Versatile label application Label application to front or side of products
Apply to a range of surfaces Easy label application to uneven or even surfaces, from shrink wrapped to corrugate substrates
Highest throughput Label over 90 products per minute in more demanding front of pack applications
Close pack spacing 250mm pack spacing at the highest speed
Automatic compensation Adapts to changes in product type or production speed with minimal or no operator intervention required
Production FlexibilityCapable of complying with your most demanding labelling requirements
Easy to use, hard to get wrong Single user interface with simple three button operation
Reduced touch time, increased line efficiency Simple label and ribbon web path means less than 40 seconds to change media roll increasing production uptime
Fully integrated design Simple design means operators only require 5 minutes to be fully competent
Operational FlexibilityOur solution simplifies and reduces the demand for operator interaction
No need to turn packs, or introduce production risks Front or side label application from a single applicator, even in the most challenging circumstances
Seamless integrationSmall footprint reduces need to change conveyors and the cost to install
Suits all applications Install from the side or above, using one of three arm lengths for maximum speed or the longest application reach
CoLOS integrationFull product data integrity, connected to your ERP
Integration FlexibilityDesigned to allow simple integration, minimizing production line changes
Redefine the possiblesm
FLEXIBLE GS1COMPLIANT LABELINGFlex se
Print and Apply
Labels can be applied to a variety of surfaces
Print features• Print methods: Thermal transfer or direct thermal• Print engines:
- 2420: 104 mm, 200 dpi (8 dots per mm) - 2430: 108 mm, 300 dpi (12 dots per mm) - 2620: 168 mm, 200 dpi (8 dots per mm) - 2630: 162 mm, 300 dpi (12 dots per mm)
• Maximum print speed: 300 mm/s• Support for TrueType and Unicode fonts and all major graphics formats• All major linear barcodes and 2D barcodes supported• Expanded memory SD card slot
We reserve the right to amend the design and/or specifications of our products without notice.
To learn more, visit www.markem-imaje.co.uk
M Pack LtdUnit F4South City Busines parkTallaghtDublin D24 PD91T: 00353 1 2890077E: [email protected]
®
Pho
tos:
Al K
arev
y P
hoto
grap
hyA
1
Flex SE - Specifications
Operation• Inbuilt simple user interface with graphic display and machine status in
26 languages• Simple on-board User Interface: Three button control start, pause, print with
capability of label selection and maintenance functions• Optional interfaces including 15” colour touch screen industrial interface
with multiple machine control and ERP connectivity
Operational characteristics • Operating range; 5-45 ºC, 20 to 85% non-condensing • Power requirements: 110/240 VAC; 50/60 Hz • Air supply: 6 bars, dry and clean
Conforms to ANSI/UL Std. 60950-1
Code with CONFIDENCEsm – Ensure excellent performance
and peace of mind with our array of genuine Markem-Imaje
after-sales services. Offerings include spare part kits, consumables
solutions and service packages including start-up packages,
extended warranty contracts, service exchange programs and
all-inclusive agreements. With Markem-Imaje you redefine your
production possibilities.
123456
123456
A
B
C
D
A
B
C
D
This
doc
umen
t is
Mar
kem
-Imaj
e's
prop
erty
and
can
not b
e co
mm
unic
ated
with
out w
ritte
n au
thor
izat
ion
1337
550
1740
890
897 - NOTE!THIS DIMENSION IS FOR A 150 WIDEPAD FITTED TO A MEDIUM ARM, ITVARIES FOR OTHER COMBINATIONS.PLEASE ASK FOR EXACT DIMENSION.
0A
0C
0A0B
986
Approved:
ABVerifier: REDRAWN FROM ORIGINAL DRAWING PROVIDED BY IIC WITH ADDITIONAL NOTES PAV-3332
Author: DAVID TROMAN
Date: 05/06/2015 Modification description: Rev. CR
This
Dra
win
g A
4892
4-.0
TR
UE
use
s M
odel
A48
924-
.0 T
RU
E
FIRST ANGLEPROJECTION
Status: Designer:DAVID TROMAN
Cr/Co: PAV-3332 Creation date:04.JUN.2015
- Rohs compliant according to 2011/65/EU & 2003/11/CE
General tolerances: Description: DIMENSIONAL DRAWING FOR L.H. HSFLEX±5.0mmSurface roughness: Treatment:
N/A N/ASurface finish: Material:
N/A N/AScale: Format: Units: mm Mass: Drawing No. Rev.
1/20 A3 Sheet: 1 / 1 N/A A48924 AB
DIMENSIONS FOR DETAIL VIEWS0A 0B 0C
SHORT 10 115 65MEDIUM 75 180 130LONG 120 225 175
3D VIEW OF TOTAL ASSEMBLYPAD HOME CONDITION
PAD HOME CONDITION
PAD HOME CONDITION
PAD APPLY CONDITION
PAD APPLY CONDITION
SECTION B-B
DETAIL B
SECTION A-A
DETAIL A
DETAIL ASCALE 3/20
PAD HOME CONDITION
DETAIL BSCALE 3/20
PAD APPLY CONDITION
123456
123456
A
B
C
D
A
B
C
D
This
doc
umen
t is
Mar
kem
-Imaj
e's
prop
erty
and
can
not b
e co
mm
unic
ated
with
out w
ritte
n au
thor
izat
ion
1337
550
1740
890
897 - NOTE!THIS DIMENSION IS FOR A 150 WIDEPAD FITTED TO A MEDIUM ARM, ITVARIES FOR OTHER COMBINATIONS.PLEASE ASK FOR EXACT DIMENSION.
0A
0C
0A0B
986
Approved:
ABVerifier: REDRAWN FROM ORIGINAL DRAWING PROVIDED BY IIC WITH ADDITIONAL NOTES PAV-3332
Author: DAVID TROMAN
Date: 05/06/2015 Modification description: Rev. CR
This
Dra
win
g A
4892
4-.0
TR
UE
use
s M
odel
A48
924-
.0 T
RU
E
FIRST ANGLEPROJECTION
Status: Designer:DAVID TROMAN
Cr/Co: PAV-3332 Creation date:04.JUN.2015
- Rohs compliant according to 2011/65/EU & 2003/11/CE
General tolerances: Description: DIMENSIONAL DRAWING FOR L.H. HSFLEX±5.0mmSurface roughness: Treatment:
N/A N/ASurface finish: Material:
N/A N/AScale: Format: Units: mm Mass: Drawing No. Rev.
1/20 A3 Sheet: 1 / 1 N/A A48924 AB
DIMENSIONS FOR DETAIL VIEWS0A 0B 0C
SHORT 10 115 65MEDIUM 75 180 130LONG 120 225 175
3D VIEW OF TOTAL ASSEMBLYPAD HOME CONDITION
PAD HOME CONDITION
PAD HOME CONDITION
PAD APPLY CONDITION
PAD APPLY CONDITION
SECTION B-B
DETAIL B
SECTION A-A
DETAIL A
DETAIL ASCALE 3/20
PAD HOME CONDITION
DETAIL BSCALE 3/20
PAD APPLY CONDITION
1
2
3
4
5
6
1
2
3
4
5
6
A
B
C
D
A
B
C
D
This
doc
umen
t is
Mar
kem
-Imaj
e's
prop
erty
and
can
not b
e co
mm
unic
ated
with
out w
ritte
n au
thor
izat
ion
1337
550
1740
890
897 - NOTE!
THIS DIMENSION IS FOR A 150 WIDE
PAD FITTED TO A MEDIUM ARM, IT
VARIES FOR OTHER COMBINATIONS.
PLEASE ASK FOR EXACT DIMENSION.
0A0C
0A0B
986
Approved:
AB
Verifier:
REDRAWN FROM ORIGINAL DRAWING PROVIDED BY IIC WITH ADDITIONAL NOTESPAV-3332
Author:DAVID TROMAN
Date:05/06/2015
Modification description:
Rev. CR
This
Dra
win
g A4
8924
-.0 T
RU
E us
es M
odel
A48
924-
.0 T
RU
E
FIRST ANGLE
PROJECTION
Status:
Designer:
DAVID TROMAN
Cr/Co: PAV-3332Creation date:
04.JUN.2015
- Rohs compliant according to 2011/65/EU & 2003/11/CE
General tolerances:
Description: DIMENSIONAL DRAWING FOR L.H. HSFLEX
±5.0mm
Surface roughness:
Treatment:
N/A
N/A
Surface finish:
Material:
N/A
N/A
Scale: Format:
Units: mm Mass:Drawing No.
Rev.
1/20A3 Sheet: 1 / 1
N/A
A48924 AB
DIMENSIONS FOR DETAIL VIEWS
0A
0B
0C
SHORT
10
115
65
MEDIUM
75
180130
LONG
120225
175
3D VIEW OF TOTAL ASSEMBLY
PAD HOME CONDITION
PAD HOME CONDITION
PAD HOME CONDITION
PAD APPLY CONDITION
PAD APPLY CONDITION
SECTION B-BDETAIL B
SECTION A-ADETAIL A
DETAIL A
SCALE 3/20
PAD HOME CONDITION
DETAIL B
SCALE 3/20
PAD APPLY CONDITION
DIMENSIONS FOR DETAIL VIEWS
0A 0B
SHORT 10 115
MEDIUM 75 180
LONG 120 225
Communication & connectivity • High speed RS-232, 300 – 115 200 bps • Ethernet 10/100 (LPD, R Telnet, FTP, web server) • USB for back-up/restore and label upload via user interface • Programmable I/O
Software • Compatible with CoLOS Create Professional, Enterprise and
Traceability software
Applicator characteristics• Available in three application lengths• Application on side, front, side and front• Flat or uneven surfaces• Label width: 40-150 mm• Label length: 40-120 mm• Application rate up to 90 products per min in front apply mode• Inter product gap 250 mm min in front apply mode• Application accuracy 1mm• Handed to suit application and product direction • Can be mounted along, across or transverse the conveyor• Line independent automatic speed sensing for variable speed conveyors• Label detection logic minimising mess and increasing application security• Operator safe therefore no guarding required
Media Specification• Media types: Die-cut self-adhesive labels• Label stock outside wound as standard• Maximum label roll: 350 mm• Inner core: 76 mm• Inside wound thermal transfer ribbon• Ink ribbon length: 560/660 m or optional 800 m for direct thermal operation• Ribbon core: 25 mm
Options & accessories• Inside wound label kit• Three-color-status beacon• Barcode reader• Range of industrial stands/mounting