Flexus 22 RGB - Flexible LED Lighting

FLEXUS 22 RGB

Kemps Architectural Lighting Unit 10, Kirkstall Industrial Park, Kirkstall Road, Leeds LS4 2AZ, United KingdomT. +44(0)113 263 9039 E. sales@kempslighting.com W. www.kempsarchitecturallighting.com

Applications

•Architectural & Commercial Lighting•Landscape & Exterior Lighting•Outlining Buildings

Features

•Bend direction - Vertical•Min Bend Diameter 30cm•UV & Flame resistant •Uniform & even light source with

no hotspots• IP68 for exterior use•Environmentally friendly & energyefficient

•Easy to install

Technical

•High quality SMD LED chip•7mtr Maximum series length•24V Input (Remote Drivers)•DALI - DMX•Operating Temp 0-50C•CE&ULcertification•3yr Warranty

FLEXUS 22 RGB

Kemps Architectural Lighting Unit 10, Kirkstall Industrial Park, Kirkstall Road, Leeds LS4 2AZ, United KingdomT. +44(0)113 263 9039 E. sales@kempslighting.com W. www.kempsarchitecturallighting.com

Specification FLEXUS 22 RGB

Kemps Code Color Power(W) Volts Typical Lumens (mtr) Cutting Dimension Length(mm) Angle(Deg.)

KAL-C-FR-ProF22A-VB-24CV-RGB RGB 12W 24V R20 - G75 - B15 - W110 83mm 16mm*17mm 10000 160

Max continuous length of 7mtr when powering one end

FLEXUS 22 RGB

Kemps Architectural Lighting Unit 10, Kirkstall Industrial Park, Kirkstall Road, Leeds LS4 2AZ, United KingdomT. +44(0)113 263 9039 E. sales@kempslighting.com W. www.kempsarchitecturallighting.com

Accessories FLEXUS 22 RGB

Kemps Code Description

KAL-F22A-IM/FC-B-300MM 4 Wires Bottom Feed Injection Moulded Front Connector with 300mm (11.8") Lead Wire

KAL-F22A-IM/FC-B-1000MM 4 Wires Bottom Feed Injection Moulded Front Connector with 1000mm (3.28Ft.) Lead Wire

KAL-F22A-IM/FC-B-3000MM 4 Wires Bottom Feed Injection Moulded Front Connector with 3000mm (9.84Ft.) Lead Wire

KAL-F22A-IM/FC-B-5000MM 4 Wires Bottom Feed Injection Moulded Front Connector with 5000mm (16.4Ft.) Lead Wire

KAL-F22A-IM/FC-B-10000MM 4 Wires Bottom Feed Injection Moulded Front Connector with 10000mm (32.8Ft.) Lead Wire

KAL-F22A-IM/FC-01-S-300MM 4 Wires Side Feed Injection Moulded Front Connector from 01 end with 300mm (11.8") Lead Wire

KAL-F22A-IM/FC-02-S-300MM 4 Wires Side Feed Injection Moulded Front Connector from 02 end with 300mm (11.8") Lead Wire

KAL-F22A-IM/FC-01-S-1000MM 4 Wires Side Feed Injection Moulded Front Connector from 01 end with 1000mm (3.28Ft.) Lead Wire

KAL-F22A-IM/FC-02-S-1000MM 4 Wires Side Feed Injection Moulded Front Connector from 02 end with 1000mm (3.28Ft.) Lead Wire

KAL-F22A-IM/FC-01-S-3000MM 4 Wires Side Feed Injection Moulded Front Connector from 01 end with 3000mm (9.84Ft.) Lead Wire

KAL-F22A-IM/FC-02-S-3000MM 4 Wires Side Feed Injection Moulded Front Connector from 02 end with 3000mm (9.84Ft.) Lead Wire

KAL-F22A-IM/FC-01-S-5000MM 4 Wires Side Feed Injection Moulded Front Connector from 01 end with 5000mm (16.4Ft.) Lead Wire

KAL-F22A-IM/FC-02-S-5000MM 4 Wires Side Feed Injection Moulded Front Connector from 02 end with 5000mm (16.4Ft.) Lead Wire

KAL-F22A-IM/FC-01-S-10000MM 4 Wires Side Feed Injection Moulded Front Connector from 01 end with 10000mm (32.8Ft.) Lead Wire

KAL-F22A-IM/FC-02-S-10000MM 4 Wires Side Feed Injection Moulded Front Connector from 02 end with 10000mm (32.8Ft.) Lead Wire

KAL-F22A-IM/FC-E-300MM 4 Wires End Feed Injection Moulded Front Connector with 300mm (11.8") Lead Wire

KAL-F22A-IM/FC-E-1000MM 4 Wires End Feed Injection Moulded Front Connector with 1000mm (3.28Ft.) Lead Wire

KAL-F22A-IM/FC-E-3000MM 4 Wires End Feed Injection Moulded Front Connector with 3000mm (9.84Ft.) Lead Wire

KAL-F22A-IM/FC-E-5000MM 4 Wires End Feed Injection Moulded Front Connector with 5000mm (16.4Ft.) Lead Wire

KAL-F22A-IM/FC-E-10000MM 4 Wires End Feed Injection Moulded Front Connector with 10000mm (32.8Ft.) Lead Wire

KAL-F22-IM/EC Injection Moulded End Cap

KAL-F22A-IM/JU-01/02-300MM 4 Wires Injection Moulded Jumper with 300mm (11.8") Lead Wire

KAL-F22-A/PL-2000MM-AL StandardAnodizedAluminumProfile,2000mm(80'')with10screws

KAL-F22-A/PL-1000MM-AL StandardAnodizedAluminumProfile,1000mm(40'')with5screws

KAL-F22-A/PL-500MM-AL StandardAnodizedAluminumProfile,500mm(20'')with3screws

KAL-F22-A/PL-50MM-AL StandardAnodizedAluminumProfile,50mm(2'')with1screw

KAL-F22-SLA/PL-2000MM-AL Self-LockingAnodizedAluminumProfile,2000mm(80'')with6clipsand10screws

KAL-F22-SLA/PL-1000MM-AL Self-LockingAnodizedAluminumProfile,1000mm(40'')with3clipsand5screws

KAL-F22-SLA/PL-500MM-AL Self-LockingAnodizedAluminumProfile,500mm(20'')with2clipsand3screws

KAL-F22-SLA/PL-50MM-AL Self-LockingAnodizedAluminumProfile,50mm(2'')with1clipand1screw

KAL-F22-SLA/PL-2000MM-AL2 NewSelf-LockingAnodizedAluminumProfile,2000mm(80'')with9springclipsand10screws

KAL-F22-SLA/PL-1000MM-AL2 NewSelf-LockingAnodizedAluminumProfile,1000mm(40'')with5springclipsand5screws

KAL-F22-SLA/PL-500MM-AL2 NewSelf-LockingAnodizedAluminumProfile,500mm(20'')with3springclipsand3screws

KAL-F22-SLA/PL-35MM-AL2 NewSelf-LockingAnodizedAluminumProfile,35mm(1.38'')with1springclipand2screws

KAL-F22-P/PL-2000MM-WT WhiteCoatingPlasticProfile,2000mm(80'')with10screws

KAL-F22-P/PL-1000MM-WT WhiteCoatingPlasticProfile,1000mm(40'')with5screws

KAL-F22-P/PL-500MM-WT WhiteCoatingPlasticProfile,500mm(20'')with3screws

FLEXUS 22 RGB

Assembly Caution

Additional Information

Kemps Architectural Lighting Unit 10, Kirkstall Industrial Park, Kirkstall Road, Leeds LS4 2AZ, United KingdomT. +44(0)113 263 9039 E. sales@kempslighting.com W. www.kempsarchitecturallighting.com

Rev 1-07/17

Please contact our sales team on +44(0)113 263 9039 for further assistance. Specifications are subject to change withour prior notice. Please refer to our website for the most up to date version.

Flame Resistant

Solvents Resistant

UV Resistant

SaltwaterResistant

IK08Protection

BendingDiameter

9cm

Beam Angle160°

Flame Resistant

Solvents Resistant

UV Resistant

SaltwaterResistant

IK08Protection

BendingDiameter

9cm

Beam Angle160°

Flame Resistant

Solvents Resistant

UV Resistant

SaltwaterResistant

IK08Protection

BendingDiameter

9cm

Beam Angle160°

Flame Resistant

Solvents Resistant

UV Resistant

SaltwaterResistant

IK08Protection

BendingDiameter

9cm

Beam Angle160°

Flame Resistant

Solvents Resistant

UV Resistant

SaltwaterResistant

IK08Protection

BendingDiameter

9cm

Beam Angle160°

Flame Resistant

Solvents Resistant

UV Resistant

SaltwaterResistant

IK08Protection

BendingDiameter

9cm

Beam Angle160°

Section Detail 12www.edison-opto.comCopyright © 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1

Stellar Series Lighting Application Guide

Assembly Caution

EDFRF10B series minimum bent diameter and bending direction.

EDFRF15A/B series minimum bent diameter and bending direction.

EDFRF22A/B series minimum bent diameter and bending direction.

12 0mm

Ligh t SurfaceLigh t Surfac e

Ligh t Surface Ligh t Surfac e

Recommened Use

Ligh t Surface Ligh t Surface

××

120m m

Li gh t Su rfac eLigh t Surfac e

××

Ligh t Surface Ligh t Surfac e

Recommened Use

Ligh t Surface Ligh t Surface

××

Light Surface

Φ90mm

Light Surface

×

Light Surface Light Surface

Recommened Use

Light Surface Light Surface

××

www.edison-opto.com

Copyright © 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 1 4

Product Dimensions

EDFRF F10 Series 6LBU1xxJK0G07201 Dimensions

EDFRF F15 Series 6LBU1xxJK0M06001 Dimensions

EDFRF F22 Series 6LBU1M1JJ0L07201 and 6LBU1xxJK0G10801 Dimensions

18±0

.2

9±0.2

Emitting area

11.5±0.2

21±0

.2 Emitting area

16±0

.2

16±0.2

Emitting area

Note:All dimensions are in millimeters.

BendingDiameter

30cm

BendingDiameter

12cm

30cm

Light SurfaceLight Surface

Light Surface

Light SurfaceLight Surface

Light Surface