Smart IP Surveillance Camera Reference Design

Ready-to-Go solution enables OEMs to offer a range of smart cameras for a variety of applications

IPN Came t

eInfochips' IPNetCam is a Smart IP Surveillance Camera

Reference Design based on TI DaVinci™ technology. Based on

TMS320DM6446, IPNetCam is a ready-to-go solution, fully

enabled for intelligent surveillance applications with features

like object detection and classification.

It offers OEMs a complete hardware and software package

needed to design Smart IP Surveillance solutions with a variety

of advanced features. The camera form factor hardware is

optimized for BOM and features all the necessary interfaces.

The software is compliant to DaVinci™ XDM framework. Based

on Linux operating system the software supports Dual Mode

Encoding and ObjectVideo OnBoard™ Algorithm for content

analysis.

Web Viewer Application with GUI

H.264, MPEG4,JPEG, G.7xx

Codec Engine DSP/BIOS™ Link

DSP/BIOS™

ObjectVideo Content Analytics

MontaVista Linux

Firmware & Drivers

eInfochips’ Production Ready Hardware

Benefits

Key Components

Complete Hardware and Software Flexibility to Create

Optimized Cameras

Flexible and scalable development of hardware and

software features

Portability of codecs/algorithms with XDM compliant

architecture

Best in Class Features and Performance with DaVinci

Market-proven video analytics from ObjectVideo on DaVinci

Triple streaming for remote monitor, network and local SD

storage

Rapid Proof-of-Concept and Customized Product Development

Sensor-to-Storage: Complete hardware with optimized

BOM

Integrated suite of software development framework and

tools

Development Models

eInfochips delivers the OEM Ready reference design

package including Hardware & Software

eInfochips enables customer providing Hardware &

Software customization reusing IP & building blocks

from reference design

eInfochips provides Accelerated Product Development

Services leveraging its expertise in Surveillance domain

OEM to take reference

design to production

OEM planning to customize

design

OEM planning to build a

new product

Quick Time to Market

Fully Customized Product

Features

IPNetCam incorporates a highly sensitive 3 Megapixel, 1/2”

Progressive Scan CMOS sensor with Electronic Rolling Shutter

(ERS) and Global Reset Release (GRR). It supports Electronic

PTZ, White Balance, Day/Night and Image Scaling features.

CMOS Sensor

Leveraging the advanced video & image processing features

offered by DaVinci technology, IPNetCam supports three

compression formats: H.264, MPEG4 and JPEG allowing users

to choose the appropriate combination of encoding to match

the network environment and monitoring applications.

It supports D1, VGA, QCIF and CIF resolutions with 30 FPS

performance for all the compression formats. With triple

streaming feature, one JPEG and two MPEG4 images can be

streamed simultaneously.

Dual Mode Encoding & Triple Streaming

Feature-rich GUI

IPNetCam has a user friendly web based GUI accessible through

browser. It enables remote viewing, controlling and configuring the

camera. Some of the features of the UI include:

Real time viewing

Defining the rules & customizing alerts

Configuration of camera like, IP address, selection of encoding

formats, audio/ video settings and more

IPNetCam supports ObjectVideo OnBoard technology, a market proven solution for video content

analysis. This allows Rules-based object detection and classification for any suspicious activity in the

area of interest. Some of the content analysis features include:

Tripwire

Object Appears/ Disappears

Lights on/off

Camera View Change

IPNetCam is equipped with 2 event inputs and 2 alarm outputs. These IOs can be used to trigger

external devices for alerts on any event.occurrence of

Alarm Functions

Sensor Input/ Alarm Output

With SD interface, IPNetCam supports SD memory cards for local storage. SD cards allow pre-post

event video recording for short durations. User can store JPEG compressed video on the SD card.

IPNetCam provides the user with option to select the encoding format for video compression for

local storage.

Pre-Post Alarm Storage

www.einfochips.com sales@einfochips.com

India Headquarters

eInfochips Ltd.11/A-B, Chandra Colony, Ellisbridge, Ahmedabad 380 006Tel: +91-79-2656 3705Fax: +91-79-2656 0722

Pune

Tel: +91-20-2544 2394

Bangalore

Tel: +91-80-4121 6622

US Headquarters

Tel: +1-408-496-1882

Tel: +1-408-621-4634

Austin

Boston

Tel: +1-508-450-1546

Chicago

Tel: +1-847-330-4463

Japan

Tel: +81-90-1534-9261

eInfochips reserves the right to make changes to the information, text, graphics or other items contained within this material at any time, without any prior notice. eInfochips will make their best effort, however cannot commit to keep this material up-to-date.To be assured that you have the latest material, you are encouraged to contact sales@einfochips.com

System

Platform

Memory

Embedded OS

Interfaces

Video Input

Audio Input

Audio Output

Network Interface

Storage

GPIO

Serial Interface

Infra Red

Video

Video Compression

Resolutions Supported

Maximum Frame Rates

Bit Rate

Audio

Audio Compression

Protocols

Streaming Protocols

Ethernet Protocols

Number of Clients

Power

Operating Conditions

TI DaVinci™ TMS320DM6446 (C64x+ 594MHz; ARM926EJ 297 MHz)

Program Memory: 64MB NAND Flash

Systems Memory: 128MB DDR2 SDRAM (Expandable to 256MB)

Embedded Linux

CMOS Sensor

Mono Microphone (Minimum 8kHz-to-96kHz sampling)

Stereo (Minimum 8KHz-to-96KHz sampling)

10/100 Ethernet

Supports Secure Digital Memory Card

2 Event Inputs (TTL/CMOS compatible, Non isolated)

2 Alarm Output (12VDC, 0.1A)

RS232

IR Interface for Remote Control

H.264, MPEG4, JPEG

D1, VGA, CIF, QCIF

25~30 FPS (for all resolutions)

Configurable

G.711

RTP, RTSP, NTP

HTTP, HTTPS, FTP, SMTP, UPnP, IP

10

12VDC ±10%, 600mA maximum

Operating temperature 0°C to 45°C

Storage temperature -25°C to 85°C

Humidity 5% to 95% (non-condensing)

8/10-bit CMOS Sensor interface

Lens assembly mounted separately on

the sensor board

Microphone on Sensor board

2.5mm Stereo Jack

RJ45 connector

SD card connector

Terminal block connector

Terminal block connector

DB9 connector

POE (Optional)

Specifications

Dimensions

5.0”

1.4

5”

Side view

CPU Board

Sensor Board

:

:

5.0” x 2.6”

1.75” x 1.45”

Drawings are not to Scale: View Only

Front View

2.6"

1.75"

1.4

5”