Flairlight's latest LED lighting Catalogue

The Original

MADE IN GERM

ANY

LED Lighting Product Information V 16.1

Tel. 01372 888455 (w) www.flairlight.co.uk

2

4 - 55 - 6

7

89

1011

12

131516171819

22 - 232425262829

32 - 3435 - 39

40

4041

42

44454647484950

52

53545556575859

60

66676869

70 - 7172 - 73 74 - 75

7677 - 78

7980 - 81

82838485 86

87 - 8992 - 93

94

959697

98 - 104

106

Legend Products by article number

Design and Object Lighting

Object-light 230 V, 3 W side-Light 230 V, 3 WSigma 230 V, 30 W Slimstyle 230 V, 25/30/40W

Garden Lights, Object Lights and Recessed Spots

Clar 230 V, 50/100 WClarios II 24 V, 15 WClarios fl ex beam 24 V, 10/15 WClarios-mini 12 V, 3 WLight belt 12 V, 3/5 WLED wallwasher lineo, 24 VBrilliance 24 V, 10 W + brilliance 24 V, 10 W ds -NEW Brilliance-maxi 24 V, 20 W - NEWBrilliance-midi 12 V, 3 WBrilliance-midi narrow 12 V, 3 W - NEW Brilliance-mini 12 V, 1 W Dome-spot 12 V, 3 WAccessories for garden and object lights Connection Examples

Pool and pond spots

Aquaros 20, 24 V, 20 W Aquaros 5, 12 V, 5 W

Accent Light Points

dot-spot, 8 mm, 12 V, 0,25 Wmini-disc, 14 mm, 12 V, 0,25 Wquad-dot, 10 x 10 mm, 12 V, 0,25 Wdisc-dot + quad-dot 45, 20 mm, 12 V, 0,25 Wfrog-dot, 14 mm, 0,25/0,5 Wstarlight-crystal, 12 V, 0,25/0,5 Wstarlight fi ber-optic, 230 V AC, 3 W

Complete Set

RGB set of 1 or 3 ► 230 V, 12 V, 5 WLED spotlight set of 1 ► 230 V, 4 WMinispot set of 1 or 3 ► 230 V, 12 V, 3 WLED recessed spot set of 3 ► 230 V, 12 V, 1 WLED recessed spot set of 3 ► 230 V, 12 V, 3 WAccent light points outdoor set of 5 ► 230 V, 12 V, 0,25 W Accent light points indoor set of 5 ► 230 V, 12 V, 0,25 W

LED Linear Lighting

slimlux 3,5slimlux XS 10x15 slimlux 7/7 Kslimlux 19 Fslimlux 19slimlux 19 VA - NEW slimlux 19 Hslimlux 19 Kslimlux 19 180°slimlux eck 45°slimlux 30 x 30slimlux 10 fl ex 6 W/m slimlux 10 fl ex 8 W/m slimlux 10 fl ex 18 W/m slimlux 13,5 fl ex 8 W/m slimlux 17,5 fl ex 18 W/m slimlux 18/30 odLED Handrail Lighting

RIGILUX® LED Linear Lighting

RIGILUX® 19 VIRIGILUX® 19 TIRIGILUX® 30 VI

Power Supply and Accessories

LED displays

Table of contents

3

Leg

end

These terms are our daily incentive to continue designing new LED solutions for you.

Quality – In the case of LED lighting for exterior appli-cations in particular, reliability and durability depend to a great extent on the quality of the components and materials, and on optimum design. dot-spot products are well-known for their long service life even under extreme conditions of deployment.

Fascination – The LED is one of the most energy savings way of creating light. Thanks to its very special properties, the LED opens up totally new design options which the whole dot-spot team translates into customer-oriented solutions with dedication and passion.

Responsibility – dot-spot products mainly add value in the economic sphere in which our customers live.The production and use of quality products is an active contribution to environmental protection and responsible use of resources.

QualityFascination

Responsibility

Made in Germany

Quality - Fascination - Responsibility

Art.-No. Model Watt

object-light

10101.XX.XX.XX ol al silver 3 W 230 V AC

10102.XX.XX.XX ol w white 3 W 230 V AC

Art.-No. transparent opaque CRI Art.-No. Art.-No. Design

XXXX.00.XX.XX warm white, 3000 K 144 lm 124 lm 80 XXXX.XX.00.XX opaque 60° XXXX.XX.XX.00 round

XXXX.01.XX.XX cool white, 6300 K 208 lm 179 lm 65 XXXX.XX.01.XX transparent 60° XXXX.XX.XX.01 square

dot-spot Tel. 01372 888 455 | www.flairlight.co.uk

4

Legend

Leg

end

Area of deployment interior

Area of deployment interior / exterior

Area of deployment underwater

Will bear your weight

Drivable up to 3 tonnes

Operating voltage

Protection class I, protective earth

Protection class II, protective insulation

Protection class III, low voltage protection, SELV

Stainless steel 316 L

Aluminium

THERMOPROTECT protective circuit

Includes CE marking

Product characteristics

Composition of item numbers for products with different features:

1. Product selection (example: object-light, colour warm white)

10102 00 00 01Item number: object-light white ► warm white colour ► foggy lens ► square design

3. Feature 2, opaque lens, 60° 4. Feature 3, square design

With safety/contour plug

With 12 V connector system, IP 44

With M12 connector system

Installation diameter

Installation depth

Dimmable

Housing color

Operating voltage: AC = alternating current, DC = direct current

Design round/square/round with lens

Light color

Lighting current

Lens

Range of application indoor, outdoor, underwater

Color Rendering Index

Radiation angle

Diameter

Cable outlet

Cable with plug conncetor

Plastic-sheathed cable

Twin strand (ts)

Plug M12

Housing plug

Plug IP 44

Plug for linear lighting

2. Feature 1, light colour warm white

+/-

CRI

3 t

V4A316 L

12 VAC/DC

ALU

THERMOPROTECT

Des

ign

and

Obje

ct L

ight

ing

dot-spot5

Made in Germany

International protection class:

First digit, protection against foreign objects and accidental contact:

IP 68

Legend

0 - No Protection1 - Protected against solid foreign objects with diameter greater than 50mm, protected access with back of hand 2 - Protected against solid forgeign object with diameter greater than 12.5, protected agaisnt access with one finger3 - Protected against solid foreign objects with diameter greater than 2.5mm, protected againt access with a tool4 - Protected again solid foreign objects with diameter greater than 1.0mm, protected against access with a wire5 - Protected against dust in harmful quantity, complete protection against contact6 - Dust proof, complete protection against contact

Second digit, protection against water

o - No protection1 - Protected against vertically falling drops of water 2 - Protected against dripping water when the enclosure is tilted up to 15 degrees3 - Protection against water spray falling to 60 degrees from the vertical4 - Protected against splashing water 5 - Protected agaisnt water jets (nozzle) from any angle6 - Protected against powerful water jets7 - Protection against temporary immersion, max. 30 min, up to 1m8 - Protection against continuous immersion, no time limit, up to 1m

Ryan

Line

Ryan

Line

Ryan

Line

Ryan

Line

Ryan

Line

Ryan

Line

Ryan

Line

Ryan

Line

Des

ign

and

Obje

ct L

ight

ing

dot-spot6

Products by article number

Art.No. Model Page

10101 object-light Aluminium 8

10102 object-light white 8

11101 side-light Aluminium 9

11102 side-light white 9

15001 Sigma LED Living Space Luminaire natural oak 10

15002 Sigma LED Living Space Luminaire dark oak 10

15010 LED wall washer slimstyle 11

15011 LED wall washer slimstyle RGB 11

15012 LED wall washer slimstyle RGBW 11

20015 clarios II 15

20015 clarios II hc¹ 15

20110 clarios fl ex beam 10 W 16


20111 clarios flex beam hc³ 10 W 16


20116 clarios flex beam hc³ 15 W 16

20500 aquaros 20 40

20700 aquaros 5 41

21350 clar 50 W 13

21450 clar 100 W 13

22000 clarios-mini 17

23336 LED wall washer Lineo 336 mm 19



24501 LED wall washer Lineo RGB 501 mm 19

24996 LED wall washer Lineo RGB 996 mm 19

25000 230 V Spot Set 54

25001 RGB Spot 1er Set 53

25003 RGB Spot 3er Set 53

25101 Minispot 1er Set 55

25103 Minispot 3er Set 55

25203 Colorgarden LED recessed spot 1 W 56

25303 Colorgarden LED recessed spot 3 W 57

25405 Colorgarden set of 5 outdoor accent light points 58

25415 Colorgarden set of 5 indoor accent light points 59

26100 light belt clm 18

26110 light belt clm extension 18

26200 light belt cl RGB 18

26210 light belt cl RGB extension 18

30010 brilliance 10 W 22

30015 brilliance 10 W ds 23

30020 brilliance-maxi 20 W 24

30110 brilliance 10 W HC³ 22

30120 brilliance-maxi 20 W HC³ 24

30115 brilliance 10 W HC ds 23

31100 brilliance-midi round design 25

31200 brilliance-midi square design 25

32100 brilliance-mini round design 28

32200 brilliance-mini square design 28

34100 dome recessed spot light 1, 3 W 29



35100 brilliance-midi narrow round design 26

35200 brilliance-midi narrow square design 26

50100 dot-spot 8 mm 44

50400 mini-disc f 45

50410 mini-disc g 45

50500 quad-dot 46

50600 frog-dot 0,25 W 48

50605 frog-dot 0,5 W 48

50700 disc-dot 47

50800 quad-dot 45 47

50905 starlight-crystal 49

51000 starlight fi ber-optic 50

51100 starlight fi ber-optic spark 50

Art.No. Model Page

62070 slimlux 7 68

62071 slimlux 7K 68

62072 End caps sl 7/7k 68

62100 slimlux XS 10x15 67

62101 End caps sl XS 67

62190 slimlux 19 70 - 71

62190A End caps sl 19 70 - 72

62191 slimlux 19 F 69

62191A End caps sl 19 F 69

62192 slimlux 19 H 74 - 75

62192A End caps sl 19 H 74 - 75

62193 slimlux 19 K 76

62193A End caps sl 19 K 76

6219262195

slimlux 19 VA 72

62300 slimlux 30x30 80 - 81

62301 End caps sl 30x30 80 - 81

62450 slimlux eck 45° 79

62451 End caps sl eck 45° 79

63018 slimlux 18 od 87 - 89

63030 slimlux 30 od 87 - 89

63031 Connection sl 18/30 87 - 89

64106 slimlux 10 fl ex 6 W/m 82

64107Connection sl 10 fl ex 6 W/m

82


64109 Connection sl 10 fl ex 8 W/m 83


64111 Connection sl 10 fl ex 18 W/m 84

64135 slimlux 13,5 fl ex 8 W/m 85

64136 Connection sl 13.5 fl ex 8 W/m 85

64175 slimlux 17,5 fl ex 18 W/m 86

64176 Connection sl 17,5 fl ex 18 W/m 86

65003 slimlux 3,5 66

69194 slimlux 19 180° 75 - 76

69195 Connection & end caps sl 19 180° 75 - 76

70020 slimlux Handrail-Set IP 20 92 - 93

70067 slimlux Handrail-Set IP 67 92 - 93

75191 RIGILUX 19 VI 95

75192 RIGILUX 19 TI 96

75300 RIGILUX 30 VI 97

9XXXX Accessories 32 - 34 / 98 - 104

▪

▪

▪

All catalogue details on power and light current refer to the (complete) luminaire.

Lumen and Kelvin values are typical values and are subject to usual tolerances of ± 5%.

CRI values are minimum values

End caps 19VA

Tel. 01372 888 455 | www.flairlight.co.uk

Des

ign

and

Obj

ect L

ight

ing

dot-spot7

Made in Germany

Design and Object Lighting

Moulded LED, protection class IP 64 Fits in standard pattress boxes Ø 55 mm

Installation depth only 30 mm

Cover plate Anodized aluminum, or with white coating, round or square

LED for direct operation at 230 V

Best quality glass lense, clear or gloss; with 60° reflection angle

Easy to assemble, wide range of applications. This spotlight fits perfectly in standard plaster, cavity and concrete wall boxes with diameter 55 mm.

The side-light is perfect for dazzle free illumination of hallways, paths, steps etc. due to its partly covered lens.

As a down-light, the object-light is perfect for illuminating hallways, porches etc.

The clear lens provides a light beam with sharp edges.

The diffuse lens provides a soft transi-tion between the dark background and the light beam.

As bright as a 20 W halogen, 230 V – no ballast required!

Both lights are optionally available with a clear or diffuser lens:

Direct connection to 230 V - no ballast required.

1

Des

ign

and

Obj

ect L

ight

ing

dot-spot8

object-light 230 V, transparent + opaque

1.000 object-light, student accommodation Oberwiesenfeld in the Olympic Village Munich:

80

mm

60 mm

3 mm 32mm 30 mm

80 mm 80 mm

▪ LED recessed luminaire for direct connection to 230 V power supply and installation in flush mounted and cavity wall sockets; perfect for lighting corridors, canpoies and more

▪

protection class IP 64, also suitable for exterior use; stainless steel fitting screws and seal ring included▪

power requirement only 3 W, as light as 20 W halogen

▪

housing Anodized aluminum, or with white coating, with round or square cover; genuine glass lens transparent or opaque▪

dimmable (e.g. with Eltako universal dimmer EUD61NPN-UC)

▪ operable temperature range - 25°C up to + 45°C

illumination

anodised aluminum and painted white

230 VAC

ALU

Art.-No. Model Watt

object-light

10101.XX.XX.XX ol al silver 3 W 230 V AC

10102.XX.XX.XX ol w white 3 W 230 V AC





Des

ign

and

Obj

ect L

ight

ing

dot-spot9

Side-light 230 V, transparent + opaque

80

mm

60 mm

80 mm

80 mm

3 mm 32mm 30 mm

▪ LED recessed luminaire with glare protection for direct connection to 230 V power supply and installation in flush mountedand cavity wall sockets; perfect for illuminating paths, stairwells, corridors and more

▪ protection class IP 64, also suitable for exterior use; stainless steel fitting screws and seal ring included▪ power requirement only 3 W, as light as 20 W halogen▪ housing Anodized aluminum, or with white coating, with round or square cover; genuine glass lens transparent or opaque▪ dimmable (e.g. with Eltako universal dimmer EUD61NPN-UC)▪ operable temperature range - 25°C up to + 45°C

Made in Germany

illumination

Floor

wall

Art.-No. Model Watt

side-light

11101.XX.XX.XX sl al silver 3 W 230 V AC

11102.XX.XX.XX sl w white 3 W 230 V AC




anodised aluminum and painted white

230 VAC

ALU

Sigma LED living space luminaire – Design Markus Bischof

800 - 1350 mm60 mm

40 mm

1240 mm

400mm

Sigma by Markus Bischof

▪ design LED living space luminaire with 30 Watt▪ high quality materials: solid Oak, with aluminum core▪ handcrafted in Germany▪ connection with included power supply in lamp baldachin to 230 V voltage▪ power connection over tie rope▪ hang-up cable from 80 to 135 cm▪ design; Natural Oak, light oiled or Bog Oak, dark oiled▪ dimmable with integrated dimmer▪ long LED service life > 50.000 hrs

dot-spot10

Des

ign

and

Obj

ect

Ligh

ting

Art.-No. Model Color Watt CRI

Sigma natural oak, light oiled

15001 Sigma h natural oak, light oiled 30 W 230 V warm white, 2700 K 2000 lm 85 120° diffuse

Sigma bog oak, dark oiled

15002 Sigma d dark oak, dark oiled 30 W 230 V warm white, 2700 K 2000 lm 85 120° diffuse

230 VAC

230 V IP 20


dot-spot11

Made in Germany

LED wall washer slimstyle

▪ LED wall washer with extremely stylish and slim design▪ massive aluminum lamp body with metal foot▪ handcrafted in Germany▪ 3 versions:

- warm white, with dimmer- colour RGB, with remote control- colour RGBW, for colour and white light with remote control

▪ connection power warm white 40 W, colour 30 W

Des

ign

and

Obj

ect

Ligh

ting

19

00

mm

18 mm

26 mm

120°

180 mm

18

0 m

m

Art.-No. Model Color Watt CRI

slimstyle

15010 slimstyle ww silver 40 W 230 V warm white, 3000 K 3360 lm 80 120° 3 m

slimstyle RGB

15012 slimstyle RGBW silver 30 W 230 V color RGBW, 3000 K 2800 lm 75 120° 3 m

15011 slimstyle RGB silver 25 W 230 V color RGB 540 lm 120° 3 m

230 VAC

230 V IP 20 ALU

2 Garden, building and recessed spots

Increase your living space with the perfect garden and ob-ject lighting. With the right lighting you benefi t more from your garden or pond. Extend the period of use beyond the day. By doing so you will experience even more new and interesting facets of your home.dot-spot offers a series of different spots for the most vari-ous lighting tasks. Thanks to their plain elegance the spots integrate harmonically into any environment without being obtrusive. The range of sophisticated accessories not only enables you to integrate the garden lighting system in a functional way, but also perfectly considering the aesthetic point of view.

The clar series combines a high light yield and a very el-egant and compact design. Featuring up to 8340 lumens and dispersion angles of 30°, 45° and 60° the clar is ide-al for illuminating big plants and buildings. The models of the clar series are equipped with an active thermal man-agement system and are therefore also applicable under extreme conditions.

Gar

den,

Bui

ldin

g an

d R

eces

sed

Spot

s

dot-spot12

original size

165 mm

138 mm

ø 124 mm

Clar 50/100 high-performance spots


Gar

den,

Bui

ldin

g an

d R

eces

sed

Spot

s

13

Made in Germany dot-spot

124 mm 138 mm

16

5 m

m

Art.-No. Model Watt

clar 230 V

21350.XX.XX clar 50 50 W 230 V AC 5 m Schuko

21400.XX.XX clar 100 100 W 230 V AC 5 m Schuko

Art.-No. 50 W 100 W CRI Art.-No.

XXXX.00.XX warm white, 2700 K 4790 lm 7520 lm 80 XXXX.XX.30 30°

XXXX.01.XX cool white, 5000 K 5310 lm 8340 lm 70 XXXX.XX.45 45°

XXXX.XX.60 60°

230 VAC

IP 66 ALU THERMOPROTECT30-60

50 mm

Ø 5 mm

Ø 15 mm

5 x 0,34 mm²

▪ High-performance spot for illuminating objects and plants, 50 / 100 W▪ extremely compact design Ø only 124 mm, length 138 mm▪ 50 W version with passive cooling, 100 W with membrane fan, (only 25 db(A))▪ anodized aluminum housing with mounting bracket ▪▪ with THERMOPROTECT system to protect against overheating, operable temperature range - 25°C up to + 45°C▪

dimmable variants available upon request

High Performance Spot 230 V, 50 / 100W

1,5m supply line with M12 plug, power supply 5m cable with shockproof plug, external power supply included in the scope of delivery

dot-spot14

Garden, building and recessed spots

The clarios series, unique in the world:

clarios combines an excellent design and unique technol-ogy. Featuring 15 W of LED power and up to 1570 lm with a diameter of only 60 mm the clarios may be the smallest LED garden spot with the highest output density. Further-more, the clarios is also available as a 10 W variant as well as a mini version with 3 W.

Gar

den,

Bui

ldin

g an

d R

eces

sed

Spot

s

IP 68, 100% sealed housing, applicable also under water

With efficient high-power LEDs, with 10 and 15 W for up to 1570 lm

No risk of burns, maximum housing temperature approx. 60°C

Excellent thermal management with rib design; the THERMOPROTECT electronics additionally protects the LED against overheating

Tempered glass, 4 mm thick

Stainless steel 316L housingLenses for 10 - 40° dispersion angles, clarios fl ex beam with adjustable dispersion angle of 10 - 45°

Robust connection cable, with separate dimmer input, with optional protection against martens

With stable mounting bracket, horizontally and vertically housing, with optional stainless steel ground spike and/or mounting extension

THERMOPROTECT

LEDs are extremely robust and durable, but there is one thing that LEDs can‘t stand up to, and that is high temperatures. dot-spot lights from 3 Watt are thus additionally equipped with the THERMO-PROTECT system. If the critical temperatures occur in the light (e.g. due to direct sunlight, heat venting blocked etc.), the THERMO- PROTECT electronics reduce the power to avoid the LED overheating.


15

dot-spotMade in Germany

Gar

den,

Bui

ldin

g an

d R

eces

sed

Spot

s

Garden and building spot clarios II 24 V, 15 W

stainless steel

82 mm

65 mm

100 mm

70 mm

▪ probably the most compact LED spot with the greatest performance on the market; 15 W, up to 1570 lm; connects directly to24 V DC, dimmable

▪ for atmospheric lighting of trees, plants and architecture, also usable underwater▪ unique design, silver coloured stainless steel 316L housing; supplied with mounting bracket, dowel and screw▪ 0 - 100% dimmable with PWM dimmer via separate dimming input▪ installation extensions for installation at various heights, stainless steel peg and marten repellent available as custom accessories▪ with 15 W brand-name LED and integrated driver electronics; excellent thermal management with THERMOPROTECT

system which prevents the spot from overheating and thus ensures a long LED service life▪ operable temperature range - 25°C up to + 45°C; different connection variants available

THERMOPROTECT3-40

V4A316 L

Article-No. Model Watt

clarios II

20015.XX.XX.XX clarios II V4A / 316L 24 V DC 15 W

20016.XX.XX.XX clarios II hc 1 V4A / 316L 24 V DC 15 W

Article-No. CRI Article-No. Article-No.

XXXX.00.XX.XX warm white, 2700 K 1502 lm >80 XXXX.XX.13.XX 13° XXXX.XX.XX.33 5 m

XXXX.11.XX.XX neutral white, 4000 K 1502 lm >80 XXXX.XX.20.XX 20° XXXX.XX.XX.41 0,3 m

XXXX.02.XX.XX blue 389 lm - XXXX.XX.30.XX 30° XXXX.XX.XX.42 5 m

XXXX.03.XX.XX green 762 lm -

XXXX.04.XX.XX amber 869 lm -

XXXX.05.XX.XX red 762 lm -

Honeycomb glare protection, -10% light intensity

accessories ► clarios II

Art.-No. Model Description

93000 ES 20 stainless steel peg with M6 screw and lock washer

93001 MS marten repellent, length 50 cm, for mounting to the connection cable

93201 MV 100 installation extension 100 mm

Additional accessories from page ► 32 + 98

50 mm

Ø 5 mm Ø 15 mm

5 x 0,34 mm²

Ø 5 mm

3 x 0,5 mm²

Garden and building spot clarios flex beam 24 V

stainless steel

▪ Powerful LED surface mount spot 10 and 15 W made from stainless steel, with adjustable beam angle of 10 – 45°▪ for atmospheric lighting of plants and architecture, applicable also under water▪ unique design, silver coloured stainless steel 316L housing; delivery with mounting bracket, dowel and screw▪ 0 - 100% dimmable with PWM dimmer via separate dimming input▪ installation extensions for installation at various heights, stainless steel peg and marten repellent available as custom accessories▪ excellent thermal management for a very long LED life▪ operable temperature range - 25°C up to + 45°C▪ different connection variants available

Gar

den,

Bui

ldin

g an

d R

eces

sed

Spot

s

dot-spot16

THERMOPROTECT

V4A316 L


clarios fl ex beam

20110.XX.XX clarios fb 10 V4A / 316L 24 V DC 10 W

20111.XX.XX clarios fb 10 hc 3 V4A / 316L 24 V DC 10 W

20115.XX.XX clarios fb 15 V4A / 316L 24 V DC 15 W

20116.XX.XX clarios fb 15 hc 3 V4A / 316L 24 V DC 15 W

Accessories ► clarios fl ex beam





Article-No. 10 Watt 15 Watt CRI Article-No.

XXXX.00.XX warm white, 2700 K 829 lm 1000 lm >80 XXXX.XX.33 5 m

XXXX.11.XX neutral white, 4000 K 893 lm 1080 lm >80 XXXX.XX.41 0,3 m

XXXX.01.XX cool white, 5000 K 956 lm 1150 lm >80 XXXX.XX.42 5 m

XXXX.99.XX RGB 1 270 lm - -

XXXX.98.XX RGBW, 4000 K 1,2 386 lm - >80

1. Available only in the version clarios fb 10 W, operating voltage 12 V 2. Open only with 5 m connection 3. Honeycomb glare protection, -10% light intensity

clarios fl ex beam, the fi rst garden spot growing with your plantsThe dispersion angle of the clarios fl ex beam can be set to 10 – 45 ° by turning the front panel.This offers unique advantages:

▪ exact setting of the dispersion

angle directly at the object

▪ adjustment of the dispersion angle

for plant growth


82 mm

65 mm

100 mm

70 mm

50mm

Ø 5 mm Ø 15 mm

5 x 0,34 mm²

Ø 5 mm

3 x 0,5 mm²

RGB: 5 x 0,25 mm²

RGBW: 6 x 0,25 mm²


Gar

den,

Bui

ldin

g an

d R

eces

sed

Spot

s

17


Garden and building spot clarios-mini 12 V, 3 W

▪ compact LED spot with 3 W Power LED, connects directly to 12 V DC; excellent luminosity, available with a variety of beam angles

▪ for atmospheric lighting of plants and architecture, also usable underwater▪ unique design, stainless steel 316 L housing; supplied with mounting bracket and special rawl plugs▪ 0 - 100% dimmable with PWM dimmer via separate dimming input▪ installation extensions for installation at various heights, stainless steel peg and marten repellent available as custom accessories▪ with 3 W brand-name LED and integrated driver electronics; excellent thermal management with THERMOPROTECT system

which prevents the spot from overheating and thus ensures a long LED service life > 50,000 hrs▪ operable temperature range - 25°C up to + 45°C▪ different connection variants available

50 mm

30

mm

50 mm

38 mm

65 mm

12 VDC

THERMOPROTECT6-40

V4A316 L


clarios-mini

22000.XX.XX.XX clarios mini V4A/316L 12 V DC 3 W

Article-No. CRI Article-No. Article-No.


XXXX.11.XX.XX neutral white, 4000 K 207 lm >80 XXXX.XX.25.XX 25° XXXX.XX.XX.41 0,3 m

XXXX.01.XX.XX cool white, 5700 K 216 lm >80 XXXX.XX.40.XX 40° XXXX.XX.XX.42 5 m

XXXX.02.XX.XX blue, 470 nm 81 lm -

XXXX.03.XX.XX green, 528 nm 173 lm -

XXXX.04.XX.XX amber, 617 nm 122 lm -

XXXX.05.XX.XX red, 625 nm 145 lm -

XXXX.99.XX.XX RGB 1 86 lm -

Accessories ► clarios-mini



93102 BSM stainless steel dazzle protection for clarios-




1 Optimum RGB colour mixing only with 40° lens

50 mm

Ø 5 mm

Ø 15 mm

5 x 0,34 mm²

Ø 5 mm

3 x 0,5 mm²

RGB 5 x 0,25 mm²

Light belt, Tree belt with LED spots

▪ flexible, weatherproof tree belt made of EPDM material, equipped with 3 LED spots for illuminating treetops, ideal for gastronomy, private gardens and parks

▪ equipped with 3 clarios-mini spots 3 W, or 3 clarios RGB spots 5 W, anodized aluminum housing▪ expandable up to max. 6 spots▪ complete set, with sixfold adapter, extension cable 5 m, remote control for RGB version and power supply▪ The tree belt is flexible and therefore does not hinder tree growth, Length of tree belt 2 m, for trees of up to 60 cm

trunk diameter; cable on the spot 1.5 m

Art.-No. Model Watt

light belt

26100 light belt clm warm white, 2700 K 207 lm 40° 12 V AC/DC 3 x 3 W

26200 light belt cl RGB RGB ca. 120 lm 60° 12 V AC/DC 3 x 5 W

Art.-No. Model Watt

Extension spot 26110 clm tree warm white, 2700 K 207 lm 40° 12 V AC/DC 3 W

26210 cl RGB tree RGB ca. 120 lm 60° 12 V AC/DC 5 W

light belt ▪ wiring diagram

5 m

3 m

2 m

12 V

Gar

den,

Bui

ldin

g an

d R

eces

sed

Spot

s

dot-spot18

light belt clm

light belt cl RGB

40clm 60cl ALU


336 / 666 / 996 mm39 mm

54 mm

28 mm

Ø 5 mm

2 x 0,5 mm²

RGB: 5 x 0,35 mm²

Gar

den,

Bui

ldin

g an

d R

eces

sed

Spot

s

19


LED Wallwasher lineo, 24 V

▪ High-quality Wallwasher, extremely bright at very small dimensions, with Cree Power LEDs▪ fully encapsulated, for outdoor use▪ anodized aluminum housing, with 5 m connection cable▪ available with different lengths and beam angles, optional with glare protection▪ long service life, > 50,000 h, operable temperature range from - 25°C to + 45°C

IP 67 ALU24 VDC

17-43

Article-No. Model Length Watt

lineo white

23336.XX.XX.XX lineo 336 336 mm 24 V DC 24 W 5 m



lineo RGB

24501.XX.XX.XX lineo 501 RGB 501 mm 24 V DC 27 W 5 m

24996.XX.XX.XX lineo 996 RGB 996 mm 24 V DC 54 W 5 m

Article-No. CRI Article-No. Article-No. Option

XXXX.00.XX.XX warm white, 3000 K 4.500 lm/m 80 XXXX.XX.17.XX 17°XXXX.XX.XX.01

XXXX.01.XX.XX neutral white, 4000 K 5.130 lm/m 80 XXXX.XX.26.XX 26°

XXXX.--.XX.XX RGB 1.500 lm/m - XXXX.XX.37.XX 37°XXXX.XX.XX.00

XXXX.XX.43.XX 43°x16°

Accessories ► lineo


93501 MB 1 lineo mounting bracket, distance 15 mm




dazzle protection

Attention: two brackets are required for the lineo 996 model

Aspire Torch tower in Doha, with 3800 RGB special lights

Special luminaire, developed for the Aspire Torch Tower.

Anodized aluminum housing, with PMMA 180-degree light dome, Ø 80 x 120 mm, 9 W RGB, internal driver with THERMOPROTECT system to protect against overheating and overvoltage.

21


Gar

den,

Bui

ldin

g an

d R

eces

sed

Spot

s

Garden, building and recessed spots

brilliance recessed spot with patented ball-based swivelling mechanism The brilliance LED recessed spot is one of the few recessed spots on the markets specially developed for the requirements of LED technology. Therefore, it offers crucial advantages:

▪ best heat dissipation despite swivelling luminaire body▪ extremely compact design with high light yield▪ completely made from 316L stainless steel – no corrosion▪ THERMOPROTECT protective circuit against overheating

of the LED▪ 20 W variant with specially anodised fl oor sleeve ▪ Protection class IP 68, applicable also under water

Optimum heat dissipation towards the spot body by a large contact area of the spherical luminaire housing

Easy swivelling of the luminaire by loosening the compression ring on the back of the spot and turning the luminaire housing

The floor sleeve of the brilliance 20 W additionally serves as a means for large-area heat dissipation towards the surrounding ground. The LED spot is screwed to the mounting sleeve. In order to prevent corrosion, the aluminium floor sleeve is coated with a special anodised layer.

Conventional LED recessed floor spot with approx. 20 W and approx. 2000

brilliance-maxi 20 W, 2150 lm

> 200 mm 100 mm

Reduce to the max!

Thanks to its very small design the brilliance maxi can be used for a variety of applications without being ob-trusive.

25° 25°

dot-spot

Recessed spot brilliance 24 V, 10 W

▪ pivoting recessed LED spot, 10 W; beam angles 10, 20 und 35° available▪ for illuminating plants or architecture or as wall or floor sidelight ▪ installation in floors and walls, even under water▪ 0 - 100% dimmable with PWM dimmer via separate dimming input▪ also available as brilliance 10 W HC, with integrated Honeycomb glare protection▪ body in 316L stainless steel, with tempered glass plate and mounting clamp, mounting sleeve 150 mm x Ø 80 mm included▪ pivoting lamp unit with innovative ball mechanism▪ THERMOPROTECT system, avoids overheating of the spotlight ensuring a very long life of the LED, > 35,000 hrs.▪ operable temperature range - 25°C up to + 45°C▪ different connection variants available

75 mm

80 mm100 mm

65 mm

72 mm

75 mm

25° 25°

brilliance with Honeycomb glare protection

3 t

THERMOPROTECT

24 VDC

10-35V4A

316 L

Art.-No. Model Watt

brilliance

30010.XX.XX.XX brilliance 10 W 10 W 24 V DC

30110.XX.XX.XX brilliance 10 W HC 3 10 W with Honeycomb 24 V DC

Art.-No. CRI Art.-No. Art.-No.


XXXX.11.XX.XX neutral white, 4000 K 629 lm >80 XXXX.XX.20.XX 20° XXXX.XX.XX.40 Plug/Stecker

XXXX.01.XX.XX cool white, 5000 K 629 lm >80 XXXX.XX.35.XX 35° XXXX.XX.XX.41 0,3 m

XXXX.02.XX.XX blue, 465 nm 278 lm - XXXX.XX.XX.42 5 m





XXXX.98.XX.XX RGBW, 4000 K 1,2 386 lm -

Installation depth with housing plug + 60 mm

1 Operating voltage 12 V, optimum colour mixing only with 35° lens 2 Open only with 5 m connection

3 Honeycomb glare protection, -10% light intensity

Accessories from page ► 32 + 98

50 mm

Ø 5 mm

Ø 15 mm

5 x 0,34 mm²

Ø 5 mm

3 x 0,5 mm²

RGB: 5 x 0,25 mm²

RGBW: 6 x 0,25 mm²

Gar

den,

Bui

ldin

g an

d R

eces

sed

Spot

s

22


23


Gar

den,

Bui

ldin

g an

d R

eces

sed

Spot

s

Recessed spot brilliance 24 V, 10 W ds, with theft protection - NEW

▪ pivoting recessed LED spot, 10 W; beam angles 10, 20 und 35° available▪ bolted version, theft protection, screwed to specially anodized aluminum installation sleeve▪ for illuminating plants or architecture or as wall or floor sidelight ▪ installation in floors and walls, even under water▪ 0 - 100% dimmable with PWM dimmer via separate dimming input▪ also available as brilliance 10 W HC, with integrated Honeycomb glare protection▪ body in 316L stainless steel, with tempered glass plate and mounting clamp, mounting sleeve 150 mm x Ø 80 mm included▪ pivoting lamp unit with innovative ball mechanism▪ THERMOPROTECT system, avoids overheating of the spotlight ensuring a very long life of the LED, > 35,000 hrs.▪ operable temperature range - 25°C up to + 45°C▪ different connection variants available

3 t

THERMOPROTECT

24 VDC

10-35V4A

316 L

50 mm

Ø 5 mm Ø 15 mm

5 x 0,34 mm²

Ø 5 mm

3 x 0,5 mm²

RGB: 5 x 0,25 mm²

RGBW: 6 x 0,25 mm²

Art.-No. Model Watt

brilliance

30015.XX.XX.XX brilliance 10 W ds 10 W 24 V DC

30115.XX.XX.XX brilliance 10 W HC 3 ds 10 W with Honeycomb 24 V DC




XXXX.01.XX.XX cool white, 5000 K 629 lm >80 XXXX.XX.35.XX 35° XXXX.XX.XX.41 0,3 m

XXXX.02.XX.XX blue, 465 nm 278 lm - XXXX.XX.XX.42 5 m





XXXX.98.XX.XX. RGBW, 4000 K 1,2 386 lm -

1 Operating voltage 12 V, optimum colour mixing only with 35° lens 2 Open only with 5 m connection 3 Honeycomb glare protection, -10% light intensity


100 mm

100 mm

12 mm

65 mm

163 mm160 mm

84 mm

25° 25°

dot-spot24

Gar

den,

Bui

ldin

g an

d R

eces

sed

Spot

s

Recessed spot brilliance-maxi 24 V, 20 W - NEW

▪ pivoting recessed LED spot 20 W; beam angles 10, 20 und 35° available▪ for illuminating plants or architecture or as wall or floor sidelight ▪ extremely compact design, with specially anodised aluminium floor sleeve; for floor mounting, only with floor sleeve▪ 0 - 100% dimmable with PWM dimmer via separate dimming input▪ also available as brilliance mx 20 W HC, with integrated Honeycomb glare protection▪ body in 316L stainless steel, with tempered glass plate, screwed into a specially anodised aluminium floor sleeve▪ pivoting lamp unit with innovative ball mechanism, available with pre-set angle▪ THERMOPROTECT system, avoids overheating of the spotlight ensuring a very long life of the LED, > 35,000 hrs.▪ operable temperature range - 25°C up to + 45°C▪ different connection variants available

3 t

THERMOPROTECT

24 VDC

10-35

Ø 5 mm

3 x 0,5 mm²

Art.-No. Model Watt

brilliance-maxi

30020.XX.XX.XX brilliance mx 20 W 20 W 24 V DC

30120.XX.XX.XX brilliance mx 20 W HC 1 20 W with Honeycomb 24 V DC




XXXX.01.XX.XX cool white, 5000 K 2150 lm >80 XXXX.XX.35.XX 35°

1 Honeycomb glare protection, -10% light intensity


Residence garden Hilpoltstein with brilliance 10 W

100 mm

100 mm

12 mm

65 mm

163 mm160 mm

84 mm

25° 25°


25


Gar

den,

Bui

ldin

g an

d R

eces

sed

Spot

s

Recessed spot brilliance-midi 12 V, 3 W

▪ LED recessed spot with 3 W Power LED, connects directly to 12 V DC, with lens, for illuminating plants and architecture oras incidental lighting on walls and floors; installation in floors, walls and ceilings, also underwater

▪ housing stainless steel 316 L, with hardened glass pane and mounting bracket; installation sleeve 83 (150) mm x Ø 44 mm included

▪ available with round or square design▪ 0 - 100% dimmable with PWM dimmer via separate dimming input▪ optionally available with fixed swivel lens inclined by 15°, beam angle 20°▪ with 3 W brand-name LED and integrated driver electronics; excellent thermal management with THERMOPROTECT system

prevents the spot from overheating and thus ensures a long life > 50.000 hrs▪ operable temperature range - 25°C up to + 45°C▪ different connection variants available

50

mm

32m

m

3 8 m m

2 mm

50 mm

42 - 45 mm

60 mm

40

mm

15°

20°

20° swivel lens (permanently set at the factory)

3 t

THERMOPROTECT6-40

12 VDC

V4A316 L


50 mm

Ø 5 mm Ø 15 mm

5 x 0,34 mm²

Ø 5 mm

3 x 0,5 mm²

RGB 5 x 0,25 mm²

Art.-No. Model Watt Design

brilliance-midi

31100.XX.XX.XX bmd r V4A/316L 3 W 12 V DC round

31200.XX.XX.XX bmd q V4A/316L 3 W 12 V DC square



XXXX.11.XX.XX neutral white, 4000 K 207 lm >80 XXXX.XX.25.XX 25° XXXX.XX.XX.34 10 m

XXXX.01.XX.XX cool white, 5700 K 216 lm >80 XXXX.XX.40.XX 40° XXXX.XX.XX.40 Plug/Stecker

XXXX.02.XX.XX blue, 485 nm 81 lm - XXXX.XX.35.XX 13 x 35° XXXX.XX.XX.41 0,3 m

XXXX.03.XX.XX green, 528 nm 173 lm - XXXX.XX.20.XX 20° XXXX.XX.XX.42 5 m

XXXX.04.XX.XX amber, 617 nm 122 lm - swivel lens (not for RGB)




1 Optimum RGB colour mixing only with 40° lens

dot-spot26

Gar

den,

Bui

ldin

g an

d R

eces

sed

Spot

s

Recessed spot brilliance-midi narrow 12 V, 3 W - NEW

▪ LED recessed spot with 3 W Power LED, connects directly to 12 V DC, with lens, especially as incidental lighting on walls andfloors; installation in floors, walls and ceilings, also underwater

▪ version with deep-set LED, for a narrow-beamed and sharp-edged 10-degree light beam and blackened housing for reduced glare▪ aluminum body, anodized in black color, with stainless steel cover plate, with hardened glass pane and mounting bracket;

installation sleeve 83 (150) mm x Ø 44 mm included▪ available with round or square design▪ 0 - 100% dimmable with PWM dimmer via separate dimming input▪ with 3 W brand-name LED and integrated driver electronics; excellent thermal management with THERMOPROTECT system

prevents the spot from overheating and thus ensures a long life > 50.000 hrs▪ operable temperature range - 25°C up to + 45°C▪ different connection variants available

50

mm

32

mm

1 , 38 38mm

2 mm

50 mm

42 - 45 mm

60 mm

40

mm

3 t

THERMOPROTECT10

12 VDC

V4A316 L


50 mm

Ø 5 mm Ø 15 mm

5 x 0,34 mm²

Ø 5 mm

3 x 0,5 mm²

RGB 5 x 0,25 mm²


brilliance-midi narrow

33100.XX.XX.XX bmd nr r V4A/316L 3 W 12 V DC round

33200.XX.XX.XX bmd nr q V4A/316L 3 W 12 V DC square



XXXX.11.XX.XX neutral white, 4000 K 207 lm >80 XXXX.XX.XX.34 10 m

XXXX.01.XX.XX cool white, 5700 K 216 lm >80 XXXX.XX.XX.40 Plug/Stecker

XXXX.02.XX.XX blue, 485 nm 81 lm - XXXX.XX.XX.41 0,3 m

XXXX.03.XX.XX green, 528 nm 173 lm - XXXX.XX.XX.42 5 m




IP 67 ALU


27


Gar

ten-

/ O

bjek

tstr

ahle

r und

Ein

baul

euch

ten ▪ G

arde

n, B

uild

ing

and

Rec

esse

d Sp

ots ▪ L

umin

aire

s po

ur ja

rdin

et o

bjet

s et

spo

ts e

ncas

trés

Historical "Kettensteg" in Nuremberg with brilliance-midi

Gar

den,

Bui

ldin

g an

d R

eces

sed

Spot

s

dot-spot28

Recessed spot brilliance-mini 12 V, 1 W 3

2 m

m

2 mm

50 mm

42 - 45 mm

60 mm

40

mm

38 mm

50

mm

▪ LED recessed spot with 1 W Power LED, connects directly to 12 V DC, diffuse lighting, perfect as a path and marker light for installation in floors, walls and ceilings, and underwater

▪ housing stainless steel 316 L, with hardened glass pane and mounting bracket; installation sleeve 83 (150) mm x Ø 44 mm included

▪ available with round or square design▪ with 1 W brand-name LED and integrated driver electronics for a long life > 50,000 hrs▪ operable temperature range - 25°C up to + 45°C; different connection variants available

3 t

12 VDC

V4A316 L

Constant current or constant voltage system?

All dot-spot LED spots are operated by the constant-volt-age system. Therefore, the spots can be directly oper-ated with 12 or 24 V direct voltage. Multiple spots are connected in parallel as it is known from the 230 V volt-age supply network. Even in the case of longer lines the upstream driver electronics protect the LED from voltage peaks.

In constant-current systems the single LED spots are connected in series. The power supply provides a con-stant current for a specifi c number of LED spots. This series connection is often not so easy to realise in exten-sive installations. Furthermore, in this case the LEDs are more sensitive to voltage peaks, e.g. caused by lightning strikes.

12 V DC24 V DC

230 V / 50 Hz LED

LED driver Constant current system:

LED Constant voltage system:

350 mA,700 mA,1050 mA

230 V / 50 Hz

Constant current driver:


brilliance-mini

32100.XX.XX bm r V4A/316L 1 W 12 V DC

32200.XX.XX bm q V4A/316L 1 W 12 V DC

Art.-No. CRI Art.-No.

XXXX.00.XX warm white, 2700 K 88 lm >80 XXXX.XX.33 5 m

XXXX.11.XX neutral white, 4000 K 88 lm >80 XXXX.XX.34 10 m

XXXX.01.XX cool white, 5700 K 92 lm >80 XXXX.XX.40 Plug/Stecker

XXXX.02.XX blue, 485 nm 41 lm - XXXX.XX.41 0,3 m

XXXX.03.XX green, 528 nm 96 lm - XXXX.XX.42 5 m

XXXX.04.XX amber, 617 nm 56 lm -

XXXX.05.XX red, 625 nm 56 lm -



50 mm

Ø 5 mm Ø 15 mm

5 x 0,34 mm²

Ø 5 mm

3 x 0,5 mm²


29


Recessed dome-spot 12 V, 3 W

▪ LED effect lighting with 3W Power LED, connects directly to 12 V DC, as path marker or for effect lighting on walls and ceilings; installation in floors, walls and ceilings

▪ drivable, sand-blasted housing made of stainless steel 316 L; includes mounting bracket and installation sleeve 83 (150) mm x Ø 44 mm

▪ unique design, with 1x, 2x or 3x light beam▪ 0 - 100% dimmable with PWM dimmer via separate dimming input▪ with 3 W brand-name LED and integrated driver electronics for a long life > 50,000 hrs▪ operable temperature range - 25°C up to + 45°C▪ different connection variants available

58

mm

38mm

9 mm

42 - 45 mm

60 mm

38 mm

12 VDC

V4A316 L


dome-spot

34100.XX.XX dome 3W 1 V4A/316L 3 W 12 V DC 1 x




XXXX.00.XX warm white, 2700 K 230 lm 1 >80 XXXX.XX.33 5 m

XXXX.11.XX neutral white, 4000 K 230 lm 1 >80 XXXX.XX.34 10 m

XXXX.01.XX cool white, 5700 K 240 lm 1 >80 XXXX.XX.40 Plug/Stecker

XXXX.02.XX blue, 485 nm 90 lm 1 - XXXX.XX.41 0,3 m

XXXX.03.XX green, 528 nm 192 lm 1 - XXXX.XX.42 5 m

XXXX.04.XX amber, 617 nm 136 lm 1 -

XXXX.05.XX red, 625 nm 167 lm 1

XXXX.99.XX RGB 95 lm 1

1 Lumen values of the LED, without DOME cover


50 mm

Ø 5 mm Ø 15 mm

5 x 0,34 mm²

Ø 5 mm

3 x 0,5 mm²

RGB 5 x 0,25 mm²


Gar

den,

Bui

ldin

g an

d R

eces

sed

Spot

s

Gar

ten-

/ O

bjek

tstr

ahle

r und

Ein

baul

euch

ten ▪ G

arde

n, B

uild

ing

and

Rec

esse

d Sp

ots ▪ L

umin

aire

s po

ur ja

rdin

et o

bjet

s et

spo

ts e

ncas

trés

dot-spot Tel. +49 (0) 9128 / 72 22 17 - 0 | www.dot-spot.de

30

HeadlineHeadlineHeadline

Gar

den,

Bui

ldin

g an

d R

eces

sed

Spot

s

31


Unique – dot-spot easy RGB

The first professional plug-and-play outdoor RGB solution featuring radio, DMX, KNX or Dali control. Just connect many different spot models via the waterproof plug system in order to obtain a coherent lighting concept.

Choose the desired RGB spots from the product pages. The matching plug-and-play RGB controls and dimmers can be found on the pages 32 – 34.

brilliance 10 W

brilliance-midi / narrow

clarios fl ex beam

clarios-mini

aquaros 5 / 20

dome-spot

RGB Controller / Dimmer

fb funk 1k / RGB

Compatible spots for plug-and-play RGB and dimming system:

dot-spot32

Power supplies plug system 12/24 V, IP 67

▪ High-quality LED power supplies, ready-made, with safety plug on the primary side and M12 plug system on the secon dary side

▪ fully encapsulated version, IP 67

▪ protected against short circuit, overload, overvoltage and overtemperature

▪ Input voltage 90 – 305 V DC, 127-431 V DC

▪ Observe installation instructions on p.39

Power supplies plug system 12 V, IP 67 Art.-No. Model Description Dimensions

90125 nt 12/25 67 M12 Power supply 12 V/25 W, IP67, with prim. contour plug, sec. M12 connector 148 x 40 x 32 mm

90126 nt 12/40 67 P Power supply 12 V/40 W, IP67, with prim. contour plug, sec. power plug 162,5 x 43 x 32 mm

90127 nt 12/60 67 P Power supply 12 V/60 W, IP67, with prim. contour plug, sec. power plug 162,5 x 43 x 32 mm

90128 nt 12/150 67 P Power supply 12 V/132 W, IP67, with prim. shockproof plug, sec. power plug228 x 68 x 38,8 mm

90129 ntV 12/60/6 Power supply 12 V/60 W, IP67, with prim. contour plug, sec. 6-way distributor, 6 x M12 socket 162,5 x 43 x 32 mm 140 x 55 x 40 mm

12 V connection and distribution systemArt.-No. Model Description Dimensions

92700 HV 12/1 12 V main cable mono, power plug to 1 x M12 socket 1,5 m

92701 HV 12/6 12 V 6-way main distributor, power plug to 6 x M12 socket140 x 55 x 40 mm

1,5 m

Power supplies plug system 24 V, IP 67Art.-No. Model Description Dimensions

90317 nt 24/25 67 M12 Power supply 24 V/25 W, IP67, with prim. contour plug, sec. M12 connector 148 x 40 x 32 mm

90318 nt 24/60 67 M12 Power supply 24 V/60 W, IP67, with prim. contour plug, sec. M12 connector 162,5 x 43 x 32 mm

90319 nt 24/90 67 P Power supply 24 V/90 W, IP67, with prim. contour plug, sec. power plug 161 x 61 x 36 mm

90320 nt 24/150 67 P Power supply 24 V/150 W, IP67, with prim. shockproof plug, sec. power plug 228 x 68 x 38,8 mm

90321 nt 24/240 67 P Power supply 24 V/240 W, IP67, with prim. shockproof plug, sec. power plug 244,2 x 68 x 38,8 mm

90322 nt 24/320 67 P Power supply 24 V/320 W, IP67, with prim. shockproof plug, sec. power plug 252 x 90 x 43,8 mm

90323 ntV 24/90/4 Power supply 24 V/90 W with prim. contour plug, sec. 4-way distributor, 4 x M12 socket161 x 61 x 36 mm 135 x 55 x 40 mm

24 V connection and distribution system Art.-No. Model Description Dimensions

92800 HV 24/1 24 V main cable mono, power plug to 1 x M12 socket 1,5 m

92801 HV 24/6 24 V 6-way main distributor, power plug to 6 x M12 socket 140 x 55 x 40 mm1,5 m

Plug system & accessories for garden/object and recessed spots

Gar

den,

Bui

ldin

g an

d R

eces

sed

Spot

s

IP 67


33


12/24 V RGB-Controller/Dimmer

▪ High-quality LED power supplies, ready-made, with safety plug on the primary side and

▪ M12 plug system on the secondary side

▪ Fully encapsulated version, IP 67


▪ Input voltage 90 – 305 V DC, 127-431 V DC

▪ Observe installation instructions on p.39

Dimmer

Art.-No. Model Description Dimensions

92702 HV dm 12/3k 12 V 6-way main distributor with integrated radio dimmer, or RGB radio controller, supply line, power plug to 6 x M12 socket

140 x 55 x 40 mm1,5 m

92802 HV dm 24/1k24 V 6-way main distributor with integrated radio dimmer, supply line, power plug to 6 x M12 socket

140 x 55 x 40 mm1,5 m

Wireless remote control for RGB radio dimmer modules


91501 fb funk 1K Wireless remote control for 12/24 V main distributor with radio dimmer 110 x 70 x 20 mm

91500 fb funk RGB Wireless remote control for 12 V main distributor with radio RGB radio controller 110 x 70 x 20 mm

Distributor for 12-V and 24-V system Art.-No. Model Description Dimensions

94510 UV 2 T T-distributor, 1 x M12 plug on 2 x M12 socket

94511 UV 2 Y Y-distributor, for installation in floor sleeves, 1 x M12 socket on 1 x M12 plug + M12 socket

94512 UV 4 4-way distributor with supply line, 1 x M12 plug on 4 x M12 socket 135 x 55 x 40 mm1,5 m



93601 BS ps M12 Blind cap for open M12 sockets

Extension and connection cable for 12/24 V systemArt.-No. Model Description Dimensions

92205 VLK M12-1,5 Connecting cable, M12 plug /socket Ø 15 mm / 1,5 m

92206 VLK M12-5 Connecting cable, M12 plug /socket Ø 15 mm / 5 m

92207 VLK M12-10 Connecting cable, M12 plug /socket Ø 15 mm / 10 m

92650 AK M12-0,3 ST Connecting cable, M12 plug to open endØ 15 mm / 0,3 m

(5 x 0,34mm²)


Gar

den,

Bui

ldin

g an

d R

eces

sed

Spot

s

IP 67

HV dm 12/3kHV dm 24/1k

fb funk 1K fb funk RGB

dot-spot34

Extension and connection cable for 12/24 V system Art.-No. Model Description Dimensions

92651AK M12-5 ST

Connecting cable, M12 plug to open endØ 15 mm / 5 m(5 x 0,34mm²)

92652AK M12-0,3 BU

Connecting cable, open end to M12 socketØ 15 mm / 0,3 m

(5 x 0,34mm²)

92653AK M12-5 BU

Connecting cable, open end to M12 socketØ 15 mm / 5 m(5 x 0,34mm²)

92654 AS P ST+BU Connection set power plug with cable socket and plug, for creating extensions and feeds for dimmers Ø 30 x 58 mm

Shrinking tube for additional sealing Art.-No. Model Description Dimensions

94603 ssk 16/12 Shrinking tube for additional sealing of M12 connections 120 mm

94602 ssk 16/120 Shrinking tube to be cut individually 1200 mm

Control modules for integration into DMX, DALI ore KNX systems


91310.XXcModule DMX M12

DMX control module for the 12 V / 24 V connection system, controllable dimming module in IP64 housing cable gland per cable on site, power supply input power plug 150 x 150 x 57 mm

91311.XXcModule DALI M12

DALI control module for the 12 V / 24 V connection system, controllable dimming module in IP64 housing cable gland per cable on site, power supply input power plug 150 x 150 x 57 mm

91312.XXcModule KNX M12

KNX control module for the 12 V / 24 V connection system, controllable dimming module in IP64 housing cable gland per cable on site, power supply input power plug 150 x 150 x 57 mm


XXXXX.01 12/1k Variant 12/1K dimmer, output 1 x power plug, max. 144 Watts

XXXXX.02 24/1k Variant 24/1K dimmer, output 1 x power plug, max. 300 Watts

XXXXX.03 12/3k/1 Variant RGB, output 1 x M12 housing socket, max. 25 Watts

XXXXX.04 12/3k/6 Variant RGB, output 6 x M12 housing socket, max. 6 x 25 Watts


Gar

den,

Bui

ldin

g an

d R

eces

sed

Spot

s


35


Gar

den,

Bui

ldin

g an

d Re

cess

ed S

pots

Connection examples for garden, building and recessed spots

dot-spot garden / object spots and recessed luminaires can be delivered with different connection features. The following options can be selected depending on the luminaire model:

Connection type Cabling

5 m open cable 10 m open cable

Free cabling

Housing plug, installed 0.3 m with plug 5 m with plug

Plug system

2: Connection of the spots with free cabling, with dimmer

- Dim

Power supply

PWM DimmerInput

Output DimDim

Dimmer constant voltage output (dimmer for LED stripes)

On = Dimming contact to against ground closed, Off = Dimming contact open, maximum PWM frequency 1,000 Hz

1: Connection of the spots with free cabling, without dimmer

- Dim

Attention: bridge (blue) between (–) and (– dim) is mandatory!

Power supply = -

= += DIM

3: Connection of the spots with free cabling, with dimmer; multiple spots, multiple power supplies if necessary

- Dim

- Dim

- Dim

Power supply

Power supply

Do not connect to other power supplies!

PWM Dimmer

Input

Output DimDim

Lights with open cable

The open cable connection of the luminaires must be car-ried out by professionals being electrically trained only. Using open cables, the luminaires can be connected with dot-spot or usual installation accessories. Please note that the protec-tion class of the installation accessories is suitable for the selected type of installation.

Lights with M12 connector system

Regarding the connector system, dot-spot offers a vast range of ready-to-plug accessories for setting up complex systems. All power supplies are equipped with mains plugs, therefore the system can also be installed by persons without electrical training.

The following schematics show indications the cabling of the different systems:

Gar

den,

Bui

ldin

g an

d R

eces

sed

Spot

s

dot-spot36

4. Connection of the spots with free cabling, RGB system

BGR

nt 12/30 nt 12/30

fc funk

230 V / 50 Hz 230 V / 50 Hz

clarios flex beam clarios-mini brilliance-midi brillliance

fb funk

: = -

= += B = G

= R

Small 24 V system, monochromatic

clarios flex beam20115.XX.42

brilliance 10 W30010.XX.XX.42

clarios II grün20015.04.XX.42

brilliance-maxi 20 W30020.XX.XX.40

5 m 5 m 10 m5 m

ntV 24/90/490323

VLK M12-1092207


Example systems with connector system

brilliance-mini / -midi with connector system

brilliance-midi 3 W31XXX.XX.XX.40

UV 2 Y94511

Ø 17 mm + Ø 17 mm +Ø 17 mm +

Ø 42 - 45 mm

Tube

Ø 100 mmL 100 mm

Emtpy conduitVLK M12-1,5922051,5 m

......

Paving

80 mm


Gar

den,

Bui

ldin

g an

d R

eces

sed

Spot

s

37



Example RGB system with radio controller

2 mHV dm 12/3k92702

UV 694513

UV 2 T94510

8 x brilliance-midi RGB31100.99.XX.42

8 x brilliance-midi RGB31100.99.XX.42

nt 12/150 67 P90128 2 m

5 m

VLK M12-592206

fb funk91500

PlugSocket

5 m

5 m

5 m

Example 12 V System, monochromatic, dimmed via radio

5 m 0,3 m

5 m

2 m

10 m

5 m

2 m

dome-spot34300.XX.42

UV 494512

VLK M12-1092207

brilliance-mini32100.XX.42

brilliance-mini32100.XX.41

VLK M12-592206

UV 2 T94510

HV dm 12/3k92702

fb funk 1k91501

PlugSocket

dot-spot38


Gar

den,

Bui

ldin

g an

d R

eces

sed

Spot

s

24-V system, with external dimmer, DALI, DMX or KNX

brilliance-maxi 20 W30020.XX.XX.40

UV 2 T94510

clarios flex beam 15 hc20116.XX.41

clarios II amber20016.05.XX.42

brilliance 10 W30010.XX.XX.42

clarios II20015.XX.XX.42

slimlux 18 od*63018.09.31.45.XX

clarios II20015.XX.XX.41

UV 494512

UV 2 Y94511

VS-194700

AK M12-0,3 ST92650

VLK M12-109220710 m

5 m2 m5 m

0,3 m

5 m5 m5 m

0,3 m

5 m

nt 24/240 67 P90321

HV 24/692801

2 m

cModule XXX M129131X.02

0,3 m

* = pre-dimmed

DMX/DALI/KNX d

Voltage system 12 V DC

Power output per distance in Watts (power output per socket main distributor or power supply)

Cable length in metres (length between main distributor socket or power supply and the furthest spot)

25 12

20 14

15 17

10 22

5 41

Voltage system 24 V DC Power output per distance in Watts (power output per socket main distributor or power supply)

Cable length in metres (length between main distributor socket or power supply and the furthest spot)

100 20

80 23

60 29

40 41

20 77

Maximum cable length depending on the connected power

The maximum length of the connection cables depends on the power of the connected luminaires. The line length indicates the length between the power supply connector (at the secondary side) or the cable distributor, and the luminaire. As a general rule, the low-voltage connection cables should be as short as possible:


39


dot-spot M12 cabling system

Gar

den,

Bui

ldin

g an

d R

eces

sed

Spot

s

Theory and practice − Outdoor installation of LED power supplies

Again and again, there are malfunctions or failures of LED power supplies that are installed in outdoor areas. Even if a power supply features the protections IP 67 – water-proof, temporary submersion of up to 30 min. – it can't be unrestrictedly installed in outdoor areas.

The IP 67 testing of the manufacturer is carried out within a defi ned period of time under laboratory conditions. In-fl uences such as permanent moistness, solar irradiation, frost and changing temperatures over the years are not considered.

Therefore, such power supplies, even those featuring high protection classes, should wherever possible be in-stalled in a protected area, e.g. in the cellar, garages or tool sheds. However, in case the power supply needs to be installed in an outdoor area, it should always be installed inside a suitable electrical cabinet in order to protect it against atmospheric infl uences. Direct solar irradiation onto the housing should be avoided.

Weather-related power supply failures are not covered under the manufacturers' warranty!

Power supply buried Power supply unprotected inside the ground shaft

Correct installation inside the electrical cabinet

Power supply inside electrical housing, inserted in elevated position, drainage for ground shaft

dot-spot40

Pool and pond spots aquaros 20

Gar

den,

Bui

ldin

g an

d R

eces

sed

Spot

s

24 VDC

THERMOPROTECT10-35

V4A316 L

▪ 20 W LED recessed spot, pivoting, for pools and ponds, luminosity max. 2100 lm▪ housing V4A surface electropolished, Ø only 100 mm, 5 m connection cable▪ pivoting lamp unit with innovative ball mechanism▪ with THERMOPROTECT protection system, avoids overheating of the LED▪ installation only with installation sleeve aq EH 100, further versions upon request

Art.-No. Model Watt

aquaros 20

20500.XX.XX aq 24 V 20 W V4A/316L 20 W 24 V DC 5 m


XXXXX.00.XX warm white, 2700 K 1840 lm >80 XXXXX.XX.10 10°

XXXXX.11.XX neutral white, 4000 K 1940 lm >80 XXXXX.XX.20 20°

XXXXX.01.XX cool white, 5700 K 2150 lm >80 XXXXX.XX.35 35°

XXXXX.02.XX blue, 485 nm 466 lm XXXXX.XX.99 diffuse

XXXXX.03.XX green, 535 nm 970 lm

XXXXX.04.XX amber, 595 nm 762 lm

XXXXX.05.XX red, 630 nm 762 lm

XXXXX.98.XX RGBW, 4000 K 1,2 386 lm

1 Operating voltage 12 V, optimum colour mixing only with 35° lens and diffuse2 Available only in the version 10 W

Accessories ► aquaros 20


93105 aq EH 100316L stainless steel installation sleeve for setting in concrete walls, or for welding into metal pools, with stainless steel cable gland and 1.5 m empty conduit

93106 aq DS 100 Sealing flange for sealing the installation sleeve aq EH 100 when mounting in plastic and foil pools, stainless steel screw flange, with 6 stainless steel screws and EPDM seal

98006 SW 15 Special tool SW 15 for screwing the cable gland inside oft he Installation sleeve, absolutely required!

Additional accessories from page ► 98

3

73 mm

10

0 m

m

3 mm

75 mm

Ø 5 mm

3 x 0,5 mm²

RGBW 6 x 0,25 mm²

124 mm

1 ,0 mm150 mm

30

mm

1,5 mm

Connection for empty conduit / cable gland VIP 68 internal

XXXXX.XX.99

XXXXX.XX.10XXXXX.XX.20XXXXX.XX.35

Sealing flange only required in case of plastic and liner ponds


41

Pool and pond spots aquaros 5

Gar

den,

Bui

ldin

g an

d R

eces

sed

Spot

s


6-40THERMOPROTECT

12 VDC

V4A316 L

▪ 5 W LED spot (3 W in case of coloured spots), for pools and ponds, luminosity 230 lm▪ Housing 316L surface electropolished, Ø aperture only 80 mm, connection cable 5 m▪ with THERMOPROTECT protection system, avoids overheating of the LED▪ installation only with installation sleeve EH 50

Accessories ► aquaros 5


93107 aq EH 50 316L stainless steel installation sleeve for setting in concrete walls, or for welding into metal pools, with stainless steel cable gland and 1.5 m empty conduit

93108 aq DS 50Sealing flange for sealing the installation sleeve aq EH 50 when mounting in plastic and foil pools, stainless steel screw flange, with 6 stainless steel screws and EPDM seal

98006 SW 15 Special tool SW 15 for screwing the cable gland inside oft he Installation sleeve, absolutely required!


Art.-No. Model Watt

aquaros 5

20700.XX.XX aq md 12 V 5 W V4A/316L 5 W 12 V DC 5 m


XXXXX.00.XX warm white, 2700 K 333 lm >80 XXXXX.XX.06 6°

XXXXX.11.XX neutral white, 4000 K 380 lm >80 XXXXX.XX.25 25°

XXXXX.01.XX cool white, 5700 K 433 lm >80 XXXXX.XX.40 40°

XXXXX.02.XX blue, 485 nm 81 lm XXXXX.XX.99 diffuse

XXXXX.03.XX green, 535 nm 173 lm

XXXXX.04.XX amber, 595 nm 122 lm

XXXXX.05.XX red, 630 nm 145 lm

XXXXX.99.XX RGB 1 86 lm

1 Optimum RGB colour mixing only with 40° lens or diffuse

Ø 5 mm

3 x 0,5 mm²

RGB 5 x 0,25 mm²

40 mm80 mm

2 mm

40 mm

90 mm

100 mm

30

mm

1,5 mm

Connection for empty conduit / cable gland VIP 68 internal

XXXXX.XX.99

XXXXX.XX.06XXXXX.XX.25XXXXX.XX.40

sealing flange only required in case of plastic and liner ponds

4 Accent light points

Heavy-duty, microbe-resistant polyurethane connection cable for outdoors installation, or extremely flat twin-cord cable for indoors

Integrated electronic driver unit secures the rated service life of the LED, direct operation with 12 V DC

Stainless steel 316 L housing made of thoroughly fi nished machined parts; salt water and stone salt resistant

Operation at ¾ of the rated current for extended service life of the LED

Photostaining-free front glass

Use of selected, high quality LEDs and electronic componentsPermanently fl exible, special casting

compound; connection line cast into the lamp to ensure durable impermeability, IP 68

100% quality control

Customized manufacturing in Germany

Stainless steel fastening clamp for easy and reliable fi tting

It has never been so easy to fl exibly and selectively imple-ment lighting solutions. The application range of the dot- spot LED accent light points is nearly boundless; indoor, outdoor, as well as underwater, these spotlights work as outstanding styling elements.

Due to their simple, unobtrusive stylishness, dot-spot LED accent lighting harmoniously blend into any surroundings; while almost invisible in the daytime, they create fascinat-ing atmosphere at night.

dot-spot42

Acc

ent

light

poi

nts


Prater Vienna, 500 mini-disc

dot-spot44

Acc

ent

light

poi

nts

dot-spot accent light point 8, 12 V DC

▪ 8 mm accent light point, robust type for exterior and underwater use, for atmospheric lighting of paths, drives, stairwells etc.

▪ with Nichia brand-name LED, for a long life

▪ high luminosity, resistant to vibration

▪ salt and chlorinated water resistant stainless steel 316 L housing


▪ microbe-proof PUR cable, directly molded with spot to form a water-tight bond

▪ small, elegant design, inconspicuous in the daytime, dazzle-free and fascinating lighting effects at night

30

mm

12

mm

0,6 mm

13 mm

9,8 mm

M 10x1

8 mm

10 mm

30 mm

1 ... 24 Spots

N / L220 - 240 V AC50 / 60 Hz

-+

12 V DC

10t

V4A316 L

Art.-No. Model Watt

dot-spot

50100.XX.XX dot-spot V4A/316L 0,25 W 12 V DC


XXXX.00.XX warm white, 2700 K 1,7 lm 80 XXXX.XX.01 5 m PUR

XXXX.01.XX cool white, 6000 K 2,4 lm 80 XXXX.XX.02 10 m PUR

XXXX.02.XX blue, 470 nm 1 lm

XXXX.03.XX green, 528 nm 2 lm

XXXX.04.XX amber, 617 nm 2 lm

XXXX.05.XX red, 625 nm 1 lm

Accessories ► dot-spot


93401 BF M 8 Installation kit with nut, spacer sleeve and gasket M 8

90104 nt 12/6 doPower supply 12 V 6 W, IP 20 for indoor use, installation in fl ush-mount boxes for a max. of 24 spots

50 x 40,8 x 21,5 mm

90105 nt 12/6 od Set Power supply 12 V 6 W, IP 65 for outdoor use, with water protected junction box, for max. 24 94 x 94 x 57 mm


Mount for all accent light points, installation depth only 10 mm ► www.dot-spot.de:

Ø 3,5 mm

2 x 0,25 mm²


45

Acc

ent

light

poi

nts

mini-disc, accent light point 14 mm, 12 V DC

Spot 1


5 t

V4A316 L

▪ 14 mm accent light point, installation depth only 10 mm with mounting clip, or length of 15 mm with screw fixing▪ mini-disc with round design▪ microbe-proof PUR connecting cable, molded water-tight with spot, for exterior installation▪ extremely thin ribbon cable, for mounting in floor, wall and panelling▪ long life > 50,000 hrs, excellent luminosity, resistant to vibration▪ salt and chlorinated water resistant stainless steel 316 L housing▪ operable temperature range - 25°C up to + 45°C▪ small, elegant design, inconspicuous in the daytime, dazzle-free and fascinating lighting effects at night

18 mm

0,6 mm

25 mm

14 mm

10

mm

20 mm

10 mm

1 ... 24 Spots

N / L220 - 240 V AC50 / 60 Hz

-+

12 V DC


mini-disc

50400.XX.XX md f V4A/316L 0,25 W 12 V DC Installation diameter (ID) 10 mm

50410.XX.XX md g V4A/316L 0,25 W 12 V DC ID 15 mm with thread + fi tting Kit=ge


XXXX.00.XX warm white, 2800 K 14 lm 80 XXXX.XX.01 5 m PUR

XXXX.01.XX cool white, 6000 K 16 lm 80 XXXX.XX.02 10 m PUR

XXXX.02.XX blue, 470 nm 2,8 lm XXXX.XX.11 7 m Fbl




XXXX.99.XX RGB 6 lm

Accessories ► mini-disc


90104 nt 12/6 do Power supply 12 V 6 W, IP 20 for indoor use, installation in flush-mount boxes for a max of 24 spots 50 x 40,8 x 21,5 mm

90105 nt 12/6 od set Power supply 12 V 6 W, IP 65 for outdoor use, with water protected junction box, for max. 24 spots 94 x 94 x 57 mm

91320

91321

91322

91323

91324

91500

easy RGB II funk

easy RGB II DMX

easy RGB II DALI

easy RGB II KNX

easy RGB II e

fb-funk

RGB controller for max. 34 lights w. power supply

RGB controller as above, but for DMX contr.

RGB controller as above, but for DALI contr.

RGB controller as above, but for KNX/EIB contr.

Expansion modul for 34 more spots

Radio controller for easy RGB II radio

-

200 x 120 x 80 mm

200 x 120 x 80 mm

200 x 120 x 80 mm

-

110 x 70 x 20 mm


0,6 mm

25 mm

14 mm

M 18 x 1

8,2 mm 15

mm

Ø 3,5 mm PUR

1,3 x 2,8 mm Fbl

2 x 0,25 mm²

RGB: Ø 5 mm,

4 x 0,25 mm²

2 x 0,25 mm²

RGB: 1,6 x 6,4 mm,

4 x 0,25 mm²

quad-dot, accent light point 10 x 10 mm, 12 V DC

▪ 10 x 10 mm accent light point, installation depth only 10 mm with mounting clip▪ with square design▪ microbe-proof PUR connecting cable, molded water-tight with spot, for exterior installation▪ extremely thin ribbon cable, for mounting in floor, wall and panelling▪ long life > 50,000 hrs, excellent luminosity, resistant to vibration▪ salt and chlorinated water resistant stainless steel 316 L housing▪ operable temperature range - 25°C up to + 45°C▪ small, elegant design, inconspicuous in the daytime, dazzle-free and fascinating lighting effects at night

10,5 mm

18 mm

0,6 mm

22 mm

10 mm

20 mm

10 mm

dot-spot46

Acc

ent

light

poi

nts

5 t

V4A316 L

1 ... 24 Spots

N / L

220 - 240 V AC

50 / 60 Hz

-+

12 V DC

Ø 3,5 mm PUR

1,3 x 2,8 mm Fbl

2 x 0,25 mm²

RGB: Ø 5 mm,

4 x 0,25 mm²

2 x 0,25 mm²

RGB: 1,6 x 6,4 mm,

4 x 0,25 mm²


quad-dot

50500.XX.XX quad-dot V4A/316L 0,25 W 12 V DC








XXXX.99.XX RGB 6 lm

Accessories ► quad-dot


90104 nt 12/6 do Power supply 12 V 6 W, IP 20 for indoor use, installation in flush-mount boxes for a max of 24 spots 50 x 40,8 x 21,5 mm


91320

91321

91322

91323

91324

91500

easy RGB II funk

easy RGB II DMX

easy RGB II DALI

easy RGB II KNX

easy RGB II e

fb-funk


RGB controller as above, but for DMX contr. RGB

controller as above, but for DALI contr. RGB

controller as above, but for KNX/EIB contr.

Expansion module for 34 more spots

Radio controller for easy RGB II radio

-

200 x 120 x 80 mm

200 x 120 x 80 mm

200 x 120 x 80 mm

-

110 x 70 x 20 mm



1 ... 24 Spots

N / L220 - 240 V AC50 / 60 Hz

-+

12 V DC

47

Acc

ent

light

poi

nts


disc-dot, quad-dot 45, accent light points 20 mm, 12 V DC

disc-dotdisc-dotquad-dot 45

▪ 20 mm accent light point, installation depth only 10 mm with mounting clip

▪ disc-dot with round, quad-dot 45 with square design

▪ microbe-proof PUR connecting cable, molded water-tight with spot, for exterior installation

▪ extremely thin ribbon cable 1,4 mm x 2,6 mm, for mounting in floor, wall and panelling

▪ long life > 50,000 hrs, excellent luminosity, resistant to vibration

▪ salt and chlorinated water resistant stainless steel 316 L housing


▪ striking, high quality design, dazzle-free, fascinating lighting effects

V4A316 L


disc-dot / quad-dot 45

50700.XX.XX disc-dot V4A/316L 0,25 W 12 V DC Ø 45 mm

50800.XX.XX quad-dot 45 V4A/316L 0,25 W 12 V DC 45 x 45 mm








XXXX.99.XX RGB 6 lm

45 mm

20 mm

45 mm38 mm

10

mm

0,6 mm

40 mm

10 mm

quad-dot 45

45 mm

38 mm

10

mm

0,6 mm20

mm

40 mm

10 mm

disc-dot

Ø 3,5 mm PUR

1,3 x 2,8 mm Fbl

2 x 0,25 mm²

RGB: Ø 5 mm,

4 x 0,25 mm²

2 x 0,25 mm²

RGB: 1,6 x 6,4 mm,

4 x 0,25 mm²

Accessories ► disc-dot / quad-dot 45


90104 nt 12/6 do Power supply 12 V 6 W, IP 20 for indoor use, installation in flush-mount boxes for max of 24 spots 50 x 40,8 x 21,5 mm


91320

91321

91322

91323

91324

91500

easy RGB II funk

easy RGB II DMX

easy RGB II DALI

easy RGB II KNX

easy RGB II e

fb-funk


RGB controller as above, but for DMX contr.

RGB controller as above, but for DALI contr.

RGB controller as above, but for KNX/EIB contr.

Expansion module for 34 more spots

Radio controller for easy RGB II radio ▪

-

200 x 120 x 80 mm

200 x 120 x 80 mm

200 x 120 x 80 mm

-

110 x 70 x 20 mm


dot-spot48

Acc

ent

light

poi

nts

frog-dot, accent light points 14 mm, with lense, 0,25 W / 0,5 W

12 VDC

▪ 14 mm accent light point, installation depth only 10 mm with mounting clip▪ with round design▪ microbe-proof PUR connecting cable diameter 3,4 mm, molded water-tight with spot, for exterior installation▪ extremely thin ribbon cable, for mounting in floor, wall and panelling▪ long life > 50,000 hrs, excellent luminosity, resistant to vibration▪ salt and chlorinated water resistant stainless steel 316 L housing▪ operable temperature range - 25°C up to + 45°C▪ small, elegant design, inconspicuous in the daytime, dazzle-free and fascinating lighting effects at night

18 mm

0,6 mm

25 mm

4 mm

10 mm

14 mm

20 mm

10 mm

V4A316 L


frog-dot 0,25 W

50600.XX.XX frog-dot V4A/316L 0,25 W 12 V DC with lens



XXXX.02.XX blue, 470 nm 2,8 lm XXXX.XX.02 10 m PUR

XXXX.03.XX green, 528 nm 11 lm XXXX.XX.11 7 m Fbl



XXXX.99.XX RGB 6 lm


Frog-dot super bright 0,5 W ▪ 50605.XX.XX frog-dot V4A/316L 0,5 W 12 V DC with lens



XXXX.11.XX neutral white, 4000 K 35 lm 80 XXXX.XX.02 10 m PUR

XXXX.01.XX cool white, 6000 K 39 lm 80 XXXX.XX.11 7 m Fbl

Accessories at page : 45

Ø 3,5 mm PUR

1,3 x 2,8 mm Fbl

2 x 0,25 mm²

RGB: Ø 5 mm,

4 x 0,25 mm²

2 x 0,25 mm²

RGB: 1,6 x 6,4 mm,

4 x 0,25 mm²

1 ... 24 Spots

N / L220 - 240 V AC50 / 60 Hz

-+

12 V DC


49

Made in Germany

starlight-crystal 12 Vstarlight-crystal 12 V, with Swarovski crystal

25

mm

18 mm

0,6

mm

25 mm

14 mm

15 mm

10 mm

20 mm

10 mm

1 ... 24 Spots

N / L220 - 240 V AC50 / 60 Hz

-+

12 V DC

▪ accent lighting with Swarovski crystal, assembly depth on 10 mm with mounting clip▪ fascinating star shaped lighting effect; ideal for combining with fibre optic sets▪ connecting cable moulded water-tight with spot, for interior and exterior installation,▪ long life > 50,000 hrs, excellent luminosity, resistant to vibration▪ salt and chlorinated water resistant stainless steel 316 L housing▪ operable temperature range - 25°C up to + 45°C

Acc

ent

light

poi

nts

V4A316 L

Art.-No. Model Design

starlight-crystal

50905.XX.XX stl V4A/316L 12 V DC with lens

Art.-No. Watt CRI Art.-No.

XXXX.00.XX warm white, 2800 K 0,5 W 35 lm 80 XXXX.XX.01 5 m PUR

XXXX.01.XX cool white, 6000 K 0,5 W 39 lm 80 XXXX.XX.02 10 m PUR

XXXX.02.XX blue, 470 nm 0,25 W 2,8 lm XXXX.XX.11 7 m Fbl

XXXX.03.XX green, 528 nm 0,25 W 11 lm

XXXX.04.XX amber, 611 nm 0,25 W 5 lm

XXXX.05.XX red, 625 nm 0,25 W 5 lm

XXXX.99.XX RGB 0,25 W 6 lm

Ø 3,5 mm PUR

1,3 x 2,8 mm Fbl

2 x 0,25 mm² RGB: Ø 5 mm, 4 x 0,25 mm²

2 x 0,25 mm²RGB: 1,6 x 6,4 mm, 4 x 0,25 mm²

Accessories ► starlight-crystal


90104 nt 12/6 do Power supply 12 V 6 W, IP 20 for indoor use, installation in fl ush-mount boxes for a maximum of 24 spots (0,25 W) / 12 spots (0,5 W) 50 x 40,8 x 21,5 mm

90105 nt 12/6 od setPower supply 12 V 6 W, IP 65 for outdoor use, with water protected junction box, for a maximum of 24 spots (0,25 W) / 12 spots (0,5 W) 94 x 94 x 57 mm

91320

91321

91322

91323

91324

91500

easy RGB II funk

easy RGB II DMX

easy RGB II DALI

easy RGB II KNX

easy RGB II e

fb-funk


RGB controller as above, but for DMX contr. RGB

controller as above, but for DALI contr. RGB

controller as above, but for KNX/EIB contr.

Expansion module for 34 more spot

Radio controller for easy RGB II radi

-

200 x 120 x 80 mm

200 x 120 x 80 mm

200 x 120 x 80 mm

-

110 x 70 x 20 mm

additional accessories from page ► 98

dot-spot

dot-spot50

starlight fiber-optic, 3 W

100 mm 3 m

2 m

70 mm

▪ star canopy with 121 light dots of 1 mm diameter; for creating decorative star constellations; ideal in combination with starlight-crystal

▪ fibre optic system with LED projector 3 W and fibre optic bundle, 60 fibres 2 m length, 61 fibres 3 m length▪ 3 variants available

- single colour: fixed colour- RGB: for dynamic colour change with easy RGB control unit- spark: glitter effect thanks to light dots fading in and out at irregular intervals

▪ Set with LED projector, fibre optic bundle and power supply▪ long life > 50,000 hrs, excellent luminosity, resistant to vibration▪ operable temperature range projector - 25°C up to + 45°C

Star

ry S

ky

Art.-No. Watt

starlight fi ber-optic 12 V ▪ single color

51000.00 3 W 230 V AC warm white, 3000 K 210 lm 121 x 1 mm 5 m Schuko

51000.01 3 W 230 V AC cool white, 6500 K 360 lm 121 x 1 mm 5 m Schuko

starlight fi ber-optic RGB

51000.99 3 W easy RGB RGB 120 lm 121 x 1 mm 5 m

starlight fi ber-optic spark ▪ glitter effect

51100.01 1,5 W 230 V AC cool white, 6500 K 150 lm 121 x 1 mm 5 m Schuko

230 VAC


51


Accent light points

Acc

ent

light

poi

nts

dot-spot52

5 Colourgarden Sets

Col

ourg

arde

n lig

htin

g se

ts

▪ Garden lighting made in Germany

▪ Functional complete sets with all parts required for operation

▪ Sales promoting package, ideal for retail stores

▪ Promotionally effective shelf, available with product samples in operation

LED recessed spot 3 W, triple set

LED recessed spot 1 W, triple set

Accent light points outdoor, set of 5

LED garden spot, single set, triple setLED garden spot with color change, single Set, triple Set LED garden spot 230 V, single Set

Accent light points indoor, set of 5

Page 49 Page 50 Page 52Page 51

Page 53 Page 54 Page 55


53


ALU

Col

ourg

arde

n lig

htin

g se

ts

Colourgarden RGB complete set, 230 V / 12 V, 5 W

▪ compact LED luminaire with 5 W RGB illuminant▪ full set, with LED spotlight, 5 m cable with low voltage plug, 12 V power supply, IR remote control, stainless steel peg and

assembly bracket, triple distributor (only set of 3)▪ 16 fixed colours, 4 colour changing programmes and 4 dim levels selectable via IR remote control▪ unique design, aluminum body, anodised in silver colour, RGB LED illuminant changeable▪ excellent thermal management for a long LED life▪ operable temperature range - 25°C up to + 45°C

RGB triple set wiring diagram

12 V / 5 W

230 V 50 Hz12 V

5 m 5 m

5 m Power supplyTriple distributor

12 V

Single set

Triple set

50mm

70 mm

80 mm

60 mm

100 mm

250 mm

Ø 30 mm

Art.-No. Model Watt

colourgarden RGB-Spot ► set of 1

25001 cl RGB s1 alu/silver 5 W 12 V AC LED RGB ca. 120 lm 60° 5 m

colourgarden RGB-Spot ► set of 3

25003 cl RGB s3 alu/silver 5 W 12 V AC LED RGB ca. 120 lm 60° 5 m

Replacement illuminant 96000 lm RGB - 5 W 12 V AC LED RGB ca. 120 lm 60° -

dot-spot54

Col

ourg

arde

n lig

htin

g se

ts

Colourgarden LED spotlight complete set, 230 V, 4 W

50mm

70 mm

80 mm

60 mm

100 mm

250 mm

Ø 30 mm

▪ compact LED luminaire with 4 W for direct connection to 230 V line voltage

▪ full set, with LED spotlight, 5 m cable with shockproof plug, stainless steel peg and assembly bracket

▪ Unique design, aluminum body, anodised in silver colour

▪ excellent thermal management for a very long LED life


LED-Spot 230 V, 4 W Set ► wiring diagram

230 V 50 Hz

Safety contact socket5 m

230 V AC

mm80 m

Art.-No. Model Watt CRI

Colourgarden LED-Spot 230 V

25000 cl 230 V s1 alu/silver 4 W 230 V AC warm white, 3000 K 145 lm 80 45° 5 m

230 VAC

ALU


55

Colourgarden Minispot complete set, 230 V / 12 V, 3 W

▪ compact LED luminaire with 3 W

▪ full set, with LED spotlight, 5 m cable with low voltage plug, 12 V power supply, stainless steel peg, assembly bracket and

triple distributor (only set of 3)

▪ unique design, aluminum body, anodised in silver colour

▪ with THERMOPROTECT system for a long LED life


Single set

Triple set

50 mm

30mm

50mm

65 mm

250 mm

Ø 30 mm

38 mm

Minispot 12 V, 3 W ▪ triple set wiring diagram

12 V / 3 W

230 V 50 Hz12 V

5 m 5 m

5 m

5 m

Power supplyTriple distributor

12 V


Colo

urga

rden

ligh

ting

sets


Colourgarden Minispot ► set of 1

25101 clm s1 alu/silver 3 W 12 V AC/DC warm white 2700 K 207 lm 80 40° 5 m

Colourgarden Minispot ► set of 3

25103 clm s3 alu/silver 3 W 12 V AC/DC warm white 2700 K 207 lm 80 40° 5 m

ALU

Colourgarden LED recessed spot 230 V / 12 V, 1 W, complete set of 3 spots

▪ LED recessed spot with 1 W power LED, direct operation with 12 V AC/DC, diffuse light emission, perfectly suitable as way and marking light, for installation in floors, walls and ceilings

▪ complete set, consisting of:

- 3 spots, with 5 m connection cable and low-voltage plug - 3 mounting sleeves 83 x Ø 44 mm- 1 x triple distributor- Power supply 12 V 6 W

▪ glare ring, round, in 316L stainless steel, anodized aluminum housing; operable temperature range - 25°C up to + 45°C

dot-spot56

Colourgarden LED Recessed spot 12v, 1w - Triple set wiring diagram

12 V / 1 W

5 m 5 m 5 m

Power supply

230 V 50 Hz

Triple distributor

12 V

Colo

urga

rden

ligh

ting

sets

38 mm

50

mm

2 mm

42 - 45 mm

60 mm

50 mm

32

mm

40

mm


Colourgarden LED recessed spot 1 W set of 325203 bm s3 V4A/Alu 3 x 1 W 12 V AC/DC warm white, 3000 K 88 lm 80 120° diffuse 5 m

ALU V4A316 L

Tel. 01372 888 455 | www.flairlight.co.ukTel. 01372 888 455 | www.flairlight.co.uk



57

Colourgarden LED recessed spot 230 V / 12 V, 3 W, complete set of 3 spots

Colourgarden LED recessed spot 12 V, 3 W ▪ triple set wiring diagram

12 V / 3 W

230 V 50 Hz

5 m 5 m 5 m

12 V

Power supplyTriple distributor

12 V


Colo

rgar

den

light

ing

sets

38 mm

50

mm

2 mm

42 - 45 mm

60 mm

50 mm

32

mm

40

mm

▪ LED recessed spot with 3 W power LED, direct operation with 12 V AC/DC, beam angle 40°, ideal for illuminating plants and architecture or as wall or floor sidelight; installation in floors, walls and ceilings

▪ complete set, consisting of:- 3 spots, with 5 m connection cable and low-voltage plug - 3 mounting sleeves 83 x Ø 44 mm- 1 x triple distributor- 1 power supply 12 V 20 W

▪ Glare ring, round, in 316L stainless steel, anodized aluminum housing; operable temperature range - 25°C up to + 45°C


Colourgarden LED recessed spot 3 W set of 325303 bmd s3 V4A/Alu 3 x 3 W 12 V AC/DC warm white, 3000 K 207 lm 80 40° 5 m

ALU V4A316 L

Colourgarden set of 5 accent light points 230 V / 12 V, 0,25 W for outdoor use

Colo

urga

rden

ligh

ting

sets

dot-spot58

▪ 14 mm accent light points, installation depth only 10 mm with mounting clamp; for accentuating terraces, ways, staircases, ponds and many more

▪ microbe-resistant PUR connection cable diameter 3.4 mm, directly grouted with the spot, waterproof, for outdoor installation

▪ complete set, consisting of 5 accent light points, with outdoor power supply

▪ long service life > 50,000 h, insensitive to vibration

▪ chlorine and brine-resistant 316L stainless steel housing

▪ operable temperature range from - 25°C to + 45°C

▪ small, elegant design, unobtrusive during the day, fascinating and glare-free light effect in the evening

18 mm

0,6 mm

25 mm

14 mm

10

mm

20 mm

10 mm

Art.-No. Model Watt CRI Design

Colourgarden set of accent light points for outdoor use 25405 md s5 od V4A 0,25 W 12 V AC/DC warm white, 3000 K 1 14 lm 80 120° diffuse 5 m

Accent light point set of 5 wiring diagram outdoor

12 V

N / L220 - 240 V AC

50 / 60 Hz-+

12 V DC

5 m5 m5 m5 m5 m

V4A316 L

1 Possible colour deviation from the standard products


Colo

urga

rden

ligh

ting

sets

59

Colorgarden set of 5 accent light points 230 V / 12 V, 0,25 W for indoor use

▪ 14 mm accent light points, installation depth only 10 mm with mounting clamp; for accentuating parquet/laminate floors or tiled surfaces in the bathroom, shower, hallway, kitchen and living area

▪ extremely thin twin strand 1.4 mm x 2.6 mm, for indoor installation in floors, walls and claddings

▪ complete set, consisting of 5 accent light points, with indoor power supply for installation in flush-mount boxes

▪ long service life > 50,000 h, insensitive to vibration

▪ chlorine and brine-resistant 316L stainless steel housing

▪ operable temperature range from - 25°C to + 45°C

▪ small, elegant design, unobtrusive during the day, glare-free and fascinating light effect in the evening

18 mm

0,6 mm

25 mm

14 mm

10

mm

20 mm

10 mm


Accent light point set of 5 wiring diagram indoor

12 V

7 m7 m

N / L220 - 240 V AC

50 / 60 Hz-+

12 V DC

Standard flush-mount/surface mount box

Art.-No. Model Watt CRI Design

Colourgarden set of accent light points for indoor use 25415 md s5 id V4A 0,25 W 12 V AC/DC warm white, 3000 K 1 14 lm 80 120° diffuse 7 m

V4A316 L

1 Possible colour deviation from the standard products

LED Linear Lighting, general information 6LE

D L

inea

r Lig

htin

g

dot-spot60

Slimlux linear lighting support a variety of design options in interior and exterior applications.

dot-spot custom manufactures all linear lighting to suit your dimensional specifi cations upon request. The LED stripes are perfectly matched to the specific profiles, this ensures perfectly accentuated lighting for any installation scenario. The linear lighting shown here are just a small selection from the huge variety of slimlux linear lighting design options. Two technologies are used for LED light strips:

Resistor

1. dot-spot standard LED stripes with series resistors

Fixed-value series resistors are used for current limitation. Changes in temperature or operating voltage will not be compensated. Therefore, with longer distances, the bright-ness can be reduced at the end of the stripe. Furthermore, depending from the application, these stripes have a shorter service life than LED stripes with driver electron-ics. The service life of standard LED stripes by dot-spot is approx. 20,000 – 50,000 hours. dot-spot standard LED stripes should only be used for applications with shorter daily duty cycle, e.g. in the private segment.

Driver

2. dot-spot premium LED stripes with driver electronics

These LED stripes are equipped with an integrated current limiter that always adjusts the current fl owing through the LED to the optimum value in case of voltage and temper-ature changes. With that, a high service life (> 50,000 h) and a homogenous illumination pattern is achieved.

dot-spot Premium LED stripes exclusively use LEDs from known brands with a very fine selection. dot-spot Premium LED stripes should always be used when a high light qual-ity and a long service life are required, e.g. in the commercial sector where duty cycles are rather extended.


ECB Euro Tower with LED cornice lighting slimlux 18

LED Linear Lighting, general information

LED

Lin

ear L

ight

ing

dot-spot62

LED light strips with visible light points are for funfairs! Homogeneously glowing linear lightings stand for light design!

LED light strips with visible light points are at best suitable for indirect lighting. Also in this case the LED strips should be laid in LED profi les in order to protect the from damage and for easier cleaning.

dot-spot provides you with ready-made LED linear lighting. Depending on the application, you can choose between 2 different LED strip quality standards. It is not possible to achieve homeogenour illumination pattern with the single LED profiles using any LED strip. Please not the inofrmation on the respective profiles

2. Standard LED strip, low-cost LED‘s, low-cost technology

▪ simple current control via series resistors

▪ LED strip and LED‘s from the Asian brand

manufacturer

▪ Use: In the private sector or commercial sector

with average and low daily operating duration

Note: Line lights made of aluminum are not suitable for floor installation and installation in concrete elements in outdoor areas. In this case, please use the slimlux 19 VA or slimlux 18/30 od profiles.

The power indicated is the rated output of the LED strip. The actual power consumption may be lower.

1. Premium LED strip, best technology, best durability

▪ with integrated driver electronics for a long life

▪ high-quality LED‘s from brand manufacturers

▪ German or European production or production

according to quality standards respectively

▪ Use: In the commercial sector, with high daily operating

duration, outdoor applications

▪ high continuity due to the best selection of LED‘s,

high CRI value

Choose LED strips from 2 quality/price ranges


LED Linear Lighting, general information

LED

Lin

ear L

ight

ing


On the following pages you will find a small selection of LED Strips with matching profiles.The aluminium profiles are anodised and equipped with a UV-resistant and breakproof polycarbonate cover.

Further profi les and LED strips are available upon request, e.g.:

▪ LED strips with higher luminance▪ LED strips with adjustable light colour▪ RGB LED strips with chaser function▪ RGBW light strips with separate white light ▪ and many more...

Optionally, linear lighting with plug connector

Linear lighing with plug connector Feed line 5 m

LN

230 V 50 Hz

24 V

Additional linear lightings

Power supplystandard for slimlux 10 and 15

Linear lighting with cable connection

Linear lighing Standard connector, feed line 5 m

LN

230 V 50 Hz

24 V

Additional linear lightings

Power supply

RGB wiring diagram with fc funk ▪

+BGR

-+

fb funk

power supplyLinear lighting

24 V DC

fc funk (DMX-, DALI-, KNX-Controller)

in

out

.

.

.

63

LED Linear Lighting, Standard packing

LED

Lin

ear L

ight

ing

dot-spot64

Packed LED line lights

All slimlux light lines can be shipped ready for connection and packed to measure. With standard packing the light lines are cut to the required length and furnished with end caps, connection cable and mounting material if necesassary.

Packed slimlux LED line lights IP 20

Allowance at the beginning + n x cutting dimension + allowance at the end = Result

15 mm + 18 x 75 mm = 1350 mm + 15 mm = 1380 mm profile length

Depending on the LED stripe being used there are specific optimum LED profile lengths. A good illumination reaching to the ends of the stripe is achieved if the cutting dimensions are being adhered to. In case the profile length differs from the recommended dimensions the perfect illuminaion up the ends may not be guaranteed anymore.

Formula for calculating the profi le length (example):

Packed slimlux LED line lights IP 67

Ordering ready-made light bars:

The item numbers of light bars are composed as follows:

A = length-dependent item number. In case of multiple light bars of the same type, specify the total length of all parts.

B = Quantity-dependent item number. Specify the number of light bars here.

Example: Ordering 1 light bar 1.20 m and one light bar 1.60 m of the same type as follows:

2,80 m Item number A

2 Stck. Item number B


LED

Lin

ear L

ight

ing


65

In addition to the standard packing also individual packings can be implemented. The following features can be selected/modifi ed:

D

A

C

BY

C

B

D

mm

W W W

X X

ZZZ

X

lateral outer lateral inner top

mm mm mm

°

mm

°

mm

°

mm

B ► 5 m open end

D ► 0.15 m with connector plug IP 20 inside, IP 67 outside + connection cable 5 m with socket

E ► two-sided connection, left: 0.15 m with connector plug, right 0.15 mm connection cable with socket, each IP 20 inside, IP 67 outside

.....

4. Please, specify special requests here

1. Cable outlet

3. Angle cut

2. Connection cable variants

LED Linear Lighting, individual packing

dot-spot66

LED Linear Lighting slimlux 3,5

LED

Lic

htlin

ien ▪ L

ED L

inea

r Lig

htin

g ▪ L

igne

s lu

min

euse

s LE

D

ALU

▪ elegant light line, only 3.5 mm in width, 4.8 W/m

▪ stylish light accents for bathrooms, kitchens and floors

▪ for tile installation in the floor and the wall, also in wet areas

▪ production length max. 3 m, connection cable 7 m twin strand

▪ made to measure, with mitre cut upon request

Art.-No. Model Watt

Profile65003.XX.XX sl 3,5 ALU 4,8 W/m 12 V DC 7 m zl

96501 End with mitre cut

Art.-No. CRI

Lighting colourXXXX.00.47 warm white, 2700 K 14 lm 80 16 mm 5/5 mm

XXXX.01.47 cool white, 5000 K 16 lm 80 16 mm 5/5 mm

XXXX.02.47 blue, 470 nm 2,8 lm - 16 mm 5/5 mm

XXXX.04.47 amber, 611 nm 5 lm - 16 mm 5/5 mm

XXXX.05.47 red, 625 nm 5 lm - 16 mm 5/5 mm

9,7 mm

3,5 mm

12

,6 m

m

max. 3 m

Perfect illumination: addition beginning + n x cut + addition end

1 Permanently elastic joint

2 Light conductor

3 Silicone profi le

4 Tile

5 Aluminium profi le

6 PU glue

7 Tile glue

8 F loor/wall

12

3

5

4

6 7

8

Accessories from page : 94

1,3 x 2,8 mm

2 x 0,25 mm²


15 mm

3,2 mm

10,8 mm

max. 3 m

9,6 mm

6 mm

67

LED

Lin

ear

Ligh

ting


LED Linear Lighting slimlux XS 10x15

▪ narrow line light for surface and integrated mounting, only 10 mm in width

▪ homogenous illumination pattern

▪ made to measure, with end caps, max. length 3 m , further LED strips upon request


Profile

62100.20.XX sl XS 10x15 IP 20 ALU 24 V DC with diffuse cover

62100.67.XX sl XS 10x15 IP 67 ALU 24 V DC with diffuse grouting 1

Art.-No. Model CRI Watt

LED strip XXXXX.XX.01 Standard ww, 2700 K ca. 800 lm/m >80 9,6 W/m 50 mm 10 mm

XXXXX.XX.03 Standard nw, 4000 K ca. 820 lm/m >80 9,6 W/m 50 mm 10 mm

XXXXX.XX.06 Standard kw, 6500 K ca. 840 lm/m >80 9,6 W/m 50 mm 10 mm

1 The grouting increases the lighting colour value


A

Art.-No. Connection and end caps

Connection and end caps

62101.455 m5 m5 m

Metal end caps and standard packing, open cable

62101.410,15 m0.15 m0,15 m

Metal end caps and standard packing, plug on one side

62101.420,15 m0.15 m0,15 m

Metal end caps and standard packing, plug/socket

Accessories ► slimlux XS

Art.-No. Model Description Unit

95062 sl XS ms Installation profi le for sl

1 m


B

ALUIP 20IP 67

Ø 4 mm

32 mm

Ø 9 mm

2 x 0,25 mm²

dot-spot68

LED Linear Lighting slimlux 7/7 K

LED

Lin

ear

Ligh

ting

▪ flat line light for surface and integrated mounting (sl 7 K), only 7 mm in height

▪ no homogenous illumination pattern

▪ made to measure, with end caps, max. length 3 m

▪ further versions upon request

ALU


Profile

62070.20.XX sl 7 IP 20 ALU 24 V DC with diffuse cover

62070.67.XX sl 7 IP 67 ALU 24 V DC with diffuse grouting 1

62071.20.XX sl 7 K IP 20 ALU 24 V DC with diffuse cover

62071.67.XX sl 7 K IP 67 ALU 24 V DC with diffuse grouting 1


LED stripXXXXX.XX.01 Standard warm white, 2700 K ca. 1050 lm/m >80 9,6 W/m 50 mm 10 mm

XXXXX.XX.03 Standard neutral white, 4000 K ca. 1200 lm/m >80 9,6 W/m 50 mm 10 mm

XXXXX.XX.08 Standard RGB ca. 283 lm/m - 14,4 W/m 100 mm 15 mm

XXXXX.XX.09 Standard RGBW, 3000 K 2 ca. 1120 lm/m - 19,2 W/m 100 mm 15 mm


1 mm

17,5 mm

7 mm

max. 3 m

12,2 mm

1 mm

24,5 mm

7 mm5,5 mm

max. 3 m

17,5 mm

12,2 mm

A

Accessories ► slimlux 7


95001 sl 7 mc Mounting clip for sl 7 profi le 1 piece




62072.455 m5 m5 m

Plastic end caps and standard packing, open cable

62072.410,15 m0.15 m0,15 m

Plastic end caps and standard packing, plug on one side

62072.420,15 m0,15 m0,15 m

Plastic end caps and standard packing ,with plug/ socket

B


IP 20IP 67

Ø 4 mm

32 mm

Ø 9 mm

2 x 0,25 mm²RGB 4 x 0,25 mmRGBW 6 x 0,25 mm²

2 Available open only with 5 m connection


69

LED

Lin

ear

Ligh

ting


LED Linear Lighting slimlux 19 F

▪ flat line light for surface mounting, width 18.4 mm, height 13 mm

▪ with standard LED stripe, no homogenous illumination pattern



ALU


Profile

62191.20.XX sl 19 F IP 20 ALU 24 V DC with diffuse cover

62191.21.XX sl 19 F IP 20 ALU 24 V DC with transparent cover

62191.67.XX sl 19 F IP 67 ALU 24 V DC with transparent grouting 1


LED strip

XXXXX.XX.01 Standard warm white 2700 K ca. 1050 lm/m >80 9,6 W/m 50 mm 10 mm

XXXXX.XX.03 Standard neutral white 4000 K ca. 1200 lm/m >80 9,6 W/m 50 mm 10 mm

XXXXX.XX.08 Standard RGB ca. 283 lm/m - 14,4 W/m 100 mm 15 mm

XXXXX.XX.09 Standard RGBW, 3000 K 2 ca. 1120 lm/m - 19,2 W/m 100 mm 15 mm

max. 5 m

13,4 mm

15 mm

18,4 mm

8 mm

13 mm

A

180°Accessories ► slimlux 19 F


95015 sl 19 hk 1 Mounting clip for sl 19 1 pair

95016 sl 19 hk 2 Mounting clip 45° for sl 19 1 pair

95017 sl 19 hk 3 Pivoting mounting clip for sl 19 1 pair

95018 sl 19 mv Mounting clip for sl 19 1 piece



Art.-No. End caps Art.-No.

End caps Connection

62191A.50.XX Plastics XXXXX.XX.45 5 m

62191A.51.XX Metal XXXXX.XX.41 0,15 m

62191A.52.XX Metal with fixing lugs XXXXX.XX.42 0,15 m

B

IP 20IP 67

Ø 4 mm

32 mm

Ø 9 mm

2 x 0,25 mm²RGB 4 x 0,25 mmRGBW 6 x 0,25 mm²

1 The grouting increases the lighting colour value 2 Available open only with 5 m connection

dot-spot70

LED Linear Lighting slimlux 19

LED

Lin

ear

Ligh

ting

▪ Line light for surface mounting, width 18.4 mm, height 19 mm

▪ with standard LED stripe, homogenous illumination pattern



ALU


Profile

62190.20.XX sl 19 IP 20 ALU 24 V DC with diffuse cover

62190.671.XX sl 19 IP 64 TV ALU 24 V DC partially grouted, with diffuse cover

62190.67.XX sl 19 IP 67 ALU 24 V DC with diffuse full grouting 1

max. 5 m

13,4 mm

15 mm

18,4 mm

8 mm

19 mm

180°

AArt.-No. Model CRI Watt

LED stripXXXXX.XX.21 Premium warm white 2700 K ca. 600 lm/m >80 9,6 W/m 100 mm 10/10 mm

XXXXX.XX.23 Premium neutral white 4000 K ca. 650 lm/m >80 9,6 W/m 100 mm 10/10 mm

XXXXX.XX.25 Premium cool white 6300 K ca. 670 lm/m >80 9,6 W/m 100 mm 10/10 mm

XXXXX.XX.22 Premium warm white 2700 K ca. 1410 lm/m >80 19,2 W/m 75 mm 10/10 mm



XXXXX.XX.28 Premium RGB ca. 445 lm/m - 16,6 W/m 100 mm 15/15 mm

XXXXX.XX.01 Standard warm white 2700 K ca. 1050 lm/m >80 9,6 W/m 100 mm 10/10 mm

XXXXX.XX.04 Standard neutral white 4000 K ca. 1200 lm/m >80 9,6 W/m 100 mm 10/10 mm



XXXXX.XX.12 Standard blue 470 nm - 9,6 W/m 50 mm 10/10 mm

XXXXX.XX.13 Standard green 527 nm - 9,6 W/m 50 mm 10/10 mm

XXXXX.XX.14 Standard amber 590 nm - 9,6 W/m 50 mm 10/10 mm

XXXXX.XX.15 Standard red 625 nm - 9,6 W/m 50 mm 10/10 mm

XXXXX.XX.09 Standard RGBW, 3000 K 2 ca. 1120 lm/m - 19,2 W/m 100 mm 15/15 mm



End caps Connection

62190A.50.XX Plastics XXXXX.XX.45 5 m

62190A.51.XX Metal XXXXX.XX.41 0,15 m

62190A.52.XX Metal with fixing lugs XXXXX.XX.42 0,15 m

B

IP 20IP 64IP 67

Ø 4 mm

32 mm

Ø 9 mm

2 x 0,25 mm²RGB 4 x 0,25 mm



71

LED

Lin

ear

Ligh

ting


Accessories ► slimlux 19


95015 sl 19 hk 1 Mounting clip for sl 19 1 pair

95016 sl 19 hk 2 Mounting clip 45° for sl 19 1 pair

95017 sl 19 hk 3 Pivoting mounting clip for sl 19 1 pair

95041 sl 19 hk 4 Mounting for sl 19, extra strong 1 pair

95018 sl 19 mv Connector clip for sl 19 1 piece


LED Linear Lighting slimlux 19

dot-spot72

LED Linear Lighting slimlux 19 VA, 1.4404 stainless steel 316L - NEW

LED

Lin

ear

Ligh

ting

▪ Line light for surface mounting, width 17.4mm, Height 19.7mm

▪

▪



Fully potted clear or opaque , for outdoor use

For installation in the (ground ) floor , natural stone, concrete parts and in swimming pools


Profile

62195.67.XX sl 19 VA 67 d ALU 24 V DC with diffuse full grouting 1

62195.672.XX sl 19 VA 67 k ALU 24 V DC with transparent full grouting 1

max. 3 m

13,4 mm

17,4 mm

19,7 mm

16,2 mm

A




















End caps Connection

62190A.51.XX Stainless steel XXXXX.XX.45 5 m

XXXXX.XX.41 0,15 m

XXXXX.XX.42 0,15 m

B

Ø 4 mm

32 mm

Ø 9 mm

2 x 0,25 mm²RGB 4 x 0,25 mm


V4A316 L



73

LED

Lin

ear

Ligh

ting


Accessories ► slimlux 19 VA


95042 sl 19 VA hk 1 Mounting clip for sl 19 VA 1 pair


LED Linear Lighting slimlux 19 VA, stainless steel

dot-spot74

LED

Lin

ear

Ligh

ting

max. 5 m

18,4 mm

30 mm13,4 mm

15 mm

LED Linear Lighting slimlux 19 H

▪ Line light for surface mounting, invisible mounting, width 18.4 mm, height 30 mm




ALU


Profile

62192.20.XX sl 19 H 20 ALU 24 V DC with diffuse cover

62192.671.XX sl 19 H 64 TV ALU 24 V DC partially grouted, with diffuse cover

62192.67.XX sl 19 H 67 ALU 24 V DC with diffuse full grouting 1





















62192A.455 m5 m5 m


62192A.410,15 m0.15 m0,15 m


62192A.420,15 m0.15 m0,15 m


B

IP 20IP 64IP 67

Ø 4 mm

32 mm

Ø 9 mm

2 x 0,25 mm²RGB 4 x 0,25 mm



75


LED

Lin

ear

Ligh

ting

LED Linear Lighting slimlux 19 H

Accessories ► slimlux 19 H


95019 sl 19 H bp Installation profi le for sl 19 1 m

95021 sl 19 H hs Mounting bracket, 5 cm, with screws 1 pair

95022 sl 19 dbf Suspension for ceiling mount 1 pair


dot-spot76

LED Linear Lighting slimlux 19 K

LED

Lin

ear

Ligh

ting

▪ narrow line light for surface and integrated mounting, width with collar 35.2 mm, height 25 mm




ALU


Profile

62193.20.XX sl 19 K 20 ALU 24 V DC with diffuse cover

62193.671.XX sl 19 K 64 TV ALU 24 V DC partially grouted, with diffuse cover

62193.67.XX sl 19 K 67 ALU 24 V DC with diffuse full grouting 1

18,5 mm

max. 5 m

25 mm

15,2 mm

35,2 mm22,3 mm


















A


Zubehör ▪ accessories ▪ accessoires ► slimlux 19 K


95024 sl 19 K mh Mounting clamp for dry wall construction mounting 1 piece



62193A.455 m5 m5 m

Metal end caps, with collar and standard packing, open cable

62193A.410,15 m0.15 m0,15 m

Metal end caps, with collar and standard packing, plug on one side

62193A.420,15 m0.15 m0,15 m

Metal end caps, with collar and standard packing, plug/socket

B

IP 20IP 64IP 67


Ø 4 mm

32 mm

Ø 9 mm

2 x 0,25 mm²RGB 4 x 0,25 mm




77

LED

Lin

ear

Ligh

ting


LED Linear Lighting slimlux 19 180°

▪ line light with 180° light emission, with invisible mounting clips, width 19 mm, height 20 mm

▪ homogenous illumination pattern (only with 180° diffuser)



ALU


Profile

69194.20.XX sl 19 180H 20 ALU 24 V DC with diffuse 180° cover

69194.21.XX sl 19 180F 20 ALU 24 V DC with transparent cover, fl at, IP 20

69194.67.XX sl 19 180F 67 ALU 24 V DC with transparent full grouting, fl at, IP 67 1


LED strip XXXXX.XX.21 Premium warm white 2700 K ca. 600 lm/m >80 9,6 W/m 100 mm 10/10 mm












A

16 mm

19 mm

14 mm8,6 mm

10,2 mm

12 mm

max. 5 m

IP 20IP 67




69195.455 m5 m5 m


69195.410,15 m0.15 m0,15 m


69195.420,15 m0.15 m0,15 m


B

Accessories at page ► 72

Ø 4 mm

32 mm

Ø 9 mm

2 x 0,25 mm²RGB 4 x 0,25 mm


dot-spot78

LED

Lin

ear

Ligh

ting

Accessories ► slimlux 180°


95040 sl 19 180° mh Stainless steel mounting clip 1 pair

95032 sl 180° hcp Plastic mounting clip 1 pair

95033 sl 180° eh Plastic mounting clip, for corner installation 1 pair

95034 sl 180° smh Super magnet support 1 piece

95035 sl 180° pv Profi le connector 1 piece

95036 sl 180° ev Corner connector 1 piece

95022 sl 19 dbf Suspension for ceiling mounting 1 pair


LED Linear Lighting slimlux 19 180° complete light

▪ line light with 180° light emission, homogenous illumination pattern, width 19 mm, height 20 mm

▪ ready-made luminaire e.g. as a replacement of fluorescent lights, lighting color 2700 K

▪ complete with external power supply and mounting clips, connection cable 5 m

ALU

Art.-No. Model Length Watt

slimlux 19 180° Complete light

69194.60 sl 19 180° L60 ALU 60 cm 11.2 W 230 V 1200 lm 5 m

69194.120 sl 19 180° L120 ALU 120 cm 23,5 W 230 V 2400 lm 5 m

69194.150 sl 19 180° L150 ALU 150 cm 29,4 W 230 V 3000 lm 5 m

69194.200 sl 19 180° L200 ALU 200 cm 39,2 W 230 V 4000 lm 5 m

LED Linear Lighting slimlux 19 180°

230 VAC


79

LED

Lin

ear

Ligh

ting


LED Linear Lighting slimlux eck 45°

▪ line light for corner installation, width 18.81 mm x height 18.81 mm

▪ almost homogenous illumination pattern with diffuse cover



ALU


Profile

62450.20.XX sl 45 eck 20 ALU 24 V DC with diffuse cover, IP 20

62450.21.XX sl 45 eck 20 ALU 24 V DC with transparent cover, IP 20

62450.67.XX sl 45 eck 67 ALU 24 V DC with transparent full grouting IP 67 1

max. 5 m

15 mm

23,71 mm

8 m

m16

,66

mm

18,81 mm














Accessories ► slimlux eck 45°


95071 sl eck 45 mc Mounting clip for sl 45 eck 1 pair





62451.455 m5 m5 m


62451.410,15 m0.15 m0,15 m


62451.420,15 m0.15 m0,15 m


B

IP 20IP 67

Ø 4 mm

32 mm

Ø 9 mm

2 x 0,25 mm²RGB 4 x 0,25 mm


dot-spot80

LED strip slimlux 30x30

LED

Lin

ear

Ligh

ting

▪ elegant line light, 30 x 30 mm for general illumination


▪ high light output thanks to lateral reflectors

▪ with hidden mounting clips



ALU

30 mm23,8 mm

30 mm

27,6 mm

10,2 mm

max. 3 m


Profile

62300.XX sl 30x30 ALU 24 V DC with diffuse cover, IP 20












62301.455 m5 m5 m


62301.410,15 m0.15 m0,15 m


62301.420,15 m0.15 m0,15 m


B

Ø 4 mm

32 mm

Ø 9 mm

2 x 0,25 mm²RGB 4 x 0,25 mm

Accessories ► slimlux eck 45°


95040 sl 19 180 mh Mounting clip for sl 30 1 pair

95035 sl 180° pv Profi le connector 1 piece

95036 sl 180° ev Corner connector 1 piece

95022 sl 19 dbf Suspension for ceiling mounting 1 pair


Available open only with 5 m connection


81

LED

Lin

ear

Ligh

ting


LED strip slimlux 30x30 complete light

ALU

▪ elegant light bar, 30 x 30 mm, homogenous illumination pattern

▪ ready-made luminaire e.g. as a replacement of fluorescent lights, lighting color 2700 K

▪ complete with external power supply and mounting clips, connection cable 5 m

Art.-No. Model Length Watt

slimlux 30x30 ▪ Complete light

62300.60 sl 30 L60 ALU 60 cm 11.2 W 24 V DC 1200 lm 5 m

62300.120 sl 30 L120 ALU 120 cm 23,5 W 24 V DC 2400 lm 5 m



230 VAC

dot-spot82

LED strip slimlux 10 flex 6 W/m

LED

Lin

ear

Ligh

ting

▪ flexible line light, 10 x 18.5 mm, vertically flexible (curved), minimum bending radius only 15 cm

▪ homogenous illumination pattern, absolutely straight light output surface

▪ water-resistant , protected against UV radiation, wear and chemicals

▪ cable outlet at the back or laterally possible thanks to seamless, widely shadow-free arrangement

▪ available in fixed length or made to measure

Standard length

Made to measure :Standardized size 84 mm x 1-71 units, + 20 mm for connection = possible lengths (min. 104 mm, max. 5,984 mm)

Attention: 25 % surcharge in case of lengths < 1 m

18,5 mm

10 mm

LED stripe

bending direction

flexible full grouting

R150

10 mm

bending radius

Ø 4 mm

32 mm

Ø 9 mm

2 x 0,25 mm²

Art.-No. Model Watt Length

Fixed length 64106.09.XX.XX sl 10 fl ex 6 6 W/m 24 V DC 950 mm

64106.24.XX.XX sl 10 fl ex 6 6 W/m 24 V DC 2456 mm

64106.39.XX.XX sl 10 fl ex 6 6 W/m 24 V DC 3968 mm


Lighting color Connection XXXXX.30.XX warm white 2600 K 547 lm/m >80 XXXXX.XX.45 3 m

XXXXX.31.XX warm white 3400 K 547 lm/m >80 XXXXX.XX.41 0,15 m

XXXXX.32.XX neutral white 4150 K 547 lm/m >80 XXXXX.XX.42 0,15 m

XXXXX.33.XX cool white 7100 K 547 lm/m >80

XXXXX.34.XX red 624 nm 213 lm/m -

XXXXX.35.XX green 525 nm 419 lm/m -

XXXXX.36.XX blue 470 nm 92 lm/m -

XXXXX.37.XX amber 593 nm 227 lm/m -

Item no. A x total length of all light bars

Art.-No. CRI

Packed length 64106.30 warm white 2600 K 547 lm/m >80 84 mm 10/10 mm

64106.31 warm white 3400 K 547 lm/m >80 84 mm 10/10 mm

64106.32 neutral white 4150 K 547 lm/m >80 84 mm 10/10 mm

64106.33 cool white 7100 K 547 lm/m >80 84 mm 10/10 mm

64106.34 red 624 nm 213 lm/m - 84 mm 10/10 mm

64106.35 green 525 nm 419 lm/m - 84 mm 10/10 mm

64106.36 blue 470 nm 92 lm/m - 84 mm 10/10 mm

64106.37 amber 593 nm 227 lm/m - 84 mm 10/10 mm

A

Accessories ► slimlux 10 flex 6 W/m


95200 Sl10 fl ex mp Installation profi le Aluminum, rigid, for sl 10 1 m

Item no. B x number of light bars

Art.-No.

Connection 64107.45 3 m

64107.41 0,15 m

64107.42 0,15 m

B

additional accessories from page ► 98



83

LED

Lin

ear

Ligh

ting








Standard length

Made to measure :Standardized size 60 mm x 1-124 units, + 20 mm for connection = possible lengths (min. 80 mm, max. 7460 mm)


R150

10 mm

bending radius


Fixed length64108.09.XX.XX sl 10 fl ex 8 8,3 W/m 24 V DC 980 mm

64108.24.XX.XX sl 10 fl ex 8 8,3 W/m 24 V DC 2420 mm

64108.39.XX.XX sl 10 fl ex 8 8,3 W/m 24 V DC 3980 mm


Lighting color ConnectionXXXXX.30.XX warm white 2600 K 770 lm/m >80 XXXXX.XX.45 3 m








18,5 mm

10 mm

LED stripe

bending direction


Ø 4 mm

32 mm

Ø 9 mm

2 x 0,25 mm²

Art.-No. CRI





64108.34 red 624 nm 300 lm/m - 60 mm 10/10 mm

64108.35 green 525 nm 590 lm/m - 60 mm 10/10 mm

64108.36 blue 470 nm 130 lm/m - 60 mm 10/10 mm

64108.37 amber 593 nm 320 lm/m - 60 mm 10/10 mm


A

Art.-No.

Connection

64109.45 3 m

64109.41 0,15 m

64109.42 0,15 m



95200 Sl10 fl ex mp Installation profi le Aluminum, rigid, for sl 10 fl ex 1 m

Item no. B x number of light bars B


dot-spot84


LED

Lin

ear L

ight

ing

Made to measure:Standardized size 90 mm x 1-55 units, + 20 mm for connection = possible lengths (min. 110 mm, max. 4970 mm)


R150

10 mm

bending radius


Fixed length 64110.10.XX.XX sl 10 fl ex 18 uni 17,9 W/m 24 V DC 1010 mm

64110.24.XX.XX sl 10 fl ex 18 uni 17,9 W/m 24 V DC 2450 mm

64110.39.XX.XX sl 10 fl ex 18 uni 17,9 W/m 24 V DC 3980 mm

64110.10.99.XX.XX sl 10 fl ex 18 RGB 16,6 w/m 24 V DC 1010 mm

64110.24.99.XX.XX sl 10 fl ex 18 RGB 16,6 W/m 24 V DC 2450 mm

64110.39.99.XX.XX sl 10 fl ex 18 RGB 16,6 W/m 24 V DC 3980 mm




XXXXX.33.XX cool white 7100 K 1716 lm/m >80 XXXXX.XX.42 0,15 m

RGB 594 lm/m -

18,5 mm

10 mm

LED stripe

bending direction



Art.-No. CRI




64110.99 RGB 594 lm/m - 90 mm 10/10 mm

A

Art.-No.


64111.41 0,15 m

64111.42 0,15 m



95200 Sl10 fl ex mp Installation profi le Aluminum, rigid, for sl 10 1 m



Ø 4 mm

32 mm

Ø 9 mm

2 x 0,25 mm²RGB 4 x 0,25 mm






Standard length


85


LED strip slimlux 13,5 flex 8 W/m B

▪ flexible line light, 13.5 x 13.5 mm, horizontally flexible (undulated), minimum bending radius only 20 cm





Standard length

LED

Lic

htlin

ien ▪ L

ED L

inea

r Lig

htin

g ▪ L

igne

s lu

min

euse

s LE

D


Fixed length 64135.09.XX.XX sl 13,5 fl ex 8 8,3 W/m 24 V DC 980 mm

64135.24.XX.XX sl 13,5 fl ex 8 8,3 W/m 24 V DC 2420 mm

64135.39.XX.XX sl 13,5 fl ex 8 8,3 W/m 24 V DC 3980 mm










Made to measure:Standardized size 60 mm x 1-124 units, + 20 mm for connection = possible lengths (min. 80 mm, max. 7460 mm)


Art.-No. CRI





64135.34 red 624 nm 300 lm/m - 60 mm 10/10 mm

64135.35 green 525 nm 590 lm/m - 60 mm 10/10 mm

64135.36 blue 470 nm 130 lm/m - 60 mm 10/10 mm

64135.37 amber 593 nm 320 lm/m - 60 mm 10/10 mm

Item no. A x total length of all light bars A

Accessories► slimlux 13,5 flex 8 W/m


95201 Sl 13,5 fl ex mp Installation profi le Aluminum, rigid, for sl 13,5 fl ex 1 m

Art.-No.

Connection64136.45 3 m

64136.41 0,15 m

64136.42 0,15 m


13,5 mm

13,5 mm

LED stripe

bending direction flexible full grouting

R200

13,5 mm

bending radius

Ø 4 mm

32 mm

Ø 9 mm

2 x 0,25 mm²


dot-spot86

LED strip slimlux 17,5 flex 18 W/m

LED

Lin

ear

Ligh

ting

▪ flexible line light, 17.5 x 17.5 mm, horizontally flexible (undulated), minimum bending radius only 20 cm





Standard length

R200

17,5 mm

bending radius

Made to measure :Standardized size 90 mm x 1-55 units, + 20 mm for connection = possible lengths (min. 110 mm, max. 4970 mm)



Fixed length64175.10.XX.XX sl 17,5 fl ex 18 uni 17,9 W/m 24 V DC 1010 mm

64175.24.XX.XX sl 17,5 fl ex 18 uni 17,9 W/m 24 V DC 2450 mm

64175.39.XX.XX sl 17,5 fl ex 18 uni 17,9 W/m 24 V DC 3980 mm

64175.10.99.XX.XX sl 17,5 fl ex 18 RGB 16,6 w/m 24 V DC 1010 mm

64175.24.99.XX.XX sl 17,5 fl ex 18 RGB 16,6 W/m 24 V DC 2450 mm

64175.39.99.XX.XX sl 17,5 fl ex 18 RGB 16,6 W/m 24 V DC 3980 mm


Lighting color ConnectionXXXXX.31.XX warm white 3400 K 1716 lm/m >80 XXXXX.XX.45 3 m


XXXXX.33.XX cool white 7100 K 1716 lm/m >80 XXXXX.XX.42 0,15 m

RGB 594 lm/m -

17,5 mm

17,5 mm

LED stripe

bending direction flexible full grouting

Art.-No. CRI




64175.99 RGB 594 lm/m - 90 mm 10/10 mm


A

Accessories ► slimlux 17,5 flex 18 W/m


95202 Sl 17,5 fl ex mp Installation profi le Aluminum, rigid, for sl 17,5 1 m


Art.-No.

Connection64176.45 3 m

64176.41 0,15 m

64176.42 0,15 m


Ø 4 mm

32 mm

Ø 9 mm

2 x 0,25 mm²RGB 4 x 0,25 mm



87

LED

Lin

ear

Ligh

ting


LED strip slimlux 18/30 od, standard length

▪ Line light, 18 x 35 mm or 30 x 35 mm for outdoor use

▪ robust design, waterproof, resistant to UV radiation and chemicals

▪ Outdoor installation in floors and facades, matching installation frames for any mounting situation available




Art.-No. Model Length

Fixed length63018.05.XX.XX.XX sl 18 PMMA / 316L 24 V DC 530 mm

63018.09.XX.XX.XX sl 18 PMMA / 316L 24 V DC 930 mm





63018.05.99.XX.XX.XX sl 18 RGB PMMA / 316L 24 V DC 530 mm






Stainless steel installation profi le ► sl 18/30 od


95101.5395101.9395101.193

W sl 18 530W sl 18 930W sl 18 1930

Wall installation profile ► sl 18 od, V4A Wall installation profile ► sl 18 od, V4A Wall installation profile ► sl 18 od, V4A

530 mm930 mm1930 mm

95102.5395102.9395102.193

B sl 18 530B sl 18 930B sl 18 1930

Floor installation profile ► sl 18 od, V4A Floor installation profile ► sl 18 od, V4A Floor installation profile ► sl 18 od, V4A

530 mm930 mm1930 mm

95111.5395111.9395111.193

W sl 30 530W sl 30 930W sl 30 1930

Wall installation profile ► sl 30 od, V4A Wall installation profile ► sl 30 od, V4A Wall installation profile ► sl 30 od, V4A

530 mm930 mm1930 mm

95112.5395112.9395112.193

B sl 30 530B sl 30 930B sl 30 1930

Floor installation profile ► sl 30 od, V4A Floor installation profile ► sl 30 od, V4A Floor installation profile ► sl 30 od, V4A

530 mm930 mm1930 mm

Additional accessories from page ► 98 Dimensional drawing on page ► 89

Art.-No. Watt CRI Art.-No. Art.-No. Option

Lighting color Connection Option

XXXXX.31.XX.XX ww 3000 K 420 lm/m 9,6 W/m >80 XXXXX.XX.45.XX 5 m XXXXX.XX.XX.00

XXXXX.32.XX.XX nw 4000 K 450 lm/m 9,6 W/m >80 XXXXX.XX.41.XX 0,15 m XXXXX.XX.XX.01

XXXXX.33.XX.XX cw 6800 K 480 lm/m 9,6 W/m >80 XXXXX.XX.42.XX 0,15 m

XXXXX.34.XX.XX r 624 nm 80 lm/m 7,4 W/m -

XXXXX.35.XX.XX g 525 nm 180 lm/m 7,4 W/m -

XXXXX.36.XX.XX b 470 nm 30 lm/m 7,4 W/m -

XXXXX.37.XX.XX a 593 nm 130 lm/m 7,4 W/m -

RGB 473 lm/m 16,6 W/m -

35 mm25 mm

18 mm

Acrylic solid material

LED stripe

35 mm25 mm LED stripe

30 mm


slimlux 18 od

slimlux 30 od

V4A316 L

Ø 4 mm

32 mm

Ø 9 mm

2 x 0,25 mm²RGB 4 x 0,25 mm

dot-spot88

LED

Lin

ear

Ligh

ting

LED strip slimlux 18/30 od, made to measure

▪ Line light, 18 x 35 mm or 30 x 35 mm for outdoor use

▪ robust design, waterproof, resistant to UV radiation and chemicals

▪ Outdoor installation in floors and facades, matching installation frames for any mounting situation available




Made to measure :Maximum single length ► 1980 mm


Profile63018.00.XX sl 18 standard 24 V DC sl 18 ► Installation profi le

63018.01.XX sl 18 standard 24 V DC sl 18 ► Mounting tabs

63030.00.XX sl 30 standard 24 V DC sl 30 ► Installation profi le

63030.01.XX sl 30 standard 24 V DC sl 30 ► Mounting tabs

Art.-No. Watt CRI

Packed length XXXXX.31 warm white 3000 K 420 lm/m 9,6 W/m >80 50 mm 15/15 mm

XXXXX.32 neutral white 4000 K 450 lm/m 9,6 W/m >80 50 mm 15/15 mm

XXXXX.33 cool white 6800 K 480 lm/m 9,6 W/m >80 50 mm 15/15 mm

XXXXX.34 red 624 nm 80 lm/m 7,4 W/m - 75 mm 15/15 mm

XXXXX.35 green 525 nm 180 lm/m 7,4 W/m - 75 mm 15/15 mm

XXXXX.36 blue 470 nm 30 lm/m 7,4 W/m - 75 mm 15/15 mm

XXXXX.37 amber 593 nm 130 lm/m 7,4 W/m - 75 mm 15/15 mm

XXXXX.99 RGB 473 lm/m 16,6 W/m - 100 mm 15/15 mm

Stainless steel installation profi le ► sl 18/30 od


95101 W sl 18Wall installation profile ► sl 18 od, V4A

95102 B sl 18Floor installation profile ► sl 18 od, V4A

95111 W sl 30Wall installation profile ► sl 30 od, V4A

95112 B sl 30Floor installation profile ► sl 30 od, V4A

96500 GEHR Surcharge, mitre cut for od light bars

Additional accessories from page ► 98 Dimensional drawing on page ► 89

Art.-No.


63031.41 0,15 m

63031.42 0,15 m

35 mm25 mm

18 mm


LED stripe

35 mm25 mm LED stripe

30 mm


slimlux 18 od

slimlux 30 od

max. 1980 mm

Item no. B x number of light bars

Item no. A x total length of all light bars A

B

Ø 4 mm

32 mm

Ø 9 mm

2 x 0,25 mm²RGB 4 x 0,25 mm

With optional mounting tabs


89

LED

Lin

ear

Ligh

ting


Stainless steel installation profile for slimlux 18/30 od

Floor installation profile

21 mm18 mm

75 mmØ 8,5 mm

25 mm 46 mm

80 mm

L

33 mm30 mm

87 mm

46 mm

80 mm

slimlux 18 od slimlux 30 od

Wall installation profile

L

slimlux 18 od

15

50

slimlux 30 od

15

50

"Tübinger Carré", Stuttgart

"Reblandhalle", Neckarwestheim

LED Handrail Lighting

Elegant and innovative: The dot-spot handrail lighting for grooved tubes by DAIDALOS®, 48 mm in diameteroffers extra safety. Depending on the lighting requirements, the dot-spot handrail lighting can be equipped different LED stripes. With that many various projects can be realized, be it effect lighting or total illumination of staircases and paths. The dot-spot handrail lighting always provides a noble, homogenous, pointless light pattern

for a perfect illumination. The shock-resistant PMMA cover perfectly fi ts into the grooved tubes by DAIDALOS®.When building a handrail you can use all standard DAIDALOS® accesso-ries. Thanks to the perfect integration ofthe water-sealed LEDs into the handrail the system can also be used in public spaces and outdoors.

dot-spot92

LED

Han

drai

l Lig

htin

g

LED Technology

Bracket for cable laying

Stainless steel retaining bracket

Homogenous light output

Daidalos® grooved tube, 48.3 mm

PMMA LED cover profi le


93


LED

Han

drai

l Lig

htin

g

LED Handrail Lighting

▪ LED set for handrail lighting for DAIDALOS® grooved tubes, 48.3 mm

▪ set consisting of diffuse PMMA cover, retaining clips and LED stripe

▪ assembling service included in the price: the LED stripes are manufactured and made to measure according to the plan an

equipped with connection cables; further LED stripes upon request

Supplier of the matching grooved tube and accessories ▪

ROSTFREI EDELSTAHL CONSULTINGREC PRODUKT + SERVICE GmbHSpitalwaldstraße 1591126 Schwabach / Germany phone: +49 (0)9122-9395-0fax: +49 (0)9122-9395-21email: [email protected]

Art.-No. Model

LED Handrail Lighting 70020.XX IP 20, indoor 24 V DC

70067.XX IP 67, outdoor 24 V DC

Art.-No. Type Watt CRI

LED stripeXXXXX.21 Premium warm white 2700 K 9,6 W/m ca. 600 lm/m >80

XXXXX.23 Premium neutral white 4000 K 9,6 W/m ca. 650 lm/m >80

XXXXX.25 Premium cool white 6300 K 9,6 W/m ca. 670 lm/m >80

XXXXX.22 Premium warm white 2700 K 19,2 W/m ca. 1410 lm/m >80

XXXXX.24 Premium neutral white 4000 K 19,2 W/m ca. 1512 lm/m >80

XXXXX.26 Premium cool white 6300 K 19,2 W/m ca. 1656 lm/m >80

XXXXX.28 Premium RGB 16,6 W/m ca. 445 lm/m -

XXXXX.01 Standard warm white 2700 K 9,6 W/m ca. 1050 lm/m >80

XXXXX.04 Standard neutral white 4500 K 9,6 W/m ca. 1200 lm/m >80

XXXXX.02 Standard warm white 2700 K 19,2 W/m ca. 2100 lm/m >80

XXXXX.05 Standard neutral white 4500 K 19,2 W/m ca. 2400 lm/m >80

XXXXX.09 Standard RGBW, 3000 K 19,2 W/m ca. 1120 lm/m -

IP 20IP 67

Ø 5 mm

2 x 0,5 mm²RGB 4 x 0,25 mm²RGBW 5 x 0,25 mm²

▪

dot-spot94

RIG

ILU

X® L

ED li

ne li

ghts

for

dryw

all c

onst

ruct

ion

RIGILUX® LED line lights for drywall construction7RIGILUX®, the innovative light system for drywall construc-tion opens up completely new design possibilitieswhen it comes to innovative illumination.

The RIGILUX® system consists of prefabricated plaster-board mouldings in which the LED line lights or lights areintegrated. The installation of the lighting elements is very easy. The lights are securely fi xed in the ducts by magnet holders. The system is ready-to-plug-in and can therefore be installed by the drywall constructor without any elec-trical training.

Be it decorative accent lighting or general illumination, the RIGILUX® system makes it possible to perfectlysolve a number of illumination tasks. The advantages are obvious:

▪ enormous time savings in designing LED illumination in drywall construction

▪ completely new freedom in illumination design

▪ exact cutouts for integrated lights

▪ can be completely installed by the drywall constructor

without any electrical knowledge▪



95

RIG

ILU

X® L

ED li

ne li

ghts

for

dryw

all c

onst

ruct

ion


▪ LED line light, 19 mm in width, homogeneously glowing, with magnetic mount

▪ complete system, dry construction molding with flush mounted LED line light

▪ complete price, incl. custom packing according to plan or customer specification


Art.-No. Model Type Watt CRI

RIGILUX® 19 VI

75191.21 RI 19 VI Premium warm white 2700 K 24 V DC 9,6 W/m ca. 600 lm/m >80

75191.23 RI 19 VI Premium neutral white 4000 K 24 V DC 9,6 W/m ca. 650 lm/m >80

75191.25 RI 19 VI Premium cool white 6300 K 24 V DC 9,6 W/m ca. 670 lm/m >80

75191.28 RI 19 VI Premium RGB 24 V DC 16,6 W/m ca. 445 lm/m -

75191.01 RI 19 VI Standard warm white 2700 K 24 V DC 9,6 W/m ca. 1000 lm/m >80

75191.04 RI 19 VI Standard white 4500 K 24 V DC 9,6 W/m ca. 1000 lm/m >80


75191.05 RI 19 VI Standard white 4500 K 24 V DC 19,2 W/m ca. 2000 lm/m >80

75191.12 RI 19 VI Standard blau 470 nm 24 V DC 9,6 W/m -

75191.13 RI 19 VI Standard grün 527 nm 24 V DC 9,6 W/m -

75191.14 RI 19 VI Standard amber 590 nm 24 V DC 9,6 W/m -

75191.15 RI 19 VI Standard rot 625 nm 24 V DC 9,6 W/m -

75191.09 RI 19 VI Standard RGBW, 3000 K 24 V DC 19,2 W/m ca. 1120 lm/m -

Accessories for RIGILUX® light systems / power supplies and LED controls


97001 RL AK 1 Connecting cable 5 m

97002 RL AK 2 Connecting chain with 2 connectors 7 m


97004 RL VL 2 Connecting cable 2 m


97006 RL AV 6 Terminal block with 6 connectors

97000 RI GER Mitre cut

RIGILUX® 19 VI

19 mm

34 mm

250 mm

dot-spot96

RIGILUX® 19 TI

RIG

ILU

X® L

ED li

ne li

ghts

for d

ryw

all c

onst

ruct

ion


▪ complete system, dry construction molding with integrated LED line light

▪ semi-integrated light bar, therefore very good illumination by reflection on the surrounding surfaces




RIGILUX 19® TI

75192.22 RI 19 TI Premium warm white 2700 K 24 V DC 19,2 W/m ca. 1410 lm/m >80

75192.24 RI 19 TI Premium neutral white 4000 K 24 V DC 19,2 W/m ca. 1512 lm/m >80

75192.26 RI 19 TI Premium cool white 6300 K 24 V DC 19,2 W/m ca. 1656 lm/m >80

75192.02 RI 19 TI Standard warm white 2700 K 24 V DC 19,2 W/m ca. 2100 lm/m >80

75192.05 RI 19 TI Standard neutral white 4000 K 24 V DC 19,2 W/m ca. 2400 lm/m >80

75192.09 RI 19 TI Standard RGBW, 3000 K 24 V DC 19,2 W/m ca. 1120 lm/m -

19 mm

23 mm

250 mm



97001 RL AK 1 connecting cable 5 m










97

RIG

ILU

X® L

ED li

ne li

ghts

for

dryw

all c

onst

ruct

ion


RIGILUX® 30 VI


▪ complete system, dry construction molding with flush mounted LED line light




RIGILUX® 30 TI

75300.22 RI 30 VI Premium warm white 2700 K 24 V DC 19,2 W/m ca. 1410 lm/m >80

75300.24 RI 30 VI Premium neutral white 4000 K 24 V DC 19,2 W/m ca. 1512 lm/m >80

75300.26 RI 30 VI Premium cool white 6300 K 24 V DC 19,2 W/m ca. 1656 lm/m >80


75300.05 RI 30 VI Standard neutral white 4000 K 24 V DC 19,2 W/m ca. 2400 lm/m >80

75300.09 RI 30 VI Standard RGBW, 3000 K 24 V DC 19,2 W/m ca. 1120 lm/m -

30 mm

57 mm

250 mm



97001 RL AK 1 Connecting cable 5 m







dot-spot98

Acc

esso

ries

LED power supplies 12 V, constant voltage Art.-No. Model Description Dimensions

90121 snt 12/12 Power supply 12 V 12 W, IP 20, with barrel connector 70 x 30 x 65 mm

90104 nt 12/6 do Power supply 12 V 6 W, IP 20 for indoor applications, for mounting in pattress boxes 50 x 40,8 x 21,5 mm

90105 nt 12/6 od set Power supply 12 V 6 W, IP 65 for exterior applications 94 x 94 x 57 mm

90112 nt 12/12 Power supply 12 V 12 W, IP 67, for mounting in pattress boxes Ø 55, H 24 mm

90134 nt 12/24 Power supply 12 V 24 W, IP 67, for mounting in pattress boxes Ø 63 x 32 mm

LED power supplies 12 V, constant voltage

▪ electronic LED switching power supplies

▪ fully encapsulated version, IP 67 for outdoor use, IP 20 for indoor use


▪ Input voltage 90 - 305 V DC, 127 - 431 V DC (IP 67), 220 - 240 (IP 20)

▪ dimmable models (D) with PWM output 0 - 100%, 3 in 1 dimming input: 1 - 10 V, PWM signal or potentiometer for dimming

LED light strips (not suitable for dimming the dot-spot LED spots)

▪ further models, e.g. for top-hat rail installation available upon request

▪ Data sheets containing the full specification available on the Internet at www.dot-spot.de in the section Accessories

▪ Observe installation instructions on p. 39


90106 nt 12/25 67 Power supply ► 12 V, 25 W, IP 67 148 x 40 x 30 mm

90130 nt 12/30 20 Power supply ► 12 V, 30 W, IP 20 140 x 45 x 27,5 mm

90107 nt 12/40 67 Power supply ► 12 V, 40 W, IP 67 162,5 x 43 x 32 mm

90107-D nt 12/40 67 D Power supply ► 12 V, 40 W, IP 67, dimmable 150 x 53 x 35 mm




90132-D nt 12/120 67 D Power supply ► 12 V, 120 W, IP 67, dimmable 191 x 63 x 37,5 mm


90118 nt 12/240 67 Power supply ► 12 V, 192 W, IP 67 244,2 x 68 x 38,8 mm


Accessories8

FIP 67 M

SELV

up to 120 W

from 150 W

Foto ▪ photograph ▪ photo: LIWATEC

▪


99


Acc

esso

ries

Accessories

LED power supplies 24 V, constant voltage Art.-No. Model Description Dimensions

90314 snt 24/24 Power supply 24 V 24 W, IP 20, with barrel connector 80 x 30 x H 65 mm

90315 nt 24/12 Power supply 24 V, 12 W, IP 67, for mounting in pattress boxes Ø 55 mm, H 24 mm

90316 nt 24/24 Power supply 24 V, 24 W, IP 67, for mounting in pattress boxes Ø 63 x 32 mm

LED power supplies 24 V, constant voltage

▪ electronic LED switching power supplies

▪ fully encapsulated version, IP 67 for outdoor use, IP 20 for indoor use


▪ Input voltage 90 - 305 V DC, 127 - 431 V DC (IP 67), 220 - 240 (IP 20)

▪ dimmable models (D) with PWM output 0 - 100%, 3 in 1 dimming input: 1 - 10 V, PWM signal or potentiometer for dimming

LED light strips (not suitable for dimming the dot-spot LED spots)

▪ further models, e.g. for top-hat rail installation available upon request

▪ Data sheets containing the full specification available on the Internet at www.dot-spot.de in the section Accessories

▪ Observe installation instructions on p. 39



90324 nt 24/30 20 L Power supply ► 24 V, 30 W, IP 20 241 x 32 x 16,5 mm





90307-D nt 24/90 67 D Power supply ► 24 V, 90 W, IP 67, dimmbar 171 x 63 x 37,5 mm

90326-D nt 24/120 67 D Power supply ► 24 V, 120 W, IP 67, dimmbar 191 x 63 x 37,5 mm


90312 nt 24/240 67 Power supply ► 24 V, 240 W, IP 67 244,2 x 68 x 38,8 mm



FIP 67 M

SELV

up to 120 W

from 150 W▪

dot-spot100

Accessories

Accessories

LED 1-channel dimming system

▪ LED 1-channel PWM dimming system, constant voltage for dot-spot LED spots and light strips

▪ DS-2501NS, 1-ch dimming module controllable with 1- and 5-channel remote control and/or wired button; furthermore, the module can be

operated via the WiFi transmitter Wi-Fi trmt 1 using a tablet or a smartphone

▪ DSP-1009-75W-CV, 24 V power supply with integrated radio dimmer. ▪ Controllable with 1- and 5-channel remote control and/or wired

button; furthermore, the module can be operated via the WiFi transmitter Wi-Fi trmt 1 using a tablet or a smartphone

▪ DS-2006, 1-ch dimming module for controlling with 1 - 10 V signal

▪ Dimming modules voltage range 12 - 36 V, max. current 8 A

▪ further versions, e.g. top-hat rail installation or IP-protected versions available upon request


91009 DS-2801 5-Zonen Fernbedienung, remote control with wall support 136 x 39x 12 mm

91011 DS-2807P 1-zone remote control, for wall installation Ø 32 x 9,8 mm

91008 DS-2501NS Touch/radio-controlled dimmer CV, 8 A 95 x 37 x 20 mm

91012 DS-2006 1 - 10 V dimmer CV, 8 A 95 x 37 x 20 mm

90340DSP-1009-75W-CV

Power supply ► 24 V, 75 W, IP 20, with radio-controlled dimmer 210 x 50 x 32 mm

LED RGB(W) 1-4-channel radio system, programmable

▪ LED PWM radio controller with receiver for 1-, 2-, 3-, 4-channel, constant voltage for dot-spot spots and LED strips

▪ Voltage 8 - 26 V, 1-channel module 8 A, 2-channel module 2 x 5 A, 3-channel module 3 x 5 A, 4-channel module 4 x 4 A

▪ 3-/4-channel module with 11 preprogrammed lighting scenarios, and 16 fixed colours, 3 programmes freely configurable via USB dongle;

with fire and thunderstorm simulation

▪ multiple modules linkable via radio, linkable with M12 plug system

▪ further components, e.g. for WiFi or Bluetooth control available upon request


91501 fb funk 1K Radio remote control for fc radio 1 ch 105 x 68 x 28 mm

91502 fb funk 2K Radio remote control for fc radio 2 ch 105 x 68 x 28 mm

91500 fb funk Radio remote control for RGB and RGBW controller 105 x 68 x 28 mm

91701 fc funk 1K 1-channel radio controlled controller, CV, 8 A 182 x 52 x 22 mm

91702 fc funk 2K 2-channel radio controlled controller, CV, 2 x 5 A 182 x 52 x 22 mm

91703 fc funk RGB 3-channel radio controlled controller, CV, 3 x 5 A 182 x 52 x 22 mm

SELV

SELV


91704 fc funk RGBW 4-channel radio controlled controller, CV, 4 x 4 A 182 x 52 x 22 mm

91705 fc funk do USB radio dongle, for programming via PC 80 x 25 x 15 mm

LED RGBW 4-zone radio system with WiFi option

▪ LED RGB(W) PWM radio system, constant voltage for dot-spot spots and LED strips

▪ Voltage 12 - 36 V, 4 x 5 A, controller with innovative plug terminals

▪ Setting of preprogrammed dynamic colour sequences or fixed colours via colour wheel touch control

▪ Control element as handheld radio transmitter and/or glass touch panel for flush mounting

▪ controllable via Wi-Fi trmt1 using a free Android or IOS application on smartphones and tablets

▪ the control units and the application allow the setting up of different and individually controllable zones

▪ Housing variants IP 20, IP 67 and DIN rail installation


91503 DS-2819S 4-zone handheld radio transmitter 120 x 55 x 17 mm

91504 DS-2820 4-zone radio touch panel for fl ush-mounting box 86 x 86 x 30 mm

91706 DS-1009PD 4-channel radio controller CV, 4 x 5 A 166 x 53,4 x 23 mm

91707 DS-1009DIN 4-ch radio controller for top-hat rail CV, 4 x 5 A 110 x 53 x 65 mm

91708 DS-1009FAWP 4-channel radio controller CV, 4 x 5 A, IP 67 180,5 x 73,6 x 38 mm

91709 DS-2818WiTR Wi-Fi transmitter 99 x 55 x 20 mm

LED Dali System

▪ LED RGB(W) PWM Dali system, constant voltage for dot-spot spots and LED strips


▪ Setting via Dali system provided by the customer or via optional, elegant glass touch panel with preprogrammed dynamic colour sequences or

fixed colours to be chosen using the colour wheel ▪ Housing variants IP 20, IP 67 and DIN rail installation


90912DS-2300TR-RGBW

4-zone radio touch panel for fl ush-mounting box 86 x 86 x 30 mm

90913 DS-2303P 4-channel Dali controller CV, 4 x 5 A 166 x 53,4 x 23 mm

90914 DS-2303DIN 4-channel Dali controller for DIN rail cv, 4 x 5 A 110 x 53 x 65 mm

90915 DS-2303BWP 4-channel Dali controller CV, 4 x 5 A, IP 67 180,5 x 73,6 x 38 mm

90916 DS-2303S 1-channel radio controller CV, 1 x 5 A 82 x 33 x 20 mm

101


Acc

esso

ries

Accessories

IP 67

SELV

IP 67

SELV

dot-spot102

Acc

esso

ries

Accessories

LED DMX System

▪ LED RGB(W) PWM DMX system, constant voltage for dot-spot spots and LED strips


▪ Setting via DMX system provided by the customer or via optional, elegant glass touch panel with preprogrammed dynamic colour sequences or

fixed colours to be chosen using the colour wheel



90917 DS-2812 4-zone DMX touch panel for flush-mounting box 86 x 86 x 30 mm

90918 DS-2102P 4-channel DMX controller cv, 4 x 5 A 166 x 53,4 x 23 mm

90919 DS-2102DIN 4-channel DMX controller for DIN rail cv, 4 x 5 A 110 x 53 x 65 mm

90920 DS-2102D(WP) 4-channel DMX controller cv, 4 x 5 A, IP 67 180,5 x 73,6 x 38 mm

LED KNX System

▪ LED RGB(W) PWM KNX system, constant voltage for dot-spot spots and LED strips

▪ Voltage 12-36 V, 4 x 5 A, controller with innovative plug terminals

▪ Housing variants IP 20 and DIN rail installation


90921 DS-KNX9512FA 4-channel KNX controller cv, 4 x 5 A 166 x 53,4 x 23 mm

90922 DS-KNX9511FA 4-channel KNX controller for DIN rail cv, 4 x 5 A 91 x 72 x 66,4 mm

4-channel power repeater

▪ LED RGB(W) PWM power repeater, constant voltage for dot-spot spots and LED strips

▪ Can be connected with any radio, Dali, DMX or KNX controller in order to increase the connected load

▪ Voltage 12 - 36 V, 4 x 5 A, or 8 A controller with innovative plug terminals



90923 DS-3002 4-channel repeater CV, 4 x 8 A 170 x 59 x 29 mm

90924 DS-3003S 1-channel repeater CV, 1 x 8 A 95 x 37 x 20 mm

90925 DS-3001DIN 4-channel repeater for DIN rail CV, 4 x 5 A 110 x 53 x 65 mm

90926 DS-3001WP 4-channel radio controller CV, 4 x 5 A, IP 67 180,5 x 73,6 x 38 mm

IP 67

SELV

SELV

IP 67

SELV


103


Acc

esso

ries

Accessories

Mounting accessories Art.-No. Model Description

98000 KL Geko Special glue Hydro Geko, for outside and inside application, waterproof bonding, cartridge 300 ml

98001 KL trans Special glue, transparent, for outside and inside application, cartridge 300 ml

98002 KB VHB 55/17 VHB special adhesive tape, colourless, for outdoor and indoor use, thickness 0.5 mm, roll 55 m, width 17 mm

98003 KB VHB 33/8 VHB special adhesive tape, colourless, for outdoor and indoor use, thickness 0.5 mm, roll 33 m, width 8 mm

98004 KB 20/60 Mirror tape, for indoor use, adhesive pad, width 20 mm, length 60 mm

98005 KB 15/66 Mirror tape, for indoor use, roll, width 15 mm, length 66 m

Connection cable without plug Art.-No. Model Description Dimensions

92602 AK 10 PUR 2 x 0,5 PUR connecting line 2 x 0,5 mm² 10 m

92600 AK 50 PUR 2 x 0,5 PUR connecting line 2 x 0,5 mm² 50 m

92603 AK 10 PVC 5 x 0,35 PVC connecting line 5 x 0,35 mm² 10 m

92601 AK 50 PVC 5 x 0,35 PVC connecting line 5 x 0,35 mm² 50 m

Connection accessories for open cables Art.-No. Model Description Dimensions

94700 VS-1 Set for waterproof cable connection

94502 KV G 68 Cable connector, straight, IP 68, 3-pole connection

94501 KV T 68 Cable connector T union, IP 68, 3-pole connection

94801 Gel-Box 1 Gel box, with 2 terminals 155 x 50 x 33 mm

94802 Gel-Box 2 Gel box, with 4 terminals 200 x 75 x 37 mm

Floor junction boxes and cover stonesArt.-No. Model Description Dimensions

94901 ksr 25 fl oor junction box, round Ø 25 cm

94902 kse 41/28 floor junction box, rectangular 41 x 28 cm

94903 adf 1 cover stone 200 x 200 x 300 mm

dot-spot104

Zube

hör ▪ A

cces

sorie

s ▪ A

cces

soire

s

Accessories

Connection cable for IP 20 LED bars Art.-No. Model Description Dimensions

92401 AK sl 20-015 ST 2-pole connection cable, with plug 0,15 m

92402 AK sl 20-2 BU 2-pole connection cable, with socket 2 m


92411AK sl RGB 20-015 ST

4-pole connection cable, with plug 0,15 m

92412AK sl RGB 20-2 BU

4-pole connection cable, with socket 2 m



Connection cable for IP 67 LED bars Art.-No. Model Description Dimensions

92501 AK sl 67-015 ST 2-pole connection cable, with plug 0,15 m



92511AK sl RGB 67-015 ST

4-pole connection cable, with plug 0,15 m






105


Zube

hör ▪ A

cces

sorie

s ▪ A

cces

soire

s

ZubehörAccessoriesAccessoires

Foto ▪ photograph ▪ photo: LIWATEC

12 x clarios 15 W

dot-spot106

LED

Dis

play

s fo

r ad

vert

isin

g an

d ar

chit

ectu

re

LED displays for advertising and architecture

Eye-catching LED displays and video screens for advertising and architecture

▪ Video screens, monochrome and RGB, to display video clips, animated or static images and texts

▪ patented technology, developed and manufactured in Europe

▪ waterproof LED panels, IP 67, for indoor and outdoor use

▪ high luminous intensity, clearly readable even in direct sunlight

▪ modular design, die single small-format panels can be arranged to form surfaces of any geometry, also roundings are possible

▪ extremely light, panel thickness just 8 mm, with power supply 31 mm, weight only 18 kg/m², no complex support structure required

▪ low energy consumption, only 110 W/m² averagely during operation

▪ Controlled by linear driver, therefore a brilliant and flicker-free image

▪ absolutely quiet maintenance-free, since no fan is needed for cooling

▪ available with various resolutions depending on the purpose

▪ with brightness sensor for the dynamic adjustment of the luminous intensity

▪ Airing possible in automatic stand-alone operation or via remote Internet access

9


107


dot-spot representatives

The information in this catalogue was correct when print-ed. We reserve the right to make technical changes. For the latest documentation visit our website at www.dot-spot.de

Copyright, reprinting, or reproduction of excerpts subject to permission of dot-spot GmbH & Co. KG.

Spain

SOLTEC SISTEMAS DE ILUMINACIÓN S.L. Pou del Posmó, 27Pol. Ind. Les GalguesES-03750 Pedreguer (Alicante)Tel.: +34 (0) 96 645 41 14Fax: +34 (0) 96 575 77 38 Mail: [email protected]: www.soltecsystem.com

Czech Republic

Green engineering s.r.o.Olešná 101CZ-Olešná 398 43Tel +42 (0) 382 587 193Fax +42 (0) 382 587 193Mail: [email protected]: www.dot-spot.cz

Hungary

Ledker Kft.Bemutatóterem: 1111 Budapest, Budafoki út 10/A.Tel.: +36 / 1 209 91 12 Mail: [email protected]: www.ledker.hu

Cyprus

DARK ARCHITECTURAL LIGHTINGAndreas PieridesAylas Phylaxeos 149Maylia Court3083 Limassol-CyprusTel.: +357 25 253275Fax.: +357 99 666643Mail: [email protected]: www.dark-cy.com

ASIA

India

M/S INNOVATIVE LIGHTING DESIGNS LTDD-14/9, First Floor,Okhla Industrial Area, Phase - 1New Delhi - 110020Tel.: +91 11 414 06 71 6Fax: +91 11 414 06 71 7Mail: [email protected]: www.ildlimited.com

Israel

Steinitz Lirad - Lighting Engineering Ltd.25 Hatzoref St.Har- Yona Industrial AreaP.O.B. 588Nazareth Illit – 17000Tel.: +972 4 6414 525Fax: +972 4 6414 306Mail: [email protected]: http://steinitzliradlighting.com

Middle East, Arabian Peninsula

DPS INDUSTRIAL GMBH & CO. KGSachsenstraße 5D-20097 HamburgTel.: +49 (0) 40 68 28 97 - 0Fax: +49 (0) 40 68 28 97 - 31Mail: [email protected]: www.dps-lighting.de

Singapore

Relex Illumination Pte LtdBlk 3014A Ubi Road 1 #07-07/08Singapore 408703Tel.: +65 (0) 6285 3633Fax: +65 (0) 6285 3107Mail: [email protected]: www.relex.com.sg

AFRICA

South Africa

ILLUMINATE PROJECT LIGHTING6 Roderick Way, Constantia, 7806, Cape Town, South AfricaTel: +27 (0) 82 824 9274Fax: +27( 0) 86 243 3951Mail: [email protected]: www.illuminatelighting.co.za

dot-

spot

Stü

tzpu

nkth

ändl

er ▪

dot-s

pot r

epre

sent

ativ

es ▪

Repr

ésen

tant

s do

t-spo

t

dot-spot GmbH & Co. KGIndustriestraße 1A90592 Schwarzenbruck

dot-spot representatives abroad

Norway

Nortronic ASSkiveien 61410 KolbotnTel.: +47 66 81 38 60Fax: +47 66 81 38 61Mail: fi [email protected]

Austria

KLAUS EBNERKuntenweg 7A-6114 WeerTel.: +43 (0) 664 406 29 21Mail: [email protected]

Poland

POLTHERAul. Traugutta 2543-300 Bielsko-BiałaTel: + 48 33 821 9363Fax: + 48 33 821 9363Web: www.dot-spot.pl

Switzerland

dot-spot SchweizHofmatt 22CH-6332 HagedornTel.: +41 (0) 41 780 52 55Fax: +41 (0) 41 780 52 80Mail: [email protected]: www.dot-spot.ch

M. SCHÖNENBERGER AGIndustriestraße 17CH-5507 MellingenTel. +41 (0) 56 48 18 141Fax +41 (0) 56 48 18 145Mail: [email protected]: www.msch-ag.ch

Serbia

aiLEDis d.o.o.Zelengorska 2RS-11300 SmederevoTel.: +381 (0) 64 35 98 185 Mail: offi [email protected] Web: www.aiLEDis.rs

EUROPE:

Balearic Islands

InterLED, Sounds & VisionsGremi de Tintorers 43Son CastellóES-07009 Palma de MallorcaTel. +34 (0) 664 36 44 44Mail: [email protected]: www.MallorcaLED.com

LeuchtenkingAvda. Rey Jaume, No. 100, planta1, local 2, 07180 Santa Ponsa, Islas Baleares SpainTel.: +34 (0) 661 806 206Mail: [email protected]: www.lightingking.es

Italy

Interactive System GmbhPiave Str. 7339012 Meran (BZ)Tel.: +39 0473 235474Fax: +39 0473 270242Email: [email protected]

Malta

BRIGHTER SOLUTIONS LTD.2/3 Tal-Balal RoadXwieki L/O Gharghur GHR9014MaltaTel.: +356 (0) 21424750 - 27424750Fax: +356 (0) 21 364 074Mail: [email protected]: www.brightersolutions.com.mt

Netherlands

Q-CAT Lighting b.v.Van Heekstr 113125 BN SchiedamTel.: +31 (0) 10 415 18 11Fax: +31 (0) 10 415 17 15Mail: [email protected]: www.qcat-lighting.nl

Tel.: +49 (0) 9128 / 72 22 17 - 0Fax: +49 (0) 9128 / 72 22 17 - 9Mail: [email protected]: www.dot-spot.de

United Kingdom

Flairlight Designs LtdUnit 18, First QuarterBlenheim Road, Longmead Business Park,Epsom, Surrey. KT19 9QNTel: +44 (0) 1372 888455Fax: +44 (0) 1372 888215Mail: [email protected]: www.flairlight.co.uk

Flairlight Head Office & Showroom Unit 18 First QuarterBlenheim RoadLongmead Business Park Epsom, SurreyKT19 9QNUnited KingdomTel. 01372 888 455 | www.flairlight.co.uk

[email protected]

Date post:	11-Sep-2021
Category:	Documents
Upload:	others
View:	2 times
Download:	0 times

Flairlight's latest LED lighting Catalogue

Documents