles 90

All outside corners 0.125" filletUnless Otherwise Specified

Third Angle Projection

G807-001

Part weight

Desert Aire has a policy of continuous product and quality improvement.Specifications and dimensions aresubject to change without notice.

This drawing and information contained herein are the exclusive property of the

Desert Aire Corporation. Any use detrimentalto the interests of Desert Aire is prohibited.

ALL DIMENSIONS ARE IN INCHESTOLERANCE 1/8"

2/4

27 15/16"

44 3/16"

23 1/4"

35"CABINETWIDTH

0"

9 1/4"

15 1/4"

21 3/16"

LEFT SIDE(SERVICE ACCESS) VIEW

ELECTRICALENCLOSURE

LOCATION

ALTERNATESUPPLY AIROPENING

1

1

2

46 1/16"CABINETLENGTH

72 1/8"

23 1/4"

FRONT SIDE(O/A INTAKE) VIEW

4

ALTERNATESUPPLY AIROPENING

13"

24"

11"

38 15/16" 4 1/8"

11"

DISCHARGE VIEW

AS SHIPPED SUPPLY AIR OPENING

43 1/2"OVERALL

WIDTH

39 1/2"

29 7/8"

24" 5 3/8"

5"

13"

RIGHT SIDE(NON-ACCESS) VIEW

ALTERNATESUPPLY AIROPENING

95 3/8"OVERALLHEIGHT

49 3/16"OVERALLLENGTH

3"

24" 11"

5"

13"

BACK SIDE(SERVICE ACCESS) VIEW

REMOTE CONDENSER ORWATER CONNECTIONS ANDCONDENSATE STUB LOCATION

ALTERNATESUPPLY AIROPENING

SHOWN AS SHIPPED

FAN BOXSECTION

3' SERVICE CLEARANCE REQUIRED

MAIN UNITSECTION

2

NOTES:

UNIT CAN BE FIELD CONFIGURED FOR AN ALTERNATE SUPPLY AIR LOCATION SHOWN1.SEE I/O MANUAL FOR DETAILED INFORMATION TO RELOCATE SUPPLY AIR OPENINGADD AN APROXIMATE 1/2" TO CABINET DIMENSIONS FOR EXTERIOR PANEL FASTENERS2.FILTER RACK AND ALL DOORS ARE REMOVABLE FOR ADDITIONAL CLEARANCE3.QV15 UNIT IS SHIPPED IN TWO PIECES SEE I/O MANUAL FOR ASSEMBLY INSTRUCTIONS4.QV15 UNIT IS SHOWN ASSEMBLED IN ALL VIEWS UNLESS NOTED5.

QV15 FAN BOX IS SHIPPED SEPARATEAND FIELD INSTALLED

QV15 MAIN UNIT

3

4

3

SUPPLY LOCATION DIMENSIONS ARE TYPICAL FOR LEFT SIDE AND RIGHT SIDE VIEW

SUPPLY LOCATION DIMENSIONS ARE TYPICALFOR FRONT SIDE AND BACK SIDE VIEW

1

2

FILTERUNIT SIZE

(TONNAGE)4" FILTER

MERV RATING4" FILTER

PART NUMBERNOM

WIDTHNOM

HEIGHT QTY

15 11 870-107 20 20 415 13 870-129 20 20 4

WATER COOLED AND HEAT PUMPCONDENSER CONNECTIONS

OPTIONAL REMOTE CONDENSERCONNECTIONS

CONDENSATEDRAIN

CONNECTIONWATER LINE SIZE DIMENSIONAL COPPER REFRIGERANT LINE SIZE DIMENSIONAL COPPER PVC

INLET OUTLET DISCHARGE LIQUID RETURN OUTLET1 1/2" 1 1/2" 1 1/8" 7/8" 1"

TONNAGE CAB WEIGHT15 1560

N120 W18485 FREISTADT RDGERMANTOWN, WI 53022Tel: (262) 946-7400Fax: (262) 946-7401

Drawing Number

G807-001

Page Title

Description

QV 4-15,VERTICAL

15 TON VERTICAL CABINET

Tolerance UnlessOtherwise Specifed

X.X .125X.XX .060X.XXX .030Angles 1

Date ReleasedDrawn

Scale

Sheet

Rev.

12/23/2019ASV

0NTS

All Dimensions in InchesAll Angles 90

All outside corners 0.125" filletUnless Otherwise Specified

Third Angle Projection

G807-001

Part weight

Desert Aire has a policy of continuous product and quality improvement.Specifications and dimensions aresubject to change without notice.

This drawing and information contained herein are the exclusive property of the

Desert Aire Corporation. Any use detrimentalto the interests of Desert Aire is prohibited.

ALL DIMENSIONS ARE IN INCHESTOLERANCE 1/8"

3/4

DW

LEFT SIDE(SERVICE ACCESS) VIEW

1

30"

9 3/16"

DISCHARGE VIEW

1

DL

DH EH

FRONT SIDE(O/A INTAKE) VIEW

1

1

FACTORY INSTALL ON RIGHT HAND SIDE IF SPACE ALLOWS

1HEATER IS FACTORY SUPPLIED ACCESSORYFIELD INSTALLED

DUCT HEATER OPTION VIEWS DISCONNECT OPTION VIEW

NOTES:

DISCONNECT LOCATED AS SHOWN OR FACTORY SUPPLIED AND FIELD INSTALLED1.

NOTES:

DUCT HEATER MUST BE INSTALLED IN AIRFLOW1.ORIENTATION ORDEREDCONTACT FACTORY FOR NEW HEATER IF2.CHANGE TO SUPPLY ORIENTATION IS DESIRED

N120 W18485 FREISTADT RDGERMANTOWN, WI 53022Tel: (262) 946-7400Fax: (262) 946-7401

Drawing Number

G807-001

Page Title

Description

QV 4-15,VERTICAL

OPTIONS

Tolerance UnlessOtherwise Specifed

X.X .125X.XX .060X.XXX .030Angles 1

Date ReleasedDrawn

Scale

Sheet

Rev.

12/23/2019ASV

0NTS

All Dimensions in InchesAll Angles 90

All outside corners 0.125" filletUnless Otherwise Specified

Third Angle Projection

G807-001

Part weight

Desert Aire has a policy of continuous product and quality improvement.Specifications and dimensions aresubject to change without notice.

This drawing and information contained herein are the exclusive property of the

Desert Aire Corporation. Any use detrimentalto the interests of Desert Aire is prohibited.

ALL DIMENSIONS ARE IN INCHESTOLERANCE 1/8"

4/4