Page 43 1101 S. Prairie Ave. PO Box 148 Waukesha, WI 53187 Phone 262-547-3500 1-800-347-3501 Fax 262-547-3927 Email [email protected]www.schaeferbrush.com Schaefer Brush Tube Brushes Section 10 Twisted Wire Brushes The small symbols represent a cross section of a twisted brush. Single Spiral/Single Stem (2 wire) Brush bristles are twisted between two stem wires with a single wire on each side. Double Spiral/Double Stem (4 wire) Brush bristles are twisted between four stem wires with two layers of bristle. Each layer is perpendicular to the other with a single stem wire in each quadrant. Single Spiral/Double Stem (4 wire) Brush bristles are twisted between four stem wires with two stem wires on each side. Speeds Observe all speed restrictions indicated on brushes, containers, labels, or printed literature. “MSFS” means “Maximum Safe Free Speed” (RPM); that is, spinning free with no work applied. For safety, never exceed “MSFS”. Consult our office or representative for maximum safe speeds pertaining to your application, if not predetermined. Guards Keep all machine guards in place. Short Handle Nylon & Bristle Tube Brushes Nylon Tube Brushes Single Spiral/Single Stem Part # Dia. X Brush Part Overall Length Fill Dia. Pack Pack Weight 14504 1/4” x 2” 6-1/2” .010 12 0.7 14510 3/8” x 2” 6-1/2” .010 12 0.7 14517 1/2” x 3” 9” .012 12 0.9 14529 3/4” x 3” 9” .008 12 1.1 Natural Bristle Tube Brushes Single Spiral/Single Stem Part # Dia. X Brush Part Overall Length Pack Pack Weight 10209 1/4” x 2” 6-1/2” 12 0.8 10210 3/8” x 2” 6-1/2” 12 0.8 10220 3/8” x 2” 9” 12 0.9 10211 1/2” x 3” 9” 12 0.8 10221 1/2” x 3” 12” 12 1.1 10212 3/4” x 3” 9” 12 1.1 10214 3/4” x 3” 12” 12 1.2 10213 1” x 4” 12” 12 1.3 Custom brushes can be made to your specifications. Call for details! Safety Equipment & Requirements Safety goggles or face shields must be worn by operators and/or personnel in the working area of brushes. Appropriate protective clothing and equipment must be used where a possibility of injury exists which could be prevented by using such clothing or equipment. Tube br WHEN USING BRUSHES WEAR GOGGLES OR FACE SHIELDS!
Transcript
Page 431101 S. Prairie Ave. PO Box 148 Waukesha, WI 53187Phone 262-547-3500 1-800-347-3501 Fax 262-547-3927Email [email protected] www.schaeferbrush.com
Schaefer BrushTube Brushes Section 10
Twisted Wire BrushesThe small symbols represent a cross section of a twisted brush.
Single Spiral/Single Stem (2 wire)Brush bristles are twisted between two stem wires with a single wire on each side.
Double Spiral/Double Stem (4 wire)Brush bristles are twisted between four stem wires with two layers of bristle. Each layer is perpendicular to the other with a single stem wire in each quadrant.
Single Spiral/Double Stem (4 wire)Brush bristles are twisted between four stem wires with two stem wires on each side.
SpeedsObserve all speed restrictions indicated on brushes, containers, labels, or printed literature. “MSFS” means “Maximum Safe Free Speed” (RPM); that is, spinning free with no work applied. For safety, never exceed “MSFS”. Consult our office or representative for maximum safe speeds pertaining to your application, if not predetermined.
10209 1/4” x 2” 6-1/2” 12 0.810210 3/8” x 2” 6-1/2” 12 0.810220 3/8” x 2” 9” 12 0.910211 1/2” x 3” 9” 12 0.810221 1/2” x 3” 12” 12 1.110212 3/4” x 3” 9” 12 1.110214 3/4” x 3” 12” 12 1.210213 1” x 4” 12” 12 1.3
Custom brushes can be made to your specifications. Call for details!
Safety Equipment & RequirementsSafety goggles or face shields must be worn by operators and/or personnel in the working area of brushes. Appropriate protective clothing and equipment must be used where a possibility of injury exists which could be prevented by using such clothing or equipment.
Tube br
WHEN USING BRUSHES WEAR GOGGLES OR FACE SHIELDS!
Page 441101 S. Prairie Ave. PO Box 148 Waukesha, WI 53187Phone 262-547-3500 1-800-347-3501 Fax 262-547-3927Email [email protected] www.schaeferbrush.com
Bright White Nylon Tube BrushesTube Brushes - Single Spiral/Double Stem“Food Grade” white nylon tube brushes. FDA approved nylon. 1/4” male pipe thread nipple. Individually sealed in a poly bag. Use the following accessories with the brushes below: Fiberglass Rods 30663, 30664 or 30666, Twisted Steel Extension Handles 31438, 31448 or 31458, Twisted Steel Handle With Ring 30328, 30438, 30548 or 30658, Nylon Rod 36114, 36114-4, 36114S, 36114S-4.
Recommended for stainless steel tubes. 1/4” and 5/16” dia. Brushes have a nipple with 8-32 female thread (use accessories 13042 or 13044). 3/8” thru 1” dia. Brushes have a nipple with 12-24 female thread (use accessories 13002 or 13003).
Stainless Steel Extra Stiff Double Spiral/Double Stem
All condenser tube brushes are boxed individually!
WHEN USING BRUSHES WEAR GOGGLES OR FACE SHIELDS!
Can be custom pad printed with your name & logo. Ask for details!
Page 471101 S. Prairie Ave. PO Box 148 Waukesha, WI 53187Phone 262-547-3500 1-800-347-3501 Fax 262-547-3927Email [email protected] www.schaeferbrush.com
Condenser Tube Brushes
Recommended for brass or copper tubes. 1/4” and 5/16” dia. brushes with female couplings have 8-32 threads (use accessories 13042 or 13044), while 3/8” through 1” dia. have 12-24 female threads (use accessories 13002 or 13003). 1/4”, 5/16”, and 3/8” dia. brushes with male couplings have 8-32 threads (use accessory 13042), while 7/16” through 1” dia. have 1/4”-28 threads (use accessory 13010).
Recommended for stainless steel tubes. 1/4” and 5/16” dia. brushes with female couplings have 8-32 threads (use accessories 13042 or 13044), while 3/8” through 1” dia. have 12-24 female threads (use accessories 13002 or 13003). 1/4”, 5/16”, and 3/8” dia. brushes with male couplings have 8-32 threads (use accessory 13042), while 7/16” through 1” dia. have 1/4”-28 threads (use accessory 13010).
Recommended for cleaning all tubes where deposits are light. 1/4” and 5/16” dia. brushes with female couplings have 8-32 threads (use accessories 13042 or 13044), while 3/8” through 1” dia. have 12-24 female threads (use accessories 13002 or 13003). 1/4”, 5/16”, and 3/8” dia. brushes with male couplings have 8-32 threads (use accessory 13042), while 7/16” through 1” dia. have 1/4”-28 male threads (use accessory 13010).
Page 481101 S. Prairie Ave. PO Box 148 Waukesha, WI 53187Phone 262-547-3500 1-800-347-3501 Fax 262-547-3927Email [email protected] www.schaeferbrush.com
Spin - Clean BrushesSingle stem construction with silicon carbide impregnated nylon. Step trim brush allows better cleaning of enhanced condenser tubes. The long bristles are designed oversized with the intention of bending over, allowing the aggressive filament to come into maximum contact with the lands. The short bristles are able to get into the grooves. These brushes provide better cleaning and longer life than conventional brushes. 1/4”-28 thread (use accessory 13010).
Miniature and Micro-Miniature Brushes - Single Spiral/Single StemFor ultra-fine cross hole deburring, cleaning, blending and polishing of small diameter holes. Made with stainless steel, brass, or nylon.Single-Spiral Miniature Brushes with stainless steel stem and loop for hand use.
Spin - Grit BrushesSingle stem construction with silicon carbide impregnated nylon recommended for brass tubes. This brush is made oversized so the filament will lay over, resulting in increased contact with surface, providing better cleaning and longer life than conventional condenser cleaning brushes. Part #43482 use accessories 13042 or 13044. Part #43484-43488 use accessories 13002 or 13003. Part #93482 use accessory 13042. Part #93484-93488 use accessory 13010.
Page 491101 S. Prairie Ave. PO Box 148 Waukesha, WI 53187Phone 262-547-3500 1-800-347-3501 Fax 262-547-3927Email [email protected] www.schaeferbrush.com
Power Tube BrushesDouble Spiral/Double StemUsed for polishing, blending, burr removal, and cleaning. For use in power tools where heavy duty cleaning is required. Double spiral/Double stem with twisted stem for power operation.
Page 501101 S. Prairie Ave. PO Box 148 Waukesha, WI 53187Phone 262-547-3500 1-800-347-3501 Fax 262-547-3927Email [email protected] www.schaeferbrush.com
Burr Brushes
Heavy Duty Power Brushes - Single Spiral/Single StemUsed in drill presses and hand power tools for deburring, polishing, and cleaning inner bores of tubing, machined cylinders, flat stock, and smooth or threaded blind holes.Available in carbon steel, stainless steel, and brass.
Page 511101 S. Prairie Ave. PO Box 148 Waukesha, WI 53187Phone 262-547-3500 1-800-347-3501 Fax 262-547-3927Email [email protected] www.schaeferbrush.com
Side Tuft Cleaning Brushes
Single Spiral/Single StemUsed for cleaning and polishing threads, inner walls of tubes and cylinders. Solid concentration of bristles provide a high degree of bristle stiffness with little flexing of bristles during operation. For use in power tools. Available in high carbon steel, stainless steel and brass.
Page 521101 S. Prairie Ave. PO Box 148 Waukesha, WI 53187Phone 262-547-3500 1-800-347-3501 Fax 262-547-3927Email [email protected] www.schaeferbrush.com
Abrasive Nylon Brushes
Silicon Carbide - Single Spiral/Double StemUsed for wet or dry cleaning, polishing, blending, deburring inner walls of tubes, cross hole deburring and thread cleaning. Double stem con-struction used for added strength for power use or manual cleaning. Available in silicon carbide and aluminum oxide.
Page 531101 S. Prairie Ave. PO Box 148 Waukesha, WI 53187Phone 262-547-3500 1-800-347-3501 Fax 262-547-3927Email [email protected] www.schaeferbrush.com
Abrasive Nylon BrushesSilicon Carbide - Single Spiral/Single StemUsed for wet or dry cleaning, polishing, blending, deburring inner walls of tubes, cross hole deburring and thread cleaning. Single-spiral construction made with a continuous end. Available in silicon carbide and aluminum oxide.
