ZUWA-Zumpe GmbHFranz-Fuchs-Str. 13-17D-83410 Laufen
Phone: +49 8682 8934-50Fax.: +49 8682 8934-850E-Mail: [email protected]
QUALITY
SINCE 1946
Flexible Impeller Pumpsone design - three types
Unistar - ComBistar - nirostar
Page 2
All data, descriptions, photos, images and dimensions of the entire brochure are non binding and shall be used for visualisation only. We reserve the right for amendments and can not be held liable for printing errors.
ZUWa-Zumpe GmbHThe family run enterprise ZUWA-Zumpe GmbH has been manufacturing high quality pumps and innovative pump systems for more than 65 years. The ample experience in designing and producing high end products enables us to offer a wide range of different devices.
The entire product range consisting of pumps, fuelling stations, plant protection systems as well as charging and fl ushing stations is in high demand all over the world. ZUWA is working in accordan-ce with the ISO 9001:2008 quality management system, regularly controlled by TÜV SÜD. Process safety and constant quality is guaranteed.
The close contact with our customers provides us with proposals and impulses to improve and further develop our products. In house production and shop fl oor enable us to meet customer specifi c require-ments, manufacture custom made products and complete repair jobs. Competent contact persons and lean ma-nagement make for quick and reliable service.
Contents
Content Page
1. Function and advantages 32. Pump types (Function and differences) 43. Materials 54. Versions and Drive Systems 65. UNISTAR 86. COMBISTAR 107. NIROSTAR 118. Frequency converter 149. Accessories 1610. Special applications 18
Page 3
► Dry self primingWhat makes impeller pumps outstanding – they do not need to be fi lled prior to operation. Impeller pumps are dry self priming from a depth of three meters. Pre-fi lling is required for a suction depth of three metres and more. The suction depth is max. 7 metres.
► High capacityDepending on type and model our pumps are capa-ble of transferring from between 3 litres up to 730 litres per minute. Tanks will be drained down to the last drop.
► VersatileUseful for many different fl uids and applications. Mate-rials of impellers, seals and pump housings can be se-lected according to the individual needs and applications required. ZUWA Impeller Pumps are available with AC and DC motors with various revolutions per minute.
► GentleFluids are transferred absolutely free of pulsation.
Smaller amounts of air or other gaseous fl uids can be handled on the suction side.
► reliable All pumps are tested for contiuous operation in our work-shop. Top quality materials guarantee for a long durabi-lity.
► Easy maintainingFor cleaning and maintenance work the pumps are quickly and easily disassembled. Replacement parts can be ordered individually. Low operation costs!
► sturdyImpeller pumps will readily pump fl uids with a wide ran-ge of viscosity, even highly viscous liquids such as oil or honey (up to 20 000 mPAS) as well as liquids containing solids.The approved media temperature is max. 90°C. A short dry-run of up to one minute can be tolerated.
the advantages of an impeller pump
impeller Pump
1. Function / Advantages
Principles of operationFlexible impeller pumps are displacement pumps. The rotor with fl exible vanes is mounted concentrically in a circu-lar housing which has a fl attened area at one side. This provides the eccentric path for the impeller, thereby squee-zing the fl exible blades on this side.
1. suction:The impeller rotation and the straightening of the vanes upon lea-ving the cam creates a vacuum on the suction side drawing the fl uid into the pump chamber.
2. transfer:The rotating impeller transfers the liquid from the inlet to the outlet port of the pump.
3. Press:On the pressure side the impeller vanes are compressed and the fl uidis discharged constantly from the pump.
1. 2. 3.
Page 4
Unistar A multi-purpose pump designed for transferring clean or contaminated liquids. Not suitable for handling ab-rasive or corrosive fl uids.
ComBistarThis pump is particularly suitable for all fl uids containing abrasives. It is an economic alternative to the NIROSTAR series for transferring abrasive or slightly corrosive fl uids.
nirostarA high quality stainless steel pump with numerous applications in indus-trial plants and production facilities, the appropriate choice for transfer-ring corrosive fl uids.
Pump types
nBr /acrylonitrile-Butadiene-rubber (Perbunan®, Buna-n®):for water, antifreeze, heat transfer fl uid, vegetable oil and grease high impact elasticity and good me-chanical strength good for applications involving high pressures up to max. 5 bar
EPDm /Ethylene-Propylene-Diene-rubber (Keltan®, Buna EP®):for high temperatures, for acids and bases. high elasticity and very good mechanical stability
Cr /Chloroprene-rubber (neoprene®, Bayprene®):preferably used for applications in the food industry.fl ame retardant, tearproof, durable
FKm or FPm /Fluor-rubber (Viton®, Fluorel®): for oil, diesel, fuel oil, palm oil, soy bean oil and oil emulsive wood preservatives very good chemical resistance, less mechanical resistance
Plasticfor water, mineral and vegetable oils, diesel fuel, heat transfer fl uid and several chemicals extremely tear resistant and good mechanical resistance (not suitable for abrasive fl uids) maximum fl uid temperature 60°C
impeller wheel type A in full scale: Ø 56 mm
Where impeller Pumps are being used► electroplating► biotechnology► heating and sanitary► workshop, machine shop► agriculture and horticulture► food and beverage industry► boating, marine engineering► water and sewerage treatment ► manufacturing, industrial plants and construction► chemical, pharmaceutical and cosmetics industry
Thermoplastic impeller
2. Pump types
For all applications the right material of impeller
Uni-, ComBi- and nirostar
Page 5
= standard, = not available
* For UNISTAR and COMBISTAR: to protect the aluminium pump covers the pump chamber is sealed with stainless steel discs (AISI 316).
3. Materials
Unistar 2000-a, B and C 2001-a, B and CPump housing AlMgSi1
Pump cover* AlMgSi1
Pump shaft AISI 430 F AISI 316 L
Rotary shaft seal Impeller wheel: NBR, EPDM, FKM, CR, Plastic optional optional
ComBistar 2000-a and B 2001-a and BPump housing AISI 316 L
Pump cover* AlMgSi1
Pump shaft AISI 430 F AISI 316 L
Rotary shaft seal Impeller wheel: NBR, EPDM, FKM, CR, Plastic optional optional
nirostar 2000-a and B 2000-C, D, E and F 2001-D, E and F 2001-a and B
Pump housing AISI 316 L C = AISI 316, D-F = AISI 304 AISI 316 L
Pump cover* AISI 316 L C = AISI 316, D-F = AISI 304 AISI 316 L
Pump shaft (directly flanged) AISI 430 F AISI 304 AISI 316 L
Pump shaft (with pump carrier) AISI 316 L
Rotary shaft seal Floating shaft seal Impeller wheel: NBR - Perbunan® EPDM - Keltan® optional optional optional
FKM - Viton® optional optional
CR - Neoprene® optional optional optional
Plastic optional optional
Page 6
ZUWA Impeller Pumps are availa-ble with electric motors of variousspecifi cations. The pump casing caneither be directly fl anged to the motor or is connected via a specialadapter housing.
4. Versions and Drive Systems
Electrically driven pumps
Electric motors
It is possible to pump in both direc-tions by reversing rotation: tanks can be drained and fi lled easily without changing hoses.
The pumps of series A and B can be
Bidirectional motor
Handy and extremely light pump of series 2001-A with a powerful pneumatic drive, especially made for garages where compressed air is available.
Pneumatic motor
Carrier to connect pumps with standardized motors with installation size M71 B3/B14.
Pump carrier
► single or two stage► variably adjustable
Gear motor
Hydraulic motor for connection to hydraulic systems of commercial vehicles.
Hydraulic motor
Drives are available as follows:
► 230 Volt AC► 400 Volt AC► 12 or 24 Volt DC directly
fl anged
with pump carrier
with rotary switch
withpneumatic motor
mounted to a bidirectional motor on option. For the pumps of series C to F a bidirectional motor is standard equipment.
The pump is fi xed in a similar way as with the drill adapter and depth stop (see next page).
with Hydraulic motor
single or two stagevariably adjustable
with gear motor
Page 7
example for application with regraded support (optional accessory)
All ZUWA impeller pumps are also available without electric motors, enabling the pump to be connected to any type of alternative drive unit.
Drive options:► power drill► V-belt drive► gear motor► hydraulic motor► pneumatic drive
with V-belt pulley
transmission for V-belt driveTransmission with 24 mm stainless steel shaft (AISI CA 6 NM) for pulley carrier.The motor shaft is mounted with a double angular ball bearing and is fi xed by the bearing housing. Thereby the axial forces barely affect the pump shaft and abrasion is minimized.
pump with transmission
1. with drill adapterThe adapter fi xes the pump with the depth stop.
2. with regraded support and mounting feet The pump is mounted to a regraded support along with the drill (the support is not part of the standard equipment).
Adapter and regraded support separately availble for back fi tting.
UNISTAR 2001-A
4. Versions and Drive Systems
Pumps without drive units
Drill driven impeller Pumps
+adapterpump
example for application with adapter and cordless screwdriverexample for application with
The pump series 2001-A and 2001-B are ideally driven with a drill. The shaft can easily be fi xed to the chuck of each regular electric or cordless drill and screwdriver.
The pump is available in two versions:
Page 8
40
30
20
10
00 10 20 30 40 50 60
0 0,6 1,2 1,8 2,4 3,0 3,6 4,2
70 80 90
4,8 5,4
100
6,0
50
70
60
fl ow rate in l/min
pum
p he
ad in
mfl ow rate in m³/h
applications► fi lling solar collectors► irrigation► rain water harvesting► domestic water supply► drain fl ooded basements► decanting barrels► sewerage disposal► fuelling vehicles► draining waste oil► dispose off cooling lubricants► draining water beds► car wash► cleaning tanks► draining tanks
Fluids► water, seawater► waste water► diesel fuel, biodiesel► vegetable oils► heating and motor oil► detergents► antifreeze► heat transfer fl uid► cooling lubricants
UNISTAR 2000-Cbidirectional motor as standard
UNISTAR 2000-A/-B
* with Perbunan-Impeller
A multi-purpose pump designed for transferring clean or contaminated fl uids without abrasive particles (suitable for all non corrosive and non abrasive fl uids).
Types A with 1400 rpmTypes A with 2850 rpmTypes B with 1400 rpmTypes B with 2850 rpmTypes C with 2850 rpm
5. UNISTAR
2000-a | 2000-B | 2000-C
Unistar 2000-a 2000-B 2000-CFlow rate max. 30 l/min 60 l/min 90 l/min
Pressure max. 5 bar* 5 bar* 5 bar*
connections ¾“ 1“ 1¼“
Volt 230 400 12 24 230 400 12 24 230 400
rpm
1.40
0
2.80
0
1.40
0
2.80
0
1.50
0
3.00
0
1.50
0
3.00
0
1.40
0
2.80
0
1.40
0
2.80
0
1.50
0
3.00
0
1.50
0
3.00
0
2.80
0
Ampere 3,2 2,1 1,9 39 42 12 18 4,4 4 2,8 2,4 50 49 23 8,8 2,7motor power 0,37 kW 0,25 kW 0,55 kW 0,37 kW 1,1 kWtemperature max. 90°C 90°C 90°Cweight 9 kg 9,2 kg 13 kg
technical details
Characteristic curves:
Page 9
UNISTAR 2001-A/-B UNISTAR 2001-C with transmissionUNISTAR 2001-A, for example with cordless screwdriverUNISTAR 2001-A, for example
applications► refi ll solar collectors► irrigation► rain water harvesting► domestic water supply► drain fl ooded basements► decanting barrels► draining waste oil► sewerage disposal► fuelling vehicles► car wash► draining water beds► draining aquariums► dispose off cooling lubricants► bilge pump► booster pump
Fluids► water, seawater► waste water► diesel fuel, biodiesel► vegetable oils► heating and motor oil► detergents► antifreeze► heat transfer fl uid► cooling lubricants
5. UNISTAR
2001-a | 2001-B | 2001-C
Unistar 2001-a 2001-B 2001-CFlow rate max. 30 l/min 60 l/min 90 l/min
Pressure max. 4 bar 4 bar 4 bar
connections ¾“ 1“ 1¼“
minimum drive power 500 W 700 W 1.400 W
rpm 2.900 2.900 2.900
temperature max. 90°C 90°C 90°Cweight* 0,6 kg 0,8 kg 2,4 kg
technical details
Unistar without drive unit
* without v-belt pulley
Additional information on these products is available in our detailed brochure for Drill Driven Pumps (sent to you on request) or can be downloaded from www.zuwa.de
Page 10
COMBISTAR 2000-A/B
COMBISTAR 2001-A/B
applications► cleaning machines► oil disposal► whitewashing stables► draining tanks► cleaning tanks► galvanizing tanks► draining waste oil► dispose off cooling lubricants
Fluids► descaler► grinding emulsions► coolant► lime water► diluted soluble oil► galvanising sludge► waste oil► cooling lubricants
This pump is particularly suitable for all fl uids containing abrasives. All components getting in contact with the me-dium are made of stainless steel. It is an economic alternative to the NIROSTAR series for transferring abrasive or slightly corrosive liquids.
40
30
20
10
00 10 20 30 40 50 60
0 0,6 1,2 1,8 2,4 3,0 3,6 4,2
70
50
70
60
fl ow rate in l/min
pum
p he
ad in
m
fl ow rate in m³/h
Types A with 1400 rpmTypes A with 2850 rpmTypes B with 1400 rpmTypes B with 2850 rpm
technical detailsComBistar 2000-a 2000-B 2001-a 2001-BFlow rate max. 30 l/min 60 l/min 30 l/min 60 l/min
Pressure max. 5 bar* 5 bar* 4 bar
connections ¾“ 1“ ¾“ 1“
Volt 230 400 12 24 230 400 12 24
COMBISTARwithout drive unit
rpm
1.40
0
2.80
0
1.40
0
2.80
0
1.50
0
3.00
0
1.50
0
3.00
0
1.40
0
2.80
0
1.40
0
2.80
0
1.50
0
3.00
0
1.50
0
3.00
0
Ampere 3,2
2,1
1,9
39 42 12 18 4,4 4 2,8
2,4
50 49 23
motor power 0,37 kW 0,25 kW 0,55 kW 0,37 kWtemperature max. 90°C 90°C 90°Cweight 9,4 kg 10 kg 1 kg 1,6 kg
* with Perbunan-Impeller
6. COMBISTAR
2000-a | 2000-B | 2001-a | 2001-B
Characteristic curves:
Page 11
applications► delivering► fi ltering► dosing► decanting► draining
Fluids► Food, drinks► mash► chemicals, acids, bases► liquid fertilizers► dyes, glues► vegetable oils► cooling lubricants► fi re fi ghting foam agents
A high quality stainless steel pump with numerous applications in industrial plants and production facilities, the appro-priate choice for transferring corrosive fl uids. Frequently used in food and beverage industry.
40
30
20
10
00 10 20 30 40 50 60
0 0,6 1,2 1,8 2,4 3,0 3,6 4,2
70
50
70
60
fl ow rate in l/min
pum
p he
ad in
m
fl ow rate in m³/h
Types A with 1400 rpmTypes A with 2850 rpmTypes B with 1400 rpmTypes B with 2850 rpm
NIROSTAR 2000-A/B
technical detailsnirostar 2000-a 2000-B 2001-a 2001-BFlow rate max. 30 l/min 60 l/min 30 l/min 60 l/min
Pressure max. 5 bar* 5 bar* 4 bar
connections ¾“ 1“ ¾“ 1“
Volt 230 400 12 24 230 400 12 24
NIROSTAR without drive unit
rpm
1.40
0
2.80
0
1.40
0
2.80
0
1.50
0
3.00
0
1.50
0
3.00
0
1.40
0
2.80
0
1.40
0
2.80
0
1.50
0
3.00
0
1.50
0
3.00
0
Ampere 3,2
2,1
1,9
39 42 12 18 4,4 4 2,8
2,4
50 49 23
motor power 0,37 kW 0,25 kW 0,55 kW 0,37 kWtemperature max. 90°C 90°C 90°Cweight 9,8 kg 10,4 kg 1,5 kg 2 kg
* with Perbunan-Impeller
7. NIROSTAR
2000-a | 2000-B | 2001-a | 2001-B
NIROSTAR 2001-A/BNIROSTAR 2001-A/B
NIROSTAR 2000-A/B
1) For more information about the Star Handles - Page 16
1)
1)
Characteristic curves:
Page 12
applications► clean tanks► cleaning ponds► delivering► fi ltering► dosing► decanting► draining
Fluids► heating oil, diesel fuel► food, drinks► mash► chemicals► acids► bases► liquid fertilizers► dyes, glues► vegetable oils► surface treatment► cooling lubricants► fi re fi ghting foam agents► concrete admixtures
NIROSTAR 2000-C NIROSTAR 2000-D NIROSTAR 2001-D
* bidirectional motor
ConnectionsOn request available with following pipe fi ttings: BSP male thread, hygi-enic connection acc. to DIN 11851, Garolla fi tting, SMS fi tting, BSM (RJT) fi tting and further optional connections.
7. NIROSTAR
2000-C | 2000-D | 2001-D
nirostar C - F
technical detailsnirostar 2000-C* 2000-D* 2001-DFlow rate max. 96 l/min 166 l/min 115 l/min
Pressure max. 3 bar 3 bar 3 bar
connections 1¼“ 1½“ 1½“
Volt 230 400 24 230 400
NIROSTARwithout drive unit
rpm 900 1.400 900 1.400 900 900
900
1.40
0
Ampere 5 7,1 1,7 2,1 30 13 4,1 3,8
motor power 0,56 kW 0,75 kW 0,56 kW 0,75 kW 0,56 kW 1,5 kW
temperature max. 90°C 90°C 90°C
weight 15 kg 20 kg 4,5 kg
Page 13
1,2 8,47,26,04,83,62,4 9,6 11
fl ow rate in l/min
pum
p he
ad in
m
fl ow rate in m³/h
Type C with 900 rpmType C with 1400 rpmType D with 900 rpmType D with 1400 rpm
NIROSTAR 2000-E NIROSTAR 2000-Fwith frequency converter and dry run protection on trolley
fl ow rate in l/minpu
mp
head
in m
fl ow rate in m³/h
Type E with 470 rpmType E with 700 rpmType E with 900 rpmType F with 470 rpmType F with 600 rpm
NIROSTAR 2001-F
7. NIROSTAR
2000-E | 2000-F | 2001-E | 2001-F
technical details
nirostar C and D nirostar E and F
* bidirectional motor
nirostar 2000-E* 2000-F* 2001-E 2001-FFlow rate max. 375 l/min 730 l/min 375 l/min 730 l/min
Pressure max. 2 bar 2 bar 2 bar
connections 2“ 3“ 2“ 3“
Volt 400 400
NIROSTARwithout drive unit
rpm 470 700 900 470 600
Ampere 6 6 5,5 9,5 8,2
motor power 1,12 kW 1,5 kW 1,87 kW 3,3 kW 3,5 kW
temperature max. 90°C 90°C 90°C
weight 30 kg 69 kg 8,5 kg 14,5 kg
Characteristic curves:
Page 14
integrated or external to be assembled in a switching cabinet
Characteristic curves for Pumps with frequency converter:
Variable fl ow rateFlexible fl ow rate controlled by a frequency converter – the exact fl ow rate can be adjusted when pump is used for fi lling or dosing.The rotation of the impeller can be reversed if required.
fl ow rate in l/min
pum
p he
ad in
m
0 5 10 15 20 25 300
0 0,3 0,6 0,9 1,2 1,5 1,8
10
20
30
40
60
50
2850 U/min
2000 U/min
1400 U/min
300 U/m
in
800 U/min
fl ow rate in m³/h
typen 2000-a
fl ow rate in l/min
pum
p he
ad in
m
0 10 20 30 40 50 600
0 0,6 1,2 1,8 2,4 3,0 3,6
10
20
30
40
60
50
300 U/min
2000 U/min
2850 U/min
800 U/min
1400 U/min
fl ow rate in m³/h
typen 2000-B
0 10 20 30 40 50 60
10
20
70 80 90 100
40
30
600,6 1,2 1,8 2,4 3,0 3,6 4,2 4,8 5,4 6,00
0
50
300 U/m
in
800 U/m
in
1400 U/min
2000 U/min
2800 U/min
fl ow rate in l/min
pum
p he
ad in
m
fl ow rate in m³/h
Unistar 2000-C
Features► reversion of rotation► overload protection► precise drive► compact design
8. Frequency Converter
300 rpm
800 rpm
1400 rpm
2000 rpm
2850 rpm
300 rpm
800 rpm
1400 rpm
2000 rpm
2850 rpm300 rpm
800 rpm
1400 rpm
2000 rpm
2850 rpm
Page 15
integrated frequency converter:
Externalfrequency converter:
fl ow rate in l/min
pum
p he
ad in
m
0 10 20 30 40 50 60
4
8
12
16
70 80 90 100
28
20
24
320,6 1,2 1,8 2,4 3,0 3,6 4,2 4,8 5,4 6,00
0
180 U/min
600 U/min
900 U/min
1400 U/min
fl ow rate in m³/h
nirostar 2000-C
fl ow rate in l/min
pum
p he
ad in
m
0 100 200 300 400 500 600
4
8
12
16
20
700 800
6 12 18 24 300 48
0
36 42
50 U/min
150 U/min
300 U/min
470 U/min
600 U/min
fl ow rate in m³/h
nirostar 2000-F
fl ow rate in l/min
pum
p he
ad in
m
0 20 40 60 80 100 120
4
8
12
16
20
24
28
0
1,2 2,4 3,6 4,8 6,00 7,2
50 U/min175 U/m
in
350 U/min
700 U/min
900 U/min
fl ow rate in m³/h
nirostar 2000-D
fl ow rate in l/min
pum
p he
ad in
m
0 50 100 200 250 300 350
4
8
12
16
20
400
3 6 9 12 150 24
0150
18 21
50 U/min
175 U/min350 U/min
700 U/min
900 U/min
fl ow rate in m³/h
nirostar 2000-E
8. Frequency Converter
180 rpm
600 rpm
900 rpm
1400 rpm
50 rpm175 rpm
350 rpm
700 rpm
900 rpm
50 rpm
150 rpm
300 rpm
470 rpm
600 rpm
50 rpm
175 rpm350 rpm
700 rpm
900 rpm
Page 16
Impeller pumps can be equipped with a dry run protec-tion. A sensor switch interrupts the power supply before overheating. Easy retrofi tting of existing pumps.
9. Accessories
Dry run protection
The pressure switch shuts off the pump when reaching a preset pressure level. As soon as the pressure drops again by 30% the pump automatically starts anew. Device just works with 400 V motor.► Switching pressure: adjustable from 1-10 bar► Material: stainless steel or brass
Pressure switch
Carrying handle with rubber pads - convenient transport for all impeller pumps of the series 2000 (except for NIROSTAR 2000-E and NIROSTAR 2000-F).
Carrying handle
A useful tool to install the impeller easily into the casing. Suitable for all ZUWA impellers type A and B
tool for changing the impeller
adjusted to a specifi c quantity. The fl ow meter is inte-grated in the housing.► Flow rate: 8 - 30 l/min or 10 - 40 l/min► Connection: 2 x 1“ male thread► operating pressure max.: 10 bar► Material: brass (approved for drinking water)
Flow control
For easy opening of the pump by hand without using tools. For this operation it is not necessary to remove the pump from its installed position. This provides an easy access for cleaning, inspection and maintenance. (for NIROSTAR A and B)
For easy opening of the pump by hand without using
star handles
Page 17
For frequency converterRemote control with 15 meter cable to control speed and sense of rotation.
remote control for pump10 metre extension cable with ON/OFF switch.
remote controlHandy little transmitter with receiver.
NIROSTAR 2000-C with frequency converter and remote controlremote control for pump
Trolley with removable push rod and handy cable reel.
Electronic and mechanical meters for various fl uids and applications.All electronic meters also available in pulser version.
9. Accessories
remote control
Flow meters
transport cart
remote control
Page 18
Extremely lightweight and effi cient pump for mobile applications with battery drive 12 or 24 Volt. For continuous duty approved.
► Flow rate max.: 15 L/min with 12 V — 30 L/min with 24 V► Operating pressure max.: 3 bar ► Weight: only 3.1 kg
Features:► dry self-priming impeller pump► 3 pole connector plug► ON/OFF switch with thermal motor protection► 2” barrel connection (on option)
(barrel and battery not included with the delivery)
Low noise watering and fertilizing of large areas with 12/24 Volt battery drive.
Features:UNISTAR 2000-A with ZUMATIC pump control switching the pump on and off automatically. ► Tank content: 120 litres
Pump UNISTAR with pump control and 12 or 24 Volt drive separately available.
(battery not included)
Effective aid to fl ooded basements. Also available with oil resistant hose for oil contaminated fl uids.For larger areas two or more mats can be connected to the pump in parallel.
application:► drain fl ooded basements► suck off fl at roofs► clean sludgy ponds
Features:UNISTAR 2000-B, spiral hose, fl at suction mat and euro container with cover.On option: pump control, dry run protection and pumps with higher capacity or superior materials (COMBISTAR and NIROSTAR also for fl uids with abrasive particles).
10. Special Applications
Barrel pump for battery drive
Flat suction kits
Watering cart
Additional information on these products is available in our detailed brochure for Flat suction kits (sent to you on request) or can be downloaded from www.zuwa.de
Page 19
10. Special Applications
HVaC Filling and Flushing stations
FLUSH PRO
Solarcheck Mobilcenter
DESCAL
Stationary ServiceCenter Mobile ServiceCenter
UNISTAR 2000
DESCALFLUSH PRO
Additional information regarding these products is available in our detailed brochure for HVAC professionals (sent to you on request) or can be downloaded from www.zuwa.de
ZUWA-Zumpe GmbHFranz-Fuchs-Str. 13-17D-83410 Laufen
Phone: +49 8682 8934-50Fax.: +49 8682 8934-850E-Mail: [email protected] ©
ZU
WA
01/2
013
impeller Pumps
www.ZUWa.de
QUALITY
SINCE 1946
