Machine finishing
Machine finish is that, a very
smooth paper surface,
created by a machine without
polishing work, only needs a
little hand work to clear the
bur, the part could be finish
and delivery quick soon after
off the machine.
Finishing examples of various type of Prototyping process (Page: 1/10)
WAYKEN RAPID MANUFACTURING CO,. LTD. Web: www.waykenrm.com Email: [email protected]
Your custom prototype manufacturing Service Experts
Finishing examples of various type of Prototyping process (Page: 2/10)
Inner Machined Finish
Exist of cutlery radius will
results radius during CNC
Machining the inner structure
of the model. Our standard
operation will required
choosing different tools for
processing to have the
Radius range from R0.25 to
R3.0. Parts required
clearance radius will
secondary clean by hand
finishing.
WAYKEN RAPID MANUFACTURING CO,. LTD. Web: www.waykenrm.com Email: [email protected]
Your custom prototype manufacturing Service Experts
Smooth Finishing
Common smooth finish
requires to use rough
sandpaper start from 240#,
then 320/400# and finally
600-800# to smooth the
processing marks and burs
on the part.
Highly Polishing
OR Mirror Finishing
Highly polishing or Mirror
Finishing requires the
sanding work start from 320#
sandpapare, then 400-600-
800-1000# and end by1500#,
finally using the polishing
paste to polish. the
processed surface will be
highly smooth without neither
machine line nor sanding
mark which is normally the
required finishing standard
for Vacuum Plating or
Chrome Plating parts.
Finishing examples of various type of Prototyping process (Page: 3/10)
WAYKEN RAPID MANUFACTURING CO,. LTD. Web: www.waykenrm.com Email: [email protected]
Your custom prototype manufacturing Service Experts
Clear Polishing
Acrylic polishing requires the
removal of material and it is
essential to achieve a good
machined finish before hand
polishing,and end by 1500#
sandpaper. finally using
polish plate to do the hand
polishing,The final product is
clear and free of any marks
or scratches with optical
quality finishes .
Vapor Polishing
Vapor polishing can be used
to enhance component
features on materials such as
polycarbonate. Vapor
polishing is ideally suited to
the polishing of small
features and offers
improvements to internal and
external surface finishes.
The process is performed
with a chemical vapor, which
attacks the surface of the
plastic and smoothes it.
Finishing examples of various type of Prototyping process (Page: 4/10)
WAYKEN RAPID MANUFACTURING CO,. LTD. Web: www.waykenrm.com Email: [email protected]
Your custom prototype manufacturing Service Experts
Finishing examples of various type of Prototyping process (Page: 5/10)
Sand Blasting
Before sand blasting will
require a hand sanding
process using sandpaper
start from 240#, then
320/400#, and end up by
600#. Then sand blasting
operations with the glass
sand range from 120# to 180
#. It is the operation of
forcibly propelling a stream of
abrasive material against a
surface under high pressure
to smooth a rough surface,
roughen a smooth surface,
shape a surface, or remove
surface contaminants.
WAYKEN RAPID MANUFACTURING CO,. LTD. Web: www.waykenrm.com Email: [email protected]
Your custom prototype manufacturing Service Experts
Grey Primer Finish
primer is the key to a great-
looking topcoat,When you
plan to use any bright or rich
color as a topcoat, rely on
Grey primer to:
Spray the first layer primer to
the debured part, using putty
to fill the rough surface and
sanding by th e240/320#
later on, afterward spray the
second time, and sanding by
400# , and then end up by
800/1000# sanding to reach
the high smooth, non-marks,
non-oil, tidy surface.
Soft Rubber Painting
This is a clear coating that
was called something like
soft touch paint. It can be
applied as a clear translucent
topcoat over a wide variety of
substrates and basecoats to
produce a lustrous full matte
finish. Ultra soft to the touch,
it feels like expensive suede
or soft leathe.
Finishing examples of various type of Prototyping process (Page: 6/10)
WAYKEN RAPID MANUFACTURING CO,. LTD. Web: www.waykenrm.com Email: [email protected]
Your custom prototype manufacturing Service Experts
Textured Matte Painting
Matt painting provides a
permanent, non-gloss finish.
Eliminates light reflection.
Dry fast and clear. Texture
on the painting surfase is
done according to clients' MT
or YS texture sample
plaques, which is the real
mold texture, in prototype
painting, only refer and close
to the spray dot plaques. A
simple fine spark finish can
be sometimes be created by
lightly blasting the surface.
Very fine finishes can be
produced purely with a
spraying technique.
Gloss Painting
Gloss painting is the most
durable and easiest to clean
of all paint sheens, high-
gloss paint is hard, ultra-
shiny, and light-reflecting.
Products receiving cosmetic
paint are coated with a
polyurethane paint.
Polyurethane paint gives
prototypes and parts extra
resistance to water and
chemicals, as well as a
glossy, professional finish.
We use UV coatings and
Acrylic 1K&2K PU
Automotive Refinishing
coatings from PPG and
DuPont.
Finishing examples of various type of Prototyping process (Page: 7/10)
WAYKEN RAPID MANUFACTURING CO,. LTD. Web: www.waykenrm.com Email: [email protected]
Your custom prototype manufacturing Service Experts
Vacuum Aluminium Plating
Knowed as Vacuum
metallizing is a form of
physical vapor deposition, a
process of combining metal
with a non-metallic substrate
through evaporation. Layer
thicknesses are typically a
few micron and a range of
finishes are possible. The
most common metal used in
vacuum metallization is
aluminum for a variety of
reasons such as cost,
thermodynamic, and
reflective properties.
Chrome Plating
It often referred to simply as
chrome, is a technique of
electroplating a thin layer of
chromium onto a metal or
plastic object. The chromed
layer can be decorative,
provide corrosion resistance,
ease cleaning procedures, or
increase surface hardness.
Sometimes a less expensive
imitator of chrome may be
used for aesthetic purposes.
Finishing examples of various type of Prototyping process (Page: 8/10)
WAYKEN RAPID MANUFACTURING CO,. LTD. Web: www.waykenrm.com Email: [email protected]
Your custom prototype manufacturing Service Experts
Brush Finishing
Brushed or dull polished
metal is metal with a
unidirectional satin finish. It is
produced by polishing the
metal with a 120–180 grit belt
or wheel then softening with
an 80–120 grit greaseless
compound or a medium non-
woven abrasive belt or pad.
The brushing gives the metal
a distinctive look, as it retains
some but not all of its
metallic lustre and is given a
pattern of very fine lines
parallel to the brushing
direction.
Aluminum Anodizing
Anodizing increases
corrosion resistance and
wears resistance, and
provides better adhesion for
paint primers and glues than
bare metal dose. Anodic
films can also be used for a
number of cosmetic effects,
either with thick porous
coatings that can absorb
dyes or with thin transparent
coatings that add
interference effects to
reflected light.
Finishing examples of various type of Prototyping process (Page: 9/10)
WAYKEN RAPID MANUFACTURING CO,. LTD. Web: www.waykenrm.com Email: [email protected]
Your custom prototype manufacturing Service Experts
Silk Screening
OR Pad Printing
Either process is a simple
process for imprinting an
image onto virtually any
material. Such as Logos,
letters, rating labels. The
color for printing is optionally
as well as painting according
to panton No.
Laser Etching
Using for Concave character
both tiny and big. painting 1
layer on clear material and
Laser Etching the lable to get
a light transmittance
characters, painting 2 layers
in different color on the
opaque material and laser
Etching the lable to get a
color different characters.
Finishing examples of various type of Prototyping process (Page: 10/10)
WAYKEN RAPID MANUFACTURING CO,. LTD. Web: www.waykenrm.com Email: [email protected]
Your custom prototype manufacturing Service Experts