FlatRoofing
Flat RoofingBrochure
2
Market Sectors
Our flat roofing products have been used in a wide cross section of sectors for a range of building types.
The sectors below give an indication of the variety of uses for our products.
Private Housing Care Home, Stoke-on-Trent, UK
IndustrialMorrisons Distribution Centre, Bridgwater, Somerset, UK
RetailPorsche Show Room, Chester, UK
InfrastructureAerospace, Goodrich, UK
Retail Morrisons Supermarket, Salford, UK
3
Market Sectors
Education Ysgol Bro Alun School, Wrexham, UK
Offices The Crofts Office, Rotherham, UK
Health One Centre, Hartlepool, UK
Retail Tesco Supermarket, Batley, UK
* Please be aware that our trailers limit lengths to 11.8m.
4
Kingspan Topdek KS1000 TD
Standing Seam Effect & Membrane Roof
Sanvey Gate Apartments, Leicester, UK (with a standing seam aesthetic)
Kingspan Topdek is a single component, factory pre-engineered roof deck, comprising a high performance single-ply PVC / TPE membrane with insulation and a trapezoidal steel deck, that can eliminate the need for valley-hip and boundary wall gutters. It is suitable for flat and pitched roofs above 1:80 (0.72º) after deflection, as well as curved roof applications with a convex curve (45m radius) and concave curve (50m radius).
Product Features
Profile: Flat single-ply PVC / TPE membrane, with optional standing seam aesthetic
Fixing detail: Secret-fix appearance
Metal type: N/A
Application: Flat and pitched roofs above 1:80 (0.72º) after deflection, and curved roof with a convex curve (45m radius) and concave curve (50m radius)
Lengths: From 1.5m to 16m*
Cover width: 1000mm
Environmental rating:
May be Green Guide A+ rated, subject to project specific assessment
Fire rating: LPCB, FM approved
Product compatibility:
Integrates with Kingspan Safety solutions and Kingspan Roof Mounted PV System and is compatible with common lighting solutions such as dome, pyramid and atrium
Type of membrane:
PVC (Polyvinyl Chloride) / TPE (Thermoplastic Elastomer) in 4 RAL colours
5
Kingspan Topdek KS1000 TD
Standing Seam Effect & Membrane Roof
Captains Club Hotel, Bournemouth, UK
KS1000 TD
Product Specifications and Accreditations
Product Reference
Standard Environment
Temp. Control
HygieneHigh
HumidityLow
Temp.
Fire Rating
LPCB FM
KS1000 TD P P P l l P P
Dimensions, Weight and Thermal Performance
Core Thickness (mm) 34 71 91 100 120
Overall Thickness (mm) 72 109 129 138 158
U-value (W/m2K) 0.48 0.25 0.20 0.18 0.15
Weight (kg/m2) 0.5mm Deck 9.0 10.5 11.3 11.7 12.5
The U-values have been calculated using the method required by the appropriate National Building Regulations.
Topdek100mm thickness
38mm
1000mm Cover Width60mm
200mm
Core Thickness
6
Profile: Flat roof deck
Fixing detail: Secret-fix appearance externally and visible fixings internally
Metal type: Steel
Application:
Flat and pitched roofs above 1:80 (0.72º) after deflection*, and curved roof with a convex curve** (30m radius) and concave curve** (15m radius)
Spans: Double spans of up to 6m can be achieved depending on load and roof type
Lengths: From 1.8m to 16m†
Cover width: 1000mm
Environmental rating:
May be Green Guide A+ rated, subject to project specific assessment
Product compatibility:
Integrates with Kingspan Safety solutions and Kingspan Roof Mounted PV System and is compatible with common lighting solutions such as domed, pyramid and atria
* Governed by the minimum pitch of the waterproofing layer used.** Tested on 46mm BENCHMARK Envirodek only, other radii are treated on a case by case basis. Please contact Kingspan Technical Services for assistance. The convex and concave curves are measured across the width (facet) of the panel, not along the length. † Please be aware that our trailers limit lengths to 11.8m.
BENCHMARK Envirodek is an insulated roof deck that has been specifically designed to support green and brown roof systems, for both intensive and extensive solutions. It can double span up to 6m and is compatible with a wide range of waterproofing and green roof systems.
BENCHMARK By Kingspan is a member of the Green Roof Organisation (GRO).
BENCHMARK ENVIRODEK ROOF SYSTEM / GREEN ROOF
River House, London, UK (Image courtesy of IKO plc)
PRODUCT FEATURES
7
PRODUCT SPECIFICATIONS AND ACCREDITATIONSProduct Reference
Standard Environment
Temp. Control
HygieneHigh
HumidityLow Temp.
Fire Rating
LPCB FM
BENCHMARK Envirodek P P P P l l l
DIMENSIONS, WEIGHT AND THERMAL PERFORMANCECore Thickness (mm) 66 102 126
Overall Thickness (mm) 174 210 234
U-value (W/m2K) 0.25 0.18 0.15
Weight (kg/m2) 0.9mm Deck 20.4 21.8 22.8
The U-values have been calculated using the method required by the appropriate National Building Regulations.
BENCHMARK ENVIRODEK ROOF SYSTEM / GREEN ROOF
Bideford College, Devon, UK
BENCHMARK ENVIRODEK
Envirodek102mm thickness
160mm
1000mm Cover Width
108mm
Core Thickness
8
BENCHMARK TOPSPAN ROOF SYSTEM / STANDING SEAM & MEMBRANE
Wellingborough Pool, Northamptonshire, UK (Image courtesy of IPS Rubberfuse)
BENCHMARK Topspan is an insulated roof deck combining a structural deck and metal top sheet in one product. The panels are suitable for zinc, stainless steel and aluminium standing seam waterproofing systems, and single-ply membranes.
BENCHMARK Topspan provides a clear span capability of up to 8m and is faster to install than alternative built-up roof deck sytems.
Profile: Flat roof deck
Fixing detail: Secret-fix appearance externally and visible fixings internally
Metal type: Steel
Application:
Flat and pitched roofs above 1:80 (0.72º) after deflection*, and curved roof with a convex curve** (30m radius) and concave curve** (15m radius)
Spans: Suitable for frame-to-frame spanning of up to 8m, depending on applied loads
Lengths: From 1.8m to 16m†
Cover width: 1000mm
Environmental rating:
May be Green Guide A+ rated, subject to project specific assessment
Fire rating: LPCB approved (66mm core only)
Product compatibility:
Integrates with Kingspan Safety solutions and Kingspan Roof Mounted PV System and is compatible with common lighting solutions such as domed, pyramid and atria
* Governed by the minimum pitch of the waterproofing layer used.** Tested on 46mm BENCHMARK Topspan only, other radii are treated on a case by case basis. Please contact Kingspan Technical Services for assistance. The convex and concave curves are measured across the width (facet) of the panel, not along the length. † Please be aware that our trailers limit lengths to 11.8m.
PRODUCT FEATURES
9
BENCHMARK TOPSPAN ROOF SYSTEM / STANDING SEAM & MEMBRANE
PRODUCT SPECIFICATIONS AND ACCREDITATIONSProduct Reference
Standard Environment
Temp. Control
HygieneHigh
HumidityLow Temp.
Fire Rating
LPCB FM
BENCHMARK Topspan P P P P l P l
DIMENSIONS, WEIGHT AND THERMAL PERFORMANCECore Thickness (mm) 66 102 126
Overall Thickness (mm) 174 210 234
U-value (W/m2K) 0.25 0.18 0.15
Weight (kg/m2) 0.9mm Deck 20.4 21.8 22.8
The U-values have been calculated using the method required by the appropriate National Building Regulations.
BENCHMARK TOPSPAN
One Centre, Hartlepool, UK
Envirodek102mm thickness
160mm
1000mm Cover Width
108mm
Core Thickness
10
BENCHMARK ROOFLINER ROOF SYSTEM / STANDING SEAM & MEMBRANE
St. John’s Community Hospital, Enniscorthy, Ireland
BENCHMARK Roofliner is an insulated roof panel that is ideal for standing seam finishes. The panels are specifically designed for zinc, stainless steel and aluminium standing seam waterproofing systems, and single-ply membranes.
BENCHMARK Roofliner is available in a large range of thicknesses, achieving a U-value as low as 0.09W/m²K and has an attractive flat internal liner profile for aesthetics.
PRODUCT FEATURES
PRODUCT FEATURES Profile: Flat insulated roof panel
Fixing detail: Secret-fix appearance externally and visible fixings internally
Metal type: Steel
Application:
Flat and pitched roofs above 1:80 (0.72º) after deflection*, and curved roof with a convex and concave curve** of ≥20m (600mm cover width) and ≥25m (1100mm cover width)
Lengths: From 1.8m to 16.5m†
Cover width: 600mm and 1100mm
Environmental rating:
May be Green Guide A+ rated, subject to project specific assessment
Product compatibility:
Integrates with Kingspan Safety solutions and Kingspan Roof Mounted PV System and is compatible with common lighting solutions such as domed, pyramid and atria
* Governed by the minimum pitch of the waterproofing layer used.** Across the width (facet) of the panel, not along the length. † Please be aware that our trailers limit lengths to 11.8m
11
BENCHMARK ROOFLINER ROOF SYSTEM / STANDING SEAM & MEMBRANE
BENCHMARK ROOFLINER
Motorway Service Station, Lusk, Ireland
PRODUCT SPECIFICATIONS AND ACCREDITATIONSProduct Reference
Standard Environment
Temp. Control
HygieneHigh
HumidityLow Temp.
Fire Rating
LPCB FM
BENCHMARK Roofliner P P P P l l l
DIMENSIONS, WEIGHT AND THERMAL PERFORMANCECore Thickness (mm) 80 100 125 150 175 200 220
U-value (W/m2K) 0.25 0.20 0.16 0.14 0.12 0.10 0.09
Weight (kg/m2) 13.6 14.4 15.4 16.4 17.4 18.4 19.1
The U-values have been calculated using the method required by the appropriate National Building Regulations.
Roo�iner125mm thickness
600mm & 1100mm Cover Widths
Core Thickness
03/2015
Kingspan Limited Greenfield Business Park No. 2, Greenfield, Holywell, Flintshire, CH8 7GJ, UK t: +44 (0) 1352 716100 f: +44 (0) 1352 710161 www.kingspanpanels.co.uk
Carrickmacross Road, Kingscourt, Co Cavan, Ireland t: +353 (0) 42 969 8500 f: +353 (0) 42 969 8572 www.kingspanpanels.ie
For the product offering in other markets please contact your local sales representative or visit www.kingspanpanels.com
Care has been taken to ensure that the contents of this publication are accurate, but Kingspan Limited and its subsidiary companies do not accept responsibility for errors or for information that is found to be misleading. Suggestions for, or description of, the end use or application of products or methods of working are for information only and Kingspan Limited and its subsidiaries accept no liability in respect thereof.