Fire extinguisher 631 Fire extinguisher boxes 632 Horns & Buzzer...

Fire extinguisher 631

Fire extinguisher boxes 632

Horns & Buzzer 634

Reversing alarms 636

Reversing camera system 639

LEXGUARD 643

Marker signs 645

Hazardous material signs 656

ADR items 659

Marking tape 668

Retro-reflecting tape 669

Reflectors 671

Measuring instruments 678

Deel_1_-V1C4-TOC.mif Page 629 Monday, July 7, 2014 6:17 PM

Deel_1_-V1C4-TOC.mif Page 630 Monday, July 7, 2014 6:17 PM

Saf

ety

and

sign

allin

g pa

rts

631Safety and signalling partsFire extinguisherFire extinguisherFire extinguisher

Fire extinguisher

Fire extinguisher (dry powder)

Dry powder extinguisher. Available in 1-2-6-9 and 12 kg.With mounting support. 6-12 kg fitted with manometer.

Characteristics of dry powder extinguisher:- Does not conduct electricity- Can be used effectively both outside and inside- Not susceptible to frost- Reduces visibility in small spaces- Causes much accessory damage

Fire extinguisher classification:A : Fires burning on solid materials, primarily organic, which normally speaking blaze as they burn: wood, paper, textiles, rubberB : Fires burning on liquids or substances that have become liquid: petrol, benzol, oil, grease, paints, tar, alcoholC : Fires burning on gases: methane, propane, hydrogen, acetylene, natural gas

Description Art.no.1 KG ABC 089512 KG ABC 089533 KG ABC 089556 KG ABC 089619 KG ABC 0896312 KG ABC 08967Mounting support for fire extinguisher 6 KG 08985Mounting support for fire extinguisher 9-12 KG 08986

aFire extinguisher

Deel_1_4.mif Page 631 Monday, July 7, 2014 6:17 PM

Saf

ety

and

sign

allin

g pa

rts632

*Fire extinguisher boxesFire extinguisher boxesFire extinguisher boxes

Fire extinguisher boxes

Fire extinguisher box (toploader)

Toploader. Recyclable polyethylene. Resistant to chemical products. Can be installed on truck or trailer. Sealed using neoprene rubber.

Description Art.no.Fire extinguisher box, 640 x 250 x 250 mmFor 6kg fire extinguisher.

JO JBFR64

supports for JBFR64 - 30/60 degrees. JO KIT65supports for JBFR64 - horizontal. JO KIT56

Fire extinguisher box (toploader)

Toploader. Recyclable polyethylene. Resistant to chemical products. Can be installed on truck or trailer.

Description Art.no.Fire extinguisher box, 650 x 260 x 275 mm, redFor 6kg fire extinguisher.

JO JBFR65

Fire extinguisher box, 750 x 300 x 300 mm, redFor 9-12kg fire extinguisher.

JO JBFR75

Fire extinguisher box, 750 x 300 x 300 mm, blackFor 9-12kg fire extinguisher.

JO JBFB75

supports for JBFR65/JBFR75 - 30/60 degrees. JO KIT55supports for JBFR65/JBFR75 - horizontal. JO KIT56

Fire extinguisher box (front loader)

Front loader. Recyclable polyethylene. Resistant to chemical products. Can be mounted to both truck or trailer. Hinges left or right. Polycarbonate windows, sealing via neoprene rubber. With or without retention belt for extinguisher.

Description Art.no.Fire extinguisher box, 700 x 300 x 253 mmDoor red. For 6k fire extinguishers. With retention belt.

JO JBWE70

Fire extinguisher box, 700 x 300 x 253 mmDoor black. For 6k fire extinguishers. With retention belt.

JO JBWB70

Fire extinguisher box, 700 x 300 x 253 mmCompletely red. For 6k fire extinguishers. Without retention belt.

JO JBWR70

Fire extinguisher box, 700 x 300 x 253 mmDoor red. For 6k fire extinguishers. With rubber retention belt.

JO JBXE70

Fire extinguisher box, 830 x 310 x 263 mm.Door red. For 9-12 k fire extinguishers. With retention belt.

JO JBXE83

Fire extinguisher box, 830 x 310 x 263 mmBlack door. For 9-12kg fire extinguisher. With baggage strap.

JO JBXE83

Fire extinguisher box, 830 x 310 x 263 mm.Door red. For 9-12 k fire extinguishers. Without retention belt.

JO JBXF83

Fire extinguisher box, 830 x 310 x 263 mm.Completely red. For 9-12 k fire extinguishers. With retention belt.

JO JBXR83

support set for JBX70 and 83 series, for mounting on trailer support. JO KIT80Fastener JO KIT-toggleDoor, red, for boxes for 6 kg JO KITJBWR70L

Fire extinguisher box (frontloader)

Frontloader. Recyclable polyethylene. Fitted with clamping closure. Resistant to chemical products. Can be installed on truck or trailer. Hinged left. Polycarbonate pane, sealed using neoprene rubber. With baggage strap.

Description Art.no.Fire extinguisher box, 950 x 435 x 280 mmRed door. For 5 kg CO2 extinguisher with large nozzle.

JO JBWE95


Front loader. Recyclable polyethylene. Resistant to chemical products. Can be mounted to both truck or trailer.

Description Art.no.Fire extinguisher box, 680 x 260 x 260 mm.For 6k fire extinguishers.

JO JBTE68

Cover for JBTE68. JO KITJBTE68L

aFire extinguisher boxes


Saf

ety

and

sign

allin

g pa

rts

633


Front loader. Recyclable polyethylene. Resistant to chemical products. Can be mounted to both truck or trailer. Fitted with wooden bottom plate.

Description Art.no.Fire extinguisher box, 720 x 540 x 270 mm.For 2x 12 k fire extinguishers.

JO JBDB72

Fire extinguisher box, 720 x 540 x 270 mm.For 2x 12 k fire extinguishers.Door red.

JO JBDE72

Fire extinguisher box

Recyclable polyethylene. Equipped with removable cover.

Description Art.no.Fire extinguisher box, 415 x 210 x 145 mmCompletely red. For 2kg fire extinguisher.

JO JFEX03

Fire extinguisher box NATO

Frontloader. Recyclable polyethylene. Resistant to chemical products. Can be installed on truck or trailer. NATO approved for 5 years. Contract A314062/B.

Description Art.no.Fire extinguisher box, 700 x 300 x 253 mm, greenFor 6kg fire extinguisher.

JO JBWM70KZ

Fire extinguisher box, 700 x 300 x 253 mm, redFor 6kg fire extinguisher.

JO JBWE70KZ

supports - vertical/horizontal JO KIT56

Fire extinguisher box NATO

Toploader. Recyclable polyethylene. Resistant to chemical products. Can be installed on truck or trailer. NATO approved for 5 years. Contract A314062/B.

Description Art.no.Fire extinguisher box, 650 x 260 x 275 mm, greenFor 6kg fire extinguisher.

JO JBFM65K

supports - 30/60 degrees. JO KIT55supports - horizontal. JO KIT56

Mounting set

Mounting set for fire extinguisher boxes

Description Art.no.Mounting set JO KIT 50

aFire extinguisher boxes


Saf

ety

and

sign

allin

g pa

rts634

*Horns & BuzzerHorns & BuzzerHorns & Buzzer

Horns & Buzzer

Hella Horn

Metal model, 24V with 2 push-on connections.

Diameter : 112 mm ØHeight : 53 mm

Description Art.no.Horn 24V 3BA 002 768-382

Horn

Metal model. Available in 12 and 24V. 2 push-on connections.


Description Art.no.Horn 12V 00925Horn 24V 00926

Claxon TR99

Plastic housing, 12V. 2 push-on connections. Low tone.

Description Art.no.Claxon TR99 08793

Air horns

JERICHO Air horn fitted with an electromagnetic valve that works with both 12 and 24 Volts. Compact model. Metal housing and plastic horn. Comes with metal connector for 8 mm pipe. Frequency 425 Hz, 118db. OEM equipment on DAF.

Length : 215 mmWidth : 145 mmHorn : 110 mm Ø

Description Art.no.Air horn 08790

Hella Air horn

Single air horn. 12V. Frequency 400 Hz, 118 dB.

Diameter : 119 mm ØLength : 311 mmE-Approval : E1 20027

Description Art.no.Air horn 3PA 004 206-041

aHorns & Buzzer


Saf

ety

and

sign

allin

g pa

rts

635

Hella Buzzer

Buzzer, 24V. 550 Hz.

Diameter : 112 mm ØThickness : 48 mmMounting hole : 8 mm Ø

Description Art.no.Buzzer 3SB 002 768-031

Buzzer

Plastic version. With 2 push-on connections. Available in 12 and 24V. Suitable for warning of insufficient pressure in the air pressure or oil pressure system.


Description Art.no.Buzzer 12V black 00292Buzzer 24V red 00293

aHorns & Buzzer


Saf

ety

and

sign

allin

g pa

rts636

*Reversing alarmsReversing alarmsReversing alarms

Reversing alarms

Reversing alarm Aspöck

- Suitable for 24V- 98 db at 1 m- Plastic housing- Pulsating tone- IP68 waterproof

Diameter : 43 mm ØThickness : 35 mm

Description Art.no.Reversing alarm, with cable 1.2 m, with Aspöck 2 terminal ASS1 connector

75-0000-007

Reversing alarm, with cable 3.5 m, with open end 75-0100-007

Reversing alarm Hella

- Suitable for 12 to 24V- 82 - 102 db.- Plastic housing- With Amp connection- Variable volume, adjusts automatically to ambient noise levels

Length : 101 mmWidth : 46 mmHeight : 74 mm

Description Art.no.Reversing alarm 3SL 009 148-101

Reversing alarm Valeo 87db

- Suitable for 12 to 24V- 87db. 1500 Hz- Black polypropylene housing- Splash proof

Length : 103 mmWidth : 41 mm ØHeight : 76 mm

Description Art.no.Reversing alarm 08791

Reversing alarm Valeo 102db

- Suitable for 12 to 24V- 102db. 1000 Hz- Black polypropylene housing- Splash proof



Reversing alarm

- Suitable for 12 to 24V- 103db. 2700 Hz- Plastic housing, black base

Height : 120 mmWidth : 92 mmLength : 92 mm


Reversing alarm

- Suitable for 12 to 24V- 90db. 3300 Hz- Plastic housing- Splash proof- With additional connection for the tail light, for deactivating the alarm when the tail light is on.

Diameter : 46 mm ØHeight : 60 mmThickness : 50 mm


aReversing alarms


Saf

ety

and

sign

allin

g pa

rts

637

Reversing alarm IP65

- Suitable for 12 to 24V- 90 db. 1000 Hz- Plastic housing- IP65 waterproof- With CE approval

Diameter : 49 mm ØThickness : 46 mm


Reversing alarm

- Suitable for 12 to 24V- 90 db. 1300 Hz.- Plastic housing- Splash proof



Reversing alarm ADR/VLG

- Suitable for 24V- 95 db. 850 Hz.- Plastic housing- Splash proof- Especially for ADR/VLG transport.



Reversing alarm NIGHTSHIFT

Reversing alarm with NIGHTSHIFT technology. This makes it possible to reverse at night in urban areas without causing noise. The sound is switched off or reduced.

- Suitable for 12 to 24V.- 1100Hz- Black plastic housing- Splash proof according to IP67- With CE approval


Description Art.no.Reversing alarm, 90 to 0 dB 08868Reversing alarm, 90 to 78 dB 08869

Reversing alarm BBS TEK 87 db

BBS TEK offers a unique sound, of which the direction and location can be determined accurately. The broadband sound is expressed in several frequencies, which means that its effect causes less nuisance.

- Suitable for 12 to 24V- Black plastic housing- 87db- Non-spark- E and CE-approval- Water resistant according to IP68



aReversing alarms


Saf

ety

and

sign

allin

g pa

rts638

Reversing alarm BBS TEK 92 db

BBS TEK offers a unique sound, of which the direction and location can be determined accurately. The broadband sound is expressed in several frequencies, which means that its effect causes less nuisance.

- Suitable for 12 to 24V- Black plastic housing- 92db- Non-spark- E and CE-approval- Water resistant according to IP68



Reversing alarm SA 400

- Suitable for 12 to 24V- 82-102 db- Plastic housing- IP68 waterproof- With CE approval

Width : 100 mmHeight : 72 mmThickness : 32 mm


Reversing alarm (variable volume)

- Suitable for 12 to 24V- 82-107 db. 1250 Hz.- Metal housing- Splash proof- Variable volume, adjusts automaticallyto surrounding noise.- Complies with SAE J944 norm


Description Art.no.Reversing alarm 12-24V 82-107db 08875

Reversing alarm (variable volume)

- Suitable for 12 to 24V- 87-112 db. 1250 Hz.- Metal housing- Splashproof- Variable volume, adjusts automatically to ambient noise levels- Complies with SAE J944 standard


Description Art.no.Reversing alarm, 12-24V 87-112db 08876

Intertruck BA15s beeper

Reversing lamp and alarm as replacement for standard light bulb 24V - 21W - BA15s


aReversing alarms


Saf

ety

and

sign

allin

g pa

rts

639*Reversing camera systemReversing camera systemReversing camera system

Reversing camera system


General:

Set includes: unheated camera, display, sunshade for display, Distance measurement, 20 metre cable and connectors. With E-approval.

Display

- Black/white - Screen size: 5.5" - Built-in speaker with volume control (front of display) - 2 camera-inputs - Mirror/normal image switches - Contrast & Brightness controls - Automatic rear-view display whenever reverse gear is engaged - Audio/video in- and outputs - Day/night control - Operating voltage: 10V ~ 32V - 5G shock resistant - Operating temperature: -15°C ~ +50°C - Dimensions: 182 x 136 x 200 (WxHxD) - Weight 1.5kg

Camera

- Black/white - Die-cast aluminium housing with sunshade - Built-in microphone - Automatic electronic iris - Electronic brightness adjustment - Ultra low light intenisty 0.5 lux - 1/3" CCD Imaging sensor - 10G Shock resistance - 6 infrared LED's - 120° Wide angle lens - IP67 waterproof - Operating temperature: -30°C ~ +50°C - Dimensions: 69 x 42 x 60 (WxHxD) - Operating voltage: 12V (distributed from display) - Weight 0.4kg

Description Art.no.Additional unheated camera black/white only for display 15522 15510Extension cable 25 m 15520Extension cable 20 m 15521


General:

Set includes: 1 heated camera, display, sunshade for display, Distance measurement, 20 metre cable and connectors. With E-approval.

Display - Black/white - Screen size: 5.5" - Built-in speaker with volume control - 2 camera-inputs - Contrast & Brightness controls - Automatic rear-view display whenever reverse gear is engaged - Day/night control - Audio/video in- and outputs - Operating voltage: 10V ~ 32V - 5G shock resistant - Operating temperature: -15°C ~ 50°C - Dimensions: 176 x 127 x 196 (WxHxD) - Weight 1.5kg

Camera

- Black/white - Built-in microphone - Automatic heating - Automatic shutter - Automatic electronic iris - Ultra low light intenisty 0.5 lux - Mirror/normal image via external switch - 1/3" CCD Imaging sensor - 10G Shock resistance - 120° Wide angle lens - IP67 waterproof - Operating temperature: -30°C ~ +50°C - Dimensions: 103 x 83 x 84 (WxHxD) - Operating voltage: 12V (distributed from display) - Weight 0.5kg

Description Art.no.CAMERA SET 15502Display black/white for set 15502 15525Additional heated camera black/white only for display 15525 15512Extension cable 25 m 15520Extension cable 20 m 15521

aReversing camera system


Saf

ety

and

sign

allin

g pa

rts640


Camera

- Black/white - Automatic heating - Die-cast aluminium housing with sunshade - Built-in microphone - Automatic electronic iris - Electronic brightness adjustment - Ultra low light intenisty 0.5 lux - 1/3" CCD Imaging sensor - 10G Shock resistance - 6 infrared LED's - 120° Wide angle lens - IP67 waterproof - Operating temperature: -30°C ~ +50°C - Dimensions: 69 x 42 x 60 (WxHxD) - Operating voltage: 12V (distributed from display) - Weight 0.4kg

Unlike the heated cameras 15512 and 15513, these cameras do not have a shutter to protect the lens when the camera is turned off.

Description Art.no.Additional heated camera black/white only for display 15525 15527


General:

Set is supplied with unheated camera, LCD screen, control box, remote control, 20-metre cable and connection materials.With E certification. The control box can be used to connect a TV and/or video/DVD to the LCD screen and also acts as the converter for the LCD screen.

LCD screen

- Colour TFT LCD screen - Screen size 6.8" (effective) - Auto dimmer function - Audio/video in and outputs - Integrated speaker with volume control - 3 camera inputs (via control box) - Including remote control - Automatic reversing switch - On-Screen Display - PAL camera inputs - Operating voltage: 12V (via control box) - Operating voltage of control box: 10V ~ 32V - Screen dimensions: 195 x 140 x 28 (BxWxD) - Operating temperature: -10°C ~ +50°C

Camera - Colour - Aluminium die-cast housing with sunshade - Integrated microphone - Automatic iris system - Electronic light intensity adjustment - Minimum light intensity required 0.5 lux - 1/3" CCD imaging sensor - 10G shockproof - 6 infrared LEDs - 120° wide-angle lens - IP67 waterproof - Operating temperature: -30°C ~ +50°C - Dimensions: 69 x 42 x 60 (BxWxD) - Operating voltage: 12V (via control box) - Weight 0.4 kg

Description Art.no.CAMERA SET 15506LCD screen, colour, for set 15506 15524Extra unheated camera, colour 15511Extension cable, 25 metres 15520Extension cable, 20 metres 15521Holder for LCD screen 15516Holder for LCD screen 15517Control box for set 15506 15531



Saf

ety

and

sign

allin

g pa

rts

641


General:

Set includes: 1 heated camera, LCD monitor, control unit, remote control, 20 metre cable and connectors.With E-Approval. The control box can be used for connection of TV and/or video/DVD to the LCD monitor and is also the converter for the LCD monitor.

LCD monitor

- Colour TFT LCD monitor - Screen size 6.8" (effective) - Auto dimmer function - Audio/video in- and outputs - Built-in speaker with volume control - 3 camera-inputs (via control unit) - Remote control - Automatic rear-view display whenever reverse gear is engaged - On Screen Display - PAL camera-inputs - Operating voltage: 12V (via control box) - Operating voltage control box: 10V ~ 32V - Dimensions display: 195 x 140 x 28 (WxHxD) - Operating temperature: -10°C ~ +50°C

Camera

- Colour - Built-in microphone - Integrated heating - Automatic shutter - Automatic electronic iris - Electronic brightness adjustment - Ultra low light intenisty 0.5 lux - Mirror/normal image via external switch - 1/3" CCD Imaging sensor - 10G Shock resistance - 6 infrared LED's - 120° Wide angle lens - IP67 waterproof - Operating temperature: -30°C ~ +50°C - Dimensions: 103 x 83 x 84 (WxHxD) - Operating voltage: 12V (distributed from display) - Weight 0.5kg

Description Art.no.CAMERA SET 15508Additional heated camera colour only for LCD monitor 15526 15513Extension cable 25 m 15520Extension cable 20 m 15521Holder for LCD monitor 15516Holder for LCD monitor 15517


Camera

- Black/white - Automatic heating - Die-cast aluminium housing with sunshade - Built-in microphone - Automatic electronic iris - Electronic brightness adjustment - Ultra low light intenisty 0.5 lux - 1/3" CCD Imaging sensor - 10G Shock resistance - 6 infrared LED's - 120° Wide angle lens - IP67 waterproof - Operating temperature: -30°C ~ +50°C - Dimensions: 69 x 42 x 60 (WxHxD) - Operating voltage: 12V (distributed from display) - Weight 0.4kg

Unlike the heated cameras 15512 and 15513, these cameras do not have a shutter to protect the lens when the camera is turned off.

Description Art.no.Heated camera colour for display 15526 15529

Multi-control box

For connecting additional cameras. The set includes a control box and an LCD panel for the cabin. Power supply to the LCD panel via the control box. Only suitable for unheated cameras.

Specifications

- Audio/video in/outputs - 4 camera inputs with automatic scanning - IAdjustable dwell time - Individual automatic triggering for 4 cameras - Individual volume controls - Mirror/normal image switchable - Auto dimmer function - Operating voltage 12V ~ 42V - Operating temperature: -15°C ~ +50°C

Description Art.no.Multi-control box 15515



Saf

ety

and

sign

allin

g pa

rts642

System socket

Required for mounting the camera on a trailer.

Description Art.no.System plug male 15518System plug female 15519Electro coil 7-core with 2 plugs attached 24V "N" 05072

Extension cable

Description Art.no.Extension cable 15 m, camera-monitor 15530Extension cable 30 m, camera-monitor 15532



Saf

ety

and

sign

allin

g pa

rts

643*LEXGUARDLEXGUARDLEXGuard

LEXGuard

LEXGUARD

LEXGUARD, the active blind-spot system.

The system functions by means of plastic strips placed on the front and sides of the vehicle. The strips are made up of 50 cm pieces that can be joined together with ease.

The strips can identify people as well as objects located in those areas where the strips have been placed, and the system provides a visible and audible warning on the cabin display. This can help to reduce the numerous accidents involving bicycles, for example, which occur every year. The Lexguard system is also suitable for preventing vehicle damage. This helps reduce damage repair costs.

The strips can be placed in various areas. The cabin strips have a detection range of 2 metres. The detection range of the side strips is 1 m.

Sets with a class VI designation cover the area in accordance with the class VI field of view, which entails: 2 metres from the front of the vehicle across the entire width, and 2 metres calculated from the front right side.

As the distance between the object and the vehicle decreases, the intensity of the warning provided on the cabin display increases, warning the driver that he must respond immediately.

Features:- Quick installation.- The functioning of the system is not affected by dirt and weather conditions.- Multi-voltage 12/24 volt.- Compact and functional cabin display.- Control LEDs to verify whether the system is working properly.- Warning provided via visible and audible signal.- Wireless communication between control boxes.

Basic set contains:- 2 control units (one for the cabin strips and one for the side strips.- Cabin display.- 1 vertical strip (50 cm long) for the front right side.- 1 horizontal strip for the front between 50 and 200 cm long, depending on the selected set.- 1 horizontal strip for the side between 100 cm and 400 cm long, depending on the selected set.- Junction box for side strips.- Mounting and connecting material.- Detailed installation instructions.

LEXGUARD - Basic sets

Description Vertical stripright front

Horizontal stripfront

Horizontal stripside

Art.no.

Lexguard set, complete 50 cm 50 cm 100 cm LXG C50 T100Lexguard set, complete 50 cm 50 cm 150 cm LXG C50 T150Lexguard set, complete 50 cm 50 cm 200 cm LXG C50 T200Lexguard set, complete 50 cm 50 cm 300 cm LXG C50 T300Lexguard set, complete 50 cm 50 cm 400 cm LXG C50 T400Lexguard set, complete 50 cm 100 cm 100 cm LXG C100 T100Lexguard set, complete 50 cm 100 cm 150 cm LXG C100 T150Lexguard set, complete 50 cm 100 cm 200 cm LXG C100 T200Lexguard set, complete 50 cm 100 cm 300 cm LXG C100 T300Lexguard set, complete 50 cm 100 cm 400 cm LXG C100 T400Lexguard set, complete, class VI 50 cm 150 cm 100 cm LXG CL6 150 T100Lexguard set, complete, class VI 50 cm 150 cm 150 cm LXG CL6 150 T150Lexguard set, complete, class VI 50 cm 150 cm 200 cm LXG CL6 150 T200Lexguard set, complete, class VI 50 cm 150 cm 300 cm LXG CL6 150 T300Lexguard set, complete, class VI 50 cm 150 cm 400 cm LXG CL6 150 T400Lexguard set, complete, class VI 50 cm 200 cm 100 cm LXG CL6 200 T100Lexguard set, complete, class VI 50 cm 200 cm 150 cm LXG CL6 200 T150Lexguard set, complete, class VI 50 cm 200 cm 200 cm LXG CL6 200 T200Lexguard set, complete, class VI 50 cm 200 cm 300 cm LXG CL6 200 T300Lexguard set, complete, class VI 50 cm 200 cm 400 cm LXG CL6 200 T400

LEXGUARD - cabin/trailer sets

Including 1 control unit, cabin display and mounting material.

Description Vertical stripright front

Horizontal stripfront

Art.no.

Cabin unit 50 cm 50 cm LXG C50Cabin unit 50 cm 100 cm LXG C100Cabin unit, class VI 50 cm 150 cm LXG CL6 150Cabin unit, class VI 50 cm 200 cm LXG CL6 200

aLEXGuard


Saf

ety

and

sign

allin

g pa

rts644

LEXGUARD - trailer/semi-trailer sets

Including 1 control unit, junction box and mounting material.

Description Horizontal stripside

Art.no.

Trailerset 100 cm LXG T100Trailerset 150 cm LXG T150Trailerset 200 cm LXG T200Trailerset 300 cm LXG T300Trailerset 400 cm LXG T400

LEXGUARD - Separate components

Description Art.no.Cabin display LXG D01Control unit cabine LXG B01Control unit trailer LXG B02Junction box LXG V02Strip 50 cm LXG S050Strip 100 cm LXG S100Strip 150 cm LXG S150Strip 200 cm LXG S200Strip 300 cm LXG S300Strip 400 cm LXG S400Strip 50 cm, class VI, horizontal & vertical LXG S050 CL6Central cap LXG K01End cap Pack of 6 pcs. LXG K02

aLEXGuard


Saf

ety

and

sign

allin

g pa

rts

645*Marker signsMarker signsMarker signs

Marker signs

Marker sign "HI class 2" WITH E-Approval

Complies with the European norm ECE 70. Required in the Netherlands since 1 JANUARY 1995 for motorised vehicles, trailers and semitrailers, for which the maximum permissible weight is more than 3500 kg and which were first allowed on the road after the above date. Also required already in many other European countries. The yellow reflective material is 3M-Hight intensity Honeycomb, the red fluorescent material is also 3M. Aluminium base plate. ATTENTION : DO NOT DRILL IN THE YELLOW MATERIAL. Also available with 15 mm wide mounting strips on both sides. These strips have 2 holes of 4 mm Ø. Also available as adhesive model.

With E-Approval

Marker signs "HI class 2" WITH E-APPROVAL FOR MOTORIZED VEHICLES

Description Packing Art.no.Rear marking. Without mounting strips.282 x 130 mm. 1.5 mm thick.

set with 4 pcs 08478

Marker signs "HI class 2" WITH E-APPROVAL FOR MOTORIZED VEHICLES

Description Packing Art.no.Rear marking without mounting strips.565 x 130 mm. 1.8 mm thick.


Rear marking without mounting strips.565 x 130 mm. 1.0 mm thick.


Rear marking adhesive.565 x 130 mm.


Rear marking with mounting strips.595 x 130 mm. 1.5 mm thick.


Rear marking with mounting strips.595 x 130 mm. 1.2 mm thick.


Marker signs "HI class 2" WITH E-MARK FOR MOTOR VEHICLES

Description Art.no.Rear marking. With mounting strips.1160 x 130 mm. thickness 1.5 mm.

08480

Rear marking. Without mounting strips.1130 x 130 mm. thickness 2.0 mm

08484

Marker signs "HI class 2" WITH E-APPROVAL FOR TRAILERS & SEMITRAILERS








Rear marking. Without mounting strips.565 x 195 mm. 1.0 mm thick.


Rear marking. Adhesive.565 x 195 mm.


Rear marking. With mounting strips.595 x 195 mm. 1.5 mm thick.


Rear marking. With mounting strips.595 x 195 mm. 1.2 mm thick.


aMarker signs


Saf

ety

and

sign

allin

g pa

rts646


Description Art.no.Rear marking. With mounting strips.1160 x 195 mm. 1.5 mm thick.

08481

Rear marking. Without mounting strips.1130 x 195 mm. 2.0 mm thick.

08494

Rear marking. Adhesive.1130 x 195 mm.

08444

Marker signs "DG class 3" WITH E-APPROVAL

These marker signs comply with the new French norm 70-01 and are obliged in France since 01-04-2006. Diamond Grade. Aluminium base plate.E-Approval : E3 01 7001

Marker signs "DG class 3" WITH E-APPROVAL FOR MOTORIZED VEHICLES







Description Art.no.Rear marking without mounting strips.1130 x 130 mm. 1.2 mm thick

08162

Marker signs "DG class 3" WITH E-APPROVAL

These marker signs comply with the new French norm 70-01 and are obliged in France since 01-04-2006. Diamond Grade. Aluminium base plate.E-Approval : E3 01 7002

Marker signs "DG class 3" WITH E-APPROVAL FOR TRAILERS & SEMITRAILERS



aMarker signs


Saf

ety

and

sign

allin

g pa

rts

647







Description Art.no.Rear marking without mounting strips.1130 x 195 mm. 1.2 mm thick.

08172

Projecting long load signs

PVC, aluminium or steel. 500 x 500 mm.

Description Art.no.Flat model 3 mm thick PVC, 2 holes 08500Flat model 2 mm thick aluminium 08501Pressed structure 0.6 mm thick steel with supports 08503

Projecting wide load signs

2 mm thick aluminium. 280 x 560 mm.

Description Packing Art.no.Extra wide load set with 2 pcs 08601

Extra wide or extra long projecting load signs

2 mm thick aluminium. 423 x 423 mm

Description Packing Art.no.Extra wide or extra long projecting load set with 2 pcs 08603

Extra wide or extra long projecting load signs

2 mm thick aluminium. 423 x 423 mm. Can be folded over horizontally or vertically, with stainless steel piano hinge.


aMarker signs


Saf

ety

and

sign

allin

g pa

rts648

Projecting wide load signs

2 mm thick aluminium. 140 x 800 mm.

Description Packing Art.no.Extra wide projecting load set with 2 pcs 08609

Projecting wide load signs "BELGIUM"

2 mm thick aluminium. 500x500mm. Sign for frontside with white reflective and red fluorescent stripes. Sign for backside with red reflective and white stripes.

Description Packing Art.no.Extra wide or extra long projecting loadFRONT


Extra wide or extra long projecting loadBACK


Projecting wide load signs "FRANCE"

1 mm thick aluminium. 423x423 mm. Red and white reflective.


Tail lift flags

If the tail lift protrudes from the normal contours of the vehicle, a warning system is mandatory. The available options include reflective tail lift flags. Material is class 2 high intensity grade. Available with or without mounting section. ABG-approved by the German Kraftfahrt-Bundesamt according to ~ K 540 cerfication. Length : 405 mmWidth : 255 mm

Description Art.no.Tail lift flag with aluminium mounting section, left 08454Tail lift flag with aluminium mounting section, right 08455Tail lift flag, left 08456Tail lift flag, right 08457Aluminium mounting section 08453

Container markings

Adhesive. For marking containers that are placed on public roads. A minimum of two signs on each visible surface, preferably vertical. Class A tape (high intensity).

Description Packing Art.no.Container sign705 x 141 mm.


Container sign564 x 141 mm.


aMarker signs


Saf

ety

and

sign

allin

g pa

rts

649

LONG VEHICLE signs

0.8 mm thick aluminium. 1265 x 225 mm. Complies with BSAU 152 norm.

Description Art.no.LONG VEHICLE sign 00354

LONG VEHICLE signs

0.8 mm thick aluminium. 525 x 250 mm. Complies with BSAU 152 norm.

Description Packing Art.no.LONG VEHICLE signs set with 2 pcs 00355

Marker signs "SLOW MOVING VEHICLES"

The signs are available with a thickness of 1, 1.2 and 2 mm and as a adhesive model. With "E"-approval and two pre-drilled mounting holes. Required on all vehicles slower than 25 km/h. Available with red fluorescent or yellow retroreflecting center part.

Height : 355 mm

Description Art.no.Marker sign 2 mm thick, red center part 08505Marker sign 1 mm thick, red center part 08605Marker sign adhesive, red center part 08613Marker sign 1.0 mm thick, yellow center part 08417Marker sign 2 mm thick, yellow center part 08416Mounting support at the sign 08553Mounting support at the vehicle 08554

T.I.R. sign (folding)

Silk-screen printed model. Aluminium. Folding. With stainless-steel piano hinge. Blue background, white lettering. and is 2mm thick. 400 x 250 mm.

Description Art.no.T.I.R. sign, complete with extra swivel lock 08543Swivel lock (loose) old version 08546Swivel lock (loose) new version 08201

T.I.R. sign

Screen printed version. Blue background, white lettering. 1 mm thick. 400 x 250 mm.

Description Art.no.T.I.R. sign 08548

aMarker signs


Saf

ety

and

sign

allin

g pa

rts650

Sign "WIDE LOAD"

2 mm thick aluminium. 1160 x 200 mm. Black letters on white, reflecting background with red rim.

Description Art.no.Sign WIDE LOAD 08619

Sign "VEEVERVOER"

Aluminium, red surface with white letters, 1mm thick 615 x 105 mm.

Description Art.no.VEEVERVOER sign 08541

Sign "VLEESVERVOER"

Yellow background with black letters. 760 x 115 mm.

Description Art.no.VLEESVERVOER sign aluminium 08544

SIGN "PAS OP ! ZWENKT UIT"

Pressed model. Aluminium. Red background with white letters.1 mm thick. 900 x 210 mm.

Description Art.no.PAS OP ! ZWENKT UIT sign 08545

Sign "UITZONDERLIJK VERVOER" / "CONVOI EXCEPTIONNEL"

Aluminium. Available with text on one side in Dutch or on both sides with Dutch/French text. 2 mm thick. 730 x 300 mm.

Description Art.no.Text on one side DutchRed background with black letters.

08510

Text on both sides Dutch/FrenchRed background with black letters.

08512


Aluminium. Available with text on one side in Dutch or on both sides with Dutch/French text. 2 mm thick. 1175 x 200 mm.

Description Art.no.Text on one side DutchRed background with black letters.

08511

Text on both sides Dutch/FrenchRed background with black letters.

08513

aMarker signs


Saf

ety

and

sign

allin

g pa

rts

651

Sign "UITZONDERLIJK VERVOER"

Aluminium. Text on one side Dutch. 2 mm thick. 1175 x 200 mm.

Description Art.no.Text on one side Dutch.Yellow background with black letters.

08531


Aluminium. Available with text on one side French or on both sides with Dutch/French text. 2 mm thick. 730 x 300 mm.

Description Art.no.Text on one side French. Yellow background with black letters. 08534Text on both sides Dutch/French. Dutch: red background with black letters. French: yellow background with black letters.

08564


Aluminium. Available with one-sided print in French or two-sided print in Dutch/French. and is 2mm thick. 1175 x 200 mm.

Description Art.no.One-sided text, French. Yellow background with black lettering. 08535Two-sided text, Dutch/French. Dutch, red background with black lettering.French, yellow background with black lettering.

08565

Two-sided text, Dutch/French. Both sides yellow background with black lettering. 08568


Aluminium or self-adhesive. Available with one-sided print in French or two-sided print in Dutch/French. and is 2mm thick. 1200 x 400 mm. Diamond Grade.

Description Art.no.Aluminium. One-sided text, French. Yellow background with black lettering. 08381Aluminium. Two-sided text, Dutch/French. Dutch, red background with black lettering. French, yellow background with black lettering.

08382


Aluminium or adhesive. Available with text on one side French or on both sides with Dutch/French text. 2 mm thick. 1900 x 250 mm. Diamond grade.

Description Art.no.Adhesive. Text on one side French. Yellow background with black letters. 08383Aluminium. Text on one side French. Yellow background with black letters. 08384Aluminium. Text on both sides Dutch/French. Dutch, red background with black letters. French, yellow background with black letters.

08385

Sign "UITZONDERLIJK VERVOER" / "TRANSPORT EXCEPTIONNEL" / "SCHWERTRANSPORT"

Aluminium. One-sided print. and is 2mm thick. 1250 x 250 mm. According to specification of Belgian law.

Description Art.no.Uitzonderlijk vervoer. Yellow background with black lettering. 08340Uitzonderlijk vervoer. Orange background with black lettering. 08390Transport exceptionnel. Yellow background with black lettering. 08341Transport exceptionnel. Orange background with black lettering. 08391Schwertransport. Yellow background with black lettering. 08342Schwertransport. Orange background with black lettering. 08392

aMarker signs


Saf

ety

and

sign

allin

g pa

rts652



Description Art.no."Transport exceptionnel" and "Uitzonderlijk vervoer". Yellow background with black lettering. 08343"Transport exceptionnel" and "Uitzonderlijk vervoer". Orange background with black lettering. 08393"Uitzonderlijk vervoer" and "Schwertransport". Yellow background with black lettering. 08344"Uitzonderlijk vervoer" and "Schwertransport". Orange background with black lettering. 08394"Transport exceptionnel" and "Schwertransport". Yellow background with black lettering. 08345"Transport exceptionnel" and "Schwertransport". Orange background with black lettering. 08395



Description Art.no."Transport exceptionnel", "Uitzonderlijk vervoer" and "Schwertransport". Yellow background with black lettering.

08346

"Transport exceptionnel", "Uitzonderlijk vervoer" and "Schwertransport". Orange background with black lettering.

08396

Sign "CONVOI AGRICOLE" France

Aluminium. One-sided print French. 1 mm thick. 1900 x 250 mm. Yellow/black.

Description Art.no."Convoi agricole" 08398

LZV sign

Mandatory marking achterste voertuig LZV trailer/combination in other European countries than the Netherlands.Since November 2011, vehicles longer than 18.75 metres, with a maximum of 25.25 metres, must have a new type of marker sign. It should depict the type of lorry combination.

Description Type Art.no.Tractor unit - semi-trailer - central axle trailer A 08180Tractor unit - semi-trailer (with support point) - semi-trailer B 08181Lorry - trailer (length: > 18.75 m) C 08182Lorry - dolly - semi-trailer D 08183Lorry - semi-trailer - semi-trailer E 08184

LZV sign

Mandatory marking rear of vehicle of LZV trailer/combination in the Netherlands.Vehicles longer than 18.75 metres, with a maximum of 25.25 metres, must have a new type of marker sign. It should have the following description: 'LET OP! EXTRA LANG'. This new regulation replaces the previous one, dating from November 2011. From the 1st of January 2014 all LZV's should have this sign.

Description Art.no.LZV sign 2013 - 1130x196x 2mm 08194LZV sign set 2013 - 565x196x2 mm 08195LZV sign 2013 left - 565x196x2 mm 08196LZV sign 2013 right - 565x196x2 mm 08197

aMarker signs


Saf

ety

and

sign

allin

g pa

rts

653

LZV sign holder

Holder with hinge point.

Description Art.no.LZV sign holder, stainless steel, blank, 1222x210 mm 08187LZV sign holder, stainless steel, sprayed black, 1222x210 mm 08188LZV sign holder, stainless steel, rough, 617x206 mm 08198LHV sign holder, stainless steel, sprayed black, 617x206 mm 08198

Sign "WERKVERKEER"

Aluminium or adhesive. In conformance with guidelines for work under construction on motorways, publication 1996A. Black letters on yellow, reflecting background. Available in Engineering Grade or High Intensity. 1500 x 300 mm.

Description Art.no.Sign 'WERKVERKEER' 2 mm thickEngineering Grade

08600

Sticker 'WERKVERKEER' adhesiveEngineering Grade

08600ST

Sign 'WERKVERKEER' 2 mm thick.High Intensity ECE70

08539

Sticker 'WERKVERKEER' adhesive.High Intensity ECE70

08537

Sign "WERKVERKEER"

Various models. Black letters on yellow, reflecting background. Engineering Grade. 400 x 110 mm.

Description Art.no.Sign werkverkeer, aluminium 48633Sticker werkverkeer 48632Sign werkverkeer, magnetisch 48631Sign werkverkeer, plastic with 2 suction pads 48630

Stop sign on pole

Stop sign on pole. White-reflective with red edges. Approved for Belgian special transport regulations. 2 of these are mandatory.

Description Art.no.Stop sign on pole, 15 cm. Ø. 83034Stop sign on pole, 20 cm. Ø. 83033

Speed indications NETHERLANDS

Adhesive. Diameter 240 mm Ø.

Description Art.no.16KM adhesive 4860025KM adhesive 4860140KM adhesive 4860250KM adhesive 4860360KM adhesive 4860470KM adhesive 4860580KM adhesive 4860690KM adhesive 48607

100KM adhesive 48608

aMarker signs


Saf

ety

and

sign

allin

g pa

rts654

Speed indications NETHERLANDS

Aluminium. White with black letters and numbers. Red edge. 1 mm thick. Diameter 240 mm Ø.

Description Art.no.16KM aluminium 4856125KM aluminium 0854240KM aluminium 4856250KM aluminium 4856370KM aluminium 4856580KM aluminium 4856690KM aluminium 48567

100KM aluminium 48568

Speed indications BELGIUM

Adhesive. Diameter 210 mm Ø.

Description Art.no.40KM adhesive 4862060KM adhesive 4862170KM adhesive 4862280KM adhesive 4862390KM adhesive 48624

Speed indications BELGIUM

Aluminium. White with black letters and numbers. Red edge. 1 mm thick. Diameter 210 mm Ø.

Description Art.no.40KM aluminium 4857060KM aluminium 4857170KM aluminium 4857280KM aluminium 4857390KM aluminium 48574

Speed indication FRANCE

Self-adhesive. Diameter 200 mm Ø.

Description Art.no.60 KM, self-adhesive 4861570 KM, self-adhesive 4861880 KM, self-adhesive 4861690 KM, self-adhesive 48617

Speed indications GERMANY

Aluminium. White with black letters and numbers. 1 mm thick. Suitable for use in Germany.Diameter 200 mm Ø.

Description Art.no.25KM aluminium 4858240KM aluminium 48583

Sticker 'No smoking'

Sticker 'No smoking'.

Description Art.no.Sticker 90 mm Ø 08988Sticker 150 mm Ø 08989

aMarker signs


Saf

ety

and

sign

allin

g pa

rts

655

A-sign

Aluminium. Mandatory for transporting all kinds of waste in and to Germany. White-reflective with black lettering. Available as fixed, horizontally or vertically folding models. Comes with two metal hinges. thickness 1.5 mm. 300 x 400 mm.

Description Art.no.A-sign 08610A-sign, vertically folding 08611A-sign, horizontally folding 08612Swivel lock old version 08546Swivel lock new version 08201

Marker sign "LOW NOISE LEVEL"

"Metal or adhesive. L-symbol ""Lärmarm"", (low noise level). In combination with a declaration of the manufacturer of the vehicle, this sign permits truck/trailer transport at night in Austria. Green background with white letter,1 mm thick. Diameter 210 mm Ø"

Description Art.no.L-bord, metal 08631L-bord, adhesive 08630

Marker sign "ENVIRONMENTAL FRIENDLY"

"Metal or adhesive. U-symbol ""Umweltfreundlich"" (environmental friendly). Applicable in Austria. In combination with CEMT document, regarding emission of harmful substances. Green background with white letter, 1 mm thick. Diameter 210 mm Ø"

Description Art.no.U-bord, metal 08633U-bord, adhesive 08632

Country stickers

Country stickers, oval, self-adhesive, 175 x 115 mm.

Description Art.no.Netherlands (NL) 08559Denmark (DK) 08620United Kingdom (GB) 08621Belgium (B) 08622Germany (D) 08623Norway (N) 08624Russia (RUS) 08627Poland (PL) 08628

EU sticker

EU sticker, oval, adhesive, 117 x 110 mm.

Description Art.no.Sticker 08626

aMarker signs


Saf

ety

and

sign

allin

g pa

rts656

*Hazardous material signsHazardous material signsHazardous material signs

Hazardous material signs

Hazardous material signs

Orange reflecting center area with or without 1.5 cm wide black border. 300 x 400 mm.

Description Art.no.Sign with black edge for direct mounting.aluminium

1 mm 08502

Sign with black edge for direct mounting.galvanised steel

0,8 mm 08602

Sign without black edge for mounting in plate holder.Aluminium

1 mm 08506

Sign without black edge for mounting in plate holder.Galvanised steel

0,8 mm 08606

Plate holders

Stainless steel model. Black painted. For hazardous material sign. Available for 1 or 3 signs.

Description Art.no.Plate holder for 1 sign 08550Plate holder for 3 signs 08557Cover sleeve for ADR & hazardous material sign 300 x 400 mm.Non-inflammable. Made of Class 2 material.

08354

Hazardous material signs, FOLDING

Aluminium. Stainless-steel piano or metal hinge. Vertically or horizontally folding. 300 x 400 mm.

Description Art.no.Sign, vertically folding with extra swivel lock. Heavy Duty.2 mm. Stainless-steel piano hinge.

08507

Sign, vertically folding with extra swivel lock. 1.2 mm. Two metal hinges. 08607Sign, horizontally folding with extra swivel lock. 1.2 mm. Two metal hinges. 08608Sign, horizontally folding with extra swivel lock, Heavy Duty. 2 mm. Stainless-steel piano hinge. 08562Swivel lock (loose) old version 08546Swivel lock (loose) new version 08201

Hazardous material signs, FOLDING

Aluminium. Stainless-steel piano hinge. Vertically folding. 120 x 300 mm. Thickness 2 mm. Legally permitted in locations where the vehicle does not have room for a 300 x 400 mm sign.

Description Art.no.Sign, vertically folding.With extra swivel lock. Heavy Duty.

08614

Swivel lock old version 08546Swivel lock new version 08201

aHazardous material signs


Saf

ety

and

sign

allin

g pa

rts

657

08355083590835108353

Hazardous material signs WITH INTERCHANGEABLE NUMBERS

Stainless steel holder and numbers. All possible combinations can be acquired by sliding the numerals into the holder. Supplied complete with support, plate holder and numeral-set in bag. 300x400mm.

Dimensions of numerals: 135 x 93 mm

Number of numerals in set: 0 : 2 pcs1 : 3 pcs2 : 3 pcs3 : 3 pcs4 : 2 pcs5 : 2 pcs6 : 4 pcs7 : 2 pcs8 : 3 pcsLetter X : 1 pcBlank : 2 pcs

Description Art.no.Hazard code sign stainless steel complete 08355Figure-code sign complete heavy duty stainless steel 08359Separate holder heavy duty stainless steel 08358Stainless steel holder for 08353 08351Separate plate holder stainless steel, for inserting numerals (08352), old version 08357Separate holder stainless steel for 08351 08353Number set stainless steel (27 pcs) in bag. 08352Cover sleeve for ADR & hazardous material sign 300 x 400 mm. Non-inflammable. Class 2 material.

08354

0 083601 083612 083623 083634 083645 083656 083667 083678 08368X 08369Blank 08370

Hazardous material sign WITH CODE

Galvanised/painted steel. Pressed version. 1 mm thick. 300 x 400 mm.

Description Art.no.Sign with code 20/1046 08250Sign with code 22/1951 08234Sign with code 22/1963 08249Sign with code 22/1977 08236Sign with code 22/2187 08245Sign with code 225/1073 08242Sign with code 23/1049 08235Sign with code 23/1965 08219Sign with code 23/1969 08208Sign with code 30/1202 08514Sign with codes 30/1202 & 33/1203 08223Sign with code 30/1223 08515Sign with code 30/1863 08210Sign with code 30/3256 08226Sign with code 30/3295 08231Sign with code 32/1993 08246Sign with code 33/1203 08516Sign with code 33/1265 08247Sign with code 33/1268 08211Sign with code 33/1863 08212Sign with code 33/1993 08244Sign with code 33/3295 08224Sign with code 33/3475 08260Sign with code 331/1223 08220



Saf

ety

and

sign

allin

g pa

rts658

Sign with code 338/2924 08273Sign with code 40/1325 08243Sign with code 40/1373 08240Sign with code 40/3175 08239Sign with code 42/1364 08248Sign with code 423/3170 08241Sign with code 43/3170 08221Sign with code 43/3208 08222Sign with code 462/1408 08213Sign with code 50/1486 08251Sign with code 50/2067 08225Sign with code 50/2070 08215Sign with code 60/3288 08227Sign with code 70/2913 08261Sign with code 70/2915 08262Sign with code 70/3321 08263Sign with code 80/1759 08274Sign with code 80/1779 08218Sign with code 80/1789 08217Sign with code 80/1824 08229Sign with code 80/2582 08254Sign with code 80/2794 08233Sign with code 80/3260 08238Sign with code 80/3263 08264Sign with code 80/3264 08228Sign with code 90/2590 08214Sign with code 90/3077 08255Sign with code 90/3082 08517Sign with code 99/1257 08252Sign with code 99/3257 08230Sign with code 125/1073 08237Sign with code X99/3257 08232Stainless-steel mounting support 08552

Description Art.no.



Saf

ety

and

sign

allin

g pa

rts

659*ADR itemsADR itemsADR items

ADR items

ADR label

Adhesive safety signs for use at transport of hazardous material.300 x 300 mm.

ADR label 1.1

Description Art.no.ADR label 1.1 - explosive material 48510

ADR label 1.4


ADR label 1.5


ADR label 1.6


ADR label 2.1

Description Art.no.ADR label 2.1 - combustible gases 48520

ADR label 2.2

Description Art.no.ADR label 2.2 - non-combustible/non-toxic gases 48521

ADR label 2.3

Description Art.no.ADR label 2.3 - toxic gases 48522

ADR label 3

Description Art.no.ADR label 3 - combustible liquids 48525

aADR items


Saf

ety

and

sign

allin

g pa

rts660

ADR label 4.1

Description Art.no.ADR label 4.1 - combustible solid material 48528

ADR label 4.2

Description Art.no.ADR label 4.2 - possible self-igniting material 48529

ADR label 4.3

Description Art.no.ADR label 4.3 - combustible material, in case of water contact

48530

ADR label 5.1

Description Art.no.ADR label 5.1 - oxydising material 48533

ADR label 5.2

Description Art.no.ADR label 5.2 - organic peroxides 48534

ADR label 6.1

Description Art.no.ADR label 6.1 - toxic material 48537

ADR label 6.2

Description Art.no.ADR label 6.2 - infectious material 48538

ADR label 7A

Description Art.no.ADR label 7A - radioactive material 48541

ADR label 7B

Description Art.no.ADR label 7B - radioactive material 48542

aADR items


Saf

ety

and

sign

allin

g pa

rts

661

ADR label 7C

Description Art.no.ADR label 7C - radioactive material 48543

ADR label 7E

Description Art.no.ADR label 7E - fissionable material 48545

ADR label 8

Description Art.no.ADR label 8 - corrosive material 48549

ADR label 9

Description Art.no.ADR label 9 - various materials and objects 48552

ADR label 9 - Environmentally hazardous substances

Description Art.no.ADR label 9 Environmentally hazardous substances 48557

Hazardous material sign 9 Transport above 20° c

Description Art.no.Hazardous material sign 9 Transport above 20° c 48550

ADR label Marine Pollutant

Description Art.no.ADR label Marine Pollutant 48560

Hazard sign

Hazard sign, 250 x 250 mm

Description Art.no.ADR sign "limited contents" 48509

ADR sign, limited contents, FOLDING

Indication for limited amount of hazardous substances.Aluminium base plate, 1 mm, with swivel lock. Vertically folding. 250x250 mm.

Description Art.no.Sign, ADR 48508

aADR items


Saf

ety

and

sign

allin

g pa

rts662

Backplate

Backplate. Aluminium or magnetic type for mounting of ADR labels. 300 x 300 mm.

Description Art.no.Aluminium backplate 2 mm thick 48501

Plate holder

Stainless steel or galvanised model, for ADR labels.

Description Art.no.Plate holder for ADR labels, stainless steel 48503Plate holder for ADR labels, galvanised 48504

Mounting support

Mounting support for plate holder, stainless steel.

Description Art.no.Mounting support for plate holder, stainless steel 48505

Sticker ROUND

Red, 57 mm diameter. Class 2. For i.a. road tankers.

Description Packing Art.no.Sticker pack with 6 pcs 08418

Sticker RECTANGULAR

Red, 52x30mm. Class 2. For i.a. road tankers.

Description Packing Art.no.Sticker pack with 6 pcs 08419

ADR KIT

For road transport class 1-6, 8, 9 throughout Europe.

Contents:Case B-2Sticker VLG-ADRAcid protection safety goggles anti condensationNeoprene gloves size 10Half mask M755 ABEKEye wash bottle 500 ml.Chemicals overall cat. 3 cl. 4,5,6Acid-resistant boots size 44Orange safety vest with reflectionATEX-approved torch EEX cat. 2 zone 1Absorption mat setSpark-free shovelBrush coconutFirst-aid box

Extras in case:ADR checklist for control and re-orderingMulti-lingual description about case as chemical storage container.

Description Art.no.KIT-VLG ADR cl. 1 - 6, 8, 9 83000

ADR Case

Case B-2, also usable as receptacle with a content of 26 l.

Description Art.no.Case B-2 blue, without content 83010

aADR items


Saf

ety

and

sign

allin

g pa

rts

663

ADR Sticker

Dimensions : 10 x 4 cm

Description Art.no.Sticker VLG-ADR 83011

Safety goggles

Protective goggles, flexible with acetate glass. Anti-condensation. EN 166

Description Art.no.Safety goggles 83012

Gloves neoprene

Suitable for handling chemicals such as acids, fats, solvents and oils. Shank length 30 cm. EN 388/374

Description Art.no.Neoprene gloves size 10 83013

Boots, acid resistant

Safety boots.

Description Art.no.Boots, size 44 83032

Half mask

Mask, class 1 ABEK, made from anti-allergen thermoplastic rubber. Fitted with double filters, storability filters appr. 4.5 to 5 years.

Description Art.no.Half mask incl. filters 83014Spare filter ABEK1 (set of 2) 83009

Eye wash bottle

Bottle 500 ml. NaCL 0.9% sterile 0344. With eye wash. Storability approximately 3 years.

Description Art.no.Eye wash bottle 83015

Overall chemical-resistant

Dustproof. Offers protection against dangerous materials in powder form, drops, mist, and direct sprays with liquid chemicals. Equipped with hood and elastic in sleeves and trouser-legs. Yellow, category 3, type 4,5,6.

Description Art.no.Overall chemical-resistant 83016

Safety vest

Vest with reflecting bands. For use within Europe. EN 471

Description Art.no.Safety vest orange 83018

aADR items


Saf

ety

and

sign

allin

g pa

rts664

Torch

Meets the conditions for explosive-resistant lighting equipment. Supplied with 2 penlite AA-batteries.ATEX approval EEX cat. ll zone 1.

Description Art.no.Torch incl. batteries 83008

Absorption mats

Set containing 5 mats 52 x 41 cm, can be split into 10 pieces using perforation. Suitable for absorbing oil products, bases, acids, solvents, anti-freeze and aggressive chemicals. After use, the mats can be cleaned and re-used. Absorption ability: 2.5 l

Description Art.no.Absorption mat set 83020

Shovel

Plastic, dimensions 41 x 30 cm.

Description Art.no.Shovel, plastic 83021

Hand brush

Wooden handle with coconut.

Description Art.no.Hand brush 83022

First aid box S-3

Meets all norms for road transport within Europe. The content meets the specific Dutch norms and DIN 13164 obligatory in Germany.

Description Art.no.First aid box S-3 without wall holder 83029First aid box S-3 with wall holder 83030

First aid box bus

The first aid box complies with the requirements for the professional transport of passengers. The first aid kit includes a wall holder.

Description Art.no.First aid box with wall holder 83031

Sewer cover tarpaulin

Set with 2 cover tarpaulins 1.5 x 1.5 m. Chemical-resistant plastic 100 mU PE. For covering street swirls and sewer catch pit. Officially not obligatory in ADR kit.

Description Art.no.Sewer cover tarpaulins 83023

Cone 30 cm

Soft PVC. Orange with white reflecting band.

Description Art.no.Cone 30 cm 83024

aADR items


Saf

ety

and

sign

allin

g pa

rts

665

Cone 50 cm

Soft PVC. Orange with 2 white reflecting bands.

Description Art.no.Cone 50 cm 83025

Warning tape

PVC version. Available in red/white or yellow/black. Width 7 cm.

Description Packing Art.no.Warning tape red/white 200 m 08458Warning tape red/white 500 m 83026Warning tape yellow/black 500 m 83027

Dispenser box for warning tape

For easily rolling out and cutting off warning tape.

Description Art.no.Dispenser box 83028

Safety chest

Recyclable polyethylene. Polycarbonate panes, sealing via neoprene rubber. Left or right hinged. Available with plastic fastening or key behind breakable pane.

Description Packing Art.no.Safety chest with breakable pane, 720 x 540 x 270 mm

JO JBKA72

Safety chest with plastic fastening, 720 x 540 x 270 mm

JO JBDA72

Safety chest with breakable pane, 850 x 540 x 375 mm

JO JBKA85

Plastic shelves 72 series set with 2 pcs JO KITSHELF72Plastic shelves 85 series set with 2 pcs JO KITSHELF85Breakable pane set for JBKA series JO KIT81Spare keys for JBKA series pack with 10 pcs JO KIT91

Safety chest

Recyclable polyethylene. Resistant to chemical products. Sealed using neoprene rubber. Left or right hinged. With plastic fastening. Cover green, box black.

Description Art.no.Safety chest, 700x300x253. JO JBWA70

Box for absorption material.

All grey plastic. For storing absorption material in ADR-vehicles. Fitted with anti-static strip.

Dimensions : 650 x 260 x 275 mmCapacity : 59 l

Description Art.no.Box for absorption material. JO JBEA66T

aADR items


Saf

ety

and

sign

allin

g pa

rts666

Oil absorption material

For absorbing spilt oil on a hard surface or floating on water. Set consists of 25 mats, 1 cushion, 4 hoses, 1 litter bag and 1 binder.

Description Art.no.Oil absorption set JO SPILLKIT

Sand and grit box

Available in 3 colours. For indoor/outdoor storage of grit, sand, salt, chemical and absorption products.

Dimensions : 570 x 650 x 500 mmCapacity : 110 l

Description Art.no.Sand and grit box, red JO JBS65P-CORESand and grit box, yellow JO JBS65P-COYESand and grit box, green JO JBS65P-COGR

Shovel

All plastic.

Dimensions shovel : 23 x 17 x 9 cm

Description Art.no.Shovel, plastic JO WIN-A607

Stickers First Aid

Dimensions : 11.7 x 7.7 cm

Description Packing Art.no.Stickers First Aid pack with 10 pcs JO KIT-LAB-FIRST

Stickers Spill Kit


Description Packing Art.no.Stickers spill kit pack with 10 pcs JO KIT-LAB-SPILL

Stickers Fire


Description Packing Art.no.Stickers Fire pack with 10 pcs JO KIT-LAB-FIRE

Warning light

Warning light with work lamp. Plastic version. Halogen light bulb. 5 batteries 1.5V (LR20, not included). Foldable metal support.Plastic suitcase available separately.


Description Art.no.Lamp complete. ULO 5768-01Lamp complete. IP54. ADR/GGVS approved. ULO 5768-02Plastic suitcase. ULO 2220-01

aADR items


Saf

ety

and

sign

allin

g pa

rts

667

Warning light LED

Compact warning light with integrated work lamp. Black plastic housing.

Fitted with orange and white LED's. Operates on 4 x 1.5V AAA batteries (not included) and has an operating time of appr. 240 hours. ADR/GGVS approved.

Dimensions: 220 x 80 x 65 mm

Description Art.no.Lamp complete (excl. batteries) ULO 5767-12

Warning light 3003

Warning light with work lamp. Plastic lamp housing. Power supply, 5 batteries, 1.5V (LR20, not included). With integrated battery tester. (Hella)

Description Art.no.Lamp complete 2XW 007 146-001

Warning triangle

Solid construction with stand. Complies with European norm no. 27. Comes in container.E-Approval : E8 27R 03 9809 - (08599)

Description Art.no.Warning triangle complete 08599

aADR items


Saf

ety

and

sign

allin

g pa

rts668

*Marking tapeMarking tapeMarking tape

Marking tape

Marking tape

Adhesive, non-reflecting. Used to mark side guards.

Description Art.no.Marking tape 1000 x 92 mm 08528Marking tape 1000 x 45 mm 08558

PVC Tape

Universal warning tape red/white striped. Adhesive. Available as reflectiveand non-reflective tape. Available in lengths of 50, 100 or 150 mm and hights of 11.5, 20 or 25 meter.

Description Art.no.PVC tape red/white, right, 10 x 200 cm, klasse 1 08555PVC tape red/white, left, 10 x 200 cm, klasse 1 08556

PVC Tape

Universal warning tape yellow/black striped. Adhesive. Available as reflective and non-reflective tape. Not suitable for vehicle marking.

Dimensions : 50 mm x 11.5 m

Description Art.nrPVC tape yellow/black, right 08731PVC tape yellow/black, left 08732PVC tape yellow/black, right, reflecting 08733PVC tape yellow/black, left, reflecting 08734

aMarking tape


Saf

ety

and

sign

allin

g pa

rts

669*Retro-reflecting tapeRetro-reflecting tapeRetro-reflecting tape

Retro-reflecting tape

Retro-reflecting tape

Regulation 48 is in force across Europe since 1 January 2008.

This Act states:

Applies to all new vehicles over 7.5 tons GVW.

Colour of tape : White, yellow or red.

Contour- or line marking:Side : Corners at the top horizontal / vertical with a minimum of 50 cm.

: Line at the bottom for at least 80% of the total length.Rearside : Total contour.

Avery retro-reflecting tape

Description Packaging Art.no.Marking tape, white, for hard surfaces roll of 50m 08420Marking tape, yellow, for hard surfaces roll of 50m 08422Marking tape, red, for hard surfaces roll of 50m 08424Marking tape, white, for hard surfaces roll of 12.5 m 08445Marking tape, yellow, for hard surfaces roll of 12.5 m 08446Marking tape, red, for hard surfaces roll of 12.5 m 08447

Avery retro-reflecting tape

Description Packing Art.no.Marking tape white (for soft surfaces) roll with 50 m 08425Marking tape yellow (for soft surfaces) roll with 50 m 08426Marking tape red (for soft surfaces) roll with 50 m 08427

Avery retro-reflecting tanker tape

Description Packing Art.no.Marking tape for tankers white roll with 50 m 08441Marking tape for tankers yellow roll with 50 m 08442Marking tape for tankers red roll with 50 m 08443

Reflexite retro-reflecting tape


Reflexite retro-reflecting tape

Description Packing Art.no.Marking tape white (for soft surfaces) roll with 50 m 08435Marking tape yellow (for soft surfaces) roll with 50 m 08436Marking tape red (for soft surfaces) roll with 50 m 08437

aRetro-reflecting tape


Saf

ety

and

sign

allin

g pa

rts670

Reflexite retro-reflecting tanker tape

Description Packaging Art.no.Marking tape for tankers, white roll of 50m 08438Marking tape for tankers, yellow roll of 50m 08439Marking tape for tankers, red roll of 50m 08440Marking tape for tankers, white roll of 10 m 08469Marking tape for tankers, yellow roll of 10 m 08470Marking tape for tankers, red roll of 10 m 08471

3M retro-reflecting tape


3M retro-reflecting tape

Description Packaging Art.no.Marking tape, white, for soft surfaces, continuous roll of 50m 84606Marking tape, yellow, for soft surfaces, continuous roll of 50m 84608Marking tape, red, for soft surfaces, continuous roll of 50m 84610Marking tape, white, for soft surfaces, segmented roll of 50m 84600Marking tape, yellow, for soft surfaces, segmented roll of 50m 84602Marking tape, red, for soft surfaces, segmented roll of 50m 84604

3M Retroreflecting tankertape

Description Packing Art.no.Reflecting tape for tankers, yellow roll of 12,5 m 84624Reflecting tape for tankers, white roll of 12,5 m 84626Reflecting tape for tankers, red roll of 12,5 m 84628Reflecting tape for tankers, yellow roll of 50 m 84618Reflecting tape for tankers, white roll of 50 m 84620Reflecting tape for tankers, red roll of 50 m 84622

aRetro-reflecting tape


Saf

ety

and

sign

allin

g pa

rts

671*ReflectorsReflectorsReflectors

Reflectors

Adhesive reflectors round

Adhesive reflector. Plastic, available in various colours and diameters.E-Approval : E13 0485 - (08570)E-Approval : E13 0485 - (08571)E-Approval : E13 0485 - (08572)E-Approval : E13 0493 - (08587)E-Approval : E13 0493 - (08588)E-Approval : E1 0231330 R3 - (08589)

Description Art.no.Adhesive reflector orange 60 mm Ø 08570Adhesive reflector red 60 mm Ø 08571Adhesive reflector white 60 mm Ø 08572Adhesive reflector orange 80 mm Ø 08587Adhesive reflector red 80 mm Ø 08588Adhesive reflector white 80 mm Ø 08589

Adhesive reflectors round Hella 002 014

Adhesive reflector. Plastic. Available in various colours.

Diameter : 60 mm ØE-Approval : E2 01 330 - (8RA 002 014-081/091/101)

Description Art.no.Adhesive reflector, orange 8RA 002 014-101Adhesive reflector, red 8RA 002 014-081Adhesive reflector, white 8RA 002 014-091

Adhesive reflectors round ULO 5030


Outer diameter : 60 mm ØE-Approval : E1 0131233 R3 (ULO 5030)

Description Art.no.Reflector red ULO 5030-01Reflector orange ULO 5030-03

Adhesive reflectors round ULO 3775

Adhesive reflector. Plastic, available in various colours.

Outer diameter : 80 mm ØE-Approval : E1 0121281 R3 (ULO 3775)

Description Art.no.Reflector orange ULO 3775-03Reflector red ULO 3775-01Reflector white ULO 3775-02

Mountable reflector round

Mountable reflector. Plastic, available in various colours and diameters.

Mounting hole : 6 mm ØE-Approval : E13 0490 - (08593)E-Approval : E13 0490 - (08594)E-Approval : E13 0990 - (08595)E-Approval : E1 0231329 R3 - (08596)E-Approval : E13 0492 - (08597)E-Approval : E1 0231329 R3 - (08598)

Description Art.no.Mountable reflector orange 62 mm Ø 08593Mountable reflector red 62 mm Ø 08594Mountable reflector white 62 mm Ø 08595Mountable reflector orange 80 mm Ø 08596Mountable reflector red 80 mm Ø 08597Mountable reflector white 80 mm Ø 08598

aReflectors


Saf

ety

and

sign

allin

g pa

rts672

Mountable reflectors round Hella 002 014

Mountable reflector. Plastic. Available in various colours.

Diameter : 60 mm ØMounting hole : 6 mm ØE-Approval : E1 01 21353 (8RA 002 014-031/041/051)

Description Art.no.Mountable reflector, orange 8RA 002 014-051Mountable reflector, red 8RA 002 014-031Mountable reflector, white 8RA 002 014-041Support, hard rubber 8HG 003 799-017

Screw reflectors, round Hella 002 016

Screw reflector Plastic. Available in various colours.

Diameter : 85 mm ØMounting bolt : M5E-Approval : E1 31290E-Approval : E1 21370

Description Art.no.Screw reflector, red 8RA 002 016-111

Mountable reflector round ULO 2898


Outer diameter : 61 mm ØMounting hole : 6 mm ØE-Approval : E1 0121383 R3 (ULO 2898)

Description Art.no.Reflector red ULO 2898-01Reflector orange ULO 2898-04Reflector white ULO 2898-03


Mountable reflector. Plastic, available in various colours.

Outer diameter : 78 mm ØMounting hole : 6 mm ØE-Approval : E1 0121304 R3 (ULO 3771)

Description Art.no.Reflector red ULO 3771-01


Mountable reflector. Plastic. Red.

Outer diameter : 120 mm ØMounting holes : 6 mm ØCentre-to-centre distance : 70 mmE-Approval : E1 0121369 R3 (ULO 4183)


Reflectors round, with mounting bolt ULO 2847/49/50

Reflector with mounting bolt, plastic, available in various colours.

Outer diameter : 62 mm ØMounting bolt : M5E-Approval : E1 0131233 R3

Description Art.no.Reflector red ULO 2847-01Reflector white ULO 2849-01

aReflectors


Saf

ety

and

sign

allin

g pa

rts

673

Reflectors round, with mounting bolt and plastic protective edge ULO 2851/3766

Reflector with mounting bolt and PVC protective edge. Available in various colours.

Mounting bolt : M5E-Approval : E1 0131233 R3 (ULO 2851)E-Approval : E1 0131247 R3 (ULO 3766)

Description Art.no.Reflector red 95 mm Ø ULO 3766-05Reflector orange 70 mm Ø ULO 2851-03

Adhesive reflectors rectangular

Adhesive reflector. Plastic, available in various colours and dimensions.E-Approval : E13 0486 - (08578)E-Approval : E13 0486 - (08579)E-Approval : E1 0231374 - (08580)E-Approval : E1 0231379 - (08581)E-Approval : E1 0231378 - (08582)E-Approval : E1 0231378 - (08583)E-Approval : E13 0487 - (08590)E-Approval : E1 0231375 - (08591)E-Approval : E1 0231375 - (08592)

Description Art.no.Adhesive reflector orange 56 x 39 mm 08581Adhesive reflector orange 94 x 44 mm 08578Adhesive reflector red 94 x 44 mm 08579Adhesive reflector white 94 x 44 mm 08580Adhesive reflector orange 105 x 55 mm 08590Adhesive reflector red 105 x 55 mm 08591Adhesive reflector white 105 x 55 mm 08592Adhesive reflector orange 122 x 33 mm 08582Adhesive reflector red 122 x 33 mm 08583

Adhesive reflectors rectangular Hella 003 326


Length : 94 mmWidth : 44 mmE-Approval : E2 02 92031 - (8RA 003 326-031/041/051)


Adhesive reflectors rectangular Hella 004 412


Length : 70 mmWidth : 32 mmE-Approval : E17 01 338 - (8RA 004 412-001/011/021)


Adhesive reflectors rectangular ULO 3414/16


Length : 44 mmWidth : 38 mmE-Approval : E1 0131304 (ULO 3414/16)


Adhesive reflectors rectangular ULO 3412/13

Adhesive reflector. Plastic. Suitable for horizontal and vertical mounting. Available in various colours.

Length : 62 mmWidth : 36 mmE-Approval : E1 0131296 R3 (ULO 3412/13)


aReflectors


Saf

ety

and

sign

allin

g pa

rts674

Adhesive reflectors rectangular ULO 4651

Adhesive reflector. Suitable for horizontal and vertical mounting. Plastic. Available in various colours.

Length : 94 mmWidth : 44 mmE-Approval : E2 01307 (ULO 4651)

Description Art.no.Reflector red ULO 4651-07Reflector orange ULO 4651-09Reflector white ULO 4651-08

Adhesive reflectors rectangular ULO 4742


Length : 122 mmWidth : 33 mmE-Approval : E1 0131236 R3 (ULO 4742)


Adhesive/mountable reflectors rectangular

Adhesive/mountable reflector. Plastic, available in various colours.

Length : 90 mmWidth : 40 mmCentre-to-centre distance : 70 mmMounting holes : 4 mm ØE-Approval : E13 0491 - (08575)E-Approval : E13 0491 - (08576)E-Approval : E13 0491 - (08577)

Description Art.no.Adhesive/mountable reflector orange 08575Adhesive/mountable reflector red 08576Adhesive/mountable reflector white 08577

Adhesive/mountable reflectors rectangular ULO 4755

Adhesive/mountable reflector. Plastic, available in various colours.

Length : 91 mmWidth : 61 mmCentre-to-centre distance : 79 mmMounting holes : 5 mm ØE-Approval : E1 0121344 R3 (ULO 4755)

Description Art.no.Reflector orange ULO 4755-05Reflector red ULO 4755-03

Mountable reflector rectangular

Mountable reflector, plastic.

Length : 103 mmWidth : 48 mmCentre-to-centre distance : 88 mmMounting holes : 5 mm ØE-Approval : E2 023388 - (06295)

Description Art.no.Mountable reflector orange 06295

Mountable reflector rectangular

Mountable reflector, plastic.

Length : 127 mmWidth : 51 mmCentre-to-centre distance : 114 mmMounting holes : 4 mm ØE-Approval : E2 0254099 - (00995)

Description Art.no.Mountable reflector orange 00995

aReflectors


Saf

ety

and

sign

allin

g pa

rts

675

Reflector rectangular Hella 002 023


Length : 180 mmWidth : 40 mmCentre-to-centre distance : 150 mmE-Approval : E17 02379

Description Art.no.Mountable reflector red 8RA 002 023-001

Mountable reflector rectangular Hella 003 326


Length : 94 mmWidth : 44 mmCentre-to-centre distance : 70 mmMounting holes : 4 mm ØE-Approval : E1 02 21395 - (8RA 003 326-001/011/021)

Description Art.no.Mountable reflector, orange 8RA 003 326-011Mountable reflector, red 8RA 003 326-001Mountable reflector, white 8RA 003 326-021


Mountable reflector. Plastic. Red. With black attachment plate. For mounting with "003 236" tail light series.

Description Art.no.Mountable reflector, red 8RA 003 660-007


Mountable reflector. Plastic. Red. With rubber back plate. For mounting with "003 734" lamp series.

Description Art.no.Mountable reflector, red 8RA 003 734-101

Mountable reflector rectangular ULO 4651

Mountable reflector. Suitable for horizontal and vertical mounting. Plastic. Available in red and orange.

Length : 94 mmWidth : 44 mmMounting holes : 4 mm ØCentre-to-centre distance : 70 mmE-Approval : E1 0121369 (ULO 4651)



Mountable reflector. Plastic, available in various colours.


Description Art.no.Reflector orange ULO 4755-04Mountable reflector red ULO 4755-01

aReflectors


Saf

ety

and

sign

allin

g pa

rts676


Mountable reflector, red. Plastic.





Length : 182 mmWidth : 41 mmMounting holes : 6 mm ØCentre-to-centre distance : 150 mmE-Approval : E1 0121359 R3 (ULO 5105)


Reflectors rectangular, with mounting bolt ULO 5088

Reflector with 1 or 2 mounting bolt(s). Plastic. Red.

Length : 131 mmWidth : 42 mmMounting bolts : M6Centre-to-centre distance : 40 mmE-Approval : E1 0111376 R3 (ULO 5088)

Description Art.no.Reflector red, 2 mounting bolts ULO 5088-01Reflector red, 1 mounting bolt ULO 5088-02

Triangle reflector

Triangle reflector red, plastic.

Centre-to-centre distance : 70 mmMounting holes : 5 mm ØE-Approval : E13 0488 R3 - (06110)

Description Art.no.Triangle reflector red 06110

Triangle reflector Hella 002 020

Triangle reflector red. Plastic.

Centre-to-centre distance : 70 mm ØMounting holes : 6 mm ØE-Approval : E17 01 346 - (8RA 002 020-001)

Description Art.no.Triangle reflector red 8RA 002 020-001

Triangle reflector Hella 003 503

Triangle reflector with 4 separate reflectors. Plastic housing.

Length : 181 mmHeight : 160 mmCentre-to-centre distance : 70 mmBolts : M5E-Approval : K 13487 - (8RA 003 503-001)

Description Art.no.Triangle reflector red 8RA 003 503-001

aReflectors

Deel_1_.mif Page 676 Monday, July 14, 2014 11:37 AM

Saf

ety

and

sign

allin

g pa

rts

677

Triangle reflector ULO 3428

Triangle reflector, metal base plate with 4 separate reflectors in rubber frame.

Length : 166 mmHeight : 145 mmCentre-to-centre distance : 70 mmBolts : M5E-Approval : E1 0113485 R3 (ULO 3428)

Description Art.no.Triangle reflector red ULO 3428-01

Triangle reflector ULO 3464

Triangle reflector, red plastic.

Centre-to-centre distance : 70 mmMounting holes : 5 mm ØE-Approval : E1 0113481 R3 (ULO 3464)


Triangle reflector, with mounting bolts ULO 3464

Triangle reflector, red plastic.

Centre-to-centre distance : 70 mmMounting bolts : M5E-Approval : E1 0113481 R3 (ULO 3464)


aReflectors


Saf

ety

and

sign

allin

g pa

rts678

*Measuring instrumentsMeasuring instrumentsAlcohol tester

Alcohol tester

Alcohol tester

Display, includes 40 alcohol breath testers, packed in silver flow packaging.

Description Art.no.Display, 40 pieces IT 0809A 00001

aAlcohol tester


Date post:	15-Feb-2021
Category:	Documents
Upload:	others
View:	2 times
Download:	0 times

Fire extinguisher 631 Fire extinguisher boxes 632 Horns & Buzzer...

Documents