www.ocl.com FEATURES MEASUREMENTS PENDANT FR1-P1CC-13-WF-BTP Fiori TM • Field replacement for LED array and driver is simple and requires minimal effort. • Excellent thermal management is achieved through an extruded and machined aluminum fixture body. • LED luminaire reliability, L70 >100,000 hours at 70% lumen maintenance. • 45° cutoff and stepped bezel minimizes glare and increases visual comfort. • Fixture and LED light source are tested to LM-79 standards. • 3 step MacAdam ellipse color binning and 84 CRI standard. 2 step binning and 90+ CRI available [contact factory for details]. • Varying beam spread options are available: Narrow Flood [24 degree] or Wide Flood [50 degree]. • Four colors of braided nylon power cord are available: white, black, teal, or scarlet. • 24 standard powder coat paints offered, however all RAL colors available. • Contact factory for additional modifications or options. 4” 34” W T. 6 LBS 8” SHOWN WITH AAL (SEE OPTIONS) MATCHING FIXTURES Sconce Ceiling 34” W T. 8 LBS 6” 13” 34” W T. 6 LBS 6” 8” 8” 34” W T. 6 LBS 6”
Transcript
www.ocl.com
FEATURES MEASUREMENTS
PENDANT
FR1-P1CC-13-WF-BTP
FioriTM
• Field replacement for LED array and driver is simple and requires minimal effort.
• Excellent thermal management is achieved through an extruded and machined aluminum fixture body.
• LED luminaire reliability, L70 >100,000 hours at 70% lumen maintenance.
• 45° cutoff and stepped bezel minimizes glare and increases visual comfort.
• Fixture and LED light source are tested to LM-79 standards.
• 3 step MacAdam ellipse color binning and 84 CRI standard. 2 step binning and 90+ CRI available [contact factory for details].
• Varying beam spread options are available: Narrow Flood [24 degree] or Wide Flood [50 degree].
• Four colors of braided nylon power cord are available: white, black, teal, or scarlet.
• 24 standard powder coat paints offered, however all RAL colors available.
• Contact factory for additional modifications or options.
BEGIN HERE FOR ADDITIONAL INFORMATION GO TO WWW.OCL.COM AND SEARCH: FIORI PENDANT
SERIES HANGING SYSTEM SIZE REFLECTOR FINISH LAMPING (PHOTOMETRIC TEST #) VOLTAGE OAHSPECIFY IN INCHES
OPTIONS
FR2
FR3
FR4
FR1
P1CB PENDANT WITH A SINGLE WHITE NYLON POWER CORD
P1CC PENDANT WITH A SINGLE BLACK NYLON POWER CORD
P1CD PENDANT WITH A SINGLE TEAL NYLON POWER CORD
P1CE PENDANT WITH A SINGLE SCARLET NYLON POWER CORD
08
13
NF NARROW FLOOD [24 DEGREE]
WF WIDE FLOOD [50 DEGREE]
PTD PAINTED – SPECIFY CODE (EX. BKP FOR BLACK PAINT, SEE PAGE 122 FOR PAINT OPTIONS)
8”
1LD15/27K 1@15W LED 2700K1LD15/30K 1@15W LED 3000K1LD15/35K 1@15W LED 3500K1LD15/40K 1@15W LED 4000K
13”
1LD15/27K 1@15W LED 2700K1LD25/27K 1@25W LED 2700K1LD35/27K 1@35W LED 2700K
1LD15/30K 1@15W LED 3000K1LD25/30K 1@25W LED 3000K1LD35/30K 1@35W LED 3000K
1LD15/35K 1@15W LED 3500K1LD25/35K 1@25W LED 3500K1LD35/35K 1@35W LED 3500K 1LD15/40K 1@15W LED 4000K1LD25/40K 1@25W LED 4000K1LD35/40K 1@35W LED 4000K
120
277
34
34
DMO 0-10V DIMMING DRIVER
DML LUTRON® DIMMING (NOT AVAILABLE FOR 8")
EMI INTEGRAL EMERGENCY REQUIRES 13” WHITE BALLAST CANOPY (SEE BELOW)
ULD UL DAMP LABEL
FUS FUSED
AAL ANODIZED ALUMINUM BOTTOM BEZEL
AGD ANODIZED GOLD BOTTOM BEZEL
SPECIFY CATALOG CODE
- - - - - / - - -
SAMPLE CODE: FR1-P1CC-13-WF-BTP-1LD25/35K-120-34-AAL PHOTOMETRIC INFORMATION AVAILABLE AT WWW.OCL.COM
EMI INTEGRAL
EMERGENCY(13” WHITE CANOPY)
• Fixture mounts to a standard 4” octagon J-box (supplied by others).
• 5" diameter canopy finished to match fixture.
• Bodine® emergency ballast available, standard with remote mounted test switch and indicator light.
• Lutron® (Hi-lume A series) and various (0-10V) dimming drivers available. Controls not included.
• Integral Class II driver (3-5 year driver warranty depending on driver specification).
• Maximum overall height subject to driver specification. Consult factory for details.
• For photometric data, please visit www.ocl.com.
• Structural mounting required for fixtures over 50 lbs.
• For specific mounting instructions, please contact factory.
