7
FIVE X FACETED AND LUMINOUS
FIVE X
FACETED AND LUMINOUS
Named after 5-axis machining, the Five X collection utilizes a CNC machine that can move a tool on five different axes at the same time. Through advanced machining technology and digital fabrication, LightArt developed a line that combines geometry with a sculptural twist.
Advanced machining technology and digital fabrication.
FIVE X
CIRCULAR 01 / Project: 55 W. Washington Lobby / Location: Chicago, IL / Dimensions: 83"L x 83"W x 24"H / Material: Gesso / Speci�er: Shive-Hattery Architecture Interiors
PIVOT CIRCULAR 02 / Project: Hensel Phelps / Location: Washington, DC / Dimensions: 99"L x 71"W x 16"H / Material: Cranberry x2 / Speci�er: ZGF Zimmer Gunsul Frasca Architects
RAY / Project: Navigant / Location: Chicago, IL / Dimensions: (2) 94"L x 20"W x 6"H / Material: Vapor + Pure White + Ghost / Speci�er: IA Interior Architects
PIVOT LINEAR 03 / Project: AutoDesk / Location: San Francisco, CA / Dimensions: 112"L x 8"W x 15"H / Material: Tiger Y15 + Hush Gesso + Ghost / Speci�er: Revel Architecture & Design
PIVOT ZIGZAG 01 / Project: AECOM / Location: Dallas, TX / Dimensions: 130"L x 22"W x 7"H / Material: Pure White / Speci�er: Aecom
PIVOT CIRCULAR 01 / Project: Design Office / Location: Seattle, WA / Dimensions: 83"L x 83"W x 24"H / Material: Hush Gesso
(206) 524-2223 [email protected]
LIGHTART is a registered trademark of 3form, LLC. The products depicted herein may be covered by one or more of the following U.S. or international patents, and/or one or more U.S. or international patents pending: D604,890, D620,636, D665,120, D686,363, D745,206, 5,643,666, 5,894,048, 5,958,539, 5,998,028, and 6,025,069. For more information, see: http://www.3-form.com/downloads/3form_IP.pdfPrinted by Blanchette Press.July 2018 | MARCOM - FIVE X | REV 002
Pivot: 1/16˝ stainless steel cables to ceilingRay: 3/64˝ stainless steel cables to ceiling
Rectangular canopy for RayWhite canopy and dress plate mounts to round electrical box96˝ power cord attached to fixture
Solid state LED system (Ray + Pivot)120-277v driver (Ray + Pivot)Dimmable LED screw-in type E26 base A19 lamp 9w, 3000w, 800 lumen, 120v (Plot only)
Dimming 0-10v (Ray + Pivot)3000K, 3500K, 4000K (selected fixtures)
LIGHTINGHARDWARE
PIVOT CIRCULAR 01
83˝L x 83˝W x 24˝H - 154w
P002 x2
P001 x4
PIVOT LINEAR 03
112˝L x 8˝W x 15˝H - 72w
P005 x1
P004 x1
P001 x2
P006 x2
P003 x2
P005 x3
P004 x1P003 x4
P006 x2
P005 x1
P004 x1
P006 x2
P002 x2
P001 x2
P003 x5
P006 x1
P001 x3
P007 x1
PIVOT LINEAR 01
96˝L x 8˝W x 7˝H - 58w
RAY
47˝L x 20˝W x 6˝H - 68w 63˝L x 20˝W x 6˝H - 92w 78˝L x 20˝W x 6˝H - 116w 94˝L x 20˝W x 6˝H - 140w
PIVOT ZIGZAG Z-01
130˝L x 22˝W x 7˝H - 92w
PIVOT CIRCULAR 03
83˝L x 79˝W 24˝H - 168w
PLOT
Table Lamp: 23˝H x 7˝Dia - 9w Pendant: 12˝H x 7˝Dia - 9w
P002 x3
P001 x2
P003 x2
P006 x2
P004 x2
PIVOT CIRCULAR 02
99˝L x 71˝W x 16˝H - 142w
