FILTER HOUSINGS 1 -...

1

2

3

4

5

6

7

8

9

10PRICE LIST

SYSTEMS INSTALLATIONINSTRUCTIONS

GENERAL INFORMATION

ACCESSORIES & SPARES

SEDIMENT CARTRIDGES

FILTER HOUSINGS

FILTRATION SYSTEMS

SPECIALTY CARTRIDGES

EMPTY CANISTERS

CARBON CARTRIDGES

Gierke Pumps & IrrigationABN: 33 705 340 49928 Cox Street Toowoomba Qld 4350Tel: 07 4634 3331 / Mob: 0427 873 890

FILTER HOUSINGS

3/4” Blue Double O RingStandard Diameter

PolypropyleneFilter Bag Vessel (Pentek)

PVC Cluster Filter Housing

1” - 1½” Blue Double O RingLarge Diameter

PolypropyleneFilter Bag (Pentek)

PolypropyleneFilter Bag

Stainless Steel Cluster Housing

1/4” White Double O RingStandard Diameter

1/2” WhiteStandard Diameter

PVC Bag Filter Housing

Gierke Pumps & IrrigationPh 07 46343331Fax 07 46343840Email; [email protected]

The Melt Blown Sediment Removal Filter combines innovative Graded Depth Filter Technology and HighSediment Loading capabilities while still remaining cost effective with proven excellent filtration. Melt BlownFilters are ideal for esidential and light commercial water filtration where 10, 20, 30 & 40 inch filter housingsare used. Melt Blown Filters are competitively priced without compromising the quality for which GE WaterTechnologies is known.

General Specifications

· Micron Ratings (Nominal): 1, 5, 10 & 20· Lengths: 250mm (9⅞”) 508mm (20”)

762mm (30”) 1016mm (40”)· Outside Diameter: 64mm (2½”)· Inside Diameter: 25mm (1”)· Temperature Ranges: 0.5°C - 52°C

(33°F - 125°F)NOTE:Recommended cartridge change is ata maximum increased pressuredifferential of: 69 kPa (10 psi)

Features and Benefits· Price Competitive· Graded Density for High Sediment Loading· Excellent Filtering Performance· Fewer Cartridge Changes, which translates

into Money Saved· Pure Polypropylene Construction· Individually Wrapped and Sealed

Typical Applications· Single Tap· Whole House· Commercial· Light Industrial· RO Pre-treatment· Sea Water

Sediment Spun Polypropylene - Standard Diameter(GE Water Brand)

Flow Performance*Based on10” length filter in clean water

Series: WCMBL

WE RESERVE THE RIGHT TO CHANGE ANY DESIGN, SPECIFICATIONS AND PERFORMANCE FIGURES WITHOUT NOTICE AND WITHOUT INCURRING A NY OBLIGATION FROM SUCH CHANGES WCMBL 0309

Warning:For drinking water applications, do not usewater that is microbiologically unsafe or ofunknown quality without adequate disinfection.

Model No.

10” 20” 30” 40”WCMBL10S01 WCMBL20S01 WCMBL30S01 WCMBL40S01WCMBL10S05 WCMBL20S05 WCMBL30S05 WCMBL40S05WCMBL10S10 WCMBL20S10 WCMBL30S10 WCMBL40S10WCMBL10S20 WCMBL20S20 WCMBL30S20 WCMBL40S20

MB

L S

edim

ent

Hig

h ef

ficie

ncy

Ple

ated

Sed

imen

t


Model No. 10”

WCSP10S0.35

The Harmsco Pleated cartridge is made from an exclusive blend of Polyester- plusTM filter media, specially madefor sub-micron filtration. This unique fiber will not shrink, delaminate or migrate. End caps are Plastisol (PVC).Center cores are ABS. All materials are FDA accepted, and may be used for potable water and liquid foodapplications.

Typical Applications� Domestic� Rural� Commercial� Food & Beverages


� Micron Ratings (Nominal): 0.35� Lengths: 248mm (9¾”)� Outside Diameter: 70mm (2¾”)� Inside Diameter: 27mm (1⅛”)� Filter Area Approximately: 0.56m2 (6 ft2)� Temperature Ranges: 4.4°C - 60°C

(40°F - 140°F)NOTE:Recommended cartridge change is at amaximum increased pressuredifferential of: 69 kPa (10 psi)

The Harmsco cartridge has up to 50% more surface area than conventional pleated cartridges. The media is pleatedto maximize dirt-holding capacity and extend the time period between changes. Due to the sub-micron rating thiscartridge is suitable for fine sediment removal and can also be used for Cyst reduction. This cartridge fits moststandard 10” housings.

Sediment Pleated - Standard Diameter


Series: WCSP.35

Features and Benefits

� Price Competitive� Superior Filter Surface Area� Maximized Dirt Holding Capacity� Excellent Filtering Performance� Low Pressure Loss� Individually Wrapped and Sealed

(Harmsco Brand)

Non

-Was

habl

e

Note: Watermart recommends not toclean the cartridge due to thesub-micron rating.

WE RESERVE THE RIGHT TO CHANGE ANY DESIGN, SPECIFICATIONS AND PERFORMANCE FIGURES WITHOUT NOTICE AND WITHOUT INCURRING ANY OBLIGATION FROM SUCH CHANGES WCSP.35 0309

The “R Series” cartridges are manufactured from a durable, non-woven and reusable polyester fabric that is suitable fora wide range of filtration uses. The media is pleated around a polypropylene core for added strength, and the endsare immersed in a thermo-setting vinyl plastisol. Embedding and sealing each end of the pleat in this fashioncompletely fuses all the components together.

The media is pleated to maximize its dirt-holding capacity and to extend the time period between changes or cleaning.The “R Series” cartridges are resistant to both bacteria and chemical attack making them suitable for a variety ofResidential, Commercial and Industrial applications.

Sediment Pleated Washable - Standard Diameter (PENTEK Brand)


WE RESERVE THE RIGHT TO CHANGE ANY DESIGN, SPECIFICATIONS AND PERFORMANCE FIGURES WITHOUT NOTICE AND WITHOUT INCURRING A


· Micron Ratings (Nominal): 30 & 50· Lengths: 248mm (9¾”)· Outside Diameter: 67mm (2⅝”)· Inside Diameter: 28mm (1⅛”)· Filter Area Approximately: 0.37m2 (4 ft2)· Temperature Ranges: 4.4°C - 52°C

(40°F - 125°F)NOTE:Recommended cartridge clean or changeis at a maximum increased pressuredifferential of: 69 kPa (10 psi)



� Price Competitive� Bacteria and Chemical Resistant� Maximized Dirt Holding Capacity� Reusable Cartridge, which translates

into� Money Saved� Excellent Filtering Performance

Model No.

10”

WCSPR10S30 WCSPR10S50

NY OBLIGATION FROM SUCH CHANGES WCSPR 0309

Series: WCSPR

Materials of Construction

� Filter Media: Non-Woven Polyester� End Caps: Vinyl Plastisol� Core: Polypropylene

Typical Applications� Domestic� Rural� Commercial� Light Industrial

Ple

ated

Sed

imen

t

The Pleated Filter Cartridge is designed to supply a high flow rate with minimal pressure loss while maintaininga high quality of filtration. This is achieved by using a high quality, reusable, polyester, pleated fabric overa polypropylene support core.



· Micron Ratings (Nominal): 1,5,10 & 20· Lengths: 250mm (9⅞”)

508mm (20”)· Outside Diameter: 114mm (4½”)· Inside Diameter: 28mm (1⅛”)· Filter Area Approximately:

250mm: 1.02m2 (11 ft2)508mm: 2.14m2 (23 ft2)

· Temperature Ranges: 4.4°C - 52°C(40°F - 125°F)

NOTE:Recommended cartridge clean or changeis at a maximum increased pressuredifferential of: 69 kPa (10 psi)

The Pleated Filter Cartridge design has been designed for exceptional sediment loading capacity with the abilityto be rinsed and reused in most applications thus extending the usable life of the cartridge. They are well suitedfor sediment removal in low pressure applications and in general Domestic, Rural, Commercial and light Industrialuses.

Sediment Pleated Washable - Large Diameter

Features and Benefits� Price Competitive� Higher Flow with Lower Pressure Loss� Exceptional Dirt Hold Capacity� Reusable Cartridge, which translates into

Money Saved� Excellent Filtering Performance� Individually Wrapped and Sealed

Series: WCSPL

Ple

ated

Sed

imen

t


Model No.10” 20”

WCSP10L01 WCSP20L01WCSP10L05 WCSP20L05WCSP10L10 WCSP20L10WCSP10L20 WCSP20L20

WE RESERVE THE RIGHT TO CHANGE ANY DESIGN, SPECIFICATIONS AND PERFORMANCE FIGURES WITHOUT NOTICE AND WITHOUT INCURRING ANY OBLIGATION FROM SUCH CHANGES WCSPL 0309


Ple

ated

Sed

imen

t


Model No.

10”

WCSPR10L30 WCSPR10L50

The “R Series” cartridges are manufactured from a durable, non-woven and reusable polyester fabric that is suitablefor a wide range of filtration uses. The media is pleated around a polypropylene core for added strength, and theends are immersed in a thermo-setting vinyl plastisol. Embedding and sealing each end of the pleat in this fashioncompletely fuses all the components together.

WE RESERVE THE RIGHT TO CHANGE ANY DESIGN, SPECIFICATIONS AND PERFORMANCE FIGURES WITHOUT NOTICE AND WITHOUT INCURRING ANY OBLIGATION FROM SUCH CHANGES WCSPRL 0309



· Micron Ratings (Nominal): 30 & 50· Lengths: 248mm (9¾”)· Outside Diameter: 114mm (4½”)· Inside Diameter: 28mm (1⅛”)· Filter Area Approximately: 1.48m2 (16 ft2)· Temperature Ranges: 4.4°C - 52°C

(40°F - 125°F)NOTE:Recommended cartridge clean or changeis at a maximum increased pressuredifferential of: 69 kPa (10 psi)

The media is pleated to maximize its dirt-holding capacity and to extend the time period between changes or cleaning.The “R Series” cartridges are resistant to both bacteria and chemical attack making them suitable for a variety ofresidential, commercial and industrial applications.


Series: WCSPRL

Features and Benefits� Price Competitive� Durable Polyester Media is Chemical and� Bacteria Resistant� Maximized Dirt Holding Capacity� Reusable Cartridge, which translates into

Money Saved� Excellent Filtering Performance� Individually Wrapped and Sealed

Materials of Construction

· Filter Media: Non-Woven Polyester· End Caps: Vinyl Plastisol· Core: Polypropylene

Sediment Pleated Washable - Large Diameter(PENTEK Brand)

Sediment String Wound - Standard Diameter

Stri

ngW

ound

Sed

imen

t

The String Wound Filter Cartridge is designed to meet the most demanding filtration duties. They offer acompact, easily installed and maintained filtration system for the removal of particulate from liquid. They arean economical solution for the reduction of fine sediment including sand, silt, rust and scale particles indomestic and small commercial applications.


· Micron Ratings (Nominal): 1, 5, 10, 25 & 50· Lengths: 250mm (9⅞” )· Outside Diameter: 60mm (2¼”)· Inside Diameter: 28mm (1⅛”)· Temperature Ranges: 4.4°C - 70°C


The string roving is made from cotton which is wound over a slotted polypropylenecore for extra strength. The roving is wound in a precise pattern around the core providinga greater surface area. The result is a filter with a high dirt loading capacity and minimalpressure drop. The String Wound Filter cartridge has been on the market for many yearsand has a proven record of consistent performance.

W E RESERVE THE RIGHT TO CHANGE ANY DESIGN, SPECIFICATIONS AND PERFORMANCE FIGURES WITHOUT NOTICE AND WITHOUT INCURRING ANY OBLIGATION FROM SUCH CHANGES WCSW 0309

Features and Benefits� Highly Price Competitive� High Dirt Holding Capacity� Excellent Filtering Performance� Individually Wrapped and Sealed

Typical Applications� Domestic� Commercial� Light Industrial



Model No.

10”WCSW10S01 WCSW10S25WCSW10S05 WCSW10S50WCSW10S10

Series: WCSW

Stri

ngW

ound

Sed

imen

t


· Micron Ratings (Nominal): 1, 5, 10 and 20· Lengths: 250mm (9⅞” )

508mm (20”)· Outside Diameter: 114mm (4½”)· Inside Diameter: 28mm (1⅛”)· Temperature Ranges: 4.4°C - 70°C


The string roving is made from cotton which is wound over a slotted polypropylene core forextra strength. The roving is wound in a precise pattern around the core providing a greatersurface area. The result is a filter with a high dirt loading capacity and minimal pressure drop.The String Wound Filter cartridge has been on the market for many years and has a provenrecord of consistent performance.

Features and Benefits� Price Competitive� Large Diameter, Higher Loading Capacity� Wide Range of Applications� Proven Filtering Performance� Individually Wrapped and Sealed

Typical Applications� Domestic� Commercial� Light Industrial� Dilute Acids� Potable Liquids



Model No.

10” 20”WCSW10L01 WCSW20L01WCSW10L05 WCSW20L05WCSW10L10 WCSW20L10WCSW10L20 WCSW20L20

Series: WCSWL

The String Wound Filter Cartridge is designed to meet the most demanding filtration duties. They offer a compact, easilyinstalled and maintained filtration system for the removal of particulate from liquid. They are an economical solutionfor the reduction of fine sediment including sand, silt, rust and scale particles in domestic and small commercial applications.

Sediment String Wound - Large Diameter

WE RESERVE THE RIGHT TO CHANGE ANY DESIGN, SPECIFICATIONS AND PERFORMANCE FIGURES WITHOUT NOTICE AND WITHOUT INCURRING ANY OBLIGATION FROM SUCH CHANGES WCSWL 0309

Filte

r Bag

WE RESERVE THE RIGHT TO CHANGE ANY DESIGN, SPECIFICATIONS AND PERFORMANCE FIGURES WITHOUT NOTICE AND WITHOUT INCURRING ANY OBLIGATION FROM SUCH CHANGES WBP20FB 0309

Warning:For drinking water applications, do not use water that ismicrobiologically unsafe or of unknown quality withoutadequate disinfection.

Model No.

WBP20FB01 WBP20FB25WBP20FB05 WBP20FB50WBP20FB10 WBP20FB100


� Micron Ratings (Nominal): 1, 5, 10, 25, 50 & 100

� Length: 457mm (18”)� Diameter: 102mm (4”)� Temperature Ranges: 4.4°C - 93°C

(bags only) (40°F - 200°F)(Refer to Filter Bag Vessel rating)

· Filter Media: Glazed Polypropylene FeltNOTE:Recommended Filter Bag change or clean is ata maximum increased pressuredifferential of: 69 kPa (10 psi)

Flow Performance*Based on Viscosity of 1CPS @ 25°C (77°F)

NOTE: For Chemical Compatibility please refer to a Chemical Compatibility Chart prior to use.

Suitable for Pentek Filter Bag Vessel - WH20FBV15

Polypropylene Filter Bag

The BP Series (Polypropylene Felt) filter bags are manufactured from felt because of it’s high solids loadingcapabilities in comparison to similar mesh fabrics. The media is created by needle-punching two (2) layersof synthetic fibres together in a supporting scrim.

(PENTEK Brand)

Series: WBP20FB

· Thermally welded unique design results in consistent filtration efficiencies· Semi-Ridged cylindrical design is easily crushed and incinerated· Higher productivity from faster bag “change-outs”

A glazed finish, created by melting the outermost surface fibres, is used to produce a bond that reducesthe possibility of media migration. Polypropylene bags are compatible with a broad range of corrosivefluids including organic solvents, oils, acids, alkalis and micro-organisms.


Poly

prop

yl

Filte

r Bag

Pol

ypro

pyle

ne

Polypropylene Filter BagThe WPP Series (Polypropylene Felt) filter bags are manufactured from felt because of it’s high solids loadingcapabilities in comparison to similar mesh fabrics. The Filter Bags are manufactured in an ISO9001 certifiedfactory and are a Nominal micron rating ranging from, 0.5 micron to 200 micron

� Thermally welded design results in consistent filtration efficiencies� Semi-Ridged cylindrical design is easily crushed and incinerated� Higher productivity from faster bag “change-outs”� Less Down Time� No Water Wastage

A glazed finish, created by melting the outermost surface fibres, is used to produce a bond that reducesthe possibility of media migration. Polypropylene bags are compatible with a broad range of corrosivefluids including organic solvents, oils, acids, alkalis and micro-organisms.


WE RESERVE THE RIGHT TO CHANGE ANY DESIGN, SPECIFICATIONS AND PERFORMANCE FIGURES WITHOUT NOTICE AND WITHOUT INCURRING ANY OBLIGATION FROM SUCH CHANGES WPPFB 0309

Warning:For drinking water applications, do not use water that ismicrobiologically unsafe or of unknown quality withoutadequate disinfection.

Model No.

WPP20FB WPP40FBWPP20FB0.5 WPP20FB50 WPP40FB0.5 WPP40FB50WPP20FB01 WPP20FB75 WPP40FB01 WPP40FB75WPP20FB05 WPP20FB100 WPP40FB05 WPP40FB100WPP20FB10 WPP20FB150 WPP40FB10 WPP40FB150WPP20FB25 WPP20FB200 WPP40FB25 WPP40FB200

General SpecificationsMicron Ratings (Nominal): 0.5, 1, 5, 10,25, 50, 75, 100, 150and 200.

· Length: WPP20FB WPP40FB 419mm(16½”) 813mm (32”)

· Diameter: 178mm (7”) 178mm (7”)

· Flow Rate: 20 m³/hr 40 m³/hr(Maximum)

· Temperature Ranges: 4.4°C - 93°C(bags only) (40°F - 200°F) (Refer toFilter Bag Vessel rating when using)

· Filter Media: Polypropylene FeltNOTE:Recommended Filter Bag change or clean is at amaximum increased pressure

differential of: 69 kPa (10 psi)

Flow Performance*Based on Viscosity of 1CPS @ 25°C (77°F)

NOTE: For Chemical Compatibility please refer to aChemical Compatibility Chart prior to use.

*Approximate figures, based on clean water

Suitable for Bag Filter Housing - WHPVCBF

Series: WPPFB

Filte

r Hou

sing


� Port Size : ½” BSPDimensions�Width: 118mm (4⅝”)� Height: 312mm (12¼”)

� Temperature Ranges: 4.4°C - 43°C (40°F - 110°F)� Operating Pressure: 690 kPa (100 psi) (Maximum)� Recommended Flow Rate: 30 Lpm(Maximum)

NOTE:Flow rate will vary depending on type of filtercartridge installed.(Filter Cartridge NOT included)

Typical Applications

WE RESERVE THE RIGHT TO CHANGE ANY DESIGN, SPECIFICATIONS AND PERFORMANCE FIGURES WITHOUT NOTICE AND WITHOUT INCURRING ANY OBLIGATION FROM SUCH CHANGES WH10SW12 0309

Model No.

10”

WH10SW12WH10SW12K (Kit)

1/2”

Whi

te

The Housing Cap is moulded with mounting bosses to accommodate a Wall MountingBracket. Unlike clear housings the White Polypropylene is opaque preventing lightfrom penetrating which causes microbiological growth insidethe filter housing.

� Point of Use (POU)� Undersink� Drinking Fountains� Ice Machines� Beverage Dispensers

� Recreation Vehicles� Marine� Domestic� Commercial� Light Industrial

Series: WH10SW12


Optional ExtrasA. Wrench P/No. WAW10HSB. Mounting Bracket P/No. WABS10SW

B

NOTE: Housings are also sold as Kits which includes;Housing, Bracket, Wrench and Box.

The 10” White Standard Diameter Filter Housing is manufactured from Polypropylenewhich has excellent chemical resistance enabling it to be usedin a variety of applications within the Domestic, Rural, Commercial and Light Industrialfields.

Filter Housing - Standard Diameter

A

The Blue Large Standard Diameter Filter Housing is manufactured from polypropylene which has excellentchemical resistance enabling it to be used in a variety of applications within the Domestic, Rural, Commercialand Light Industrial fields. The Filter Housing has a Double “O” Ring Seal builtinto the Housing Bowl providing it with added protection against leakage.


· Port Size : 1” & 1½” BSP· Dimensions 10” 20”

Width: 184mm (7¼”) 184mm (7¼”)Height: 350mm (13¾”) 610 mm (24”)

· Temperature Ranges: 4.4°C - 43°C(40°F - 110°F)

· Operating Pressure: 10” 690 kPa (100 psi)(Maximum) 20” 620 kPa (90 psi)

· Recommended Flow Rate: 10” 90 Lpm(Maximum) 20” 1 8 0Lpm

NOTE: Flow rate will vary depending on type offilter cartridge installed. (FilterCartridge NOT included)


WE RESERVE THE RIGHT TO CHANGE ANY DESIGN, SPECIFICATIONS AND PERFORMANCE FIGURES WITHOUT NOTICE AND WITHOUT INCURRING ANY OBLIGATION FROM SUCH CHANGES WH1020LB 0309

Filter Housing - Large Diameter

Model No.

10” 20”WH10LB10 WH20LB10

WH20LB15Kits

WH10LB10K WH20LB10KWH20LB15K

The Housing Cap has a Pressure Relief Button built in and mounting bosses to accommodate a WallMounting Bracket for easy installation. Unlike clear housings the Blue Polypropylene is opaque preventinglight from penetrating which causes microbiological growth inside the filter housing.

� Point of Use (POU)� Whole of House� Rural� Drip Systems� Micro Sprays

� Aquaculture� Marine� Domestic� Commercial� Light Industrial

Series: WHLB

Warning:For drinking water applications, do not use waterthat is microbiologically unsafe or of unknownquality without adequate disinfection.

Optional ExtrasA. Wrench 10”/20” P/No. WAW1020HLB. Mounting Bracket P/No. WABS1020LW

A

B


Filte

r Hou

sing

1”-1

½” B

lue

We E RESERVE THE RIGHT TO CHANGE ANY DESIGN, SPECIFICATIONS AND PERFORMANCE FIGURES WITHOUT NOTICE AND WITHOUT INCURRING A NY OBLIGATION FROM SUCH CHANGES WH10SB34 0309

Warning:For drinking water applications, do not usewater that is microbiologically unsafe or of unknown quality withoutadequate disinfection.


The Blue Standard Diameter Filter Housing is manufactured from Polypropylene which has excellentchemical resistance enabling it to be used in a variety of applications within the Domestic, Rural, Commercialand ight Industrial fields. The Filter Housing has a Double “O” Ring Seal built into the Housing Bowlproviding it with added protection against leakage.

Filter Housing - Standard Diameter

The Housing Cap has a Pressure Relief Button built in and mounting bosses to accommodate a Wall MountingBracket for easy installation. Unlike clear housings the Blue Polypropylene is opaque preventing lightfrom penetrating which causes microbiological growth inside the filter housing.


Port Size : ¾” BSPDimensions 10” 20” Width: 115mm (4½”) 115mm (4½”)Height: 315mm (12½”) 600 mm (23½)

Temperature Ranges: 4.4°C - 43°C(40°F - 110°F)

· Operating Pressure: 690 kPa (100 psi)(Maximum)

· Recommended Flow Rate: 10” 38 Lpm(Maximum) 20” 76 Lpm

NOTE:Flow rate will vary depending on type offilter cartridge installed. (FilterCartridge NOT included)

� Point of Use (POU)� Whole of House (20” Housing)� Rural� Ice Machines� Beverage Dispensers

Optional ExtrasA. Wrench 10” P/No. WAW10HS

20” P/No. WAW20HSDOB. Mounting Bracket P/No. WAB1020SW

A B Filte

r Hou

sing

3/4”

Blu

e

� Recreation Vehicles� Marine� Domestic� Commercial� Light Industrial

Series: WHSB34


Model No.10” 20”

WH10SB34DO WH20SB34DO

KitsWH10SB34DOK WH20SB34DOK

FILTER HOUSINGSModel Description Ctn Qty Price

10" Filter Housing Standard DiameterWH10SW14DO 10" Std Dia. Double O-Ring White Housing 1/4" Bsp 12 $ 13.15WH10SC14 10" Std Dia. Clear Housing 1/4" 12 $ 13.15WH10SW12 10" Std Dia. White Housing 1/2" 12 $ 16.00WH10SCL34 10" Std Dia. Clear Lexen Housing 3/4" 12 $ POAWH10SB34DO 10" Std Dia. Double O-Ring Blue Housing 3/4" Bsp 12 $ 14.05WHV10SW1434 10" Std Dia. White Vortex Housing 1/4" or 3/4" Bsp, Aust Approved 10 $ 28.30

20" Filter Housing Standard DiameterWH20SB34DO 20" Std Dia. Double O-Ring Seal Blue Housing 3/4" Bsp 6 $ 50.00

10" Filter Housing Large DiameterWH10LB10 10" Lge Dia. Double O-Ring Seal Blue Housing 1" Bsp 4 $ 56.25

20" Filter Housing Large DiameterWH20LB10 20" Lge Dia. Double O-Ring Seal Blue Housing 1" Bsp 4 $ 92.50WH20LB15 20" Lge Dia. Double O-Ring Seal Blue Housing 1-1/2" Bsp 4 $ 96.50

10" Filter Housing Standard Diameter Kits (Supplied with Box, Bracket, Wrench)WH10SW14DOK 10" Std Dia. Double O-Ring White Housing Kit, 1/4" Bsp 12 $ 18.95WH10SW12K 10" Std Dia. White Housing Kit, 1/2" 12 $ 21.80

WATERMART HOUSINGS, CARTRIDGES & DRINKING SYSTEMS

10" Std Dia. White Housing Kit, 1/2"WH10SB34DOK 10" Std Dia. Double O-Ring Blue Housing Kit, 3/4" Bsp 12 $ 19.85WHV10SW1434K 10" Std Dia. White Vortex Housing Kit, 1/4" or 3/4" Bsp, Aust Approved 10 $ 38.50

20" Filter Housing Standard Diameter Kit (Supplied with Box, Bracket, Wrench)WH20SB34DOK 20" Std Dia. Double O-Ring Seal Blue Housing Kit, 3/4" Bsp 6 $ 56.30

10" Filter Housing Large Diameter Kit (Supplied with Box, Bracket, Wrench)WH10LB10K 10" Lge Dia. Double O-Ring Seal Blue Housing Kit, 1" Bsp 4 $ 75.65

20" Filter Housing Large Diameter Kits (Supplied with Box, Bracket, Wrench)WH20LB10K 20" Lge Dia. Double O-Ring Seal Blue Housing Kit, 1" Bsp 4 $ 111.90WH20LB15K 20" Lge Dia. Double O-Ring Seal Blue Housing Kit, 1-1/2" Bsp 4 $ 115.90

Stainless Steel HousingsWH10SS34 10" Std Dia. 316 Stainless Steel Housing with 3/4" Port 1 $ POAWH20SS34 20" Std Dia. 316 Stainless Steel Housing with 3/4" Port 1 $ POA

Note: SS Housings listed above include Box, Bracket and Wrench.

Gierke Pumps & IrrigationPh: 07 46343331Fax : 07 46343840Email: [email protected]

Prices subject to change without notice - July 2009GST NOT Included Page 1

Gierke Pumps & IrrigationPh: 07 46343331 Mob: 0427 873 890Fax : 07 46343840Email: [email protected]

BAG FILTER HOUSING (PENTEK)Model Description Ctn Qty Price

Polypropylene Bag Vessel (Pentek)Bag Vessel is supplied with a Spanner, Pressure Gauge & Drain Valve

WH20FBV15 20" Filter Bag Vessel 1-1/2" Bsp In/out 1 $ 375.00

Polypropylene Bag Vessel - Mounting OptionsWABS1020LW Bracket for 10"/20" Housing Lge Dia. 1 $ 13.40WA20FBVHS 20" Filter Bag Vessel Housing Stand 1 $ 50.60

Polypropylene Filter Bags (Pentek)WBP20FB01 20" Filter Bag 01 Micron 10 $ 11.00WBP20FB05 20" Filter Bag 05 Micron 10 $ 11.00WBP20FB10 20" Filter Bag 10 Micron 10 $ 11.00WBP20FB25 20" Filter Bag 25 Micron 10 $ 11.00WBP20FB50 20" Filter Bag 50 Micron 10 $ 11.00WBP20FB100 20" Filter Bag 100 Micron 10 $ 11.00

PVC BAG FILTER HOUSINGSModel Description Ctn Qty Price

PVC Bag Filter HousingsPVC Bag Housings Includes the Spanner. Pressure Gauge Optional.

WHPVC20BF PVC Bag Filter Housing, 20m3/hr, 2" BSP Female Ports 1 $ 590.00WHPVC40BF PVC Bag Filter Housing, 40m3/hr, 2" BSP Female Ports 1 $ 665.00

Note: Maximum Operating Pressure 600KPA for Housings

Polypropylene Filter BagsWPP20FB0.5 Polypropylene Filter Bag (178x418mm), 0.5 Micron 10 $ 16.30WPP20FB01 Polypropylene Filter Bag (178x418mm), 1 Micron 10 $ 16.30WPP20FB05 Polypropylene Filter Bag (178x418mm), 5 Micron 10 $ 16.30WPP20FB10 Polypropylene Filter Bag (178x418mm), 10 Micron 10 $ 16.30WPP20FB25 Polypropylene Filter Bag (178x418mm), 25 Micron 10 $ 16.30WPP20FB50 Polypropylene Filter Bag (178x418mm), 50 Micron 10 $ 16.30WPP20FB100 Polypropylene Filter Bag (178x418mm), 100 Micron 10 $ 16.30WPP20FB150 Polypropylene Filter Bag (178x418mm), 150 Micron 10 $ 16.30WPP20FB200 Polypropylene Filter Bag (178x418mm), 200 Micron 10 $ 16.30

WPP40FB0.5 Polypropylene Filter Bag (178x813mm), 0.5 Micron 10 $ 19.80WPP40FB01 Polypropylene Filter Bag (178x813mm), 1 Micron 10 $ 19.80WPP40FB05 Polypropylene Filter Bag (178x813mm), 5 Micron 10 $ 19.80WPP40FB10 Polypropylene Filter Bag (178x813mm), 10 Micron 10 $ 19.80WPP40FB25 Polypropylene Filter Bag (178x813mm), 25 Micron 10 $ 19.80WPP40FB50 Polypropylene Filter Bag (178x813mm), 50 Micron 10 $ 19.80WPP40FB100 Polypropylene Filter Bag (178x813mm), 100 Micron 10 $ 19.80WPP40FB150 Polypropylene Filter Bag (178x813mm), 150 Micron 10 $ 19.80WPP40FB200 Polypropylene Filter Bag (178x813mm), 200 Micron 10 $ 19.80

PVC Bag Filter Housing AccessoriesWHPVCAS Spanner to suit PVC Housings 1 $ 33.40WHPVCAPG0-100 Pressure Gauge, 0-100PSI, to suit PVC Housings 1 $ 16.00



CLUSTER FILTER HOUSINGS - PVCModel Description Ctn Qty Price

PVC Cluster Filter HousingsPVC Cluster Housings Do Not Include the Spanner or Pressure Gauge.

WHPVCCF10-5 10" PVC 5-Round Cluster Filter Housing, 1-1/2" Union 1 $ 290.00WHPVCCF20-5 20" PVC 5-Round Cluster Filter Housing, 1-1/2" Union 1 $ 380.00WHPVCCF30-5 30" PVC 5-Round Cluster Filter Housing, 2" Union 1 $ 470.00WHPVCCF40-5 40" PVC 5-Round Cluster Filter Housing, 2" Union 1 $ 560.00

Note: Maximum Operating Pressure 600KPA for Housings

PVC Cluster Filter Housing AccessoriesWHPVCAS Spanner to suit PVC Housings 1 $ 33.40WHPVCAPG0-100 Pressure Gauge, 0-100PSI, to suit PVC Housings 1 $ 16.00

CLUSTER FILTER HOUSINGS - STAINLESS STEELModel Description Ctn Qty Price

Stainless Steel Cluster Filter Housings - 304SSWH304SSCF10-7 10" 304SS 7-Round Cluster Filter Housing, 1-1/2" Male Port 1 $ 625.00WH304SSCF20-7 20" 304SS 7-Round Cluster Filter Housing, 1-1/2" Male Port 1 $ 745.00WH304SSCF30-7 30" 304SS 7-Round Cluster Filter Housing, 2" Male Port 1 $ 865.00WH304SSCF40-7 40" 304SS 7-Round Cluster Filter Housing, 2" Male Port 1 $ 1185.00

Stainless Steel Cluster Filter Housings - 316SS


Stainless Steel Cluster Filter Housings - 316SSWH316SSCF10-7 10" 316SS 7-Round Cluster Filter Housing, 1-1/2" Male Port 1 $ 1125.00WH316SSCF20-7 20" 316SS 7-Round Cluster Filter Housing, 1-1/2" Male Port 1 $ 1320.00WH316SSCF30-7 30" 316SS 7-Round Cluster Filter Housing, 2" Male Port 1 $ 1445.00WH316SSCF40-7 40" 316SS 7-Round Cluster Filter Housing, 2" Male Port 1 $ 1810.00

Note: Maximum Operating Pressure 400KPA for Cluster Housings


SEDIMENT CARTRIDGES (GE WATER Brand)Model Description Ctn Qty Price

Sediment Spun Polypropylene Standard Diameter (GE WATER Brand) NOMINAL RATEDWCMBL10S01 10" 1 micron Std Dia. Sediment Spun Graded Density 50 $ 3.45WCMBL10S05 10" 5 micron Std Dia. Sediment Spun Graded Density 50 $ 3.45WCMBL10S10 10" 10 micron Std Dia. Sediment Spun Graded Density 50 $ 3.45WCMBL10S20 10" 20 micron Std Dia. Sediment Spun Graded Density 50 $ 3.45

WCMBL20S01 20" 1 micron Std Dia. Sediment Spun Graded Density 25 $ 6.90WCMBL20S05 20" 5 micron Std Dia. Sediment Spun Graded Density 25 $ 6.90WCMBL20S10 20" 10 micron Std Dia. Sediment Spun Graded Density 25 $ 6.90WCMBL20S20 20" 20 micron Std Dia. Sediment Spun Graded Density 25 $ 6.90



Note: Special Bulk Pricing available upon Request

Sediment Spun Polypropylene Large Diameter (GE WATER Brand) NOMINAL RATEDWCMBB10L01 10" 1 micron Lge Dia. Sediment Spun Graded Density 10 $ 22.10WCMBB10L05 10" 5 micron Lge Dia. Sediment Spun Graded Density 10 $ 21.10WCMBB10L25 10" 25 micron Lge Dia. Sediment Spun Graded Density 10 $ 21.10

WCMBB20L01 20" 1 micron Lge Dia. Sediment Spun Graded Density 5 $ 44.20WCMBB20L05 20" 5 micron Lge Dia. Sediment Spun Graded Density 5 $ 42.20WCMBB20L25 20" 25 micron Lge Dia. Sediment Spun Graded Density 5 $ 42.20

Sediment Melt Blown Standard Diameter (GE WATER Brand) NOMINAL RATEDWCPP10S01 10" 1 micron Std Dia. Sediment Purtrex Plus Graded Density 40 $ 4.50WCPP10S05 10" 5 micron Std Dia. Sediment Purtrex Plus Graded Density 40 $ 4.10WCPP10S10 10" 10 micron Std Dia. Sediment Purtrex Plus Graded Density 40 $ 3.70

WCPP20S01 20" 1 micron Std Dia. Sediment Purtrex Plus Graded Density 20 $ 8.15WCPP20S05 20" 5 micron Std Dia. Sediment Purtrex Plus Graded Density 20 $ 7.80WCPP20S10 20" 10 micron Std Dia. Sediment Purtrex Plus Graded Density 20 $ 7.50



Sediment Melt Blown Standard Diameter (Cyst Removal) (GE WATER Brand) ABSOLUTE RATEDWCMBC10S01A 10" 1 micron Absolute Std Dia. Sediment MB Graded Density 40 $ 17.10WCMBC20S01A 20" 1 micron Absolute Std Dia. Sediment MB Graded Density 20 $ 33.85



SEDIMENT CARTRIDGES Cont.Model Description Ctn Qty Price

Sediment String Wound Standard DiameterWCSW10S01 10" 1 micron Std Dia. Sediment Wound 30 $ 3.85WCSW10S05 10" 5 micron Std Dia. Sediment Wound 30 $ 3.85WCSW10S10 10" 10 micron Std Dia. Sediment Wound 30 $ 3.85WCSW10S25 10" 25 micron Std Dia. Sediment Wound 30 $ 3.85WCSW10S50 10" 50 micron Std Dia. Sediment Wound 30 $ 3.85

Sediment String Wound Large DiameterWCSW10L01 10" 1 micron Lge Dia. Sediment Wound 6 $ 21.10WCSW10L05 10" 5 micron Lge Dia. Sediment Wound 6 $ 21.10WCSW10L10 10" 10 micron Lge Dia. Sediment Wound 6 $ 21.10WCSW10L20 10" 20 micron Lge Dia. Sediment Wound 6 $ 21.10

WCSW20L01 20" 1 micron Lge Dia. Sediment Wound 6 $ 42.10WCSW20L05 20" 5 micron Lge Dia. Sediment Wound 6 $ 42.10WCSW20L10 20" 10 micron Lge Dia. Sediment Wound 6 $ 42.10WCSW20L20 20" 20 micron Lge Dia. Sediment Wound 6 $ 42.10

Sediment Pleated Washable Standard DiameterWCSP10S0.35 10" 0.35 micron Std Dia. Sediment Pleated (Non-Washable) (Harmsco) 24 $ 30.20WCSP10S01 10" 1 micron Std Dia. Sediment Pleated Polyester 24 $ 7.60WCSP10S05 10" 5 micron Std Dia. Sediment Pleated Polyester 24 $ 7.60WCSP10S10 10" 10 micron Std Dia. Sediment Pleated Polyester 24 $ 7.60WCSP10S20 10" 20 micron Std Dia. Sediment Pleated Polyester 24 $ 7.60

WCSPR10S30 10" 30 micron Std Dia. Sediment Pleated Polyester (R30) (Pentek) 24 $ 16.45WCSPR10S50 10" 50 micron Std Dia. Sediment Pleated Polyester (R50) (Pentek) 24 $ 15.65

WCSP20S01 20" 1 micron Std Dia. Sediment Pleated Polyester 15 $ 14.85WCSP20S05 20" 5 micron Std Dia. Sediment Pleated Polyester 15 $ 14.85WCSP20S10 20" 10 micron Strd Dia. Sediment Pleated Polyester 15 $ 14.85WCSP20S20 20" 20 micron Std Dia. Sediment Pleated Polyester 15 $ 14.85

Sediment Pleated Washable Large DiameterWCSP10L01 10" 1 micron Lge Dia. Sediment Pleated Polyester 6 $ 27.15WCSP10L05 10" 5 micron Lge Dia. Sediment Pleated Polyester 6 $ 27.15WCSP10L10 10" 10 micron Lge Dia. Sediment Pleated Polyester 6 $ 27.15WCSP10L20 10" 20 micron Lge Dia. Sediment Pleated Polyester 6 $ 27.15

WCSPR10L30 10" 30 micron Lge Dia. Sediment Pleated Polyester (R30-BB) (Pentek) 8 $ 33.60WCSPR10L50 10" 50 micron Lge Dia. Sediment Pleated Polyester (R50-BB) (Pentek) 8 $ 26.30

WCSP20L01 20" 1 micron Lge Dia. Sediment Pleated Polyester 6 $ 46.00WCSP20L05 20" 5 micron Lge Dia. Sediment Pleated Polyester 6 $ 46.00WCSP20L10 20" 10 micron Lge Dia. Sediment Pleated Polyester 6 $ 46.00WCSP20L20 20" 20 micron Lge Dia. Sediment Pleated Polyester 6 $ 46.00



CARBON CARTRIDGESModel Description Ctn Qty Price

Carbon Cartridge Standard DiameterWCCB10S01 10" 1 micron Std Dia. Carbon Block 20 $ 6.10WCCB10S05 10" 5 micron Std Dia. Carbon Block 20 $ 6.10WCCB10S10 10" 10 micron Std Dia. Carbon Block 20 $ 6.10WCGAC10S10 10" 10 micron Std Dia. Granular Activated Carbon 20 $ 7.60WCCBC10S0.5 10" 0.5 micron Std Dia. CB, Giardia & Crypto (CBC-10) (Pentek) 12 $ 17.00WCCBR210S0.5 10" 0.5 micron Std Dia. CB, Lead,Giardia & Crypto (CBR2-10) (Pentek) 12 $ 23.00WCEPM10S10 10" 10 micron Std Dia. Carbon Briquette (EPM-10) (Pentek) 6 $ 14.00WCNCP10S10 10" 10 micron Std Dia Carbon Pleated Impreg. (NCP-10) (Pentek) 6 $ 17.80WCCEC10S0.2 10" x 2.5" 0.2 micron Ceramikx E.coli Carbon Cartridge (KX Industries) 6 $ 24.50WCCBL10S01A 10" 1 micron Absolute Std Dia. CB / Lead (YLCT-2489) (GE Water) 6 $ 28.00WCQCLCB12 12" Quick Connect Carbon Block w/ Lead/Cyst Reduction, 1 micron (Omnipure) 6 $ 59.00

WCCB20S01 20" 1 micron Std Dia. Carbon Block 15 $ 10.50WCCB20S05 20" 5 micron Std Dia. Carbon Block 15 $ 10.50WCCB20S10 20" 10 micron Std Dia. Carbon Block 15 $ 10.50WCGAC20S10 20" 10 micron Std Dia. Granular Activated Carbon 15 $ 14.00WCCBC20S0.5 20" 0.5 micron Std Dia. CB, Giardia & Crypto (CBC-20) (Pentek) 1 $ 55.00WCEPM20S10 20" 10 micron Std Dia. Carbon Briquette (EPM-20) (Pentek) 1 $ 34.50WCNCP20S10 20" 10 micron Std Dia Carbon Pleated Impreg. (NCP-20) (Pentek) 1 $ 35.00

Carbon Cartridge Large DiameterWCCB10L01 10" 1 micron Lge Dia. Carbon Block 6 $ 26.00WCCB10L05 10" 5 micron Lge Dia. Carbon Block 6 $ 26.00WCCB10L10 10" 10 micron Lge Dia. Carbon Block 6 $ 26.00WCGAC10L10 10" 10 micron Lge Dia. Granular Activated Carbon 6 $ 24.00WCCBC10L0.5 10" 0.5 micron Lge Dia. CB, Giardia & Crypto (CBC-10BB) (Pentek) 1 $ 86.10WCEPM10L10 10" 10 micron Lge Dia. Carbon Briquette (EPM-BB) (Pentek) 1 $ 51.35WCNCP10L10 10" 10 micron Lge Dia Carbon Pleated Impreg. (NCP-10BB) (Pentek) 1 $ 45.70

WCCB20L01 20" 1 micron Lge Dia. Carbon Block 6 $ 51.00WCCB20L05 20" 5 micron Lge Dia. Carbon Block 6 $ 51.00WCCB20L10 20" 10 micron Lge Dia. Carbon Block 6 $ 51.00WCGAC20L10 20" 10 micron Lge Dia. Granular Activated Carbon 6 $ 48.00WCCBC20L0.5 20" 0.5 micron Lge Dia. CB, Giardia & Crypto (CBC-20BB) (Pentek) 1 $ 180.00WCEPM20L10 20" 10 micron Lge Dia. Carbon Briquette (EPM-20BB) (Pentek) 1 $ 90.60WCNCP20L10 20" 10 micron Lge Dia Carbon Pleated Impreg. (NCP-20BB) (Pentek) 1 $ 82.60WCRFC20L25 20" Lge Dia. Radial Flow Carbon Cartridge (RFC20-BB) (Pentek) 1 $ 150.00

In-Line Carbon Filters (Disposable)WCIC10S14 10" x 2" In-Line Carbon 1/4" Bsp (Disposable) 25 $ 8.75WCIC11S14L 11" x 2-1/2" In-Line Carbon 1/4" Bsp (Disposable) 25 $ 14.00WCICS10S14 10" x 2" In-Line Carbon/Scale 1/4" Bsp (Disposable) 24 $ 25.00WCS7206W In-Line GAC Post Filter Carbon Cartridge 2"x6", White 24 $ 19.60

Empty Cartridge Canisters (Refillable)WCECC10S 10" Std Dia Empty Cartridge Canister 20 $ 5.00WCECC20S 20" Std Dia Empty Cartridge Canister 20 $ 10.00

WCECC10L 10" Lge Dia Empty Cartridge Canister 1 $ 16.00WCECC20L 20" Lge Dia Empty Cartridge Canister 1 $ 26.00

WCEICQF14 10" x 2" In-Line Quick Fit 1/4" Bsp Empty Cartridge (Disposable) 6 $ 6.00

Specialty CartridgesWCRFFE20L 20" Lge Dia. Radial Flow Iron Reduction Cartridge (RFFE20-BB) (Pentek) 1 $ 201.00

WCOAC20L 20" Lge Dia Oil Absorbing Cartridge (OAC-20BB) (Pentek) 1 $ 212.00

WCSWHW10S01 10" 1 micron Std Dia. Sediment Wound Hot Water Cartridge 1 $ 20.25WCSWHW20S01 20" 1 micron Std Dia. Sediment Wound Hot Water Cartridge 1 $ 46.00



FILTER SYSTEMSProduct No. Description Ctn Qty Price

Counter TopIncludes 1/4" white housing, carbon briquette cartridge, High Flow diverter valve and adaptor, counter top stand,counter top spout, brass elbows and 1/4" tubing.

WCTFS Counter Top Filter System (Cyst removal) 1 $ 77.20

Single UndersinkIncludes 1/4" white housing, bracket, carbon briquette cartridge, brass ball valve, 350KPA pressure reducingdual check valve, long reach chrome faucet, 1/2" brass tee, wrench, JG fittings, 1/4" tubing and thread seal.

WSUFS Single Undersink Filter System (Cyst removal) 1 $ 153.50

Quick Connect Single UndersinkIncludes 12" lead carbon block cartridge, quick connect valve-in-head assembly, mounting bracket, brass ball valve,350KPA pressure reducing dual check valve, long reach faucet, 1/2" brass tee, JG fittings, 1/4" tubing & thread seal.

WQCUS12 Quick Connect Undersink System, 1/2" (Cyst Removal) 1 $ 223.35

Dual UndersinkIncludes 1/4" white housings, dual bracket, 5 micron sediment, carbon briquette cartridge, brass ball valve,350KPA pressure reducing dual check valve, long reach chrome faucet, 1/2" brass tee, wrench, JG fittings,1/4" tubing and thread seal.

W2SUFS 2 Stage Undersink Water Filter System (Cyst Removal) 1 $ 176.10

FILTER SYSTEMS REPLACEMENT CARTRIDGESProduct No. Description Qty Req.

WCTFSWCCBC10S0.5 10" 0.5 micron Std Dia. CB, Giardia & Crypto (CBC-10) (Pentek) 1

WSUFSWCCBC10S0.5 10" 0.5 micron Std Dia. CB, Giardia & Crypto (CBC-10) (Pentek) 1

WQCUS12WCQCLCB12 12" Quick Connect Carbon Block w/ Lead/Cyst Reduction, 1 micron (Omnipure) 1

W2SUFSWCCBC10S0.5 10" 0.5 micron Std Dia. CB, Giardia & Crypto (CBC-10) (Pentek) 1WCMBL10S05 10" 5 micron Std Dia. Sediment Spun Graded Density 1

UNDERSINK R.O. SYSTEMSProduct No. Description Ctn Qty Price

Watermart R.O. Systemsincludes housings, dual bracket, sediment & carbon cartridges, inline post carbon cartridge, RO membrane,membrane housing, airgap faucet, 3.2gal RO Storage tank, 1/2" brass tee, 500KPA pressure reducing dualcheck valve, brass ball valve, flow restrictor, drain clamp, wrench, JG tubing, JG fittings and thread seal.

W3SWMRO50 3 Stage Wall Mount Reverse Osmosis System 50GPD 1 $ 167.30

W4SROUS36 4 Stage Reverse Osmosis Undersink System 36GPD 1 $ 413.80W4SROUS50 4 Stage Reverse Osmosis Undersink System 50GPD 1 $ 414.80W4SROUS75 4 Stage Reverse Osmosis Undersink System 75GPD 1 $ 417.80W4SROUS100 4 Stage Reverse Osmosis Undersink System 100GPD 1 $ 426.80W4SROUS150 4 Stage Reverse Osmosis Undersink System 150GPD, Low Pressure 1 $ 452.80

Microline R.O. Systemsincludes housings, dual bracket, sediment & carbon cartridges, inline post carbon cartridge, RO membrane,membrane housing, airgap faucet, RO Mate 4 tank, 1/2" brass tee, 500KPA pressure reducing dual check valve,brass ball valve, flow restrictor, drain clamp, wrench, tubings, JG fittings and thread seal.

WTFC25SNGNM TFC-4PLF 25GPD Microline Undersink RO System 1 $ 680.00WTFC35SOPLF TFC-4PLF 35GPD Microline Undersink RO System 1 $ 710.00



WATERMART R.O. SYSTEMS REPLACEMENT MEMBRANES & CARTRIDGESProduct No. Description Qty Req.

W4SRO36WMTFM-36 Desal Residential Thin Film Membrane Element, 36Gpd 1WCMBL10S05 10" 5 micron Std Dia. Sediment Spun Graded Density 1WCCB10S05 10" 5 micron Std Dia. Carbon Block 1WCIC10S14 10" x 2" In-Line Carbon 1/4" Bsp (Disposable) 1




W4SRO150WMTLC-150LP Desal Residential Thin Film Membrane Element, 150Gpd, Low Pressure 1WCMBL10S05 10" 5 micron Std Dia. Sediment Spun Graded Density 1WCCB10S05 10" 5 micron Std Dia. Carbon Block 1WCIC10S14 10" x 2" In-Line Carbon 1/4" Bsp (Disposable) 1

MICROLINE R.O. SYSTEMS REPLACEMENT MEMBRANES & CARTRIDGESProduct No. Description Qty Req. Price

TFC-25gpdWMS1227RS Membrane for Microline TFC-25D (25gpd TFC-RO) 1 $ 106.00WCS7028F Sediment Carbon Cartridge Filter (25gpd TFC-RO) 1 $ 25.65WCS7025 Granular Activated Carbon Cartridge Filter for 14gpd & 25gpd 1 $ 19.50WCS7206W In-Line GAC Post Filter Carbon Cartridge 2"x6", White 1 $ 19.60

TFC-35gpdWMS1448RS Membrane for Microline TFC-35 (35gpd TFC-RO) 1 $ 114.00WCS7111 5 Micron Sediment Pre-Filter 2.3" (35gpd TFC-RO) 1 $ 8.40WCS7125 Granular Activated Carbon Cartridge Filter 2.3" (35gpd TFC-RO) 1 $ 25.25WCS7206W In-Line GAC Post Filter Carbon Cartridge 2"x6", White 1 $ 19.60

CTA-14gpdWMS1224S Membrane for Microline CTA-14D (14gpd CTA-RO) 1 $ 99.50WCS7011 Microline 5 Micron Sediment Cartridge Filter (14gpd CTA-RO) 1 $ 7.10WCS7025 Granular Activated Carbon Cartridge Filter for 14gpd & 25gpd 1 $ 19.50WCS7206W In-Line GAC Post Filter Carbon Cartridge 2"x6", White 1 $ 19.60



MERLIN RO PRICE LISTProduct No. Description

1-2 3-5 6+This Merlin comes standard with the RO unit with Airgap Faucet

MROSB Merlin RO System with Airgap Faucet $ 736.00 $ 709.00 $ 684.00

This Merlin comes standard with just the RO unit Without the Airgap Faucet

MROSLF Merlin RO System less Airgap Faucet $ 719.00 $ 692.00 $ 667.00

Installation KitThis installation kit comprises of the following:- Pressure reducing valve, Dual check valve, Brass Ball valve,

1/2" Fem. x 1/2" Tube fitting and 1/2" Brass Comp. Tee.MROIK Merlin RO Installation Kit $ 104.00

Accessories1261345 Merlin Flush Kit (Accumulator tank & 1/4" Tubing) $ 128.00N7005 Dual Check Valve 15mm M&M $ 37.60PI451614CS JG 1/2" Female x 1/2" Tube Straight connector $ 8.50SYR31215 Pressure Reducing Valve Adjustable 15mm F&F $ 97.10MABBV90MF12C Brass Ball Valve 90 degree 1/2" M.F. Chrome $ 13.10MABT12CMC Brass Tee 1/2" Comp. x 1/2" M.I. x 1/2" Comp. $ 6.50

Replacement Spares1239705 Sump for Merlin & Modular Pro RO's $ 40.501244617 Manifold for Merlin RO $ 202.001239708 Support Leg/Wrench for Merlin & Modular Pro RO's $ 50.601240564 Drain Boa Kit $ 20.20

Qty Buy Price

1240564 Drain Boa Kit $ 20.201240116 3/8" Drain Disconnect Elbow - Dk Grey $ 10.101240117 1/2" Feed Disconnect Elbow - White $ 10.101240118 3/8" Permeate Disconnect Elbow - Blue $ 10.101240119 1/4" Flush Disconnect Elbow - Lt Blue $ 10.101239731 Locking Bar for Merlin & Modular Pro RO's $ 10.101240326 Sump O-ring for Merlin & Modular Pro RO's $ 3.401254894 Airgap Faucet for Merlin RO $ 60.70H1023-2M 3/8" Black Poly Tubing - Cut Length at 2 Metres $ 3.20PE12500E 3/8" Poly Tubing, Black, 152Mtr Roll $ 194.00MAJGTB14 JG Tubing Blue 1/4" OD, per metre $ 0.80MAJGTFRB14 JG Tubing Blue 1/4" OD, per 152M Roll $ 97.00MAJGTB38 JG Tubing Blue 3/8" OD, per metre $ 1.60MAJGTFRB38 JG Tubing Blue 3/8" OD, per 152M Roll $ 194.00MAJGTC12 JG Tubing Clear 1/2" OD, per metre $ 2.40MAJGTFRC12 JG Tubing Clear 1/2" OD, per 76M Roll $ 145.00MAJGTR12 JG Tubing Red 1/2" OD, per metre $ 2.40MAJGTFRR12 JG Tubing Red 1/2" OD, per 76M Roll $ 145.00

Replacement Cartridges & Membranes1238342 Membrane Element for Merlin & Modular Pro RO's $ 151.001237460 Carbon Prefilter Cartridge for Merlin & Modular Pro RO's $ 32.001244746 Carbon Postfilter Cartridge w/ Auto Shut Off for Merlin RO $ 25.201262847 10-Micron Sediment Prefilter for Merlin & Modular Pro RO's $ 16.901269491 Auto Shut Off Cartridge for Merlin RO Unit $ 25.20

NOTE: MAXIMUM DISCOUNT ON THE MERLIN ROPRODUCT RANGE IS 5% ONLY



REPLACEMENT MEMBRANESModel Description Ctn Qty Price

WMTFM-36 Desal Residential Thin Film Membrane Element, 36Gpd 1 $ 49.00WMTFM-50 Desal Residential Thin Film Membrane Element, 50Gpd 1 $ 50.00WMTFM-75 Desal Residential Thin Film Membrane Element, 75Gpd 1 $ 53.00WMTFM-100 Desal Residential Thin Film Membrane Element, 100Gpd 1 $ 62.00WMTLC-150LP Desal Residential Thin Film Membrane Element, 150Gpd, Low Pressure 1 $ 88.00WMS1227RS Membrane for Microline TFC-25D (25gpd TFC-RO) 1 $ 106.00WMS1448RS Membrane for Microline TFC-35 (35gpd TFC-RO) 1 $ 114.00WMS1224S Membrane for Microline CTA-14D (14gpd CTA-RO) 1 $ 99.50

FILTER HOUSING ACCESSORIES & SPARE PARTSModel Description Ctn Qty Price

O-RingsWAOR10HS O-Ring for 10" Housing Std Dia. 6 $ 2.50WAOR20HS O-Ring for 20" Housing Std Dia. 6 $ 2.50WAOR10HSDO O-Ring (2) for 10" Double O-ring Housing Std Dia. 6 $ 3.00WAOR1020HLDO O-Ring (2) for 10/20" Double O-ring Housing Lge Dia. 6 $ 3.50WAORLD O-Ring for Lge Dia Pentek Housing 6 $ 5.50

Wrench'sWAW10HS Wrench for 10" Housing Std Dia. 6 $ 2.50WAWV10HS Wrench for 10" Vortex Housing, Std Dia. 6 $ 4.20WAW20HS Wrench for 20" Housing Std Dia. 6 $ 3.00WAW1020HL Wrench for 10"/20" Housing Lge Dia. 6 $ 6.00

BracketsWABS1020SW Bracket for 10"/20" Housing Std Dia. 6 $ 3.30WABVS10SW Bracket for 10" Vortex Housing Std Dia. 6 $ 4.65WABD10SW14 Bracket for Dual Undersink System, 1/4" 6 $ 8.60WABD20SW Bracket Double for 20" Housings Std Dia. 6 $ 12.50WABVD10SW Bracket for Dual Undersink System, Vortex Housing 6 $ 4.65WABS1020LW Bracket for 10"/20" Housing Lge Dia. 6 $ 13.40WABT10SW14 Bracket for Triple Undersink System, 1/4" 6 $ 12.50WABS10SS14 Stainless Steel Bracket for 10" Housing Std Dia. 1/4" 6 $ POAWABD1020LSS Stainless Steel Dual Bracket for 10"/20" Housing Lge Dia. 6 $ POAWABS1020SS Stainless Steel Bracket for 10"/20" SS housing 6 $ POAWAQCMBW Quick Connect Single Mounting Bracket 6 $ 7.00

Cartridge CouplersWACCSDC Coupler for Std Dia Cartridge 1 $ 3.50WACCLDC Coupler for Lge Dia Cartridge 1 $ 4.75



RO & FILTER SYSTEMS ACCESSORIES & SPARE PARTSModel Description Ctn Qty Price

Filter HeadsWAQCVIH14 Quick Connect Valve in Head 1/4" 1 $ 50.00

FaucetsWALRFCSAG Long Reach Faucet, Chrome with Air Gap 1 $ 26.80WALRFCTFAG Long Reach Touchflo Faucet, Chrome with Air Gap 1 $ 110.00WALRFCS Long Reach Faucet, Chrome 1 $ 18.60WALRFCD Long Reach Faucet, Chrome, Delux, Dome Handle 1 $ 25.00WASNFCL Swan Neck Faucet, Chrome, Delux, Lever Handle 1 $ 25.00WACTSC Spout for Counter Top, Chrome 1 $ 4.20WAFBP Plastic Bracket for Faucet 1 $ 4.70

Pressure Limiting - Backflow Prevention ValvesWAPLCV3501214 In-Line Filter Control Valve 350KPA, 1/2" x 1/4" (RMC) 1 $ 54.50WAPLCV5001214 In-Line Filter Control Valve 500KPA, 1/2" x 1/4" (RMC) 1 $ 54.50WADCV12F Brass Dual Check Valve 1/2" F.I. (RMC) 1 $ 29.30

Ball ValvesWAPEBV14F14T Plastic Elbow Ball Valve 1/4" F.I. x 1/4" Tube 1 $ 13.45WABBV90MF12C Brass Ball Valve 90 degree 1/2" M.F. Chrome 1 $ 13.50

RO TanksWAROSTB32 3.2 Gallon Metal Tank, Blue, with NSF Approval 1 $ 71.50WAROPTW32 3.0 Gallon Plastic Tank, White, with NSF Approval 1 $ 71.50WAROC2233 RO Mate 4 1 $ 180.00

RO Components for WatermartWAROHPCV High Pressure Switch for RO 1 $ 9.50WAROLPCV Low Pressure Switch for RO 1 $ 9.50WAROSV14F Solenoid Valve 1/4" F.I. 1 $ 35.00WAROASOV Auto Shut Off Valve for Undersink RO 1 $ 7.50WAROECV14T18M 1/4"T x 1/8" Male Check Valve 1 $ 11.50WAROH RO Membrane Housing, Double O-Ring 1 $ 12.15WAROFR300CC Flow Restrictor 300cc 1 $ 5.00WAROFR450CC Flow Restrictor 450cc 1 $ 5.00WAROFR750CC Flow Restrictor 750cc 1 $ 5.00WAROCVB Single Way Check Valve for RO Brass 1 $ 9.00WAROMCS Single Mounting Clip (L) for RO 1 $ 1.20WAROMCD Double Mounting Clip (S-L) for RO 1 $ 1.50WAROSDC38 Steel Drain Clamp 3/8" 1 $ 9.85

RO Components for MicrolineWAROHTFC35 Housing for Microline TFC35 1 $ 41.00WAROASOVTFC Auto Shut Off Assembly (RO Manifold) for Microline TFC models 1 $ 18.95WAROSDC38 Steel Drain Clamp 3/8" 1 $ 9.85WAROS3069 O-Ring for Microline TFC35 Housing 1 $ 1.10WARON1021 O-Ring for Microline Housing 1 $ 1.10WAROFRY60 Drain Restrictor 60Gpd Yellow, for Microline TFC25 1 $ 5.00WAROFRB80 Drain Restrictor 80Gpd Blue, for Microline TFC35 1 $ 5.00WAROFRP125 Drain Restrictor 125Gpd Purple, for Microline TFC35 1 $ 5.00WARODCV18 Duckbill Check Valve 1/8" 1 $ 5.00WARODR Duckbill Retainer 1 $ 0.75WARODRIT Duckbill Retainer Insert Tool 1 $ 7.35



RO & FILTER SYSTEMS ACCESSORIES & SPARE PARTS Cont.Model Description Ctn Qty Price

Plastic FittingsWAJT14T14M14T Jaco Style Tee, 1/4" Tube x 1/4" M.I. x 1/4" Tube 1 $ 1.75WAPTN14 Plastic Threaded Nipple 1/4" 1 $ 0.70WAPRB1214 Plastic Reducing Bush 1/2" x 1/4" 1 $ 1.50WASCTP Stand for Counter Top 1 $ 1.75

Brass FittingsWABT12CMC Brass Tee 1/2" Comp. x 1/2" M.I. x 1/2" Comp. 1 $ 7.50WABRB1214 Brass Reducing Bush 1/2" x 1/4" 1 $ 1.60WADVHF14C Diverter Valve C.P. Brass, High Flow 1/4" 1 $ 16.20WAADVC Adaptor, Diverter Valve C.P. 1 $ 3.15WAECTSC Counter Top Elbow C.P. Brass for Spout 1 $ 1.40WAE14M14TC Counter Top Elbow C.P. Brass 1/4" M.I. x 1/4" Tube 1 $ 3.05

John Guest FittingsWAJGBV14T14M JG Ball Valve 1/4" Tube x 1/4" M.I. 1 $ 12.50WAJGEBV14F38T JG Elbow Ball Valve 1/4" F.I. x 3/8" Tube 1 $ 14.40WAJGTA14TF JG Tap Adaptor 1/4" Tube x 7/16"UN F.I. 1 $ 4.20WAJGTA14T34F JG 1/4" Tube x 3/4" Female 1 $ 6.95WAJGT14T JG Tee 1/4" Tube 1 $ 6.10WAJGE14T14M JG Elbow 1/4" Tube x 1/4" M.I. 1 $ 4.00WAJGE14T18M JG Elbow 1/4" Tube x 1/8" M.I. 1 $ 3.50WAJGSC14T18M JG Straight Connector 1/4" Tube x 1/8" M.I. 1 $ 2.70WAJGSC14T14F JG Straight Connector 1/4" Tube x 1/4" F.I. (Sterilizer Adaptor) 1 $ 4.90WAJGSC14T14M JG Straight Connector 1/4" Tube x 1/4" M.I. 1 $ 3.05WAJGSC14T14M JG Straight Connector 1/4" Tube x 1/4" M.I. 1 $ 3.05WAJGSC14T14T JG Straight Connector 1/4" Tube x 1/4" Tube 1 $ 3.90WAJGLC14 JG Locking Clip, 1/4" 1 $ 1.50WAJGLC38 JG Locking Clip, 3/8" 1 $ 1.60

Note: Full range of John Guest Fittings available upon request.

TubingWAJGTW14 JG Tubing White 1/4" OD, per metre 1 $ 1.10WAJGTB14 JG Tubing Blue 1/4" OD, per metre 1 $ 1.10WAJGTY14 JG Tubing Yellow 1/4" OD, per metre 1 $ 1.10WAJGTW38 JG Tubing White 3/8" OD, per metre 1 $ 2.20WATWLP14 Tubing White 1/4" OD, Low Pressure, per metre 1 $ 1.10WAJGTFRW14 JG Tubing White 1/4" OD, per 152 metre roll 1 $ 97.00WAJGTFRB14 JG Tubing Blue 1/4" OD, per 152 metre roll 1 $ 97.00WAJGTFRY14 JG Tubing Yellow 1/4" OD, per 152 metre roll 1 $ 97.00

Testing EquipmentWATDSPM1PPM TDS Test Meter, 1ppm to 999ppm x 10 1 $ 75.00

Thread TapeWATS1012 Roll of Thread Seal 10m x 12mm 10 $ 1.60

Please Note: Specialty Cartridges and Housings Available Upon Request.

Please Note: Full PENTEK Product range available upon Request.



Date post:	08-Jul-2018
Category:	Documents
Upload:	hoangkiet
View:	358 times
Download:	22 times

FILTER HOUSINGS 1 -...

Documents