Flygt Water & Wastewater Pumps Application and Sales Guide A-C Series

2

Served Markets – Flygt A-C Series

3

General Water Applications

    LL/NL3000

series PL7000 series A-C Vert. Turbine* A-C Vert. Column

A-C Split case

Duty Flow range up to 35,000 GPM 120,000 GPM 60,000 GPM 370,000 GPM 220,000 GPM

Head range up to 125 feet 50 feet 3500 feet 230 feet 600 feet

Liquid

Storm Water/ Flood Control - -

Wash/Waste/Raw Water

Corrosive Liquid/ Special Materials

Potable Water - -

Cooling Service / River Water

Industrial Water / Sea Water

Operation

Station Footprint Flow < 200,000

Station Footprint Flow > 200,000

Areas with flooding risk

Motor Motor type submersible submersible standard standard standard

= excellent = good = average - = not applicable

Exceptions apply. Each case must be considered individually.

Flygt Submersible Axial and Mixed Flow Pumps

•  High volume, low head •  Reduced station footprint •  Simple installation •  No alignment required •  Ideal for areas with flooding risk •  N –Technology •  Sustained Efficiency •  Over 1,500 pumps installed in the U.S.

Flygt Multi-stage Column Pumps (a.k.a. A-C Series Vertical Turbine Pumps)

•  Multi-stage design = very high head •  Energy efficient •  Special materials for sea water and industrial water •  Drinking water service •  Easy to service dry pit motors

Flygt Customized Column Pumps A-C Series

•  High volume •  Energy efficient •  Special materials for industrial

and sea water applications •  Heavy duty design •  Back pullout rotating element •  Reduced station footprint •  Full scale testing capability •  Custom Pump = Design flexibility

Flygt Customized Split Case Pumps A-C Series

•  Energy efficient •  Special materials for sea water and

industrial water •  Drinking water service •  Split casing •  Easy and low cost maintenance. •  Full scale testing capability •  Custom Pump = Design flexibility

Water and Wastewater

    N3000 series Submersible

C/N3001 series Large

A-C Series NSW/NSX/NSY

A-C Series SS/WSY

Duty Flow range up to 8,000 GPM 16,000 GPM 24,000 GPM 180,000 GPM

Head range up to 300 feet 400 feet 300 feet 230 feet

Liquid

Wastewater/Storm water

Fibrous/stringy Wastewater

Thick sludge (~4-8%) -

Abrasive fluid (grit, slurry) - -

Corrosive Liquid/ Special Materials

Sea water

High temperature

Operation Areas with flooding risk - -

Installation

Submersible/Dry

Submersible/Dry Dry Dry

Motor Motor type submersible submersible standard standard

= excellent = good = average - = not applicable

Chart non-inclusive. Each case must be considered individually.

Flygt N-Series Submersible Pumps

•  Submersible and dry pit installations •  Superior non-clog characteristics •  Reduced unscheduled call-outs •  Sustained hydraulic efficiency •  No alignment required •  Simple installation •  Ideal for areas with flooding risk •  Well proven technology with over

300,000 installations world wide •  Case studies and test reports

available

Small and Medium Capacity Dry Pit Pumps A-C Series Non-Clog

•  Energy efficient •  Special materials for industrial wastewater

and sea water •  Abrasive, corrosive fluids handling •  PEG base for VFD applications •  Warm liquid applications •  Easy access and maintenance •  Over 130 years of industry experience

•  High volume •  Energy efficient •  Heavy duty design •  Special materials for sea water and industrial wastewater •  Full scale testing capability •  Over 130 years of industry experience •  Custom Pump = Design flexibility

Customized Large Capacity Dry Pit Pumps A-C Series

For More Information go to: www.flygtus.com/A-Cseriespumps

12