FinishingBuyer:Black Berry

SL No. Operation1 Buck Iron2 Trimming & Checking.3 Full Body Iron4 Final Checking5 Measurement Check6 Insert Trims7 Presentation Iron8 Folding9 Packing

Buck Iron to be done in order to avoid Puckering & Looseness for the below Parts.

1 Collar2 Arm Hole3 Shoulder 4 Front Placket Iron

Buck Iron

Buck Iron to be done in order to avoid Puckering & Looseness for the below Parts.

Trimming & Checking is done for the fallowing Parts.

Sl No. Parts1 Button Check2 Button Hole Placket3 Collar4 Yoke Embroidary5 Wash Care Label6 Uncut Threads7 Open Seam8 Skip Stitches9 Stains

Trimming & Checking

In Iron below Parts are pressed.

SL No. Operation1 Collar2 Back Yoke3 Cuff4 Sleeve5 Back & Back Dart6 Front7 Bottom Hiking

Full Body Iron

In this Operation below Parts are Checked for the Rectifing Defects

SL NO. Opertation1 Collar2 Embroidary Yoke & Slv Placket3 Size Label4 Front5 Arm Hole 6 Cuff7 Sleeve8 Line Match9 Bottom Hiking

10 Back & Back Darts11 Overlap12 Broken Stitch13 Uncut Threads14 Poor Iron15 Stains16 Colour Shade

Final Checking

Measurement is done for Below Parts.

SL NO. Operation1 Front 2 Back3 Chest4 Bottom5 Sleeve6 Arm Hole7 Collar

Measurements

In This Operation Below Trims are Inserted

SL NO. Operation1 Btn Tape2 Clr Stiff3 Butter Fly

Insert Trims

Presentation Iron ids Done For Below Parts

SL NO. Operation1 Line Match2 Bottom Hiking3 Bottom Shape

Presentation Iron

In this Operation pcs is Folded as below

SL NO Operation1 Hanger is Removed 2 Pcs is leveled3 Clr is Inserted in the size Block4 Tissue papper & Backsupport is Placed 5 Clr is Pressed 6 Pcs is folded 7 Clr Traveller is placed inside Clr

Folding

In This Operation Pcs is packed as Follows

SL NO Operation1 Sizer is Placed in Clr2 Tag is Placed in Back3 Barcode is Fixed 4 Pcs is sealed with Polybag & kept in Product Box

Packing