DWG

DRAWN MATERIAL :

CHK

APPD

AUTH

A3

SPEC :

FINISH :

1

A

2 3 4

B

C

D

A

B

C

D

1 2 3 4

SHEET SHEETS

ORIGINAL DATE

:2016-04-26

FROM CHINA AREA Rev.2016-04-26

ACCORDING WITH OTIS DOCUMENT 52847 & DRAWING MANUAL ENG_H_S002 OTIS 52847 ENG_H_S002

Changes

ALL DIMENSIONS METRIC

STANDARD

1160

1160×NUU756/30�$� LTV LTV 1478/30�$�

15

1160900

15 15 15

997

250 250

481.4 916.5

(DATE) Change Description Auth. Engineer

2017-1-3 , , 2,3,5,6 CAT21767

/Remark:1 1 2 J-J ./Detail ,section J-J see sheet 5.

:/ Technical requirements:1 /Drawings in this sheet are used for truss incline section while only one section.2 XAA268BW /Welding according to file XAA268BW about truss welding.3 , /If welding tube,welding line must be inside of truss.4 /Bending side shall not curly after backplane assembly. 5 /The tread marks on the truss floor.

W.P W.P

HAA135AA_

HAA135AB_ HAA135AR1

HAA135AY_HAA135AD1

HAA135AS999 HAA135AA_ HAA135AB_

HAA135AX-

B-B

HAA347BP

HAA347BP A-A

HAA104M1 HAA104M1

O.2 O.5 1O.1 O.2 O.3 O.5 O.8 1.2 2

O-1O

1�$� O.5�$� O.3�$� O.15�$� O.1�$�

>6-3O >3O-12O >12O-4OO >4OO-1OOO >1OOO-2OOO >3-6 >6 >1O-5O >5O-12O >12O-4OO>2OOO-4OOO >4OOO.5-6LENGTH/DIAMETER /

ISO 2768-1 ISO 2768-1 MEDIUM

O.5-3RADIUS/CHAMFER /

FIRST ANGLE

OTIS ENGINEERING HANGZHOU

WELDS

TOLERANCE

TOLERANCE

ANGLE (shorter side length) ( )

TOLERANCE

THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.

WARNING

C

UNPUBLISHED WORK OTIS ELEVATOR COMPANY

C

THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.

WARNING

C

UNPUBLISHED WORK OTIS ELEVATOR COMPANY

C

HE0103A

2016-4-21

- TRUSS-INCLINE SECTION I

THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.

WARNING

C

UNPUBLISHED WORK OTIS ELEVATOR COMPANY

C

z = LEG LENGTH

WELDING SYMBOLS AREUSED ON THIS DRAWING.

z =

WELDS z = LEG LENGTH

ANSI/AWS A2.4-98WELDING SYMBOLS ARE

USED ON THIS DRAWING.z =

ANSI/AWS A2.4-98

WELDS z = LEG LENGTHISO 2553-1992

WELDING SYMBOLS AREUSED ON THIS DRAWING.

z =

ISO 2553-1992

111

zzz

z

z

1

1

DWG

DRAWN MATERIAL :

CHK

APPD

AUTH

A3

SPEC :

FINISH :

1

A

2 3 4

B

C

D

A

B

C

D

1 2 3 4

SHEET SHEETS

ORIGINAL DATE

:2016-04-26

FROM CHINA AREA Rev.2016-04-26

ACCORDING WITH OTIS DOCUMENT 52847 & DRAWING MANUAL ENG_H_S002 OTIS 52847 ENG_H_S002

Changes

ALL DIMENSIONS METRIC

STANDARD

1160

1160×NUL 600 630

400590

15

15

855 200

15

9001160

250

/30�$�756

481.4

(DATE) Change Description Auth. Engineer

2017-1-3 , CAT21767

/Remark:1 1 2 J-J ./Detail ,section J-J see sheet 5.

:/ Technical requirements:1 /Drawings in this sheet are used for truss incline section while only one section.2 XAA268BW /Welding according to file XAA268BW about truss welding.3 , /If welding tube,welding line must be inside of truss.4 , HAA26E /If with intermediate support,reinforce truss see HAA26E.5 /Bending side shall not curly after backplane assembly. 6 /The tread marks on the truss floor.

C-C

HAA135AB_

HAA135AA_

HAA135AR1

HAA135AD1

HAA135AN-

HAA135AR2

HAA135AR3

HAA310E1

HAA135AT_

D-D

W.P

J

J

HAA347BP- HAA347BP-HAA347BP- HAA347BP-

HAA104M1

Q-Q

O.2 O.5 1O.1 O.2 O.3 O.5 O.8 1.2 2

O-1O

1�$� O.5�$� O.3�$� O.15�$� O.1�$�

>6-3O >3O-12O >12O-4OO >4OO-1OOO >1OOO-2OOO >3-6 >6 >1O-5O >5O-12O >12O-4OO>2OOO-4OOO >4OOO.5-6LENGTH/DIAMETER /

ISO 2768-1 ISO 2768-1 MEDIUM

O.5-3RADIUS/CHAMFER /

FIRST ANGLE

OTIS ENGINEERING HANGZHOU

WELDS

TOLERANCE

TOLERANCE

ANGLE (shorter side length) ( )

TOLERANCE

THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.

WARNING

C

UNPUBLISHED WORK OTIS ELEVATOR COMPANY

C

THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.

WARNING

C

UNPUBLISHED WORK OTIS ELEVATOR COMPANY

C

HE0103A

2016-04-30

- TRUSS-INCLINE SECTION

CAT20449

THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.

WARNING

C

UNPUBLISHED WORK OTIS ELEVATOR COMPANY

C

z = LEG LENGTH

WELDING SYMBOLS AREUSED ON THIS DRAWING.

z =

WELDS z = LEG LENGTH

ANSI/AWS A2.4-98WELDING SYMBOLS ARE

USED ON THIS DRAWING.z =

ANSI/AWS A2.4-98

WELDS z = LEG LENGTHISO 2553-1992

WELDING SYMBOLS AREUSED ON THIS DRAWING.

z =

ISO 2553-1992

2

zzz

z

z

1

1

5

DWG

DRAWN MATERIAL :

CHK

APPD

AUTH

A3

SPEC :

FINISH :

1

A

2 3 4

B

C

D

A

B

C

D

1 2 3 4

SHEET SHEETS

ORIGINAL DATE

:2016-04-26

FROM CHINA AREA Rev.2016-04-26

ACCORDING WITH OTIS DOCUMENT 52847 & DRAWING MANUAL ENG_H_S002 OTIS 52847 ENG_H_S002

Changes

ALL DIMENSIONS METRIC

STANDARD

570530400

15

520 1160×NUU LTV LTV 1478/30�$�

200 765

15

15

15

15

15

997

250

916.5

(DATE) Change Description Auth. Engineer

2017-1-3 CAT21767

/Remark:1 1 2 J-J ./Detail ,section J-J see sheet 5.

:/ Technical requirements:1 /Drawings in this sheet are used for truss incline section while only one section.2 XAA268BW /Welding according to file XAA268BW about truss welding.3 , /If welding tube,welding line must be inside of truss.4 , HAA26E /If with intermediate support,reinforce truss see HAA26E.5 /Bending side shall not curly after backplane assembly. 6 /The tread marks on the truss floor.

HAA135AB-HAA135AA-

W.P

HAA135AS999HAA135AT-HAA135AD1

HAA135AR1

HAA135AR4

HAA135AR3

HAA135AN_

HAA310E1

F-F

J

J

HAA347BP_ HAA347BP_ HAA347BP_

E-E

HAA104M1

O.2 O.5 1O.1 O.2 O.3 O.5 O.8 1.2 2

O-1O

1�$� O.5�$� O.3�$� O.15�$� O.1�$�

>6-3O >3O-12O >12O-4OO >4OO-1OOO >1OOO-2OOO >3-6 >6 >1O-5O >5O-12O >12O-4OO>2OOO-4OOO >4OOO.5-6LENGTH/DIAMETER /

ISO 2768-1 ISO 2768-1 MEDIUM

O.5-3RADIUS/CHAMFER /

FIRST ANGLE

OTIS ENGINEERING HANGZHOU

WELDS

TOLERANCE

TOLERANCE

ANGLE (shorter side length) ( )

TOLERANCE

THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.

WARNING

C

UNPUBLISHED WORK OTIS ELEVATOR COMPANY

C

THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.

WARNING

C

UNPUBLISHED WORK OTIS ELEVATOR COMPANY

C

HE0103A

2016-04-30

- TRUSS-INCLINE SECTION

CAT20449

THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.

WARNING

C

UNPUBLISHED WORK OTIS ELEVATOR COMPANY

C

z = LEG LENGTH

WELDING SYMBOLS AREUSED ON THIS DRAWING.

z =

WELDS z = LEG LENGTH

ANSI/AWS A2.4-98WELDING SYMBOLS ARE

USED ON THIS DRAWING.z =

ANSI/AWS A2.4-98

WELDS z = LEG LENGTHISO 2553-1992

WELDING SYMBOLS AREUSED ON THIS DRAWING.

z =

ISO 2553-1992

3

zzz

z

z

5

DWG

DRAWN MATERIAL :

CHK

APPD

AUTH

A3

SPEC :

FINISH :

1

A

2 3 4

B

C

D

A

B

C

D

1 2 3 4

SHEET SHEETS

ORIGINAL DATE

:2016-04-26

FROM CHINA AREA Rev.2016-04-26

ACCORDING WITH OTIS DOCUMENT 52847 & DRAWING MANUAL ENG_H_S002 OTIS 52847 ENG_H_S002

Changes

ALL DIMENSIONS METRIC

STANDARD

G G

570

530

400

200

520 1160×NUL 600590

765 855 200

15151515

1160

15

15

15 15

630

15

400

/Remark:1 1 2 J-J ./Detail ,section J-J see sheet 5.

:/ Technical requirements:1 /Drawings in this sheet are used for truss incline section while only one section.2 XAA268BW /Welding according to file XAA268BW about truss welding.3 , /If welding tube,welding line must be inside of truss.4 /Bending side shall not curly after backplane assembly. 5 /The tread marks on the truss floor.

H-H

HAA310E1

HAA135AR3

HAA135AR4

HAA135AN_

HAA135AD1HAA135AT-

HAA135AR1

HAA135AR2HAA135AR3

HAA310E1

J

J

G-G

HAA347BP_ HAA347BP_

O.2 O.5 1O.1 O.2 O.3 O.5 O.8 1.2 2

O-1O

1�$� O.5�$� O.3�$� O.15�$� O.1�$�

>6-3O >3O-12O >12O-4OO >4OO-1OOO >1OOO-2OOO >3-6 >6 >1O-5O >5O-12O >12O-4OO>2OOO-4OOO >4OOO.5-6LENGTH/DIAMETER /

ISO 2768-1 ISO 2768-1 MEDIUM

O.5-3RADIUS/CHAMFER /

FIRST ANGLE

OTIS ENGINEERING HANGZHOU

WELDS

TOLERANCE

TOLERANCE

ANGLE (shorter side length) ( )

TOLERANCE

THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.

WARNING

C

UNPUBLISHED WORK OTIS ELEVATOR COMPANY

C

THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.

WARNING

C

UNPUBLISHED WORK OTIS ELEVATOR COMPANY

C

HE0103A

2016-04-30

- TRUSS-INCLINE SECTION

CAT20449

THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.

WARNING

C

UNPUBLISHED WORK OTIS ELEVATOR COMPANY

C

z = LEG LENGTH

WELDING SYMBOLS AREUSED ON THIS DRAWING.

z =

WELDS z = LEG LENGTH

ANSI/AWS A2.4-98WELDING SYMBOLS ARE

USED ON THIS DRAWING.z =

ANSI/AWS A2.4-98

WELDS z = LEG LENGTHISO 2553-1992

WELDING SYMBOLS AREUSED ON THIS DRAWING.

z =

ISO 2553-1992

4

zzz

z

z

5 5

DWG

DRAWN MATERIAL :

CHK

APPD

AUTH

A3

SPEC :

FINISH :

1

A

2 3 4

B

C

D

A

B

C

D

1 2 3 4

SHEET SHEETS

ORIGINAL DATE

:2016-04-26

FROM CHINA AREA Rev.2016-04-26

ACCORDING WITH OTIS DOCUMENT 52847 & DRAWING MANUAL ENG_H_S002 OTIS 52847 ENG_H_S002

Changes

ALL DIMENSIONS METRIC

STANDARD

400

WW

(DATE) Change Description Auth. Engineer

2017-1-3 Q-Q CAT21767

J-JL-L

Q-Q

HAA272X_

HAA272XHAA272X

5 2404 150

O.2 O.5 1O.1 O.2 O.3 O.5 O.8 1.2 2

O-1O

1�$� O.5�$� O.3�$� O.15�$� O.1�$�

>6-3O >3O-12O >12O-4OO >4OO-1OOO >1OOO-2OOO >3-6 >6 >1O-5O >5O-12O >12O-4OO>2OOO-4OOO >4OOO.5-6LENGTH/DIAMETER /

ISO 2768-1 ISO 2768-1 MEDIUM

O.5-3RADIUS/CHAMFER /

FIRST ANGLE

OTIS ENGINEERING HANGZHOU

WELDS

TOLERANCE

TOLERANCE

ANGLE (shorter side length) ( )

TOLERANCE

THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.

WARNING

C

UNPUBLISHED WORK OTIS ELEVATOR COMPANY

C

THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.

WARNING

C

UNPUBLISHED WORK OTIS ELEVATOR COMPANY

C

HE0103A

2016-04-30

- TRUSS-INCLINE SECTION

CAT20449

THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.

WARNING

C

UNPUBLISHED WORK OTIS ELEVATOR COMPANY

C

z = LEG LENGTH

WELDING SYMBOLS AREUSED ON THIS DRAWING.

z =

WELDS z = LEG LENGTH

ANSI/AWS A2.4-98WELDING SYMBOLS ARE

USED ON THIS DRAWING.z =

ANSI/AWS A2.4-98

WELDS z = LEG LENGTHISO 2553-1992

WELDING SYMBOLS AREUSED ON THIS DRAWING.

z =

ISO 2553-1992

5

zzz

z

z

1

1

4 1505 240

4 127 4 127

DWG

DRAWN MATERIAL :

CHK

APPD

AUTH

A3

SPEC :

FINISH :

1

A

2 3 4

B

C

D

A

B

C

D

1 2 3 4

SHEET SHEETS

ORIGINAL DATE

:2016-04-26

FROM CHINA AREA Rev.2016-04-26

ACCORDING WITH OTIS DOCUMENT 52847 & DRAWING MANUAL ENG_H_S002 OTIS 52847 ENG_H_S002

Changes

ALL DIMENSIONS METRIC

STANDARD

1067

( 1000)

1500

410

445.8

15

25

(DATE) Change Description Auth. Engineer

2017-1-3 CAT21767

:1. , ;2. , .

HAA65L2 1 , 1 ,

B-B

HAA316JM

A-A

1094( 600)

1297( 800)

C-C

O.2 O.5 1O.1 O.2 O.3 O.5 O.8 1.2 2

O-1O

1�$� O.5�$� O.3�$� O.15�$� O.1�$�

>6-3O >3O-12O >12O-4OO >4OO-1OOO >1OOO-2OOO >3-6 >6 >1O-5O >5O-12O >12O-4OO>2OOO-4OOO >4OOO.5-6LENGTH/DIAMETER /

ISO 2768-1 ISO 2768-1 MEDIUM

O.5-3RADIUS/CHAMFER /

FIRST ANGLE

OTIS ENGINEERING HANGZHOU

WELDS

TOLERANCE

TOLERANCE

ANGLE (shorter side length) ( )

TOLERANCE

THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.

WARNING

C

UNPUBLISHED WORK OTIS ELEVATOR COMPANY

C

THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.

WARNING

C

UNPUBLISHED WORK OTIS ELEVATOR COMPANY

C

HE0103A

2016-04-30

CAT20449

THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.

WARNING

C

UNPUBLISHED WORK OTIS ELEVATOR COMPANY

C

z = LEG LENGTH

WELDING SYMBOLS AREUSED ON THIS DRAWING.

z =

WELDS z = LEG LENGTH

ANSI/AWS A2.4-98WELDING SYMBOLS ARE

USED ON THIS DRAWING.z =

ANSI/AWS A2.4-98

WELDS z = LEG LENGTHISO 2553-1992

WELDING SYMBOLS AREUSED ON THIS DRAWING.

z =

ISO 2553-1992

6

zzz

z

z

1

1

1

5 5

5 5

5 5

55

DWG

DRAWN MATERIAL :

CHK

APPD

AUTH

A3

SPEC :

FINISH :

1

A

2 3 4

B

C

D

A

B

C

D

1 2 3 4

SHEET SHEETS

ORIGINAL DATE

:2016-04-26

FROM CHINA AREA Rev.2016-04-26

ACCORDING WITH OTIS DOCUMENT 52847 & DRAWING MANUAL ENG_H_S002 OTIS 52847 ENG_H_S002

Changes

ALL DIMENSIONS METRIC

STANDARD

BL

4065

BL

65

50

:1. BL ODS HE0103A/B VALUE OF BL REFER TO HE0103A/B;2. B,A 9 DETAIL B, VIEW A SEE SHEET 3.

HAA135AQ1 HAA135AR6 HAA135AR5 HAA135AQ2

B

A

HAA135AR6 HAA135AQ1

B

A

HAA135AQ3

HAA135AR7

O.2 O.5 1O.1 O.2 O.3 O.5 O.8 1.2 2

O-1O

1�$� O.5�$� O.3�$� O.15�$� O.1�$�

>6-3O >3O-12O >12O-4OO >4OO-1OOO >1OOO-2OOO >3-6 >6 >1O-5O >5O-12O >12O-4OO>2OOO-4OOO >4OOO.5-6LENGTH/DIAMETER /

ISO 2768-1 ISO 2768-1 MEDIUM

O.5-3RADIUS/CHAMFER /

FIRST ANGLE

OTIS ENGINEERING HANGZHOU

WELDS

TOLERANCE

TOLERANCE

ANGLE (shorter side length) ( )

TOLERANCE

THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.

WARNING

C

UNPUBLISHED WORK OTIS ELEVATOR COMPANY

C

THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.

WARNING

C

UNPUBLISHED WORK OTIS ELEVATOR COMPANY

C

HE0103A

2016-04-30

ARRANGMENT OF INTER. SUPPORT

CAT20449

THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.

WARNING

C

UNPUBLISHED WORK OTIS ELEVATOR COMPANY

C

z = LEG LENGTH

WELDING SYMBOLS AREUSED ON THIS DRAWING.

z =

WELDS z = LEG LENGTH

ANSI/AWS A2.4-98WELDING SYMBOLS ARE

USED ON THIS DRAWING.z =

ANSI/AWS A2.4-98

WELDS z = LEG LENGTHISO 2553-1992

WELDING SYMBOLS AREUSED ON THIS DRAWING.

z =

ISO 2553-1992

7

zzz

z

z

8 , 4 260

4 210

4 998

4 997

4 538

4 538

4 170

4 998

4 9984 458

4 458

4 210

4 165

4 8 ,

260

B

DWG

DRAWN MATERIAL :

CHK

APPD

AUTH

A3

SPEC :

FINISH :

1

A

2 3 4

B

C

D

A

B

C

D

1 2 3 4

SHEET SHEETS

ORIGINAL DATE

:2016-04-26

FROM CHINA AREA Rev.2016-04-26

ACCORDING WITH OTIS DOCUMENT 52847 & DRAWING MANUAL ENG_H_S002 OTIS 52847 ENG_H_S002

Changes

ALL DIMENSIONS METRIC

STANDARD

BL

EL

BL

EL

65

65

15 15

6565

1515

:1. BL ODS HE0103A/B VALUE OF BL REFER TO HE0103A/B;2. B,A 9 DETAIL B, VIEW A SEE SHEET 3.

HAA135AQ1 HAA135AR6

A

B

HAA135AQ1 HAA135AR6

A

B

O.2 O.5 1O.1 O.2 O.3 O.5 O.8 1.2 2

O-1O

1�$� O.5�$� O.3�$� O.15�$� O.1�$�

>6-3O >3O-12O >12O-4OO >4OO-1OOO >1OOO-2OOO >3-6 >6 >1O-5O >5O-12O >12O-4OO>2OOO-4OOO >4OOO.5-6LENGTH/DIAMETER /

ISO 2768-1 ISO 2768-1 MEDIUM

O.5-3RADIUS/CHAMFER /

FIRST ANGLE

OTIS ENGINEERING HANGZHOU

WELDS

TOLERANCE

TOLERANCE

ANGLE (shorter side length) ( )

TOLERANCE

THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.

WARNING

C

UNPUBLISHED WORK OTIS ELEVATOR COMPANY

C

THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.

WARNING

C

UNPUBLISHED WORK OTIS ELEVATOR COMPANY

C

HE0103A

2016-04-30

ARRANGMENT OF INTER. SUPPORT

CAT20449

THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.

WARNING

C

UNPUBLISHED WORK OTIS ELEVATOR COMPANY

C

z = LEG LENGTH

WELDING SYMBOLS AREUSED ON THIS DRAWING.

z =

WELDS z = LEG LENGTH

ANSI/AWS A2.4-98WELDING SYMBOLS ARE

USED ON THIS DRAWING.z =

ANSI/AWS A2.4-98

WELDS z = LEG LENGTHISO 2553-1992

WELDING SYMBOLS AREUSED ON THIS DRAWING.

z =

ISO 2553-1992

8

zzz

z

z

8 , 4 260 4 210 4 998

4 997

4 998

4 997

4 210

8 , 4 260

4 210

4 998

4 997

4 998

4 997

4 210

DWG

DRAWN MATERIAL :

CHK

APPD

AUTH

A3

SPEC :

FINISH :

1

A

2 3 4

B

C

D

A

B

C

D

1 2 3 4

SHEET SHEETS

ORIGINAL DATE

:2016-04-26

FROM CHINA AREA Rev.2016-04-26

ACCORDING WITH OTIS DOCUMENT 52847 & DRAWING MANUAL ENG_H_S002 OTIS 52847 ENG_H_S002

Changes

ALL DIMENSIONS METRIC

STANDARD

CC

20 210

2×M12

HAA386FH1

B

1mm

C ( )DISASSEMBLE INTERMEDIATE SUPPORT

A

position of intermediate support

4 270

4 270

O.2 O.5 1O.1 O.2 O.3 O.5 O.8 1.2 2

O-1O

1�$� O.5�$� O.3�$� O.15�$� O.1�$�

>6-3O >3O-12O >12O-4OO >4OO-1OOO >1OOO-2OOO >3-6 >6 >1O-5O >5O-12O >12O-4OO>2OOO-4OOO >4OOO.5-6LENGTH/DIAMETER /

ISO 2768-1 ISO 2768-1 MEDIUM

O.5-3RADIUS/CHAMFER /

FIRST ANGLE

OTIS ENGINEERING HANGZHOU

WELDS

TOLERANCE

TOLERANCE

ANGLE (shorter side length) ( )

TOLERANCE

THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.

WARNING

C

UNPUBLISHED WORK OTIS ELEVATOR COMPANY

C

THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.

WARNING

C

UNPUBLISHED WORK OTIS ELEVATOR COMPANY

C

HE0103A

2016-04-30

ARRANGMENT OF INTER. SUPPORT

CAT20449

THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.

WARNING

C

UNPUBLISHED WORK OTIS ELEVATOR COMPANY

C

z = LEG LENGTH

WELDING SYMBOLS AREUSED ON THIS DRAWING.

z =

WELDS z = LEG LENGTH

ANSI/AWS A2.4-98WELDING SYMBOLS ARE

USED ON THIS DRAWING.z =

ANSI/AWS A2.4-98

WELDS z = LEG LENGTHISO 2553-1992

WELDING SYMBOLS AREUSED ON THIS DRAWING.

z =

ISO 2553-1992

9

zzz

z

z

5 60

5 60

DWG

DRAWN MATERIAL :

CHK

APPD

AUTH

A3

SPEC :

FINISH :

1

A

2 3 4

B

C

D

A

B

C

D

1 2 3 4

SHEET SHEETS

ORIGINAL DATE

:2016-04-26

FROM CHINA AREA Rev.2016-04-26

ACCORDING WITH OTIS DOCUMENT 52847 & DRAWING MANUAL ENG_H_S002 OTIS 52847 ENG_H_S002

Changes

ALL DIMENSIONS METRIC

STANDARD

EL

795

835+EL 200

200

1740-EL

15

795

EL415

(835+EL)/2+25

835+EL 200

200

1740-EL

(1740-EL)/2+25

415

EL

835+EL 200

200

(1740-EL)/2+25

1740-EL

BL BL

BL BL

EL

795

440+EL 200

(440+EL)/2+25

200

2045-EL

(835+EL)/2+25

BTPA:ARRA/ARRGA-A

795 EL<1160

HAA347BP__ HAA347BP__

BTPA:ARRA/ARRGA-A

415<EL<795

HAA347BP__ HAA347BP__

BTPA:ARRA/ARRGA-A

0 EL 415

HAA347BP__ HAA347BP__

BTPA:ARRC/ARREC-C

795 EL<1160

HAA347BP__ HAA347BP__

O.2 O.5 1O.1 O.2 O.3 O.5 O.8 1.2 2

O-1O

1�$� O.5�$� O.3�$� O.15�$� O.1�$�

>6-3O >3O-12O >12O-4OO >4OO-1OOO >1OOO-2OOO >3-6 >6 >1O-5O >5O-12O >12O-4OO>2OOO-4OOO >4OOO.5-6LENGTH/DIAMETER /

ISO 2768-1 ISO 2768-1 MEDIUM

O.5-3RADIUS/CHAMFER /

FIRST ANGLE

OTIS ENGINEERING HANGZHOU

WELDS

TOLERANCE

TOLERANCE

ANGLE (shorter side length) ( )

TOLERANCE

THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.

WARNING

C

UNPUBLISHED WORK OTIS ELEVATOR COMPANY

C

THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.

WARNING

C

UNPUBLISHED WORK OTIS ELEVATOR COMPANY

C

HE0103A

2016-04-30

ARRANGMENT OF INTER. SUPPORT

CAT20449

THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.

WARNING

C

UNPUBLISHED WORK OTIS ELEVATOR COMPANY

C

z = LEG LENGTH

WELDING SYMBOLS AREUSED ON THIS DRAWING.

z =

WELDS z = LEG LENGTH

ANSI/AWS A2.4-98WELDING SYMBOLS ARE

USED ON THIS DRAWING.z =

ANSI/AWS A2.4-98

WELDS z = LEG LENGTHISO 2553-1992

WELDING SYMBOLS AREUSED ON THIS DRAWING.

z =

ISO 2553-1992

10

zzz

z

z

DWG

DRAWN MATERIAL :

CHK

APPD

AUTH

A3

SPEC :

FINISH :

1

A

2 3 4

B

C

D

A

B

C

D

1 2 3 4

SHEET SHEETS

ORIGINAL DATE

:2016-04-26

FROM CHINA AREA Rev.2016-04-26

ACCORDING WITH OTIS DOCUMENT 52847 & DRAWING MANUAL ENG_H_S002 OTIS 52847 ENG_H_S002

Changes

ALL DIMENSIONS METRIC

STANDARD

EL

BL

(835+EL)/2+25

835+EL 200

200

2045-EL

EL

BL

(835+EL)/2+25

835+EL 200

200

2045-EL

(2045-EL)2+25

EL

BL835+EL 200

200

2045-EL

(2045-EL)/2+25

BL

795EL

440+EL 200

200

2045-EL

(2045-EL)/2+25

795

415

415

,

BTPA:ARRB/ARRD/ARRFB-B

795 EL<1160

HAA347BP__ HAA347BP__

BTPA:ARRB/ARRD/ARRFB-B

415<EL<795

HAA347BP__ HAA347BP__

BTPA:ARRB/ARRD/ARRFB-B

0 EL 415

HAA347BP__ HAA347BP__

BTPA:ARRC/ARREC-C

0 EL<795

HAA347BP__ HAA347BP__

O.2 O.5 1O.1 O.2 O.3 O.5 O.8 1.2 2

O-1O

1�$� O.5�$� O.3�$� O.15�$� O.1�$�

>6-3O >3O-12O >12O-4OO >4OO-1OOO >1OOO-2OOO >3-6 >6 >1O-5O >5O-12O >12O-4OO>2OOO-4OOO >4OOO.5-6LENGTH/DIAMETER /

ISO 2768-1 ISO 2768-1 MEDIUM

O.5-3RADIUS/CHAMFER /

FIRST ANGLE

OTIS ENGINEERING HANGZHOU

WELDS

TOLERANCE

TOLERANCE

ANGLE (shorter side length) ( )

TOLERANCE

THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.

WARNING

C

UNPUBLISHED WORK OTIS ELEVATOR COMPANY

C

THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.

WARNING

C

UNPUBLISHED WORK OTIS ELEVATOR COMPANY

C

HE0103A

2016-04-30

ARRANGMENT OF INTER. SUPPORT

CAT20449

THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.

WARNING

C

UNPUBLISHED WORK OTIS ELEVATOR COMPANY

C

z = LEG LENGTH

WELDING SYMBOLS AREUSED ON THIS DRAWING.

z =

WELDS z = LEG LENGTH

ANSI/AWS A2.4-98WELDING SYMBOLS ARE

USED ON THIS DRAWING.z =

ANSI/AWS A2.4-98

WELDS z = LEG LENGTHISO 2553-1992

WELDING SYMBOLS AREUSED ON THIS DRAWING.

z =

ISO 2553-1992

11

zzz

z

z