Fleaximeer Start to Finish

PROFILEFROM START TO FINISH

The World’s Most Trusted Name In Hose, Hydraulics & Industrial MaterialsSaudi Arabia - Dammam

ACCESSORIES GATES FLEXIMAK INDUSTRIAL CATALOGUE

A N 1 S O 9 0 0 1 C E R T I F I E D C O M P A N Y

THE WORLD’S MOST TRUSTED NAME IN BELTS, HOSE, HYDRAULICS & RELATED SERVICESDubai (Al Ramoul & Al Quoz) • Jebel Ali • Abu Dhabi • Doha • Dammam • Jubail • Kuwait

OVERVIEW

The range of Accessories fromGates Fleximak has beendeveloped for optimum performance and best value, utilising Gates extensivemanufacturing knowledge.

Accessories supplied from GatesFleximak and its service centres are of the best quality and provide for abroad range of applications.

All accessories from Gates Fleximakare:

• Stored in a dust free and air-conditioned environment.

• manufactured by ISO 9000accredited manufacturers

• supplied in bulk or a one off requirement

PRODUCT RANGE

Hydraulic Tank Accessories

Hydraulic Pressure Test Points

HP Ball Valves

HP Needle Valves

SAE O-ring Blocks and Clamps

O-rings and Dowty Washers

Whip Checks

Metric & Imperial Tube Clamps

Spiral Hose Guard

Silicon Fire Protection Sleeve

Techmaflex Hose Assembly

Equipment

High Performance Racing Hoses and

Fittings (Please consult your nearest

Service Centre for these items)

CONTENTS

01

02

03 04 05 06

Fleximeer Corporation

Hydraulic Hoses

Hydraulic Fitting & Adapters

Industrial Hoses

Industrial Fittings

Stainless Steel Hoses

07 Accessories


AdVANCING THE SCIENCE OF MOTION PERFORMANCE

Shareef M Al-Shubbar Est. ,diversified industrial company that provides precision products, services, and systems for fluid transfer applications that power progress and foster long-term customer and employee relationships. Fleximeer advances the science of motion performance in ways that reduce total cost of ownership with an almost endless range of industrial and automotive solutions.

Fleximeer enable the movement of a wide range of fluids - from crude oil to chemicals to carbonated beverages. Hydraulic systems transmit power to all types of machines, from mining and construction equipment to agricultural equipment used to harvest and process the crops needed to feed the world. In short, if it moves you, there’s a good chance Fleximeer has a part in it.

Progress never stands still. And neither do we.

CORPORATION

Headquartered in the Safwa in the Saudi Arabia, Fleximeer was established in 2008 as the specialist fluid engineering and service division , focused on hydraulic Hoses & Fittings. The main activities of the company are directed at the Marine, Offshore, Oil & Gas, Industrial . The Fleximeer footprint spreads, with operational locations throughout the Saudi Arabia.

Fleximeer has the infrastructure today to become a preferred strategic partner and solution provider for any business facing fluid power . Our key capabilities include Product Supply, Our product and services scope includes the supply, installation and commissioning of hydraulic and industrial hoses, hydraulic solutions, pumps.

Our people are our biggest asset. Their extensive knowledge based on local experience, shared resources across the world, and the ability to work as a team make us second to none in our field. Call us to find out how we can make a difference to your engineering challenge.


HYdRAulIC MARKET

As Original Equipment Manufacturers (OEMs) market their products across national boundaries, you need to be able to order hydraulic products that consistently meet the most rigorous international quality requirements, standards and industry specifications.

Fleximeer manufacturing footprint that operates under standardized and high-quality product and output specifications. manufacturing processes allow any of our customers — regardless of where they are — to buy our hydraulic products that look consistent and perform to the same exacting standards.Hydraulic hose, couplings and equipment are becoming the standards for quality and reliability.

Fleximeer hydraulic hose, couplings and equipment can save you time and money, no matter your time zone or currency.

HYdRAulIC HOSE ANd FITTING SY STEMS

As advanced hydraulic systems are designed and engineered into more and more high-powered, high-pressure equipment, the importance of high-quality, flexible, durable hose assemblies that won’t fail has never been more critical. However fabricating a superior hose assembly involves more than merely crimping a coupling on a hose. The variables involved include the coupling stem and ferrule design, hose reinforcement, hose tube material, and the outside diameters of both the hose and the crimped coupling. How reliable the resulting assembly will be depends not only on how well the components are made, but on how well they are made for each other.

As the industry leader in hydraulic hose technology, has developed an integrated solution to meet the expanding needs of today’s hydraulic systems – and tomorrow’s. Both the hose and the coupling, designingone to complement the other. After individual components are made, hose assemblies are fabricated and performance tested to ensure that the hose and couplings perform up to and well beyond industry standards. Whether it is wire braided hose and couplings, or spiral wire hose and Global Spiral couplings, it is how delivers leak-free performance.

Fleximeer hydraulic hose and fitting systems offer a combination of technology, performance and flexibility that is unmatched by anything on the market today

– or for the foreseeable future! Fleximeer hydraulic hose and fittings providemaximum flexibility and performance in a wide range of high-pressure hydraulic applications, while simplifying hose selection and assembly fabrication, and yet still meeting or exceeding SAE, EN, ISO or industry specific standards.

HYDRAULIC HOSE

Product Range :- Hydraulic Hoses.- Thermoplastic Hoses.- Thermoplastic HP Jetting Hoses.- Teflon (PTFE) Hoses.- Composite Hoses.


�

��

��

��

��

HOSES FITTINGS, ADAPTERS AND FERRULE

The World’s Most Trusted Name In Hose, Hydraulics & Industrial Materials Saudi Arabia - Dammam

FITTING SELECTION

Thread Identification

With the use of a Vernier Calliper, Thread Gauge (if required) and the Fleximeer thread identification charts, end styles can be easily identified.

Operating pressure

Fleximeer supplied fittings are rated for continuous operation at the maximum operating design pressure relevant to correct product selection, assembly and application.

The operating pressure is normally one-fourth of the hose minimum burst pressure.

Pressure Surges

In hydraulic systems where pressure surges are severe, the upgrade or application of Multi-spiral hose and fittings may be required. The Interlock range (04 Tail) is ideal for these purposes.

Materials

Fittings are available in anodised steel while some terminations are available in stainless steel, aluminium, Monel and brass

Ferrules

All swage ferrules are designed for 8 jaw swaging.

All hydraulic fittings from Fleximeer are:

� stored in a dust free and air-conditioned environment.

� anodised through special longlasting corrosion resistance process

� having a minimal amount ofbrazed parts

� manufactured in JIC, BSP,NPT, DIN Metric, SAE, UN, GAZ, SAE O-ring Flange and many other terminations

� using versatile single or twopiece swaging program

� manufactured from high gradesteel.

INDUSTRIAL HOSE

Whether you need to transfer the most corrosive of acids, pump fuel from a tanker, or provide air throughout a workshop - We have a solution for you. The Industrial Hose range is as broad and diverse as the markets we serve and is backed by industrial hose application experts. We offers an extensive range of hose and fittings in the following hose/market type. > Acid Chemical.> Potable Water > Mining > Petroleum Transfer > Air & Multi-Purpose > Food & Beverage > Marine > Material Handling > Steam > Pressure Washer

Regardless of the application, without the proper selection of hose and fittings, you run the risk of hose failure which can have serious consequences to equipment, personnel and the environment. Hose specialists match the right hose and fittings to your application. Everything you require in your application is taken into account to ensure the hose assembly supplies is suited to its end application and environment.

With a full assortment of industrial hose accessories, large fabrication capability, and full diagnostic, testing and inspection capabilities, your best choice for your Industrial hose requirements.


INDUSTRIAL HOSE FITTINGS GATES FLEXIMAK INDUSTRIAL CATALOGUE

OVERVIEW

All industrial fittings from Fleximeer are:


• Galvanised where required

• Interchangeable with many other couplings

• Durable and cost effective

FITTING SELECTION

Termination Identification

Most couplings fall into a common generic description, which allows for easy designation of style or type.

Operating pressure

Fleximeer supplied fittings are rated for continuous operation at the maximum operating design pressure relevant to correct product selection, assembly and application.

The operating pressure is normally one-third of the component minimum burst pressure.

Materials

Fittings are available in aluminium, galvanised malleable iron, steel, stainless steel, brass and polypropylene in some cases.

Assembly

Most industrial couplings are designed to be assembled on to hose with assorted styles of clamps.

COMPREHENSIVE RANGE

Air King Crowfoot Fittings

Boss Steam Couplings

Cam & Groove Couplings

Holedall Large Bore Fittings

Hose Clamps

King Nipples

Pipe Fittings & Flanges*

INDUSTRIAL FITTINGS

The range of industrial Hose Fittings and ccessories from Fleximeer has been developedm for optimum performance and best value, Utilising Fleximeer extensive manufacturing knowledge.

With a long history of constant evaluation testing and application, Fleximeer assures its customers that the products supplied by Fleximeer have been tried and tested in many local industrial and provide to be versatile and cost effective.


OVERVIEW

The range of metallic SS hose from Fleximeer has been developed for optimum performance and best value.

All matellic hose from Fleximeer is:

• stored in a dust free and air-conditionedenvironment

• supported by Mill or material certification

• manufactured to specific internationalstandards

• assembled and tested to customerrequirement from semi-finished product.

• Available on ex stock delivery

HOSE SELECTION

Application

Hose selection is governed by varies factors including flow rate, maximum operating pressure, and type of media, temperature and movement.

Operating pressure

Fleximeer supplied hoses are rated for continuous operation at the maximum operating design pressure. However de-rating factors must be applied in high temperature applications.

The operating pressure is normally one-fourth of the hose minimum burst pressure.

Chemical Resistance

Compatibility of tube material can be checked against Compatibility Charts for basic guidance on selection.

End Fittings

A comprehensive range of industrial end fittings is available from Fleximeer for termination of metallic hoses by Argon TIG Welding or Silver Soldering. Customers end fittings can also be reused in some cases. Pressure/leak test is carried out as a matter of course.

STAINLESS STEEL HOSES

With over 8 years of experince in assembly and best test of hoses , Fleximeer can provide quality assured assemblies every time.


OVERVIEW

The range of Accessories from Fleximeer has been developed for optimum performance and best value, utilising Fleximeer extensive manufacturing knowledge.

Accessories supplied from Fleximeer and its service centres are of the best quality and provide for a broad range of applications.

All accessories from Fleximeer are:

� Stored in a dust free and air-conditioned environment.

� supplied in bulk or a one offrequirement

PRODUCT RANGE

�

�

�

HP Ball Valves

�

�


�

�

�




OVERVIEW







PRODUCT RANGE



HP Ball Valves

HP Needle Valves



Whip Checks


Spiral Hose Guard



Equipment




ACCESSORIES

Dowty Washers


Spiral Hose Guard



Equipment Crimping Machine

Seamless Tube CS & SS





OVERVIEW







PRODUCT RANGE



HP Ball Valves

HP Needle Valves



Whip Checks


Spiral Hose Guard



Equipment




Shareef M AL-Shubbar Oil Services Est. Safwa & Dammam - Saudi Arabia

Tel: +966 55 0920 333 , +96654 3922 866 E-mail: [email protected]

www.fleximeer.com


Date post:	13-Apr-2017
Category:	Sales
Upload:	bilal-moushawrab
View:	88 times
Download:	0 times

Fleaximeer Start to Finish

Sales