Date post: | 08-Apr-2016 |
Category: |
Documents |
Upload: | mohanrajwithu |
View: | 144 times |
Download: | 0 times |
PL.I!.JKE®
Fluke 115 True-RMS Digital Multimeter
RC ITEM :5 ;~ 5,667.76 + Taxes
, _~ _ _ .~~ ,-~~~~,,~f
The Fluke 115 is the solution for a wide variety of electrical and electronic testingapplications. This true-rms meter provides easy one-handed operation in a compactpackage.
Features• Resistance, continuity, frequency,
capacitance, and diode test• Measures 10 A (20 A overload for 30
seconds)• Large white LED backlight to work in poorly
lit areas• True-rms for accurate measurements on
non-linear loads
Fluke 287 Logging Multlmeter
The Fluke 287 packs more accuracy and convenience into a hand held multimeterthan ever before, putting more problem solving power in your hands. It is theultimate hand held tool for demanding applications that require high-precision.
_ www.fluke.com/india
Features• 4.5 Digit Resolution, 50,000 counts• Logging function with TrendCapture• True-rms ac voltage and current for accurate
measurements on complex signals or non-linear loads• Measure up to 1OAand 100 mF capacitance range• Temperature function
RC ITEM: 7~ 23,075.00 +Taxes
DGS&D RATE CONTRACT 2013
FLILJKE®
Fluke 8845A High Precision Digital Multimeter
With the precision and versatility for bench or systems applications, Fluke 8845A DMMsperform the functions you would expect to see in a multifunction DMM, includingmeasuring volts, ohms, and amps.
Features• 6.5 Digit Resolution• Basic V dc accuracy of up to 0.0035%• Dual Display• 1OOIJAto 1OA current range with up to 100pA
resolution• TrendplotTM paperless recorder mode,
statistics, histogram
RE IliEM: 8'~ 59,991.72 :rh Taxes,- """, ~ -
.@e~®~~~c~us
-,.-.---.-.-.-.--.--.- ..-.---.~-.~-.-.. -~~-.---;-----.-.-~.--~--.---.- ..-....----.----.
www.fluke.com/india ' DGS&D RATE CONTRACT 2013
Fluke 1550C 5kV Insulation Resistance Tester
RC ITEM :3 i
t 1,42,877.00 + Taxes~~ -~~---
FLU~E®
Features• Insulation Resistance measurements up to 1.0TO• Test voltages up to 5 kV provides solutions for all
applications• Voltage breakdown detection alerts the user that
voltage is present and gives the voltage readingup to 600 V ac or dc for increased user safety
• Selectable test voltages in 50 V steps from 250 to1000 V, and 100 V steps above 1000 V
• Automatic calculation of Dielectric Absorption(DAR) and Polarization Index (PI) with noadditional setup
• Guard system eliminates the effect of surfaceleakage current on high-resistancemeasurements
Digital insulation testing up to 5 kV make them ideal for testing a wide range of highvoltage equipment including switchgear, motors, generators and cables. Withmeasurement storage and PC interface Fluke1550C are perfect tools forpreventative or predictive maintenance programs designed to identify potentialequipment failures before they occur.
www.fluke.com/india DGS&D RATE CONTRACT 2013
Fluke1507 1kV Insulation Resistance Tester
Compact, rugged, reliable, and easy to use with their multiple test voltages, Fluke1507 is ideal for many troubleshooting, commissioning, and preventativemaintenance applications. Additional features, like the remote probe on thesetools save both time and money when performing tests.
FeaturesInsulation Resistance: 0.01 0 to 10.00 kOInsulation test voltages:- 1507: 50 V, 100 V, 250 V, 500 V, 1000 VMake repetitive tests simple and easy with the 1507'sCompare (Pass/Fail) functionLive circuit detection prevents insulation test if voltage>30 V is detected for added user protectionAutomatic calculation of Polarization Index andDielectric Absorption RatioMeasures AC/DC voltage: 0.1 V to 600 V
RCITEM:2 !
t 21,800.00 + T~xe~
Fluke 376 True RMS Clamp Meter Hand Held
FL.UKc®
,-------J RC ITEM: 1 ~L"{ _~O,47~J_8!J~x~es_-~--. -~-.,. --'
Be ready for anything with the improved performance perfect for a wide range of currentmeasurement situations. With true-rms voltage and current measurements, the Fluke 376can read upto 1000 V and 1000Ain both ac and dc modes.
Features• Current range upto 2500 A ac using new iFlex™
flexible current probe• True-rms ac voltage and current for accurate
measurements on non-linear signals• Min, max, average and inrush recording to
capture variations automatically• Integrated low pass filter and state of the art
signal processing allows for use in noisy electricalenvironments while providing stable readings
• Proprietary inrush measurement technology tofilter out noise and capture motor starting currentexactly as the circuit protection sees it
•• www.fluke.com/indi-·a---------~ DGS&D RATE CONTRACT 20l~
rFLUKE®
Fluke 434-11 Power Quality Analyser••....-----
RC ITEM: 12 I~ 4,00,000.00 + Taxes....,...,. --.~~
The Fluke 434 " Energy Analyzer is the ideal tool for energy logging. Utilizing thenew Energy Loss Calculator function, the 434 II measures the fiscal cost of energywasted due to poor power quality. This energy monetization capability allows youto identify the most energy-wasteful areas of your facility so you can determinepotential energy saving solutions. Add basic power quality measurements to thepackage and you're got yourself one powerful troubleshooting tool.
Features• Measures voltage, current, power and Energy• Harmonic and Inter Harmonic measurement
upto 50th order• Patented Energy Loss calculation• Inverter Efficiency measurement• Inrush Current and Unbalance• Suitable for HT secondary side measurement• 5 voltage and 4 current channels - P-P, P-N, N-G
voltages measured• Highest sampling rate - 5000 samples for 10 cycles
CE
----------_ ...._._.__ ._------_._--_._ .._-------------------www.fluke.com/india
--_ ..._--_._------------_._--------------------------------------DGS&D RATE CONTRACT 2013
FLUKc®
Fluke 190-102/8 & Fluke 190-202/8 Portable Oscilloscope
RC ITEM :9 ,~ 1,90,000 + Taxes
"',.,. ~ -~~
RC ITEM: 10~ 2,08,800 + Taxes
~- --~~
The Fluke 190 2 Channel ScopeMeter oscilloscopes from Fluke, with electricallyisolated channels, are safety rated for industrial applications. These scopescombine rugged portability with the high performance of bench oscilloscopes to takeyou from troubleshooting microelectronics all the way into power electronicapplications.
Features
• CAT IV 600V and CAT III 1000V safety rating
• Completely isolated channel and floating pointmeasurement
IP 51 protection to suit Hard field use
• Connect & View trigger option for ease of use
• Three - in - One product - Portable oscilloscope,DMM and recorder in one instrument
• Upto 4 Hrs backup with standard battery and upto7 Hours with optional battery
• 100 screen automatic storage and replay - Youdon't miss any event
• Pass/fail test with waveform envelope
• Two USB port one to connect to PC/Laptop andother to connect USB stick for easy data transfer
~~s<1 (E CN10140
Specification 190/102/5 190/202/5Bandwidth 100MHz 200MHzSampling rate 1/25GS/5 2.5GS/5Record length 10K per channel 10K per channelGlitch capture 8nS 8nSMeter Resolution 5000 count 5000 count
-----~-~---www.fluke.com/india DGS&D RATE CONTRACT 2013