+ All Categories
Home > Documents > Fire Detector Devices.pdf

Fire Detector Devices.pdf

Date post: 04-Apr-2018
Category:
Upload: sorry2qaz
View: 229 times
Download: 0 times
Share this document with a friend

of 16

Transcript
  • 7/29/2019 Fire Detector Devices.pdf

    1/16

    FIRE

    FIRE

    Smoke & Fire DetectorsSounders & Strobes

    Fire Alarm Control Panels

    Emergency Warning Systems

    Analog Fire Systems

    Wireless Fire Alarm Systems

    Fire Accessories

    45

  • 7/29/2019 Fire Detector Devices.pdf

    2/16

    FI RE

    SALES 1300 368 755 TECH SUPPORT 1800 220 345

    FIRE DETECTIONDEVICES

    Conventional Smoke & Fire Detectors

    ADEMCO LOW PROFILE PLUG INSMOKE DETECTORS Low profile design

    Same design for both photo & ion versions

    Uses universal B401 base Magnetic test feature

    Blinking LED

    MOD400R port

    Field cleanable, easily removable cover & screen

    12/24VDC operation

    ADEMCO PLUG-IN THERMAL DETECTORS

    Provides rate of rise & fixed point operation

    Available in types A, B,C & D

    Uses universal B401 plugin base

    Dual LEDs for 360 visibility

    Interchangeable with 600 series smokes

    12/24VDC operation

    SECURITY PHOTO OPTICALSMOKE DETECTOR

    Photo optical detector

    Unique chamber design controls thebuild up of dust

    Low profile, plug in design

    Laser test feature

    12/24DC operation

    Suits four wire relay base

    SYSTEM SENSOR LOW PROFILE SMOKEDETECTORS WITH SOUNDER

    Plug in design

    On board sounder with temporalpattern tone

    Aux relay with C/O contacts

    Smartcheckdiagnostics Thermal detection

    12/24VDC operation

    Models Available:

    Part Number Description

    1600 Low profile ion detector

    2600 Low profile photo electronic detector

    2151AUS System Sensor photoelectronic detector

    1151EIS Intrinsically safe ion detector

    B401R Universal mounting base 2 wirewith resistor

    B401 Universal mounting base 2 wire

    Models Available:

    Part Number Description

    5151A Type A thermal detector

    5151B Type B thermal detector

    5151C Type C thermal detector

    5151D Type D thermal detector

    B401R Universal mounting base 2 wirewith resistor

    B401 Universal mounting base 2 wire

    Models Available:

    Part Number Description

    2151 Low profile photo detector

    Models Available:

    Part Number Description

    4WTARB Photo electronic with thermal, 4wire, aux relay with C/O contacts &

    on board sounder

    4WITARB As above with non latching smoke

    & isolated thermal

    SYSTEM SENSOR I3 SERIES PHOTOSMOKE DETECTORS

    Low profile plug in design

    Normally open contacts

    Dual LED alarm & service indicators

    Thermal option Drift compensation

    Remote maintenance signal

    Models Available:

    Part Number Description

    2WB 2 wire photo electronic smoke

    2WTB 2 wire photo electronic smoke

    with thermal

    4WB4 wire photo electronic smoke,N/O contacts

    4WTB 4 wire photo electronic smoke

    with thermal

    46

  • 7/29/2019 Fire Detector Devices.pdf

    3/16

    Conventional Smoke & Fire Detectors

    SALES 1300 368 755 TECH SUPPORT 1800 220 345

    FIRE

    FIRE DETECTIONDEVICES

    SYSTEM SENSOR PHOTO ELECTRONICSMOKE ALARM Compact attractive design

    Photo electronic chamber providesexceptional stability

    85dB on board horn

    Aux relay

    Interconnectable up to 12 units

    8 Second AVF on relay outputs Tamper resistant base

    Approved to AS3786

    ADEMCO SMOKE DETECTORCOMPLIANCE MODULE

    Can be used on systems which requirecompliance with council regulations andBCA requirements

    Approved to AS3786 for use with 2012Hsmoke alarms

    Includes a dedicated standby battery

    Integrates with all security control panels

    SYSTEM SENSOR I3 SERIESSENSITIVITY READER

    For new i3 series detectors

    Infra red reader

    No voltmeter required

    Outputs % per foot & textmessage

    Hand held or connect to pole

    Model Number:

    SENS-RDR

    CHEMETRONICS RATE OF RISEHEAT DETECTOR

    Low profile design

    N/O contacts

    Rate of rise and fixed temp operation

    Low profile mounting

    Resettable on rate of rise

    Wireless version available

    Dual contact version available

    2WMOD I3 SERIES LOOPADAPTER MODULE

    Converts any security panel to acommercial fire panel.

    Converts 2 wire to 4 wire

    Suits all security panels

    Supports all Ademco detectors

    Remote maintenance signal whenused with i3 detectors

    EZ walk test

    Models Available:

    Part Number Description

    2012H Photo electronic smoke alarm 4 wire

    REG202012 12/24 VDC Regulator 1 amp

    Models Available:

    Part Number Description

    SDC Power supply module with12V 1.2 AH battery SSL Listed

    Models Available:

    Part Number Description601 Rate of rise & 57C fixed element,

    1 set of N/O contacts602 Rate of rise & 94C fixed element,

    1 set of N/O contacts622 Rate of rise & 57C fixed element,

    2 sets of N/O contacts603 57C fixed temp operation, 1 set of

    N/O contacts5809 Wireless version of 601

    4 WIRE PLUG-IN RELAY BASES Suits 2 & 4 wire systems

    12VDC & 24VDC models

    Accepts photo,ion & heat detectors

    Non latching or latching versions with

    change over contacts Interchangeable with 600 Series smokes

    Tamper resistant base

    Models Available:

    Part Number Description

    B412NL Non latching 12VDC 2 or 4 wire circuit

    B412RL Latching 12VDC 2 or 4 wire circuit

    B424L Latching 24VDC 2 or 4 wire circuit

    REMOTE INDICATORS

    Circular design

    Fits standard conduit box

    Full range available

    Fitted with terminal block for easy termination Contrasting engraving ensures high visibility

    Can be used with 2012 smoke alarm

    Models Available:

    Part Number Description

    RIFA Fire alarm

    RIIR Fire detector in room

    RICS Fire detector in concealed space

    RIDS Fire detector in duct

    RILS Fire detector in lift shaft

    47

  • 7/29/2019 Fire Detector Devices.pdf

    4/16

    FI RE

    SALES 1300 368 755 TECH SUPPORT 1800 220 345

    SMOKE & FIREDETECTORS

    Conventional Fire Detection DevicesSYSTEM SENSOR PHOTO ELECTRICDUCT PROBES Streamlined design with clear cover over

    detection chamber

    Telescopic sampling tube

    Easy to install, mounting template supplied Low air flow design

    Field cleanable

    Available in 2 wire 12/24VDC version or4 wire version

    ECO1003SYSTEM SENSOR PHOTO-OPTICAL SMOKE DETECTOR

    Photo optical detector

    Unique chamber design controlsthe build up of dust

    Low profile, plug in design

    Laser test feature

    12/24VDC operation

    SYSTEM SENSOR REFLECTOR TYPEPROJECTED BEAM SMOKE DETECTORS

    10m - 100m range

    4 Wire 12/24VDC operation

    Ceiling or wall mount

    In-built alignment tool

    Automatic gain control

    Remote test station available

    Low current operation

    KAC MANUAL CALL POINTS

    Frangible glass element

    Micro switch operation ensures reliability

    Insert key for easy testing Wide variety of models and accessories

    Wireless version available

    ECO 4 WIRE RELAY BASES

    12VDC operation

    Compatible with all ECO detectors

    Compatible with all security panels

    Latching and non latching models

    One set of clean C/O contracts provided

    Models Available:

    Part Number: Description

    ECO12NL 12V Non latching relay base

    ECO12RL 12V Latching relay base

    ECORTU LASER TEST UNIT

    Compact,battery operated

    Tests ECO detectors remotely

    Compatible with allECO units

    Low cost

    Models Available:

    Part Number: Description

    DH100LP 2 wire 12/24VDC detector and probe

    DH100ACDCP 4 wire, multi voltage photo detectorand probe

    DH200LP Analog detector and probe

    ST3 1m sampling tube

    RTS451 Remote test station

    Models Available:

    Part Number: Description

    BEAM1224 Full beam kit including brackets andtest equipment

    RTS451 Remote test station

    A77 EOL Module (optional)

    Models Available:

    Part Number: Description

    MCPR Red FIRE ALARM breakglass

    MCPWE White EMERGENCY alarm breakglass

    MCPW White DOOR RELEASE breakglassMCPG Green DOOR RELEASE breakglass

    MCPWDP MCPW fitted with double pole switch

    MCPFLAP Clear flap for all MCP

    MCPWP Weatherproof FIRE ALARM breakglass

    MCPREXP Explosion proof MCPR

    MCPK Breakglass keyholder

    MCPGR 5 pack replacement glass

    5817/MCPR Wireless FIRE ALARM breakglass

    SSL Listed

    DETECTOR CLEANING TOOLS

    Mod 400R allows you to gain intelligentinformation from conventional systems.

    Compatible with all System Sensor

    smoke detectors Tests sensitivity of detectors

    Reduces maintenance costs

    Can be connected to any standardDC multimeter

    Great diagnostic tool

    Models Available:

    Part Number Description

    MOD400R Field sensitivity module

    SMOKE Test smoke150g can

    EAD1200 Invertible airduster 200mlEAD400D Airduster 400ml

    XR2 Removal tool for low profile 100 series

    XR5 Removal tool for thermal 400 series

    XP4 4m extension poles for XR tools

    48

  • 7/29/2019 Fire Detector Devices.pdf

    5/16

    Conventional Smoke & Fire Detectors

    SALES 1300 368 755 TECH SUPPORT 1800 220 345

    FIRE

    SMOKE & FIREDETECTORS

    SHARP EYESENSOR FLAME DETECTOR

    UV/IR sensors detect broad range of hydrocarbon andnon-hydrocarbon fires

    Responds to fire events in milliseconds

    Microprocessor-based for greater reliability

    Immune to nuisance alarms caused by sunlight,welding,engine exhaust

    Interfaces with standard alarm panels

    Electromagnetic interference hardening,guardsagainst environmental RFI

    Built in test systems (BITS) capability for fault andalarm testing from remote site

    Fast, easy installation using standard hardware

    FM-approved,built to MIL STD, complies with NFPA 72

    Models available:Part Number: Description

    20/20 R Single IR Detector

    20/20 U UV Detector c/w manual test

    20/20 UB UV Detector c/w built in test

    20/20 L UV Detector c/w manual test

    20/20 LB UV detector c/w built in test

    20/20 I Triple IR detector c/w manual test

    20/20-03 Swivel Mounts

    VESDA

    ASPIRATING SMOKE DETECTION

    VESDA draws air through a pipe network using a highlyefficient aspirator. A sample of this air is filtered and thenpasses through the calibrated chamber of the laserdetector where it is exposed to a stable calibrated lightsource.When smoke is present,light is scattered withinthe detection chamber and is instantly recognised by thehighly sensitive receiver system.

    Models available:

    Part Number: Description

    VESDA LP Laser Plus is designed for larger systems up to2000 square metres and provides four outlet pipesfrom a common manifold.

    VESDA SC Laser Scanner offers the ability to identify, which ofthe four outlets is carrying smoke. Each inlet can beset for individual alarm levels providing maximumflexibility.

    VESDA LC Laser Compact is a single zone unit for smallerapplications and offers a cost effective solutionwhile still offering all the standard features of theLaser Plus and Scanner.

    49

  • 7/29/2019 Fire Detector Devices.pdf

    6/16

    FI RE

    SALES 1300 368 755 TECH SUPPORT 1800 220 345

    SOUNDERS &STROBES

    Models Available:

    Part Number: Description

    H1224W White horn 12/24VDC, 101dBA

    H1224R Red horn 12/24 VDC,101dBA

    P2415W White horn/strobe combination unit24VDC,101dBA

    P2415R Red horn/strobe combination unit 24VDC, 101dBA

    Part Number: Description

    P1215R Red horn/strobe combination 12VDC,101dBA

    BBSR Red surface backbox for Spectralert series

    BBSW White surface backbox for Spectralert series.

    Sounders & Strobes

    SYSTEM SENSOR SPECTRALERT HORNS AND STROBES

    Modern compact design

    Red & white colour options Horns - 12 or 24VDC operation

    Strobes - 12 & 24VDC operation

    Very low current consumption

    Two volume levels - field selectable

    Two horn tones - field selectable

    Supplied with universal mounting plate

    New T3 temporal evacuation tone

    3 year warranty , UL and FM approved

    SYSTEM SENSOR MULTI ALERT HORN AND STROBES

    Neat compact design

    Acoustically efficient design produces 105dBA @ 1m

    Horn 12 or 24VDC operation

    Low current 21mA

    Adjustable volume control

    Multi tone via dip switch selection

    Tone can be selected at fire panel

    Available in red or white ABS

    Conduit or cable entry bases available

    New T3 temporal evacuation tone

    Models Available:

    Part Number: Description

    EMA1224FR Full feature horn.Red, 12/24VDC

    EMA1224FW Full feature horn.White. Requires Base

    EMA12FSSR Full feature horn/strobe - 12VDC

    EM24FRSSR Full feature horn/strobe - 24VDC

    Part Number: Description

    ELPBR Low profile cable base. Red

    ELPBW Low profile cable. White

    ESBRS Conduit surface base. Red

    SYSTEM SENSOR MULTI ALERT SOUNDER BASE Neat compact low profile design

    12 or 24VDC operation

    Suitable for direct mounting under detector or as a wallmounted unit

    Suits detectors with 60mm mounting centres

    93 dBA @1m

    Multi tone via dip switch selection

    New T3 temporal evacuation tone

    Tone can be selected at fire panel

    Low current 21mA

    Adjustable volume control

    Models Available:

    Part Number: DescriptionDBS1224FL Full feature 12/24VDC sounder base in white

    LBLFB Fire label

    All EMA Devices require an ELP or ES Base

    50

  • 7/29/2019 Fire Detector Devices.pdf

    7/16

    SALES 1300 368 755 TECH SUPPORT 1800 220 345

    FIRE

    SOUNDERS &STROBES

    Sounders & Strobes

    SYSTEM SENSOR SOUNDER BASES

    Low profile excellent appearance

    Recessed and surface mounted models Unit is capable of individual operation via

    detector base or group activation from analarm panel

    Compatible with full detector range

    83 dBA horn

    Low current 15mA operation

    24VDC operation

    New T3 temporal evacuation tone

    SYSTEM SENSOR MULTIALERT SOUNDERS

    Sounders 12V to 24V operation

    Low current operation

    Field selectable tones

    Red or white colour options

    New T3 temporal evacuation tone.

    90 dBA sound level

    Models Available:

    Part Number: Description

    PA400R Red mini alert sounders12/24VDC 90dBA

    PA400W White mini alert sounder12/24VDC 90dBA

    SYSTEM SENSOR FIRE BELLS

    Underdome high decibel design

    Low current motor driven operation

    Polarised connection for fullysupervised connection

    150mm and 200mm models

    Suitable for outdoor/indoor applications

    Models available:

    Part Number: Description

    KMS8 200mm 24VDC fire bell

    KMS6 150mm 24VDC fire bell

    KMS12 150mm 12VDC fire bell

    WBB Weatherproof backbox

    LBLFB Fire label

    Models Available:

    Part Number: Description

    B401BH Dual function recessed/surface mountsounder includes detector base

    SMB600 Surface mount conduit baseto suit B401BH

    AVAC 120 LIFE SAFETY VOICE ALARM SYSTEM

    AVAC 120 is a dual 60 watt amplifier warning system and issuitable for small to medium applications.The systemprovides Alert and Evac tones with selectable prerecordedvoice messages,a unique Test mode, Firemans emergencyPA, Public address and Background music inputs. Thesystem may incorporate either a single AVAC 120 or anetwork consisting of up to 10 units can be installed forlarger applications.The AVAC 120 is compatible with mostanalog or conventional Fire Systems allowing simpleintegration and control.

    51

  • 7/29/2019 Fire Detector Devices.pdf

    8/16

    FI RE

    SALES 1300 368 755 TECH SUPPORT 1800 220 345

    FIRE ALARMCONTROL PANELS

    Conventional Fire Alarm Control Panels

    LST 3000 CONVENTIONAL FIRE ALARM PANEL

    The 3000 series is a state of the art microprocessor based

    panel offering advanced programmable features.Thedisplay incorporates a full LCD alphanumeric display whichprovides total system information in an easy to readformat,optional LED indicators are available.The 3000 issupplied in a parchment white finish to emphasise it smodern features.

    The 3000 is expandable in groups of 8 from 8AZF to64AZF capacity

    Real time date and clock

    10 fully programmable zone types,each with 7 outputconfigurations

    Optional AS1668 controls available

    Serial 4 wire mimic feature

    Up to 64 relay output zones can be added

    Standard walk test facility

    Full monitored bell and ACF outputs

    Laptop programmable

    Auto testing with watchdog technology to monitorsystem performance

    Optional gas releasing modules available

    Models Available:

    Part Number Description

    LST303208 32 zone capacity 8 zones fitted

    LST303216 32 zone capacity 16 zones fitted

    LST303224 32 zone capacity 24 zones fitted

    SYSTEM OPTIONS

    Part Number Description

    3000DHTX Door holder power supply 3 amp upgrade

    3000SW DOS based programming software andcable for date and time panels only

    METAL WORK

    Part Number Description

    3000BB Battery box

    3024FS Flush surround for 24 zone panels

    AS1668 CONTROL

    Part Number Description

    1668A AS1668 fan control first unit

    1668B AS1668 fan control additional to AS1668A

    GAS RELEASE MODULES

    Part Number Description

    3000GRI First dual risk gas module

    3000GRZ Additional dual risk gas release module

    EVACUATION MODULES

    Part Number Description

    20WEVAC 20 watt EVAC system on plate, PA optional

    50WEVAC 50 watt EVAC system in kit form

    EVACPA PA option for EVAC

    EXPANSION BOARDS

    Part Number Description

    3000UG 8 zone upgrade kit

    3000803 8 way relay exp.board c/e cables & screws

    3000813 8 way open collector o/p board c/w cables& screws

    3000MIMIC LCD mimic panel

    52

  • 7/29/2019 Fire Detector Devices.pdf

    9/16

    SALES 1300 368 755 TECH SUPPORT 1800 220 345

    FIRE

    FIRE ALARMCONTROL PANELS

    Conventional Fire Alarm Control Panels

    Fully approved to AS7240 parts 2

    & 4 the Series 700 offers an arrayof user and installer friendlyfeatures.Supplied in an attractivesurface/flush mount enclosureeach version provides simple usercontrol via a standard 003 keyswitch. Each version supports upto 60 System Sensor Evacuationsounders.Suitable for Brigademonitoring or local systems

    SSL listed 1.5 amp PSU

    One man walk test

    Two wire mimic panels

    Suitable for Brigade monitoring

    72 hr standby onstandard batteries

    Programmable time delays

    Models Available:

    Part Number Description

    LST 702 2 zone panel with keyswitch control

    LST 704 4 zone panel with keyswitch control

    LST 708 8 zone panel with keyswitch control

    LST 762 4 way relay board

    LST 760 Full feature Mimic Panel

    LST 700 SERIES 2, 4 & 8 ZONE CONVENTIONAL FIRE PANELS

    EMERGENCY WARNING AND INTERCOMMUNICATIONSYSTEM

    We offer a full range of EWIS incorporating MECP, Wardenintercommunication points, and break glass alarms visualalarms. Our complete range offers systems which are fullyapproved to AS2220,as well as smaller systems, which providesAS2220 tones for AS1670.1 systems. 3 year warranty,SSL Listed.

    Ewis

    Models available:

    Part Number: Description

    QE90 EWIS systems fully approved to AS2220

    50WEVAC 50 watt EVAC System Alert, Action, PA inbattery box

    AVAC120 Dual Output with dedicated powersupply

    SP5W 100mm ceiling speaker 5 watt

    SP5WSM 100mm surface mount speaker 5 watt

    HORN10W 10 watt horn speaker

    TK86R Red strobe 24VDC

    TK86A Amber strobe 24VDC

    MTS10WC Multitone horn 12/24VDC

    53

  • 7/29/2019 Fire Detector Devices.pdf

    10/16

    FI RE

    SALES 1300 368 755 TECH SUPPORT 1800 220 345

    ANALOGFIRE SYSTEMS

    Analog Fire Systems

    BC 216 ANALOG FIRE PANEL.The BC 216 is an analog system designed to provide the best solution for small,medium and largeinstallations.Each panel supports one to four loops which can be divided into 144 zones.Systemscan be networked up to incorporate a maximum of 127 panels with a total of 254 loops. Eachanalog loop will support a total of 198 devices,99 sensors and 99 modules.The 32 bit processor provides the highest efficiency, speed and performance and allows a largenumber of advanced features to be incorporated. An example is detector trending which allowsthe system to predict into the future when detectors will require maintenance.The system alsoallows individual detector selection of the led blink function with an override feature on walk testselection.The BC216 incorporates a full LCD alphanumeric display with optional zone LEDS. Each panel in acustom GSSnetwork can be programmed to provide total system information and control or as asub panel providing local control. All panels are connected via a high speed redundant networkwhich also incorporates fail safe operation if the network fails.

    Models available:

    Part Number: Description

    BC 216-1 One to four loop analog FIPBC 216-2 One to 254 loop analog networkable FIPBC 216CE 19inch Rack mounted FIPLIF64-1 Single loop expansion card

    LG-3 Dual loop expansion card

    ABF216 REMOTEDISPLAY PANEL

    Compact display unit provides fullcontrol and display from a BC216fire panel. May be installed on theGSSnet and programmed toprovide complete networkinformation and control or anyother combination required.Theunit provides a 4 line 20 characterbacklit display.Connection to the network is fully

    redundant and the standard wiringdistance is 1200 metres.

    2700TEM ANALOGMULTISENSOR DETECTOR

    One detector incorporating bothphoto optical and heat detectionelements which uses customalgorithms to evaluate thedevelopment of a true fire. Theseintelligent algorithms compensate

    for the influence of dirt whichfurther reduces the potential forfalse alarms.

    7251 OPTICAL LASERSMOKE DETECTOR

    A low profile high sensitivity opticaldetector using a custom chamberusing the latest laser technology.The detector is compatible with thefull range of analog devices and canprovide high sensitivity protection

    at a much lower cost than airsampling systems.The laser is idealfor areas such as electronicequipment rooms and clean roomsto provide the earliest possibledetection

    6500 ANALOGHEAT DETECTOR

    A low profile heat detector for use inareas where smoke detectors areunsuitable.Unique algorithms allowthe use of a single model formultiple sensitivities.Theseintelligent algorithms enable theBC216 to determine fixedtemperature or rate of rise operation

    and to provide the correct level ofdetection.

    2700 ANALOG PHOTOOPTICAL SMOKE DETECTOR

    A low profile design using a photooptical chamber to sense thepresence of visible smoke.TheBC216 incorporates intelligentalgorithms to control the influenceof dirt and to predict the date whena detector will require cleaning.

    1700 ANALOG IONISATIONSMOKE DETECTOR

    A low profile design using a unipolardual chamber system consisting of asensing and a reference chamber.The BC216 incorporates intelligentalgorithms to compensate forcontamination of the chamber.

    54

  • 7/29/2019 Fire Detector Devices.pdf

    11/16

    SALES 1300 368 755 TECH SUPPORT 1800 220 345

    FIRE

    ANALOGFIRE SYSTEMS

    IM-10 MONITORMULTIMODULE

    An addressable input moduleproviding ten supervised hardcontact inputs to the analog loop.Surface mounting requires the useof a multimodule enclosure.

    Analog Fire Systems

    M503ME MICROMONITOR MODULE

    A compact micro module to allowthe connection of hard contactdevices such as pressure switchesor water flow switches to theanalog loop.

    MONITOR MODULES

    Addressable input modules to allowthe connection of either one or twosupervised hard contact input zonesto the addressable loop.Each moduleincorporates a short circuit isolator toprovide additional loop protection.One module also incorporates anoutput relay in addition to the inputfacility.For mounting, modules requireeither a surface box or a din rail

    Part Number: Description

    M210E Single Hard contactsupervised input module

    M220E Dual hard contactsupervised input module

    M221E Dual hard contactsupervised inputmodule with oneclean contact Output relay

    M512ME CONVENTIONALZONE MODULE

    An addressable loop module toallow the connection ofconventional detectors andintrinsically safe detectors to theanalog loop.For surface mountinga SMB500 mounting box isrequired.

    DH200LP DUCT PROBE

    A compact analog duct probe

    using photo optical principles tosense the presence of visiblesmoke within air conditioningducts.The unit is fully sealed toallow its use in very low air flowapplications and is extremelysimple to install. A variety ofsample tubes are available to suitany situation.

    B501 DETECTOR BASE

    Analog base for use with the aboveanalog detectors. SEMS

    terminations with colouredmarkings for easy connection.

    M500KAC MANUAL CALLPOINT

    An addressable manual callpointfor use on an analog loop. Eachunit is addressed as a loop moduleby the BC216.May be surfacemounted or flush mounted usingan adaptor kit.

    FTX FILTREX ANALOGOPTICAL SMOKE DETECTOR

    The optical detector for heavily

    contaminated areas is equippedwith two 32 micron filters whichprevent the entry of dust andwater particles.The filters allowsmoke to enter the detectionchamber whilst preventing theingress of dust or water particles orinsects. A ventilation fan isprovided to ensure the correctcirculation of air through thedetection chamber.

    55

  • 7/29/2019 Fire Detector Devices.pdf

    12/16

    FI RE

    SALES 1300 368 755 TECH SUPPORT 1800 220 345

    ANALOGFIRE SYSTEMS

    M201E CONTROL MODULES

    Addressable modules to provideeither supervised or clean contact

    relay outputs from the analog loop.The selection of output type is viaan onboard dip switch.Thismodule incorporates a short circuitisolator to provide additionalloop protection.

    MODULE MOUNTING& ENCLOSURES

    Surface mounting enclosures tofacilitate the mounting of loopmodules in the field.

    Part Number: Description

    M200E-DIN Base for railcarrier -single

    M200E-PMB Base for mountingplate-single

    M200SMB Surface mountingbox-single

    SMB500 Surface box for

    M500 seriesM200-SMB-MM Surface mounting

    box for multimodules

    DBS LOOP SOUNDER

    White plastic multitone sounderdesigned to mount under adetector, accommodates the B501analog base.Can be powered fromthe analog loop and individuallycontrolled bythe BC216.

    Part Number: Description

    DBS24ALW Loop activated andpowered sounder

    DBS24AEW Loop activated,externally poweredsounder

    6 WAY CONTROL

    MULTIMODULES

    Addressable output modules

    providing six discreet outputs in

    either a supervised or clean

    contact relay format,dependant onthe module selected. Surface

    mounting requires the use of a

    multimodule enclosure.

    Part Number: Description

    SC-6 6 way supervisedControl output module

    CR-6 6 way clean contact

    Relay output module

    M200XE ISOLATOR MODULE

    Isolator module to disconnect theaffected area of a loop when a shortcircuit occurs.These should beinstalled to at least meet theminimum requirements of AS1670.1

    EMA LOOP HORN

    Compact electronic multitonesounder designed to be poweredfrom the analog loop.105dboutput to meet BCA requirements.Individually controlled by theBC216.Requires mounting base.

    Part Number: Description

    EMA24ALW White loopactivated andpowered horn

    EMA24AEW White loopactivated, externally

    powered hornELPBW White low profile

    mounting base

    M201-E-240 CONTROLMODULE

    Addressable modules to provide

    240V clean contact switching fromthe addressable loop.This modelprovides clean contacts which aresuitable for low voltage switching.The unit incorporates a shortcircuit isolator to provideadditional loop protection.

    Part Number: Description

    M201E-240 Single 240V ACclean contact withsurface mount box

    M201E-240-DIN Single 240V ACclean contact Dinrail mount

    Analog Fire Systems

    56

  • 7/29/2019 Fire Detector Devices.pdf

    13/16

    SALES 1300 368 755 TECH SUPPORT 1800 220 345

    FIRE

    Vista Addressable Fire SystemsThe Vista fire system is suitable for both commercial and residential applications. The system provides the choice of either 250 wirelesszones via a 5881EH receiver or 250 addressable wired zones via the standard V-Plex loop or any combination of these technologies.

    VISTA FIP LOCAL

    Suitable for commercial and residential applications which do notrequire connection to the fire monitoring network. Control is via asingle 003 keyswitch to provide secure yet simple operation. Systemincorporates a 1000 real time event log.

    SSL Listed

    Models Available:

    Part Number: Description

    Vista 128FBL 128 Zone addressable control - Local applications

    Vista 250FBL 250 Zone addressable control - Local applications

    VISTA FIP MONITORED

    Used where the system requires fire monitoring in accordance withB.C.A. Provides all the features of the Vista 250FBL. 1000 Event Log

    SSL Listed

    Models Available:

    Part Number: Description

    Vista 2128FB 128 Zone addressable control - Fire monitoredapplications

    Vista 2250FB 250 Zone addressable control - Fire monitoredapplications

    6160CR ALPHAANNUNCIATOR

    Large 32 characteralpha display

    Illuminated controls

    Complete system informationand control

    Connection via a 4 wiredata bus

    Fully supervised

    5809 WIRELESS THERMALDETECTOR

    Reliable electro mechanicaloperation

    Available in both rate of rise -fixed temp and fixedtemp models

    Onboard test switch

    Fully supervised

    Models Available:Par t Number : Description

    5809 A Type thermal

    5809B B Type thermal

    5809C C Type thermal

    FSA LED ANNUNCIATOR

    8 + 24 Zone models

    Silence and reset control

    Key switch input

    Fully supervised

    Connection via a 4 wire data bus.

    Models Available:

    Part Number: Description

    FSA8 8 Zone Annunciator

    FSA24 24 Zone Annunciator

    5808 WIRELESS SMOKEDETECTOR WIRELESSSMOKE ALARM

    Dual approval to AS1603.2and AS3786

    Photo optical smoke detector

    Std Btype thermal element

    Onboard sounder

    Smartchamber supervision

    Fully supervised

    WIRELESS FIREALARM SYSTEMS

    57

  • 7/29/2019 Fire Detector Devices.pdf

    14/16

    FI RE

    SALES 1300 368 755 TECH SUPPORT 1800 220 345

    WIRELESS FIREALARM SYSTEMS

    Vista Addressable Fire Systems

    5817CB WIRELESS HARDCONTACT TRANSMITTER

    The 5817 is a compacttransmitter which can be

    connected to virtually any devicewhich provides contact closure.This includes,detectors, manualcall points, flow switches,andpressure switches.

    4209U VPLEXADDRESSABLE ZONEMODULE

    4 conventional two wire zones

    Up to 25 detectors on eachzone

    Fully supervised operation.

    5880RPF WIRELESS FIREREPEATER

    Installs remotely fromfire panel

    Boosts weak signals fromdetectors and transmitters

    Fully supervised by fire panel Can be remotely powered

    4101SN VPLEXADDRESSABLE RELAYMODULE

    Compact VPlex input/outputmodule which is ideal for flowswitch/solenoid valve

    combinations One supervised zone input

    One set of 2 amp changeover contacts.

    4297 VPLEXADDRESSABLE LOOPISOLATION/BOOSTERMODULE

    Protects the Vplex loopagainst short circuitconditions

    Boosts power to the loop onlong runs

    5192SD VPLEXADDRESSABLE SMOKE

    Photo electronic smokedetector

    Low profile design

    V-Plex addressable loop device

    Automatic maintenance

    reporting Simple 2 wire installation

    DIP switch or serial numberprogrammable.

    4193SNF SINGLE ZONEINPUT MODULE

    One zone with EOLsupervision

    Small & Compact

    Enables any open contactdevice to be interfaced withan addressable loop

    4204 VPLEXOUTPUT MODULES Provides 4 relays with c/o

    contacts or 2 supervised bellrelay outputs

    Fully programmable andsupervised

    Models Available:

    Part Number: Description4204F 4 relay outputs -

    c/o contacts4204CF 2 bell outputs -

    supervised

    5817/MCPR WIRELESSCALL POINT

    Available in Red - Fireorwhite Emergency enclosures

    Frangible element Key operated test switch

    Fully supervised wirelessoperation.

    5881 EH WIRELESS FIRERECEIVER

    250 Zone receiver Supports all 5800 series

    wireless fire devices Listed for commercial fire

    installations when used withthe Vista-250FB andVista-128FB controls

    58

  • 7/29/2019 Fire Detector Devices.pdf

    15/16

    SALES 1300 368 755 TECH SUPPORT 1800 220 345

    FIRE

    FIRE ACCESSORIES

    Magnetic Door Holders

    ELECTRO MAGNETIC DOOR HOLDERS

    Electro magnetic door holders which are robust, reliable and pricecompetitive. The range includes both floor/ceiling and wall models and allare very efficient with low current consumption

    Models available:

    Par t Number : Description

    1350 Surface mounted dual tappings 25/50kg

    ESDR150S Door holder with adjustable bracket 150mm

    ESDR300S Door holder with adjustable bracket 300mm

    ESDRW 24V magnetic wall mount with release switch

    ESDRF 24V magnetic floor mounted with release switch

    ESDRW12 12V magnetic wall mount with release switch

    ESDRF12 12V magnetic floor mounted with release switch

    ANVIL Replacement anvil for door holders

    DHPS 1.5amp D/H power supply

    DHPS4 4 amp D/H power supply

    DHPSX Larger sizes available on request

    BATTERIES

    Models Available:

    Part Number: Description

    PS1212 12V 1.2 AH Battery

    PS1265 12V 7 AH Battery

    PS0610 6V 10 AH Battery

    PS1217 12V 17 AH Battery

    PS1226 12V 2.6 AH Battery

    Other sizes on application

    SYSTEM SENSORWATERFLOW SWITCH

    Computer designed paddles

    Durable metal enclosure

    Visual indication

    Sealed retard chamber

    Durable twin synchronisedswitches

    Tamper resistant.

    FIRE CABLE

    Models Available:

    Part Number: Description

    FC75 .75mm two core RED sheathed per 100m

    FC14020 14/020 four core RED Sheathed per 100m

    FC150 1.5 mm two core RED Sheathed per 100m

    Other sizes available on request

    Models available:

    Part Number: Description

    WFD20E 50mm Vane type waterflowswitch, adjustable time delay

    WFD25E 65mm Vane type waterflowswitch, adjustable time delay

    WFD30E 80mm Vane type waterflowswitch, adjustable time delay

    WFD40E 100mm Vane type waterflowswitch, adjustable time delay

    WFD60E 150mm Vane type waterflowswitch, adjustable time delay

    WFD80E 200mm Vane type waterflowswitch, adjustable time delay

    WFDT Tee Tap waterflow,adjustabletime delay

    WFDTNR Tee Tap waterflow - nonretard type

    Batteries & Cable

    Sprinkler Systems

    59

  • 7/29/2019 Fire Detector Devices.pdf

    16/16

    FI RE

    Sprinkler Systems

    SYSTEM SENSOR PRESSURE SWITCHES

    Alarm and supervisory models

    Sensitivity adjustment wheel

    Bellows actuated

    Tamper Resistant

    10-200PSI operation

    250 PSI Max pressure.

    Models Available:

    Part Number: Description

    EPS101 Alarm pressure switch single pole

    EDP102 Alarm pressure switch double pole

    EPS1201 Supervisory low pressure

    EPS1202 Supervisory high/low

    BURKERT L282 SOLENOID TEST VALVE Pilot valve design allows testing of water flow

    without power being available

    Solid brass construction

    Replaceable solenoid assembly

    Easy to install

    Manual override facility is standard

    24VDC operation.

    SYSTEM SENSOR OSY2 TAMPER

    SWITCHES

    Fit outside screw and yoke gate valves Easy installation using assembled bolts and openended bottom bracket

    Three position switch gives vandal and valveclosed signals

    Operating shaft is adjustable - no cutting required

    Robust metal construction with weather seal on cover

    Optional alarm switch protects cover from removal.

    UL & FM Approved, 3 Year Warranty

    FIRE ACCESSORIES


Recommended