1
SPECTRA MATF15D eFT COLUMBIA CHEMICAL CORPORATION Phone: (330) 225-3200 www.columbiachemical.com E-mail: [email protected] Columbia Chemical Corp. introduces SpectraMATEiIl 150 CFT, a thick-film trivalent chromate for zinc-plated parts with new Cobalt-Free Technology. Developed to eliminate the expense and environmental hazard of cobalt, the new product provides a slight iridescent, multicolor finish while offering superior paint and powder adhesion. SpectraMATEiIl 150 CFT is economical to operate and also equates to a proactive stance on the anticipated RoHS regulations banning cobalt. SpectraMATEiIl 150 CFT consistently exceeds 150 hours of neutral salt spray testing to white corrosion, without topcoats. A one-part system with an extensive bath life, SpectraMATEI!l 150 CFT is easy to use and maintain in both rack and barrel operations. Contact your regionaL MetaL Finishing saLes rep today! RESERVE YOUR SPACE NOW FOR THE FAll 2010 METAL FINISHING PRODUCT NEWS, WHICH Will RECEIVE BONUS DISTRIBUTION AT THE NAI COATINGS SHOW IN INDIANAPOLIS IN OCTOBER. The original "drop-in" tank liner. Lining tanks that contain corrosive chemicals is one of the most cost-effective methods for a metal fin- isher to prolong and maximize asset life and ensure continuous operation of the line. Whether for large chromium plating tanks or small electroless nickel tanks, Flexi-Liner will identify and fabricate the right liner for your operation. Flexi-liners are designed for easy self-installation. They actually "drop in" your tank and can be installed in just minutes. Phone: (800) 423-4909 Fax: (800) 356-4686 E-mail: [email protected] FLEXI-liNER www.flexi-liner.com A BRITE COMPANY www.abrite.com Phone: (214) 291-0400; (888) 8ABRITE Fax: (214) 291-0300 E-mail: [email protected] TRIDIP CR-3 and TRIDIP CR-4 are specially formulated, one-component liquid trivalent chromate conversion coating products for cyanide, alkaline non-cyanide, chloride, zinc/iron, and zinc/cobalt electrodeposited zinc surfaces. It brightens and passivates most zinc surfaces. Unlike competitive products that leave a bland clear or iridescent finish, Tridip CR products leave a very attractive pronounced blue hue. TRIDIP CR-3, when properly applied, provides a finish that withstands 96-120 hours of salt spray without topcoat. TRIDIP CR-4, when properly applied, provides a finish that withstands up to 250 hours of salt spray without topcoat. Northeast/East Coast Eric CuLLen, Account Manager Huson International Media Phone: (212) 268-3344 Fax: (212) 268-3355 E-mail: [email protected] MOLECTRICS www.molectrics.com Molectrics Phone: (216) 641-0090 Fax: (216) 641-1337 E-mail: [email protected] Electropolishing equipment. Capabilities include uniformity & controlled metal removal 0.0002. keeping original part dimen- sions within blueprint tolerances during elec- tropolishing. Electropolishing is available for stainless steel castings, forgings, stampings & tools. Other materials worked with include monel. incalloy, copper and others. Midwest/West Coast Arnie Hoffman, President Hoffman & Edman, LLC Phone: (847) 559-0909 Fax: (847) 559-0911 E-mail: [email protected] 76 Summer 2010 I MFPN I www.metalfinishing.com
