+ All Categories
Home > Documents > Fit Check for P2/N95 respirator · P2/N95 mask under your chin with the nosepiece up Pull headbands...

Fit Check for P2/N95 respirator · P2/N95 mask under your chin with the nosepiece up Pull headbands...

Date post: 17-Aug-2020
Category:
Upload: others
View: 4 times
Download: 0 times
Share this document with a friend
1
Step 1 Step 3 Step 5 Step 6 Step 6a. Positive seal check Step 6b. Negative seal check Step 2 Step 4 Current as of 18 May 2020 Perform hand hygiene Perform hand hygiene Select the P2/N95 mask that Select the P2/N95 mask that fits you well. Only touch the fits you well. Only touch the outer edges. Separate the outer edges. Separate the edges and straps. Slightly edges and straps. Slightly bend the nosepiece to form a bend the nosepiece to form a gentle curve gentle curve Use index fingers Use index fingers to separate the to separate the headbands. Hold headbands. Hold the headbands the headbands in your fingers in your fingers and position the and position the P2/N95 mask P2/N95 mask under your under your chin with the chin with the nosepiece up nosepiece up Pull headbands Pull headbands up over your head up over your head and ensure top and ensure top strap is resting strap is resting high at the back high at the back of the head and of the head and above ears. above ears. Ensure bottom Ensure bottom strap is positioned strap is positioned below ears. below ears. Place fingertips of both hands at the Place fingertips of both hands at the top of the metal nosepiece. Mold the top of the metal nosepiece. Mold the nosepiece, using the fingers of each nosepiece, using the fingers of each hand, to the shape of your nose. hand, to the shape of your nose. Pinching the nosepiece using only Pinching the nosepiece using only one hand may result in less effective one hand may result in less effective respirator performance respirator performance Exhale sharply. A positive pressure Exhale sharply. A positive pressure inside the respirator = no leakage. inside the respirator = no leakage. If leakage, adjust the position and/or If leakage, adjust the position and/or tension straps tension straps Inhale deeply. If no leakage, negative Inhale deeply. If no leakage, negative pressure will make respirator cling to pressure will make respirator cling to your face your face Leakage will result in loss of negative Leakage will result in loss of negative pressure in the respirator due to air pressure in the respirator due to air entering through gaps in the seal entering through gaps in the seal Continue to fit PPE in the recommended Continue to fit PPE in the recommended order order Once a good facial fit has been Once a good facial fit has been achieved, proceed to Steps 6a. and 6b achieved, proceed to Steps 6a. and 6b Fit Check for P2/N95 respirator Adapted with approval from WHO Western Pacific Region and Sunshine Coast Hospital and Health Service Adapted with approval from WHO Western Pacific Region and Sunshine Coast Hospital and Health Service
Transcript
Page 1: Fit Check for P2/N95 respirator · P2/N95 mask under your chin with the nosepiece up Pull headbands up over your head and ensure top strap is resting high at the back of the head

Step 1

Step 3

Step 5 Step 6

Step 6a. Positive seal check

Step 6b. Negative seal check

Step 2

Step 4

Current as of 18 May 2020

Perform hand hygienePerform hand hygiene Select the P2/N95 mask that Select the P2/N95 mask that fits you well. Only touch the fits you well. Only touch the outer edges. Separate the outer edges. Separate the edges and straps. Slightly edges and straps. Slightly bend the nosepiece to form a bend the nosepiece to form a gentle curvegentle curve

Use index fingers Use index fingers to separate the to separate the headbands. Hold headbands. Hold the headbands the headbands in your fingers in your fingers and position the and position the P2/N95 mask P2/N95 mask under your under your chin with the chin with the nosepiece upnosepiece up

Pull headbands Pull headbands up over your head up over your head and ensure top and ensure top strap is resting strap is resting high at the back high at the back of the head and of the head and above ears. above ears. Ensure bottom Ensure bottom strap is positioned strap is positioned below ears.below ears.

Place fingertips of both hands at the Place fingertips of both hands at the top of the metal nosepiece. Mold the top of the metal nosepiece. Mold the nosepiece, using the fingers of each nosepiece, using the fingers of each hand, to the shape of your nose. hand, to the shape of your nose. Pinching the nosepiece using only Pinching the nosepiece using only one hand may result in less effective one hand may result in less effective respirator performancerespirator performance

• • Exhale sharply. A positive pressure Exhale sharply. A positive pressure inside the respirator = no leakage.inside the respirator = no leakage.

• • If leakage, adjust the position and/or If leakage, adjust the position and/or tension strapstension straps

• • Inhale deeply. If no leakage, negative Inhale deeply. If no leakage, negative pressure will make respirator cling to pressure will make respirator cling to your faceyour face

• • Leakage will result in loss of negative Leakage will result in loss of negative pressure in the respirator due to air pressure in the respirator due to air entering through gaps in the sealentering through gaps in the seal

Continue to fit PPE in the recommended Continue to fit PPE in the recommended orderorder

Once a good facial fit has been Once a good facial fit has been achieved, proceed to Steps 6a. and 6bachieved, proceed to Steps 6a. and 6b

Fit Check for P2/N95 respirator

Adapted with approval from WHO Western Pacific Region and Sunshine Coast Hospital and Health ServiceAdapted with approval from WHO Western Pacific Region and Sunshine Coast Hospital and Health Service

Recommended