Date post: | 05-Sep-2018 |
Category: |
Documents |
Upload: | truongkhanh |
View: | 213 times |
Download: | 0 times |
All informations are subject to change without notice. © 2018 Spring Lighting Group All rights reserved.
SLG Lighting10643 W. Airport Blvd. Suite 400, Stafford , Texas 77477
Email: [email protected] | Phone: (832) 939-8412 | www.slgus.com FLS.V18.06
Project:
Catalog No.:
Fixture Type:
Notes:
FLS MINI FLOOD LIGHT SERIES
SPECIFICATIONSHOUSING Precision die-cast aluminum housings and mounting knuckle. Parting lines dressed for high quality finish.AMBIENT TEMPERATURE Suitable for use in -40°C to +45°C (-40°F to 113°F)MOUNTING Mounting Knuckle with ½” threaded male fitting and “O-ring” gasket or TrunnionEFFICACY Up to 120 lumen’s per watt (see individual wattage data)CCT AND CRI 3000K, 4000K and 5000K CCT available; 70CRIOPTICS NEMA Wide (7H X 7V)LENS Frosted AcrylicGASKETS High temperature molded one-piece siliconeFASTENERS Stainless steel, tamper proofWARRANTY 10 year limited warranty. Complete warranty terms located at. www.slgus.com
PERFORMANCE INFORMATION*
Mini-Floodlights are capable of replacing 150W Incandescent PAR lamps, all the way up to 100W Metal Halide Floodlights, and provide substantial energy-savings.
Applications: landscape, a small sign, building accent lighting, etc.
Replacement: 50W MH - 100W MH / 100W-150W Halogen
ORDERING GUIDE EXAMPLE: FLS 15 G1 4kLuminaire Type Lumen Output* Generation Voltage CCT Finish Mounting
FLS Mini Flood Light
15 1,500 Lumens 30 3,000 Lumens51 5,400 Lumens
G1 Blank 120-277V
3K 3000K4K 4000K5K 5000K
Blank Dark Bronze
Blank 1/2 Knuckle
T Trunnion
ELECTRICAL Driver efficiency (>90% standard), 50/60Hz available in 120-277V Open/short circuit protection. 10K Surge protector per ANSI/IEEE C62.41.2FINISH Polyester Powder finish in BronzeCERTIFICATIONSUL Listed for wet locations. Equivalent to IP65 rating. FCC compliant. RoHs compliant. Design Lights Consortium® (DLC) Standard qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.slgus.com/DLC to confirm which versions are qualified.
NOTE: Standard driver operates on any line voltage from 120-277V (50/60 Hz). * Data as report to DLC, actual test results may vary
SERIES NUMBER
POWER VOLTAGEDELIVERED
LUMENSBEAM
PATTERNCCT
FLS 15 G1 5K 15 Watts 120-277V 1,500 Lumens 7Hx7V(150°x150°) 5000K
FLS 30 G1 5K 30 Watts 120-277V 3,000 Lumens 7Hx7V(150°x150°) 5000K
FLS 51 G1 5K 45 Watts 120-277V 5,400 Lumens 7Hx7V(150°x150°) 5000K
Finish Color
Dark Bronze
All informations are subject to change without notice. © 2018 Spring Lighting Group All rights reserved.
SLG Lighting10643 W. Airport Blvd. Suite 400, Stafford , Texas 77477
Email: [email protected] | Phone: (832) 939-8412 | www.slgus.com FLS.V18.06
DIMENSIONS
Scan for more information
PHOTOMETRICFLS 15 FLS 30 FLS 51
Current (A)Series Number Wattage 120V 208V 240V 277V
FLS 15 G1 5K 15 Watts 0.13 0.07 0.06 0.5
FLS 30 G1 5K 30 Watts 0.25 0.14 0.13 0.11
FLS 51 G1 5K 45 Watts 0.37 0.22 0.19 0.16
ELECTRICAL LOAD
4.72 in.1.45 in.1.17 in.
2.95
in.
3.98
in.
1.62
in.
15W: WEIGHT: 0.95 LBS
4.5(1.75in.)7.08 in.
5.59 in.
2.93
in.
4.42
in.
5.46
in.
1.62
in.
30W: WEIGHT: 1.9 LBS
8.26 in.2.45 in.2.0 in.
5.16
in.
6.19
in.
1.62
in.
45W: WEIGHT: 3.75 LBS
MOUNTING1/2” KNUCKLEDie-cast aluminum knuckle provides flexibility in mounting from a variety of areas.
TRUNNIONDie-cast aluminum knuckle provides flexibility in mounting from a variety of areas.
PERFORMANCE COMPARISONProduct Series
LED Watts
Lumen Output
Lumens Per/Watt
REPLACES Voltage DLC
FLS 15 15W 1,500 Lm 100 Lm/W 100WHalogen / 50W HID
120-277V
FLS 30 30W 3,000 Lm 100 Lm/W 100WHalogen/ 50W HID
120-277V
FLS 51 45W 5,400 Lm 120 Lm/W 150WHalogen/ 100W HID
120-277V