Finally, a flashing membrane specifically engineered for a broad temperature range!As part of the TYPAR® Weather Protection System, Flashing AT will provide protection against moisture penetration at the window, doors and thru-wall entry points. Count on maximum adhesion to OSB, plywood, aluminum, vinyl and the weather resistive barrier - even in extreme temperature conditions.
Features & Benefits✓ Suitable for installation down to 0°F
✓ Thermally stable up to 180°F
✓ Capable of adhering to wet surfaces
✓ Exceeds current AAMA 711 standards
✓ Self-sealing around nail penetrations
✓ Split poly backing for easy install
✓ No primer required
✓ No VOC, NFCC or CFC
✓ 2-year shelf life
✓ 10-year limited warranty**Flashing AT is part of 10-year limited warranty when used in conjuntion with the complete TYPAR Weather Protection System. See the online warranty for full details.
LOW TEMP HIGH TEMPSUPERIOR PERFORMANCE
70 Old Hickory Blvd., Old Hickory, TN 37138 USA+1 (615) 847 7216TYPAR.com
The information contained herein is to the best of our knowledge accurate and reliable and is provided for the user’s assessment and verification. However, since the circumstances and conditions under which such information and the products discussed can be used may vary and are beyond our control, we make no warranty, expressed or implied, of a merchantability, fitness or otherwise, or of the results to be obtained, or against patent infringement, and we disclaim all liability from any resulting damage or loss.
TYPAR® is a registered trademark of Polymer Group Inc. © 2014
Literature No: TYPAR FLASHING AT SALES SHEET (5/14)
ROLL SIZE ROLLS/CASE CASES/PALLET4’ x 75’ 12 486’x 75’ 8 489’ x 75’ 4 48
CHARACTERISTIC TEST METHOD RESULTNail Sealability AAMA 711-07 PASS90° Peel Adhesion AAMA 711-07 - Plywood 5.0 lb/in - OSB 3.8 lb/in - Facer 4.6 lb/inMold Growth ASTM G-21 No GrowthApplication Temp. 0°F to 180°FUV Stability 6 months
Flashing AT Sell Sheet_05-2014GBC.indd 1 5/19/14 9:15 AM