Date post: | 05-Jul-2018 |
Category: |
Documents |
Upload: | lishan-jayasooriya |
View: | 230 times |
Download: | 0 times |
of 7
8/16/2019 finite element modeling, Clevis
1/7
STRESS ANALYSIS
8/16/2019 finite element modeling, Clevis
2/7
Geometries
Figure 1- normal design Figure 2- new design
Mesh
A very fine mesh was used for every model in order to make the results as accurate as possible
8/16/2019 finite element modeling, Clevis
3/7
Model constrains
A fixed support is given to the top two holes and force is applied to the top face of the nut. Same
approach was followed in every model.
Stress and deformation results were obtained from the simulations
8/16/2019 finite element modeling, Clevis
4/7
Results
Normal design normal load
Stress
Deformation
8/16/2019 finite element modeling, Clevis
5/7
Normal design max load
Stress
Deformation
8/16/2019 finite element modeling, Clevis
6/7
New design normal load
Stress
Deformation
8/16/2019 finite element modeling, Clevis
7/7
New design max load
Stress
Deformation