Date post: | 27-Dec-2015 |
Category: |
Documents |
Upload: | lorraine-lindsey |
View: | 214 times |
Download: | 0 times |
FIREWALLS & NETWORK SECURITY with Intrusion Detection and VPNs, 2nd ed.
4Finding Network Vulnerabilities
By Whitman, Mattord, & Austin © 2008 Course Technology
Learning Objectives
Name the common categories of vulnerabilities Discuss common system and network
vulnerabilities Locate and access sources of information about
emerging vulnerabilities Identify the names and functions of the widely
available scanning and analysis tools
Firewalls & Network Security, 2nd ed. - Chapter 4 Slide 2
Introduction
To maintain secure networks, information security professionals must be prepared to identify system vulnerabilities, whether by hiring system assessment experts or by conducting self-assessments using scanning and penetration tools
Network security vulnerability is defect in product, process, or procedure that, if exploited, may result in violation of security policy, which in turn might lead to loss of revenue, loss of information, or loss of value to the organization
Firewalls & Network Security, 2nd ed. - Chapter 4 Slide 3
Common Vulnerabilities
Common vulnerabilities fall into two broad classes:
Defects in software or firmware Weaknesses in processes and procedures
Firewalls & Network Security, 2nd ed. - Chapter 4 Slide 4
Defects in Software or Firmware
Buffer overruns (or buffer overflows) arise when quantity of input data exceeds size of available data area (buffer)
Injection attacks can occur when programmer does not properly validate user input and allows an attacker to include input that, when passed to a database, can give rise to SQL injection vulnerabilities
Network traffic is vulnerable to eavesdropping because a network medium is essentially an open channel
Firewalls & Network Security, 2nd ed. - Chapter 4 Slide 5
Defects in Software or Firmware (continued)
How can security professionals remain abreast of all the vulnerabilities?
First and perhaps foremost, they must know:– Organization’s security policies– Software and hardware the organization uses
Information security professionals should regularly consult these public disclosure lists:– Vendor announcements – Full disclosure mailing lists – CVE: the common vulnerabilities and exposures
databaseFirewalls & Network Security, 2nd ed. - Chapter 4 Slide 6
Vendor Announcements
Firewalls & Network Security, 2nd ed. - Chapter 4 Slide 7
BugTraq
Firewalls & Network Security, 2nd ed. - Chapter 4 Slide 8
Weaknesses in Processes and Procedures
Just as hazardous as software vulnerabilities More difficult to detect and fix because they
typically involve the human element Often arise when policy is violated or processes
and procedures that implement policy are inadequate or fail
To ensure security policy is implemented, organizations should hold regular security awareness training and regularly review policies and their implementation
Firewalls & Network Security, 2nd ed. - Chapter 4 Slide 9
Scanning and Analysis Tools
To truly assess risk within computing environment, technical controls must be deployed using strategy of defense in depth
Scanners and analysis tools can find vulnerabilities in systems, holes in security components, and unsecured aspects of the network
Scanners, sniffers, and other such vulnerability analysis tools are invaluable because they enable administrators to see what attackers see
Firewalls & Network Security, 2nd ed. - Chapter 4 Slide 10
Scanning and Analysis Tools (continued) Scanning tools are typically used as part of an
attack protocol Attack protocol is a series of steps or processes
used by attacker, in logical sequence, to launch attack against target system or network
This may begin with a collection of publicly available information about a potential target, a process known as footprinting
Attacker uses public Internet data sources to perform searches to identify network addresses of the organization
Firewalls & Network Security, 2nd ed. - Chapter 4 Slide 11
Footprinting
Most important information for footprinting purposes is IP address range
Another piece of useful information is name, phone number, and e-mail address of the technical contact
This research is augmented by browsing the organization’s Web pages since Web pages usually contain information about internal systems, individuals developing Web pages, and other tidbits, which can be used for social engineering attacks
Firewalls & Network Security, 2nd ed. - Chapter 4 Slide 12
Footprinting (continued)
To assist in footprint intelligence collection process, an enhanced Web scanner can be used that, among other things, can scan entire Web sites for valuable pieces of information, such as server names and e-mail addresses
Firewalls & Network Security, 2nd ed. - Chapter 4 Slide 13
Sam Spade
Firewalls & Network Security, 2nd ed. - Chapter 4 Slide 14
Fingerprinting
Next phase of attack protocol is data-gathering process called fingerprinting, a systematic survey of all of the target organization’s Internet addresses that is conducted to identify network services offered by hosts in that range
Fingerprinting reveals useful information about internal structure and operational nature of the target system or network
Firewalls & Network Security, 2nd ed. - Chapter 4 Slide 15
Port Scanners
Port scanning utilities (port scanners) are tools used by both attackers and defenders to identify computers that are active on a network, as well as ports and services active on those computers, functions and roles the machines are fulfilling, and other useful information
The more specific the scanner is, the better and more useful the information it provides is, but a generic, broad-based scanner can help locate and identify rogue nodes on the network
Firewalls & Network Security, 2nd ed. - Chapter 4 Slide 16
Port Scanners (continued)
Port is a network channel or connection point in a data communications system
Within TCP/IP, TCP and UDP port numbers differentiate multiple communication channels used to connect to network services being offered on same device
In all, there are 65,536 port numbers in use for TCP and another 65,536 port numbers for UDP
Ports greater than 1023 typically referred to as ephemeral ports and may be randomly allocated to server and client processes
Firewalls & Network Security, 2nd ed. - Chapter 4 Slide 17
Port Scanners (continued)
Why secure open ports? Open port is an open door and can be used by
attacker to send commands to a computer, potentially gain access to a server, and possibly exert control over a networking device
The general policy statement is to remove from service or secure any port not absolutely necessary to conducting business
Firewalls & Network Security, 2nd ed. - Chapter 4 Slide 18
Firewall Analysis Tools
Understanding exactly where organization’s firewall is located and what existing rule sets do are very important steps for any security administrator
Several tools that automate remote discovery of firewall rules and assist administrator (or attacker) in analyzing rules to determine exactly what they allow and what they reject
Firewalls & Network Security, 2nd ed. - Chapter 4 Slide 19
Firewall Analysis Tools (continued)
Administrators wary of using same tools attackers use should remember:– Regardless of the nature of the tool used to
validate or analyze firewall’s configuration, it is the intent of the user that dictates how information gathered will be used
– To defend a computer or network, it is necessary to understand ways it can be attacked; thus, a tool that can help close up an open or poorly configured firewall helps network defender minimize risk from attack
Firewalls & Network Security, 2nd ed. - Chapter 4 Slide 20
Operating System Detection Tools
Identifying target computer’s operating system is very valuable to attacker
Once the operating system is known, it is easy to determine all vulnerabilities to which it might be susceptible
Firewalls & Network Security, 2nd ed. - Chapter 4 Slide 21
Vulnerability Scanners
Passive vulnerability scanner listens in on the network and identifies vulnerable versions of both server and client software
Active vulnerability scanners scan networks for highly detailed information by initiating network traffic in order to identify security holes– These scanners identify exposed usernames and
groups, show open network shares, and expose configuration problems and other vulnerabilities in servers
Firewalls & Network Security, 2nd ed. - Chapter 4 Slide 22
Vulnerability Scanners (continued)
Firewalls & Network Security, 2nd ed. - Chapter 4 Slide 23
Vulnerability Validation
Often, an organization requires proof that system is actually vulnerable to certain attacks
May require such proof to avoid having system administrators attempt to repair systems that are not broken or because they have not yet built satisfactory relationship with vulnerability assessment team
Class of scanners exists that exploit remote machine and allow vulnerability analyst (penetration tester) to create accounts, modify Web pages, or view data
Firewalls & Network Security, 2nd ed. - Chapter 4 Slide 24
Vulnerability Validation (continued)
Firewalls & Network Security, 2nd ed. - Chapter 4 Slide 25
Packet Sniffers
Network tool that collects copies of packets from network and analyzes them
Sometimes called a network protocol analyzer Can provide network administrator with valuable
information for diagnosing and resolving networking issues
In the wrong hands, sniffer can be used to eavesdrop on network traffic
Firewalls & Network Security, 2nd ed. - Chapter 4 Slide 26
Packet Sniffers (continued)
Firewalls & Network Security, 2nd ed. - Chapter 4 Slide 27
Wireless Security Tools
Wireless connection, while convenient, has many potential security holes
Security professional must assess risk of wireless networks
Wireless security toolkit should include ability to sniff wireless traffic, scan wireless hosts, and assess level of privacy or confidentiality afforded on wireless network
Firewalls & Network Security, 2nd ed. - Chapter 4 Slide 28
Wireless Security Tools (continued)
Firewalls & Network Security, 2nd ed. - Chapter 4 Slide 29
Penetration Testing
Penetration test involves using all techniques and tools available to attacker in order to attempt to compromise or penetrate an organization’s defenses
Penetration testing can be performed by internal group (so called “red teams”) or outsourced to external organization
A variable of the penetration test, whether performed internally or outsourced, is amount of information provided to the red team
Firewalls & Network Security, 2nd ed. - Chapter 4 Slide 30
Penetration Testing (continued)
Three categories of testing:– Black box: red team is given no information
whatsoever about the organization and approaches the organization as external attacker
– Gray box: red team is given some general information about the organization such as general structure, network address ranges, software and versions
– White box: red team has full information on the organization and its structure
Firewalls & Network Security, 2nd ed. - Chapter 4 Slide 31
Chapter Summary
To maintain secure networks, information security professionals must be prepared to systematically identify system vulnerabilities
Often done by performing self-assessment using scanning and penetration tools testing
Common vulnerabilities fall into two classes:– Defects in software or firmware
– Weaknesses in processes and procedures
Firewalls & Network Security, 2nd ed. - Chapter 4 Slide 32
Chapter Summary (continued)
Information security professionals should regularly consult vendor announcements, full disclosure mailing lists, and the common vulnerabilities and exposures (CVE) database
To assess risk within a computing environment, network professionals must use tools such as intrusion detection systems (IDPS), active vulnerability scanners, passive vulnerability scanners, automated log analyzers, and protocol analyzers (sniffers)
Firewalls & Network Security, 2nd ed. - Chapter 4 Slide 33
Chapter Summary (continued)
Many organizations use penetration test to assess their security posture on a regular basis
Penetration test team (red team) uses all techniques and tools available to attackers in order to attempt to compromise or penetrate an organization’s defenses
Firewalls & Network Security, 2nd ed. - Chapter 4 Slide 34