23
Organised by In cooperation with PLATE consortium members 3 rd PLATE Conference September 18 – 20, 2019 Berlin, Germany FINAL PROGRAMME
Organised by In cooperation with
PLATE consortium members
3rd PLATE ConferenceSeptember 18 – 20, 2019Berlin, Germany
FINALPROGRAMME
2 3
SCIENTIFIC ADVISORY COMMITTEEProf. Cosette Armstrong, Oklahoma State University, USAProf. Conny Bakker, TU Delft, The NetherlandsProf. Ruud Balkenende, TU Delft, The NetherlandsProf. Casper Boks, NTNU, NorwayProf. Maria Bovea, Universitat Jaume I., SpainProf. Brian Burns, Carleton University Ottawa, CanadaProf. Jonathan Chapman, Carnegie Mellon University, USAProf. Martin Charter, UCA, UKDr. Rebecca Collins, University of Chester, UKProf. Ichiro Daigo, University of Tokyo, JapanDr. Sian Dixon, University of Worcester, UKProf. Kate Fletcher, London College of Fashion, UKDr. Daniel Guzzo, Universidade São Paulo, Brazil, and TU Delft, The NetherlandsDr. Alison Gwilt, University of South Australia, AustraliaProf. Erik G. Hansen, Johannes Kepler Universität Linz, AustriaChristine Henseling, IZT – Institut für Zukunftsstudien und Technologiebewertung, GermanyDr. Sabine Hielscher, Technische Universität Berlin, GermanyProf. Mikko Jalas, Aalto University, FinlandProf. Jouni Juntunen, Aalto University, FinlandDr. Cindy Kohtala, Aalto University, FinlandDr. Kirsi Laitala, Oslo Metropolitan University, NorwayDr. Debra Lilley, Loughborough University, UKDr. Tatu Marttila, Aalto University, FinlandDr. Max Marwede, Fraunhofer IZM and Technische Universität Berlin, GermanyDr. Ruth Mugge, TU Delft, The NetherlandsDr. Pekka Murto, Aalto University, FinlandDr. Mirja Niemelä, Aalto University, FinlandDr. Masahiro Oguchi, National Institute for Environmental Studies, JapanDr. Riikka H. Räisänen, University of Helsinki, FinlandProf. Ulla Raebild, Designskolen Kolding, DenmarkDr. Valentina Rognoli, Politecnico di Milano, ItalyProf. Jan Schoormans, TU Delft, The NetherlandsDr. Pål Strandbakken, Oslo Metropolitan University, NorwayDr. Sonja S. van Dam, TU Delft, The NetherlandsDr. Olaf Wittler, Fraunhofer IZM, GermanyDr. Gordon Young, Sheffield Hallam University, UK
LOCAL ORGANIZING COMMITTEEStefan Ast, Fraunhofer IZM, GermanyMartina Creutzfeldt, Ajda Omrani, mcc Agentur für Kommunikation GmbH, Germany
CONFERENCE CHAIRSDr. Nils F. Nissen, Fraunhofer IZM, GermanyProf. Melanie Jaeger-Erben, Technische Universität Berlin, Germany
CO
NF
ER
EN
CE
IN
FO
RM
AT
ION
Nils F. Nissen Melanie Jaeger-Erben
Stefan Ast Martina Creutzfeldt
CONFERENCE PROGRAMME CHAIR / CONFERENCE SERIES CHAIRProf. Kirsi Niinimäki, Aalto University, Finland Prof. Tim Cooper, Nottingham Trent University, UK
Tim CooperKirsi Niinimäki
Welcome to the third PLATE conference 2019 in Berlin!Product Lifetimes And The Environment – A matter of significance Our current systems of consumption and production cause long-lasting social-ecological damage and a fundamental change seems inevitable, if livelihoods of present and future generations are to be preserved. The lifetimes of products and their performance concerning reliability, functionality, re-usability and recyclability are core issues in the transformation from a linear to a more sustainable circular economy. PLATE participants engage in significant research on how to enable more sustainable practices of designing, producing, using, re-pur-posing and recycling products and on how to assess the sustainability of these endeavours. The PLATE conference offers an important and constantly growing inter- and transdisciplinary network that operates at the crossroads of engineering, design, social sciences and environmental sciences. The transdisciplinary nature of the PLATE community offers a great opportunity to have a substantial impact on sustainability transformations.
We are very thankful for your participation at the PLATE 2019 and for your valuable contribution to the progress of the PLATE community.
The final programme presents the great variety of topics and exciting activities of the PLATE community and we hope you will enjoy the PLATE 2019 as much as we have enjoyed the preparation of it!
WELCOME INTERNATIONAL BOARD
GE
NE
RA
L I
NF
OR
MA
TIO
N
Ajda Omrani
4 5
PROGRAMME AT A GLANCE
CO
NF
ER
EN
CE
IN
FO
RM
AT
ION
WEDNESDAY, SEPT. 18
01.30– 2.20 pm Opening & Keynote 1: Prof. Otto von Busch
CONSUMER PRACTICES AND PERSPECTIVES
LIVING LABS AND COMMUNITIES OF REPAIR SPECIFIC APPLICATION FIELDS ASSESSMENTS RELATING TO
PRODUCT LIFETIME BUSINESS MODELS AND PSS
02.30 – 04.00 pm Session A.1Repair Practices and User Perspectives
Session B.1Living Labs and Open Spaces
Session C.1The Lifetime of Textiles I
Session D.1Assessment Questions Exemplified by EEE Cases I
Session E.1Data Intelligence in
Business Model and Product Design
04.30 – 06.30 pmSession A.2
Sustainable Consumption and Lifetime Enhancing Practices I
Session B.2Cultures and Communities of Repair
Session C.2The Lifetime of Textiles II
Session D.2Assessing the Impact of Repair and Repairability
Session E.2Circular Business Model Dynamics
07.00 – 10.00 pm Reception @ Conference Hotel
THURSDAY, SEPT. 19 09.00 – 10.30 am Workshop 1 Workshop 2 Workshop 3 Workshop 4 Workshop 5
11.00 – 12.30 pmSession A.3
Sustainable Consumption and Lifetime Enhancing Practices II
Session B.3Strategies and Structures to Faciliate Repair I
Session C.3Material Innovation
Session D.3Assessment Questions Exemplified by EEE Cases II
Session E.3Circular Business Models in Different Industries
12.30 – 01.30 pm Lunch Break
01.30 – 02.15 pm Keynote 2: Prof. Heike Derwanz
02.30 – 03.20 pm Poster Pitches A Poster Pitches B
03.30 – 04.30 pm Poster Session @ Coffee Break
04.30 – 06.30 pmSession A.4
Clothing Consumption and the Lifetime of Textiles
Session B.4Strategies and Structures to Faciliate Repair II
Session C.4Lifetime of Electric and Electronic Equpiment
Session D.4Legal Frameworks for Product Longevity
Session E.4Circular Business Model Development
in Fashion and Textiles
07.00 – 11.00 pm Dinner @ Conference Hotel
FRIDAY, SEPT. 20 09.00 – 10.30 am Workshop 6 Workshop 7 Workshop 8 Workshop 9 Workshop 10
11.00 – 12.30 pmSession A.5
Product Lifetimes at the Production- Consumption Interface
Session B.5Design for Sustainable Products I
Session C.5Waste as a New Product
Session D.5Assessment Questions Exemplified by EEE Cases III
Session E.5Prerequisites for Circular Business
Model Formation
12.30 – 01.30 pm Lunch Break
01.30 – 03.30 pm Session A.6Consumers in a Circular Economy
Session B.6Design for Sustainable Products II
Session C.6Exploring Consumer-Product-Relations
Session D.6Assessments from Micro and Macro Perspectives
Session E.6Policies for the Circular Economy
03.45 – 04.30 pm Keynote 3: Prof. Jacqueline M. Cramer & Closing
GE
NE
RA
L I
NF
OR
MA
TIO
N
Check outadditionalWorkshop Xdetails on p. 20
6 7
GE
NE
RA
L I
NF
OR
MA
TIO
N
CO
NF
ER
EN
CE
IN
FO
RM
AT
ION
CONFERENCE HALL PLAN
Seminaris Voreröffnungsbüro Berlin 2009
Sorbonne
Oxford
Cambridge
wardrobe+
200 paxopening, sessions,
keynotes
100 paxsessions
coffee breaks(lunch at hotel restaurant
and the yard)
variation
Wardrobe+Conference
Office
CambridgeOpening Session
Keynotes
Oxford
Ground Floor
SEMINARIS CAMPUSHOTEL BERLINSEMINARIS CAMPUSHOTEL BERLIN
Grundriss Seminarräume / Conference room layout
Lobby
Harvard
Standford
PrincetonYale
100 paxsessions
100 paxsessions
(max. 64 pax)poster slam session
workshopsmeetings
coffee breaks &permanent poster
exhibition
Che
ckIn
Cou
nter
to th
e con
feren
ce
not bookednot booked
Second Floor
How to Find Your Way Around
For the 2019 PLATE Conference we have the exclusive run of the Dahlem Cube, the confe-rence centre next to the SEMINARIS Hotel. The keynotes and plenary sessions will be held on the second floor in room Cambridge.
Please note that for your convenience and better orientation the conference tracks and rooms have been colour coded throughout the programme.
SEMINARIS CAMPUSHOTEL BERLINSEMINARIS CAMPUSHOTEL BERLIN
Grundriss Seminarräume / Conference room layout
Lobby
Harvard
Standford
PrincetonYale
100 paxsessions
100 paxsessions
(max. 64 pax)poster slam session
workshopsmeetings
coffee breaks &permanent poster
exhibition
Che
ckIn
Cou
nter
to th
e con
feren
ce
YaYaY le
not bookednot booked PrincetonYale
Stanford
Harvard
First Floor
#A Cambridge #B Oxford #C Harvard #D Stanford #E Princeton
FoyerReception only
Permanent Poster session
8 9
KEYNOTE SPEAKERS
PROF. OTTO VON BUSCH PARSONS SCHOOL OF DESIGN, THE NEW SCHOOL, USALIFETIMES OF CONFLICT
Prof. Otto von Busch is associate professor of Integrated Design at Parsons School of Design, The New School, in New York City. He has a background in arts, craft, design and theory and has taught and exhibited globally. In his artistic research practice he explores the emergence of a new hacktivist designer role, where the designer engages participants into a collective experience of hands-on empower-ment. Taking inspiration from various forms of social activism, this is an engaged and collective process of enablement, creative resistance and DIY practice, where a community shares and develops new capabilities of craftsmanship for social en-gagement. This work especially highlights how the powers of fashion can be bent to achieve a positive personal and social condition with which the everyperson is free to grow to his full potential.
Seminaris Campus Hotel Berlin
PROF. JACQUELINE M. CRAMERUTRECHT UNIVERSITY, UTRECHT SUSTAINABILITY INSTITUTE, THE NETHERLANDSTHE EVOLUTION OF IMPLEMENTING A CIRCULAR ECONOMY
Prof. Jacqueline Cramer is member of the Amsterdam Economic Board, particularly in charge of the circular economy and professor of Sustainable Innovation at Utrecht University in the Netherlands. Before, she was Minister of Housing, Spatial Planning and the Environment for the Labour Party (2007 – 2010) in the Netherlands. Her background is primarily related to industry, working as a consultant for many years with more than 200 companies on the implementation of sustainable entrepreneurship, corporate social responsibility and circular economy. She represents a unique mix of academic track record, top level political experience and down to earth activism ranging from eco-design, circular economy and practical sustainability to fighting against marine plastic pollution.
PROF. HEIKE DERWANZCARL VON OSSIETZKY UNIVERSITÄT OLDENBURG, GERMANYTHE END OF LIFE OF FAST FASHION
Heike Derwanz is professor of Material Culture in Educational Settings at the Carl von Ossietzky Universität Oldenburg in Germany. As a cultural anthro-pologist and art historian specializing in metropolitan culture and lifestyle she researches urban textile practices in households and their embeddedness in city infrastructures. In her projects about everyday clothing practices in times of fast fashion, minimalism and other degrowth-practices she is interested in social and economic practices of creative innovators and entrepreneurs. The fact that Heike Derwanz has gained deep knowledge on the material culture of clothing in her ethnographic research adds much authenticity and colour to her presentations.
KE
YN
OT
E S
PE
AK
ER
S
KE
YN
OT
E S
PE
AK
ER
S
10 11
O P E N I N G S E S S I O N & K E Y N O T E • W E D N E S D AY, S E P T. 1 8 • 1 . 3 0 - 2 . 3 0 P M
DA
Y 1
• W
ED
EN
SD
AY
OPENING SESSION & KEYNOTE
CO
NF
ER
EN
CE
PR
OG
RA
MM
E
1.30 p.m. Conference Opening Dr. Nils F. Nissen Prof. Melanie Jaeger-Erben Conference Chairs Keynote 1: Lifetimes of Conflict Prof. Otto von Busch Parsons School of Design, The new School, USA
12 13
S E S S I O N 1 • W E D N E S D AY, S E P T. 1 8 • 2 . 3 0 - 4 . 0 0 P M S E S S I O N 1 • W E D N E S D AY, S E P T. 1 8 • 2 . 3 0 - 4 . 0 0 P M
DA
Y 1
• S
ES
SIO
N 1
DA
Y 1
• S
ES
SIO
N 1
> A.1 REPAIR PRACTICES AND USER PERSPECTIVES Session Chair: Melanie Jaeger-Erben, Technische Universität Berlin
2.30 p.m. Economic consequences of consumer repair strategies for electrical household devices Jan Brusselaers1, Ellen Bracquené2, Jef Peeters2, Yoko Dams1
1VITO, Belgium; 2KU Leuven, Leuven, Belgium
3.00 p.m. Investigating user perspectives related to product repair towards a circular economy Nazlı Özkan1,2
1Royal College of Art, London, United Kingdom; 2Linköping Universtiy, Sweden
3.30 p.m. What businesses might benefit from product repair? Insight from different stakeholders Tung Dao, Tim Cooper, Matthew Watkins Nottingham Trent University, Nottingham, United Kingdom
> B.1 LIVING LABS AND OPEN SPACES Session Chair: Sabine Hielscher, University of Sussex
2.30 p.m. Living labs to develop reuse and repair workshops in territories Benjamin Tyl, Romain Allais APESA, Tarnos, France
3.00 p.m. Turning utopias into material: the case of an open space for experimentation in Helsinki Philip Hector, Mikko Jalas Aalto University, Finland
3.30 p.m. Living labs for product circularity: learnings from the ‘Innovation network aiming at sustainable smartphones’ Ferdinand Revellio1,2, Erik G. Hansen1,2, Stefan Schaltegger1
1Leuphana University of Lüneburg, Lüneburg, Germany; 2Johannes Kepler University Linz, Linz, Austria
> C.1 THE LIFETIME OF TEXTILES I Session Chair: Kirsi Niinimäki, Aalto University
2.30 p.m. From speed to volume: reframing clothing production and consumption for an environmentally sound apparel sector Irene Maldini Amsterdam University of Applied Sciences, VU University Amsterdam, Amsterdam, The Netherlands
3.00 p.m. A performance and consumer based lifespan evaluation for T-shirt eco-design Romain Benkirane, Sébastien Thomassey, Ludovic Koehl, Anne Perwuelz ENSAIT, GEMTEX – Laboratoire de Génie et Matériaux Textiles, Lille, France
3.30 p.m. Electronic textiles and product lifetimes: tear downs Rachael Wickenden, Angharad Mclaren, Dorothy Hardy Nottingham Trent University, Nottingham, United Kingdom
> D.1 ASSESSMENT QUESTIONS EXEMPLIFIED BY EEE CASES I
Session Chair: Conny Bakker, TU Delft
2.30 p.m. Quantifying the circular economy potential of prolonging lifetime in energy using products: the washing machine case Gianmarco Bressanelli, Marco Perona, Nicola Saccani University of Brescia, Brescia, Italy
3.00 p.m. Laptop use patterns research on product lifetime and obsolescence aspects Joerg Woidasky, Martin Adrion, Esra Cetinkaya Hochschule Pforzheim, Pforzheim, Germany
3.30 p.m. Environmental impacts of smart bulbs: a discussion paper reviewing the current issues and research Sinclair Park, Miles Park, Mariano Ramirez University of New South Wales, Sydney, Australia
> E.1 DATA INTELLIGENCE IN BUSINESS MODEL AND PRODUCT DESIGN Session Chair: Ruud Balkenende, TU Delft
2.30 p.m. Data-driven decision making instruments to support circular product design Anna Diaz Tena1, Joseph-Peter Schöggl1, Tatiana Reyes2, Rupert Baumgartner1
1University of Graz, Graz, Austria; 2Université de technologie de Troyes, Troyes, France
3.00 p.m. Smart products as enabler for circular business models: the case of B2B textile washing services Andres Alcayaga, Erik G. Hansen Johannes Kepler University Linz, Linz, Austria
3.30 p.m. The use of system dynamics to verify long-term behaviour and impacts of circular business models: a sharing platform in healthcare Daniel Guzzo1,2, Ella Jamsin2, Ruud Balkenende2, Janaina Costa1
1University of São Paulo, São Paulo, Brazil; 2TU Delft, Delft, The Netherlands
14 15
S E S S I O N 2 • W E D N E S D AY, S E P T. 1 8 • 4 . 3 0 - 6 . 3 0 P M S E S S I O N 2 • W E D N E S D AY, S E P T. 1 8 • 4 . 3 0 - 6 . 3 0 P M
DA
Y 1
• S
ES
SIO
N 2
DA
Y 1
• S
ES
SIO
N 2
> A.2 SUSTAINABLE CONSUMPTION AND LIFETIME ENHANCING PRACTICES I Session Chair: Jan Schoormans, TU Delft
4.30 p.m. Green consumption, green divestment? Ethical consumers in the light of divestment practices Ana Gabriela Encino-Munoz1, Mark Sumner1, Pammi Sinha1, Bruce Carnie2
1University of Leeds, Leeds, United Kingdom; 2University of Huddersfield, Huddersfield, United Kingdom
5.00 p.m. Spark joy and slow acquisition: the KonMari method and its impact on moments of consumption Lucy Chamberlin1, Åsa Callmer2
1NTNU, Trondheim, Norway; 2KTH, Stockholm, Sweden
5.30 p.m. Consumer’s perceptions toward longer product use and their influence on product lifespan Haruhisa Yamamoto, Shinsuke Murakami The University of Tokyo, Tokyo, Japan
6.00 p.m. Objects, things and stuff; exploring the awareness of materiality in longer everyday product relationships Clare R. Green1,2
1École des hautes études en sciences sociales, Paris, France; 2ISD Rubika, Valenciennes, France
> B.2 CULTURES AND COMMUNITIES OF REPAIR Session Chair: Ruth Mugge, TU Delft
4.30 p.m. Resisting obsolescence? The role of a ‘culture of repair’ for product longevity Sabine Hielscher, Melanie Jaeger-Erben, Magdalena Meißner Zentrum Technik und Gesellschaft, Technische Universität Berlin, Berlin, Germany
5.00 p.m. The community of transformative repair Guy Keulemans1, Niklavs Rubenis2
1University of New South Wales, Sydney, Australia; 2School of Art & Design, ANU College of Arts & Social Sciences, Acton, Australia
5.30 p.m. Drivers, barriers, and stakeholder roles in repair: a case study of Southern Sweden Jessika Richter, Carl Dalhammar IIIEE, Lund University, Lund, Sweden
6.00 p.m. The REFER project – engaging with the general public on critical raw materials through the medium of electronic repair workshops Michael Johnson1, Colin Fitzpatrick1, Jessika Luth Richter2, Jana Rückschloss4, Jef Peeters3, Milena Bigatto6, Janet Gunter5
1University of Limerick, Limerick, Ireland; 2Lund University, Lund, Sweden; 3University of Leuven, Leuven, Belgium; 4Fraunhofer IZM, Berlin, Germany; 5Restart Project, London, United Kingdom; 6Hub Innovazione Trentino, Trento, Italy
> C.2 THE LIFETIME OF TEXTILES II Session Chair: Kirsi Laitala, Oslo Metropolitan University
4.30 p.m. Deconstructing the clothing design process for a circular economy Essi Karell, Kirsi Niinimäki Aalto University, Finland
5.00 p.m. Positioning textile repair: viewing a culture of perfection through surface imperfections Yolanta Gale, Debra Lilley, Garrath Wilson Loughborough University, Loughborough, United Kingdom
5.30 p.m. Using an emotionally durable design approach to develop knitted prototypes for women living with Raynaud’s syndrome Lisa Shawgi, Katherine Townsend, Dorothy A. Hardy Nottingham Trent University, Nottingham, United Kingdom
6.00 p.m. Everything that went wrong: challenges and opportunities in prototyping long-life garments in a circular economy Rebecca Earley, Laetitia Forst University of the Arts London, London, United Kingdom
> D.2 ASSESSING THE IMPACT OF REPAIR AND REPAIRABILITY Session Chair: Deborah Xaviera Sumter, TU Delft
4.30 p.m. Smartphone repairability scoring: assessing the self-repair potential of mobile ICT devices Bas Flipsen1,2, Matthias Huisken1, Thomas Opsomer1, Maarten Depypere1
1iFixit GmbH, Stuttgart, Germany; 2TU Delft, Delft, The Netherlands
5.00 p.m. Repair or replace? Is it worth repairing an old device from a consumer perspective? Peter Schick, Michael Morys, Axel Neisser, Gunnar Schwan Stiftung Warentest, Berlin, Germany
5.30 p.m. Sustainability assessment of product lifetime extension through increased repair and reuse Ellen Bracquené, Wim Dewulf, Joost Duflou KU Leuven, Leuven, Belgium
6.00 p.m. A systematic method to qualify the repairability of technical products Franz Streibl Runder Tisch Reparatur, Reutlingen-Mittelstadt, Germany
16 17
S E S S I O N 2 • W E D N E S D AY, S E P T. 1 8 • 4 . 3 0 - 6 . 3 0 P M
DA
Y 1
• S
ES
SIO
N 2
DA
Y 1
• S
ES
SIO
N 2
> E.2 CIRCULAR BUSINESS MODEL DYNAMICS Session Chair: Erik G. Hansen, Johannes Kepler University Linz (JKU)
4.30 p.m. Developing hybrid business models in the reuse and repair sector: a case study Benjamin Tyl, Cyril Baldachino APESA, Tarnos, France
5.00 p.m. Exploring organizational dynamics towards circular-sufficiency-based value creation systems Florian Hofmann Fraunhofer IZM, Berlin, Germany
5.30 p.m. Circularity in business: a framework for assessing the circularity potential of small and medium enterprises (SMEs) and its relation to product lifetime extension Natalia Agathou, Andri Constandinou London Waste and Recycling Board, London, United Kingdom
6.00 p.m. Diffusion of access-based product-service systems: adoption barriers and how they are addressed in practice Vivian S. C. Tunn1, Nancy M. P. Bocken1,2,3, Ellis A. van den Hende1, Jan P. L. Schoormans1
1Faculty of Industrial Design Engineering, TU Delft, Delft, The Netherlands; 2IIIEE, Lund University, Lund, Sweden; 3School of Business and Management, Lappeenranta University of Technology, Lappeenranta, Finland
WEDNESDAY SEPTEMBER 18 / 7.00 – 9.00 PM
RECEPTION AT SEMINARIS
Join us for the welcome reception at the conference venue on Wednesday evening, where selected NGOs, initiatives and small companies will be presenting their work from the realm of product lifetimes and the environment.
191918
W O R K S H O P S • T H U R S D A Y , S E P T. 1 9 • 9 . 0 0 - 1 0 . 3 0 A M
DA
Y 2
• W
OR
KS
HO
PS
1 –
5
DA
Y 2
• W
OR
KS
HO
PS
1 –
5
#WORKSHOP 1
Utilising Smart Products and Big Data in Research on Product Lifetimes Eduard Wagner, Technische Universität BerlinErik Poppe, SUSTAINUM Institute for Sustainability Okechukwu Okorie, The University of Exeter The diffusion of digital technology into all parts of the economy, and the ever increasing number of smart products, entail unprecedented amount of generated data. The potential of this data needs to be explored and translated into sustainable solutions. The necessary process includes an understanding of IT infrastructure, data analysis and product design. The process also includes understanding the relationship between digital technologies such as Industry 4.0 and IoT, stakehol-ders and digital intelligence.
#WORKSHOP 2
Extending Lifetimes by Taking the Consumers’ Perspective into Account: A Toolkit to Support Design for Product Care Laura Ackermann, Fachhochschule SalzburgMahana Tuimaka, TU Delft Prolonging a product’s lifetime is one of the main strategies of a Circular Economy, and strategies to encourage repair and maintenance activities conducted by the consumers are needed. We will present a toolkit that aims to support designers in considering product care strategies during their product development process. Product care includes all strategies that extend the lifetime of a product such as repair, maintenance and protective measures (Ackermann, Mugge, & Schoormans, 2018). Unfortunately, strategies on how to implement product care into product and service design are not well-known. The toolkit will be presented as a conference paper during PLATE 2019, and the workshop will give the participants the opportunity to experience the toolkit themselves.
#WORKSHOP 3
Circular Strategies to Prolong Fashion Products’ Lifetime Arianna Nicoletti, Future Forward Fashion e. V.Isabel Ordoñez, Technische Universität Berlin The workshop will demonstrate a range of strategies to prolong the lifetime of specific products within the fashion industry. It will also help to understand constraints and potentials linked to the production areas, materials and design choices in terms of circularity. The workshop methodology combines the guide of “Close the Loop”, developed by Flanders DC and Circular Flanders with workshop methodologies developed by Future Forward Fashion e. V. and Technische Universität Berlin in their educational projects.
#WORKSHOP 4
The Sustainable Smartphone for the Future Thomas Krause and Samuel Waldeck, SHIFT GmbHMarina Proske, Fraunhofer IZM and Technische Universität BerlinJana Rückschloss, Fraunhofer IZM The workshop builds on the existing experiences with modular design (Shift 6m, PuzzlePhone, Fairphone 2, Google ARA) and conceptual ideas (SHIFTmu, neptune). The future smartphone could combine different application areas, modularity could be seen not only as a product design, but as a general manufacturing approach over different device sizes and generations.
#WORKSHOP 5
If Everything was Made from Lego There Would be no Garbage – Hacking Things Modular with Pre-use! Lars Zimmermann and Michi Muchina, OpenCircularity Modularity is a key to a more sustainable world of products and consumption. This workshop will introduce two interesting concepts about "modularity for sustainable circularity". We will discuss "Pre-Use" and "Hacking Modularity". Pre-Use means to use something for something different than it was intended for but in a way that it still works for the initially intended use afterwards. Hacking Modularity points to the idea that the majority of things around us are not modular but approaching things like a hacker can change that at least for some things. After a quick theoretical introduction to these concepts participants will build quick own statues and hacks at the conference venue using pre-use techniques.
WORKSHOPS 9–10.30 AMTHURSDAY, SEPT. 19, 2019
2120
W O R K S H O P S • T H U R S D A Y , S E P T. 1 9 • 9 . 0 0 - 1 0 . 3 0 A M
DA
Y 2
• W
OR
KS
HO
P X
#WORKSHOP X
How to Mobilize Citizens for DurabilityAdèle Chasson, Association Halte à l'Obsolescence Programmée (HOP)Nathan Proctor, Director, U.S. PIRG Campaign for the Right to Repair
With a community of around 40 000 citizens voicing their desire for more durable and repairable products, HOP (Stop Planned Obsolescence) is the main NGO in France focusing on product durability and repair. U.S. PIRG (Public Interest Research Group) is a federation of independent, state-based, citizen-funded organizations that advocate for the public interest. Their Right to Repair campaign aims to give every consumer and small business access to the parts, tools and service information they need to repair products so we can keep things in use and reduce waste.Come and learn how HOP and PIRG managed to put durability on the agenda and build a commu-nity to make products last longer. The workshop will give participants a practical insight into the different ways to involve citizens and build a community around durability.
WORKSHOPS 9–10.30 AMTHURSDAY, SEPT. 19, 2019
Check outadditionalWorkshop X@ Foyer
Room #Cambridge #Oxford #Harvard #Stanford #Princeton
22 23
S E S S I O N 3 • T H U R S D AY, S E P T. 1 9 • 1 1 . 0 0 A M - 1 2 . 3 0 P M S E S S I O N 3 • T H U R S D AY, S E P T. 1 9 • 1 1 . 0 0 A M - 1 2 . 3 0 P M
DA
Y 2
• S
ES
SIO
N 3
DA
Y 2
• S
ES
SIO
N 3
> A.3 SUSTAINABLE CONSUMPTION AND LIFETIME ENHANCING PRACTICES I Session Chair: Riikka H. Räisänen, University of Helsinki
11.00 a.m. Modelling of useful life based on social practices Tamina N. Hipp Zentrum Technik und Gesellschaft, Technische Universität Berlin, Berlin, Germany
11.30 a.m. Emotional fashion: understanding youth generations and what values drive their consumer behaviors Rebekah Matheny, Tiffany Lau The Ohio State University, United States of America
12.00 p.m. Get your phone out of the drawer: revealed and stated preferences Vered Blass1, Anat Tchetchik2, Austin Nichols3
1Tel Aviv University, Tel Aviv, Israel; 2Bar-Ilan University, Ramat Gan, Israel; 3Abt Associates, Rockville, United States of America
> B.3 STRATEGIES AND STRUCTURES TO FACILIATE REPAIR I Session Chair: Max Marwede, Technische Universität Berlin
11.00 a.m. Closed for repair: product design tactics to discourage product repair Miles Park University of New South Wales, Sydney, Australia
11.30 a.m. Information requirements to enable the repair or upgrade of products: the case study of computers in EU policy tools and other voluntary labels Felice Alfieri, Mauro Cordella, Javier Sanfelix Joint Research Centre, European Commission, Bruxelles, Belgium
12.00 p.m. Developing repairability criteria for energy related products Ellen Bracquené1, Jef Peeters1, Yoko Dams2, Jan Brusselaers2, Joost Duflou1, Wim Dewulf1
1KU Leuven, Leuven, Belgium; 2VITO, Belgium
> C.3 MATERIAL INNOVATION Session Chair: Laura Ackermann, Fachhochschule Salzburg
11.00 a.m. Material eco-replacement: correlating product lifespan and material durability when evaluating the substitution of plastic with novel circular materials Romina Santi1, Agnese Piselli2, Barbara Del Curto2
1Design Department, Politecnico di Milano, Milan, Italy; 2Chemistry, Materials and Chemical Engineering “G. Natta” Department, Politecnico di Milano, Milan, Italy
11.30 a.m. Circular design of composite products: a preliminary framework based on insights from literature and industry Jelle Joustra, Bas Flipsen, Ruud Balkenende TU Delft, Delft, The Netherlands
12.00 p.m. Self-healing materials within a circular economy Merryn Haines-Gadd, Fiona Charnley, Adriana Encinas-Oropesa Cranfield University, United Kingdom
> D.3 ASSESSMENT QUESTIONS EXEMPLIFIED BY EEE CASES II Session Chair: Pål Strandbakken, Oslo Metropolitan University
11.00 a.m. The role of unused storage phases (hibernation) in the overall lifetime of a mobile phone – an evaluation of simulation-based scenarios including their environmental impacts Simon Glöser-Chahoud1, Matthias Pfaff2
1Karlsruhe Institute of Technology, Karlsruhe, Germany; 2Fraunhofer ISI, Karlsruhe, Germany
11.30 a.m. What is my share? Using market data to assess the environmental impacts of secondary consumption Tamar Makov1, Paul Wolfram1, Vered Blass2
1Yale University, New Haven, United States of America; 2Tel Aviv University, Tel Aviv, Israel
12.00 p.m. Influence of usage patterns on ecoefficiency of battery storage systems for electromobility and home storage Johanna F. May, Olga Kanz, Philip Schürheck, Niklas Fuge, Eberhard Waffenschmidt TH Köln, Cologne, Germany
> E.3 CIRCULAR BUSINESS MODELS IN DIFFERENT INDUSTRIES SessionChair:PaulAtkinson,SheffieldHallamUniversity
11.00 a.m. Towards a circular photovoltaic economy: the role of service-based business models Lars Strupeit, Nancy Bocken Lund University, Lund, Sweden
11.30 a.m. Instances of the circular economy in Australian commercial furniture production Mariano Ramirez University of New South Wales, Sydney, Australia
12.00 p.m. Co-creating circular product-service systems for long-lasting washing machines Sonja S. van Dam, Conny Bakker, Thomas Hazenoot TU Delft, Delft, The Netherlands
24 25
K E Y N O T E 2 A N D P O S T E R S E S S I O N • T H U R S D AY, S E P T. 1 9 • 1 . 3 0 - 4 . 3 0 P M
DA
Y 2
• T
HU
RS
DA
Y
CO
NF
ER
EN
CE
PR
OG
RA
MM
E
KEYNOTE 2 AND POSTER PITCHES
What are the „Poster Pitch Sessions“? To facilitate interaction and networking each poster is presented in a short pitch by the author. The poster pitches happen in two parallel sessions. Thus participants are able to hear details about half of the posters before visiting the poster session and engage in discussion with the poster authors on the ground floor.
The planned assignment of posters to poster pitch A or B is marked in the overview of posters in this final programme.
1.30 p.m. Keynote 2: The End of Life of Fast Fashion Prof. Heike Derwanz Carl von Ossietzky Universität Oldenburg
2.30 p.m. Poster Pitches A / B Room A Cambridge / Room B Oxford
3.30 p.m. Poster Session @ Coffee break
26 27
P O S T E R S E S S I O N • T H U R S D AY, S E P T. 1 9 • 2 . 3 0 - 4 . 3 0 P M P O S T E R S E S S I O N • T H U R S D AY, S E P T. 1 9 • 2 . 3 0 - 4 . 3 0 P M
DA
Y 2
• P
OS
TE
R S
ES
SIO
N
DA
Y 2
• P
OS
TE
R S
ES
SIO
N
#01 The „making“ of product lifetime: the role of consumer practices and perceptions for longevity Vivian Frick, Melanie Jaeger-Erben, Tamina Hipp Zentrum Technik und Gesellschaft, Technische Universität Berlin, Berlin, Germany
#02 A product lifetime model for assessing the effect of product lifetime extension behavior by different consumer segments Masahiro Oguchi, Tomohiro Tasaki, Atsushi Terazono, Daisuke Nishijima National Institute for Environmental Studies, Tsukuba-City, Japan
#03 Multifunctional neglect leads to the purchase of redundant devices Tamar Makov, George Newman Yale University, New Haven, United States of America
#04 Understanding consumer disposal behaviour with food to go packaging in a move to circular, zero waste packaging solutions Nikki Clark, Rhoda L. Trimingham, Garrath T. Wilson Loughborough University, Loughborough, United Kingdom
#05 Circular design tools: (how) do they understand the consumer? Juana Camacho-Otero1, Anneli Selvefors2, Casper Boks1, Ida N. Pettersen1
1Norwegian University of Science and Technology, Trondheim, Norway; 2Chalmers University of Technology, Goteborg, Sweden
#06 Centres for urban remanufacture: lessons from the CURE pathfinder project Isabel Ordoñez1, Paul Mählitz1, Oskar Rexfelt2, Beatrice Decker1, Susanne Rotter1, Dina Padalkina3, Shea Hagy2
1Technische Universität Berlin, Berlin, Germany; 2Chalmers University of Technology, Goteborg, Sweden; 3Circular Berlin, Berlin, Germany
#07 Informal e-waste recycling: Seelampur, in North East Delhi Miles Park, Alankrita Soni University of New South Wales, Sydney, Australia
#08 Lifetime extension by design and a fab lab level digital manufacturing strategy: tablet case study Jose Ospina1, Paul Maher1, Anne Galligan1, John Gallagher2, Dermot O'Donovan2, Gerhard Kast3, Karsten Schischke4, Niko Balabanis5
1MicroPro, Dublin, Ireland; 2GMIT Letterfrack, Galway, Ireland; 3ReUse e.V., Berlin, Germany; 4Fraunhofer Institute for Reliability and Microintegration IZM, Berlin, Germany; 5Grant4Com, Oulu, United Kingdom
#09 Generation scrap: designing with waste to transform the carpet industry Rebekah Matheny1, Royce Epstein2
1Ohio State University, Columbus, United States of America; 2Mohawk Group, New York City, United States of America
#10 Accessing sustainability through the wardrobe Verena Strebinger, Heike Derwanz Carl von Ossietzky Universität Oldenburg, Oldenburg, Germany
#11 Estimation of lifespan distribution of motorcycles in Vietnam Daiki Kurogi1, Shoki Kosai1,4, Thai P. Lai2, Duc Q. Nguyen3, Genya Murakami1, Eiji Yamasue1
1Ritumeikan University, Japan; 2Vietnam Register, Hanoi, Vietnam; 3Hanoi University of Science and Technology, Hanoi, Vietnam; 4Kyoto University, Kyoto, Japan
#12 Apparel as a resource – results of a literature review and laboratory textile tests of garments subjected to the laundry care process Claudia Heller1, Monika Fuchs1, Paul U. Thamsen2
1Hochschule für Technik und Wirtschaft Berlin, Berlin, Germany; 2Technische Universität Berlin, Berlin, Germany
#13 Time in markets: using data mining technologies to measure product lifecycles Erik Poppe SUSTAINUM – Institute for Sustainable Economy, Berlin, Germany
#14 Test strategy for thermo-mechanical ageing effects in polymeric materials Marius van Dijk1, Martin Schneider-Ramelow2
1Fraunhofer Institute for Reliability and Microintegration IZM, Berlin, Germany; 2Research Institute Microperipheric Technologies, Technische Universität Berlin, Berlin, Germany
#15 Fun for life – designerly opportunities for lifetime extension in toys Els Du Bois, Lore Veelaert, Brecht Vermeesch, Sander Zelck, Dirk Van Gogh Faculty of Design Sciences, University of Antwerp, Antwerp, Belgium
#16 Promoting life cycle thinking: a training of public officers for green public procurement Chiara Scalabrino1, Antonio Navarrete Salvador2, Jose M. Oliva Martinez2
1Regional Environmental Protection Agency of Liguria, Genoa, Italy; 2Department of Didactics, University of Cádiz, Cádiz, Spain
#17 The CE analyst – a tool to estimate the environmental benefits of circular business strategies Rainer Pamminger, Stephan Schmidt, Wolfgang Wimmer Vienna University of Technology, Vienna, Austria
#18 Analyzing circular economy aspects in ISO type I ecolabelling criteria Victoria Pérez-Belis, María D. Bovea, Valeria Ibáñez-Forés, Marta Braulio-Gonzalo Universitat Jaume I, Valencia, Spain
#19 Prospects for increasing the share of longer lasting products in consumer durables markets Deepti Mahajan, Tim Cooper, David Smith Nottingham Trent University, Nottingham, United Kingdom
POSTERS
Room # Cambridge # Oxford
28 29
S E S S I O N 4 • T H U R S D AY, S E P T. 1 9 • 4 . 3 0 - 6 . 3 0 P M S E S S I O N 4 • T H U R S D AY, S E P T. 1 9 • 4 . 3 0 - 6 . 3 0 P M
DA
Y 2
• S
ES
SIO
N 4
DA
Y 2
• S
ES
SIO
N 4
> A.4 CLOTHING CONSUMPTION AND THE LIFETIMES OF TEXTILES Session Chair: Irene Maldini, Amsterdam University of Applied Sciences
4.30 p.m. Global and local clothing habits Kirsi Laitala, Ingun G. Klepp Oslo Metropolitan University, Oslo, Norway
5.00 p.m. Wardrobe sizes and clothing lifespans Ingun G. Klepp, Kirsi Laitala, Vilde A. Rydal Haugrønning Consumption Research Norway (SIFO), Oslo Metropolitan University, Oslo, Norway
5.30 p.m. Building a sustainable wardrobe: Quality over quantity? – Survey of students wardrobes and consumption habits Johanna V. Valkola, Riikka H. Räisänen University of Helsinki, Helsinki, Finland
6.00 p.m. New-old jeans or old-new jeans? Contradictory aesthetics and sustainability paradoxes in young people’s clothing consumption Rebecca Collins University of Chester, United Kingdom
> B.4 STRATEGIES AND STRUCTURES TO FACILIATE REPAIR II Session Chair: Bas Flipsen, TU Delft / iFixit GmbH
4.30 p.m. Computer vision and self-learning systems for repair, reuse and recycling Jef Peeters, Wouter Sterkens, Ellen Bracquené, Hans Ramon, Wim Dewulf KU Leuven, Leuven, Belgium
5.00 p.m. Exploring social, economic and environmental consequences of collaborative production: the case of bike repair maker spaces in four European countries Jagdeep Singh, Matthias Lehner, Julia Winslow, Yuliya Voytenko Palgan, Oksana Mont IIIEE, Lund University, Lund, Sweden
5.30 p.m. Designing for garment repair-ability: an exploration of future possibilities Marium Durrani1, Kirsi Niinimäki1, Shirley Mclauchlan2
1School of Arts, Design and Architecture, Aalto University, Espoo, Finland; 2School of Design/ Textile, Edinburgh University, Edinburgh, United Kingdom
6.00 p.m. Cigar box guitar forums: fostering competency, creativity and connectedness in communities of practice and performance Paul Atkinson Sheffield Hallam University, Sheffield, United Kingdom
> C.4 LIFETIME OF ELECTRIC AND ELECTRONIC EQUIPMENT Session Chair: Colin Fitzpatrick, University of Limerick
4.30 p.m. Has the durability of white goods changed between 1998 and 2017? In what direction and why? Pål Strandbakken Oslo Metropolitan University, Oslo, Norway
5.00 p.m. Challenges in obsolescence management and system engineering using the example of the German supplier industry Janis Winzer1, Eduard Wagner2, Stephan Benecke1, Nils F. Nissen1, Klaus-Dieter Lang1,2
1Fraunhofer IZM, Berlin, Germany; 2Technische Universität Berlin, Berlin, Germany
5.30 p.m. Trialling the preparation for reuse of B2C ICT WEEE in Ireland Damian Coughlan1, Martin Reddy2, Colin Fitzpatrick1
1University of Limerick, Limerick, Ireland; 2PhoenixRM, Dublin, Ireland
6.00 p.m. Benefits and pitfalls of better lifetime data – the case of batteries in mobile electronic equipment Christian Clemm1, Johanna Emmerich2, Victor Höller1 , Nils F. Nissen1, Klaus-Dieter Lang1,2
1Fraunhofer IZM, Berlin, Germany; 2Technische Universität Berlin, Berlin, Germany
> D.4 LEGAL FRAMEWORK FOR PRODUCT LONGEVITY Session Chair: Tim Cooper, Nottingham Trent University
4.30 p.m. Sustainable product lifecycles: a systemic approach to the regulation of e-waste Maja Van Der Velden1, Mark Taylor3,1, Martin Oteng-Ababio2
1University of Oslo, Oslo, Norway; 2Fafo Institute, Oslo, Norway; 3University of Ghana, Accra, Ghana
5.00 p.m. The influence of product lifetime labelling on purchase decisions Kathleen Jacobs Alanus University of Arts and Social Sciences, Germany
5.30 p.m. How can US law extend product lifespans? Philip B. White Arizona State University, Tempe, United States of America
6.00 p.m. Is there a need to legally define and criminalize practices of premature obsolescence? Anaïs Michel KU Leuven and UCL, Bruxelles and Louvain-la-Neuve, Belgium
30 31
S E S S I O N 4 • T H U R S D AY, S E P T. 1 9 • 4 . 3 0 - 6 . 3 0 P M
DA
Y 2
• S
ES
SIO
N 2
DA
Y 2
• S
ES
SIO
N 4
> E.4 CIRCULAR BUSINESS MODEL DEVELOPMENT IN FASHION AND TEXTILES Session Chair: Cosette Armstrong, Oklahoma State University
4.30 p.m. Optimizing second hand clothing stores based on consumer preferences Marie van den Bergh, Mariana Itza de Miguel, Jan Schoormans TU Delft, Delft, The Netherlands
5.00 p.m. Circular fashion archetypes: a feasibility study exploring how maker spaces might support circular innovation, within the context of fashion and textiles Jen Ballie Univeristy of Dundee / V&A Dundee, Dundee, United Kingdom
5.30 p.m. Demystifying process-level scalability challenges in fashion remanufacturing business models Rudrajeet Pal Swedish School of Textiles, University of Borås, Borås, Sweden
6.00 p.m. Towards developing a framework for circular business model scalability analysis: evidences from fashion retail value chain Emelie Hultberg1, Rudrajeet Pal1, Erik Sandberg2
1Swedish School of Textiles, University of Borås, Borås, Sweden; 2Department of Management and Engineering, Linköping University, Sweden
THURSDAY, SEPTEMBER 19 / 7.00 – 10.00 PM
NETWORKING DINNER AT SEMINARIS
The networking dinner promises to be a lively highlight of the PLATE 2019. Don't miss the opportunity to mingle with experts from a wide range of disciplines and make the most of your conference participation.
32 33
#WORKSHOP 6
Proactive Obsolescence Management – Solution to Supply Chain DisruptionsBjoern Bartels, AMSYS GmbH – Applicable Management SYStems
Costly supply bottlenecks arise when a component, material, tool, process, assembly, software or standard necessary for the production or repair of a company‘s own product is no longer available from the manufacturer. This is known as ‘obsolescence‘. That is why it is becoming increasingly important to practice active management to reduce or completely avoid unplanned costs. Within a world café atmosphere we will discuss topics like Technical Issues & Solutions, Data Management and Managerial Tasks for an active Obsolescence Management.
#WORKSHOP 7
Make Your Own Experience with Circular Design – Use of the Simulation Game SIMPLYCYCLE in Teaching Sonja Eser, Fachhochschule Salzburg
A change of mindset is needed to find our way into the Circular Economy. SIMPLYCYCLE is a simu-lation game that was designed to help develop a new thinking and personal competences for setting the course for cyclical metabolism. It teaches principles of Circular Design and is a practical tool to help participants to understand how to bring Circular Design into practice and to see the bigger picture and premature obsolescence, such as product reliability and durability.
DA
Y 3
• W
OR
KS
HO
PS
6 –
10
#WORKSHOP 8
Hands-on – Product Lifetime Expectations for Electronic TextilesRachael Wickenden, Nottingham Trent University
Electronic textiles are being designed and manufactured in a way that limits product lifetime. This workshop offers participants the opportunity to examine hands-on a range of products including the Levi’s® Jacquard™ jacket and discuss lifetime expectations and consequent design or business strategies, that could improve product sustainability.
#WORKSHOP 9
How Long Is Enough? – Testing for Premature Obsolescence Anton Berwald and Olaf Wittler, Fraunhofer IZM
E-waste generation reached 48.5 million tons in 2018 and it is considered the fastest growing waste stream in the world. On a global level, only 20 % of e-waste is treated properly and few data is available for the rest. One of the main principles of the Circular Economy is to keep products and materials in use as long as possible and therefore to prevent "premature obsolescence". This workshop will discuss how robust product test procedures can support the development of more durable and longer lasting products by lowering information asymmetries between manufacturers and consumers. These test procedures should take into account the main issues of product failures and premature obsolescence, such as product reliability and durability.
#WORKSHOP 10
Fix the World: Repair Policy, Design and Critical Raw Materials Jana Rückschloss, Fraunhofer IZMKyle Wiens, iFixit
Pop-up repair workshop. Hands-on disassembly of electronic products. Train attendees on repaira-bility scoring. Identify strategic opportunities for advancing repair-friendly policies and immediate actionable tasks. Discuss right to repair and where repair-friendly laws and policy proposals are moving.
DA
Y 3
• W
OR
KS
HO
PS
6 –
10
WORKSHOPS 9–10.30 AMFRIDAY, SEPT. 20, 2019
W O R K S H O P S • F R I D A Y , S E P T. 2 0 • 9 . 0 0 - 1 0 . 3 0 A M
Room #Cambridge #Oxford #Harvard #Stanford #Princeton
34 35
S E S S I O N 5 • F R I D AY, S E P T. 2 0 • 1 1 . 0 0 A M - 1 2 . 3 0 P M S E S S I O N 5 • F R I D AY, S E P 2 0 • 1 1 . 0 0 A M - 1 2 . 3 0 P M
DA
Y 3
• S
ES
SIO
N 5
DA
Y 3
• S
ES
SIO
N 5
> A.5 PRODUCT LIFETIMES AT THE PRODUCTION- CONSUMPTION INTERFACE Session Chair: Ingun G. Klepp, Oslo Metropolitan University
11.00 a.m. Too many shoes? An exploratory study of footwear and sustainability Naomi J. Braithwaite, Rose Marroncelli Nottingham Trent University, Nottingham, United Kingdom
11.30 a.m. Exploring the role of design styles on the acceptance of refurbished products: a focus on the neo-retro style Theresa S. Wallner, Lise Magnier, Ruth Mugge TU Delft, Delft, The Netherlands
12.00 p.m. Planned obsolescence in smartphones? Insights from benchmark testing Tamar Makov1, Colin Fitzpatrick2
1Yale University, New Haven, United States of America; 2University Of Limerick, Limerick, Ireland
> B.5 DESIGN FOR SUSTAINABLE PRODUCTS I Session Chair: Rudrajeet Pal, University of Borås
11.00 a.m. A multi-hierarchical “Design for X” framework for accelerating circular economy Alessio Franconi1, Laura Badalucco1, David Peck2, Nabil Nasr3
1Università Iuav di Venezia, Venice, Italy; 2TU Delft, Delft, The Netherlands; 3Rochester Institute of Technology, Rochester, United States of America
11.30 a.m. Ten golden rules of design for sustainability Conny Bakker TU Delft, Delft, The Netherlands
12.00 p.m. Design competencies for a circular economy Deborah X. Sumter, J. I. J. C. De Koning, Cornelia A. Bakker, Abraham R. Balkenende TU Delft, Delft, The Netherlands
> C.5 WASTE AS A NEW PRODUCT Session Chair: María D Bovea, Universitat Jaume I
11.00 a.m. WOT? Insights into the flows and fates of e-waste in the UK Alison Stowell1, Dmitry Yumashev1, Sarah Downes2
1Pentland Centre for Sustainability in Business, Lancaster University, Lancaster, United Kingdom; 2Repic Ltd., Bury, Lancashire, United Kingdom
11.30 a.m. Understanding and practicing wood waste qualities in Norway: a case of adaption work in circular bioeconomy Atle W. Hegnes, Lone R. Gobakken, Eirik Nordhagen Norwegian Institute of Bioeconomy Research, Ås, Norway
12.00 p.m. The legend of the circular tire: lessons learned from collaboration in a tire business ecosystem Derek L. Diener1, Thomas Nyström1, Ann-Charlotte Mellquist1, Christian Jonasson1, Simon Andersson2 1RISE – Research Institutes of Sweden, Goteborg, Sweden; 2IVL Svenska Miljöinstitutet, Goteborg, Sweden
> D.5 ASSESSMENT QUESTIONS EXEMPLIFIED BY EEE CASES III Session Chair: Nils F. Nissen, Fraunhofer IZM
11.00 a.m. Assessing potential environmental benefits of planned product obsolescence based on individual user behaviour by life cycle assessment and scenario analysis Thomas Betten1, Daniel Wehner2, Robert Hämmerl3, Ann-Kathrin Briem1, Moqian Zheng4
1Institue for Acoustics and Building Physics, University of Stuttgart, Stuttgart, Germany; 2Fraunhofer IBP, Stuttgart, Germany; 3Institute of Human Factors and Technology Management, University of Stuttgart, Stuttgart, Germany; 4University of Arizona, Tuscon, United States of America
11.30 a.m. Consuming the million-mile electric car Matthew Cook1, Stephen Potter1, Maurizio Catulli2, Alan M. Valdez1
1Open University, Milton Keynes, United Kingdom; 2University of Hertfordshire, Hatfield, United Kingdom
12.00 p.m. Constructing an assessment framework for environmental and economic impacts of product price increase associated with product lifetime extension design policy Daisuke Nishijima1, Keisuke Nansai1, Masahiro Oguchi1, Shigemi Kagawa2
1Nationanl Institute for Environmental Studies (NIES), Tsukuba, Japan; 2Kyushu University, Fukuoka, Japan
> E.5 PREREQUISITES FOR CIRCULAR BUSINESS MODEL FORMATION Session Chair: Florian Hofmann, Fraunhofer IZM
11.00 a.m. Circular economy of plastics: analysis of flows and stocks of plastic in Europe Wan-Ting Hsu, Teresa Domenech, Will McDowall Institute for Sustainable Resources, University College London, London, United Kingdom
11.30 a.m. Circular economy business requirements Leendert J. de Olde, Hans van der Wel, Helle Ullerup Royal Philips, Eindhoven, The Netherlands
12.00 p.m. Co-creation – a facilitator for circular economy implementation? A case study in the kitchen industry Giliam Dokter, Sofie Andersson, Liane Thuvander, Ulrike Rahe Chalmers University of Technology, Goteborg, Sweden
36 37
S E S S I O N 6 • F R I D AY, S E P T. 2 0 • 0 1 . 3 0 - 0 3 . 3 0 P M S E S S I O N 6 • F R I D AY, S E P T. 2 0 • 0 1 . 3 0 - 0 3 . 3 0 P M
DA
Y 3
• S
ES
SIO
N 6
DA
Y 3
• S
ES
SIO
N 6
> A.6 CONSUMERS IN A CIRCULAR ECONOMY Session Chair: Daniel Guzzo, University of São Paulo
1.30 p.m. Behavioral change for circular electronics Keshav Parajuly1,3, Ruediger Kuehr1, Orla Muldoon2, Colin Fitzpatrick3
1United Nations University, Bonn, Germany; 2Dept. of Psychology, University of Limerick, Limerick, Ireland; 3Dept. of Electronic & Computer Engineering, University of Limerick, Limerick, Ireland
2.00 p.m. Consumers’ engagement in the circular economy: results from a large-scale behavioural experiment and survey in the EU James Suter1, Annette Cerulli-Harms1, Sara Kettner2
1London Economics Limited, London, United Kingdom; 2ConPolicy, Berlin, Germany
2.30 p.m. Online collaborative clothing consumption = “business as usual”? A look at female practitioners of redistributed ownership Cosette M. Joyner Armstrong Oklahoma State University, Stillwater, United States of America
3.00 p.m. Alternative consumption: a circular economy beyond the circular business model Isaac A. Ortega Alvarado, Ida Nilstad Pettersen, Thomas Berker Norwegian University of Science and Technology, Trondheim, Norway
> B.6 DESIGN FOR SUSTAINABLE PRODUCTS II Session Chair: Miles Park, University of New South Wales
1.30 p.m. Again and again: triple perspective on design and repair Nazlı Özkan, Renee Wever Linköping Universtiy, Sweden
2.00 p.m. Designing useful fashion: a new conceptual model of the garment lifetime Jo Cramer RMIT University, Melbourne, Australia
2.30 p.m. Hide and seek – a systemic approach to sustainability in product Max Marwede, Eduard Wagner, Melanie Jaeger-Erben Technische Universität Berlin, Berlin, Germany
3.00 p.m. Modularity as one principle in sustainable technology design – a design case study on ICT Ines P. Junge University of Oslo, Oslo, Norway
> C.6 EXPLORING CONSUMER-PRODUCT- RELATIONS Session Chair: Sonja S. van Dam, TU Delft
1.30 p.m. Reconsidering the determinants of longer relationships with everyday products: a five point framework Clare R. Green1,2
1École des hautes études en sciences sociales, Paris, France; 2ISD Rubika, Valenciennes, France
2.00 p.m. How can design stimulate people to take care of products? – The development of a toolkit for designers Laura Ackermann1,2, Mahana Tuimaka2, Anna Pohlmeyer2, Ruth Mugge2
1Fachhochschule Salzburg, Salzburg, Austria; 2TU Delft, Delft, The Netherlands
2.30 p.m. A comparative and exploratory study of toy products in the circular economy Matthew Alan Watkins, Ana Mestre Nottingham Trent University, Nottingham, United Kingdom
3.00 p.m. The story of product quality and its present day meaning Deepti Mahajan, Tim Cooper, David Smith Nottingham Trent University, Nottingham, United Kingdom
> D.6 ASSESSMENTS FROM MICRO AND MACRO PERSPECTIVES Session Chair: Karsten Schischke, Fraunhofer IZM
1.30 p.m. The economic implications of increased product longevity Tim Cooper, Saira Qasim Nottingham Trent University, Nottingham, United Kingdom
2.00 p.m. Circular society – from a self-destructive to a self-sustaining metabolism Melanie Jaeger-Erben Technische Universität Berlin, Berlin, Germany
2.30 p.m. Focus on reparability Joerg Longmuss1, Christian Dworak2
1Sustainum Institute Berlin, Berlin, Germany; 2BSH Hausgeräte GmbH, Munich, Germany
3.00 p.m. Transforming Berlin towards a community-led circular economy Georg Hubmann1,2, Dina Padalkina1,2
1Technische Universität Berlin, Berlin, Germany; 2Circular Berlin, Berlin, Germany
38 39
S E S S I O N 6 • F R I D AY, S E P T. 2 0 • 0 1 . 3 0 - 0 3 . 3 0 P M S E S S I O N 6 • F R I D AY, S E P T. 2 0 • 0 1 . 3 0 - 0 3 . 3 0 P M
DA
Y 3
• S
ES
SIO
N 2
DA
Y 3
• S
ES
SIO
N 2
> E.6 POLICIES FOR THE CIRCULAR ECONOMY Session Chair: Janis Winzer, Fraunhofer IZM
1.30 p.m. Ecodesign spinning towards the circular economy – the contribution of new standards on resource efficiency Moritz-C. Schlegel1, Catriona McAlister2, Christoforos Spiliotopoulos3
1Federal Institute for Materials Research and Testing (BAM), Berlin, Germany; 2Sea Green Tree, Barcelona, Spain; 3European Environmental Citizens’ Organisation for Standardisation (ECOS), Bruxelles, Belgium
2.00 p.m. Taking producer responsibility out of waste law: a new legal framework for the circular economy Eléonore Maitre-Ekern University of Oslo, Oslo, Norway
2.30 p.m. How do the revisions of the Nordic and EU ecolabel criteria reflect circular economy? Johanna M. Suikkanen, Ari Nissinen Finnish Environment Institute, Helsinki, Finland
3.00 p.m. Circular economy policy at a crossroads: driving business models for durable products, or enabling faster recycling of short-lived products? Katherine Whalen, Leonidas Milios International Institute for Industrial Environmental Economics, Lund University, Lund, Sweden
KEYNOTE 3 AND CLOSING
3.45 p.m. Keynote 3: The Evolution of Implementing a Circular Economy Prof. Jacqueline M. Cramer Utrecht University, Utrecht Sustainability Institute, The Netherlands
4.30 p.m Conference Closing Dr. Nils F. Nissen Prof. Melanie Jaeger-Erben Conference Chairs
40 41
GE
NE
RA
L I
NF
OR
MA
TIO
N
GE
NE
RA
L I
NF
OR
MA
TIO
N
# DIETARY REQUIREMENTS All food will be served as a buffet and all vegetarian, vegan, and/or gluten-free food will be clearly marked as such in English. When in doubt, please consult one of the chefs serving the food, who will be able to give you detailed information.
# CONFERENCE OFFICEThe conference office will be available at the registration desk throughout the conference. We are there to help you, so do not hesitate to contact us if you have questions or need help with finding your way around, printing your train tickets, or interpreting the menu.
# INTERNET ACCESSThe Seminaris Hotel is providing all conference delegates with complementary wireless internet access throughout the conference from September 18, 1 p.m. to September 20, 5 p.m.. You will find the access code at the registration desk.
# TECHNICAL EQUIPMENT FOR PRESENTATIONSUsing personal laptops for presentations is not possible. All speakers are kindly asked to bring a flash drive with their presentation to the session room during the break directly prior to their session, so that the technical support staff can copy the file onto the presentation laptop. Please arrive ten minutes before the start of the session.
# CONFERENCE LANGUAGE AND PROCEEDINGSThe official language of all presentations is English. The conference proceedings are available for download. We kindly ask you to download them either before or after the event in order to avoid jammed lines during the conference. The conference proceedings consist of two parts:
1. Official Conference Proceedings (ISBN to follow)All full papers that were handed in for oral or poster presentations will be published as Conference Proceedings with an ISBN and DOI by the conference organizers. The publisher foreseen for the proceedings is Universitätsverlag TU Berlin, Germany.
2. Publication of individual papers in scientific journals (details to follow)As was the case at PLATE 2017, participants will get the opportunity to publish their work in relevant scientific journals as several special issues around product lifetime and the environment will be drafted and announced after the conference. The conference chairs are currently negotiating terms of publication with various journals.
# REGISTRATION FEES
Regular € 680Student € 480Additional conference dinner for accompanying persons € 40
The registration fee includes all lunches, daytime refreshments, evening events, and WiFi access for everyone. Student fees are available for undergraduate and master as well as PhD students.
# CONFERENCE VENUE & ACCOMMODATIONThe PLATE Conference will be held at the Dahlem Cube Seminaris Hotel. The conference centre in the shape of a glass cube is a masterpiece of modern architecture by Helmut Jahn, Chicago. It is situated in the southwest of Berlin, in the district of Dahlem.
Seminaris CampusHotel BerlinTakustraße 39 | 14195 Berlin , GermanyPhone: +49 30 557797-0 | Fax: +49 30 557797-100www.seminaris.de/hotels/seminaris-campushotel-berlin.html
# LUNCH AND COFFEE BREAKSCoffee breaks will be held outside the main conference room on the second floor, except for Thursday afternoon, when it will move to the poster exhibition on the ground floor. Lunch will be provided both there and at the restaurant of the Seminaris hotel.
GENERAL INFORMATION
42 434242 4343
GE
NE
RA
L I
NF
OR
MA
TIO
N
GE
NE
RA
L I
NF
OR
MA
TIO
N
SIDE EVENTS
We have taken great pains to make PLATE 2019 a »green event« in every sense of the word. To give but a few examples:
• All printed matter will be printed on eco-certified materials• All conference materials are produced at exact numbers to avoid waste• The buffet choices at the conference venue are predominantly seasonal, regionally
sourced, organically produced with as little packaging as possible. There is a clear focus on vegetarian dishes
• All articles are produced and printed in an eco-friendly manner • Choice of environmentally conscious cooperation partners• A conference venue that can easily be reached by public transport and puts great
emphasis on responsible handling and saving of waste and the use of local products. The house also uses about 50 % renewable energy.
Veggiebag – The reusable alternative to c ommon plastic bags is yours to keep!
Every time you go shopping you return with hands full of thin plastic bags. After having been used once they end up in the rubbish and only live on as a danger to our environment such as the oceans. But what to use instead? Use a reusable bag every time while shopping lose items and avoid non-returnable plastic! Veggiebag is the perfect replacement. Simple, handy and reusable. The fine-meshed machine washable veggiebag is made of RPET. Start today to save plastic bags and contribute actively to the care of our resources.
https://www.veggiebag.net/how-to-use
WEDNESDAY, SEPTEMBER 18 / 7:00 – 9:00 p.m.
Welcome Reception at SeminarisSelected organisations and initiatives will be presenting their projects and be happy to answer your questions. This will deliver the input for exchange at the reception on Wednesday evening, September 18. Weather permitting, the event will be held outside with a BBQ to make the most of Berlin’s legendary but all too short summer.
THURSDAY, SEPTEMBER 19 / 7:00 – 10 p.m.
Networking Dinner at SeminarisOn Thursday night we will again be meeting up at the conference location, this time for a sit-down networking dinner. Catch up with colleagues and make new contacts over dinner and a glass of wine.
FRIDAY - SUNDAY, SEPTEMBER 20-22, 2019
Post-conference: The Fixfest Festival 2019All PLATE participants are invited to visit the Fixfest – a festival to celebrate, connect and strengthen the internationally growing repair and maker movement, hosted by the Technische Universität Berlin.
The Fixfest starts right after the PLATE and gives the opportunity to immerse oneself deeper into topics around repair and making, reparability of products, the right to repair, sustainable product consumption, and the like. It will provide a place where repair people meet product designers and manufacturers, where scientists can share their knowledge with policymakers and game changers, where entrepreneurs get in touch with new bottom-up technologies and where you can join a repair café to fix your stuff in exactly the same place – this is the very unique character of the second international Fixfest Un-/Conference for the first time in Berlin.
https://reparatur-festival.runder-tisch-reparatur.de/fixfest2019/
44
IMPRINT
IMP
RIN
T
PLATE 2019 Gustav-Meyer-Allee 25c / o Fraunhofer IZM 13355 Berlin, Germany
Phone: +49 30 46403137 Fax: +49 30 46403211
[email protected] www.plateconference.org
Professional mcc Agentur für Kommunikation GmbH
Conference Organiser Phone: +49 30 61288611
Email: [email protected]
www.mcc-events.de
Picture credits marigold_88 / istockphoto.com (cover, background); TU Delft (6,21,39)
Seminaris Campus Hotel Berlin (8,17,31); Right 3 / Adobe Stock (10); Uni Münster (24)
