Date post: | 23-Nov-2014 |
Category: |
Documents |
Upload: | ezequiel-fausto |
View: | 224 times |
Download: | 3 times |
Mexico: Telf.:52 55 5397 3772
•Turning Toolholders & Boring Bars PG. 1 •Turning Inserts PG. 2
•Jet-Stream™ Thru Coolant Cutting Tools PG. 3 •Cut-off Toolholder & Inserts PG. 4
•Threading Inserts, Toolholders & Bars PG. 5 •Milling Inserts PG. 6 •Milling Cutting Tools PG. 7-8
•Turning, Boring & Milling Sets PG. 9 •Knurling Tools PG. 9-10 •High Performance Tool Presetters & Tightening Fixture PG. 10 •High Performance Live Centers PG. 20
•SUPER Quick Change Tool Post, Toolholders & Sets PG. 13-14 •Victory™ Automatic Thru Coolant Tool Post, Toolholders & Sets PG. 15-16 •Quadra Indexing Quick Change Tool Post, Toolholders & Sets PG. 17-18 •CNC Adjustable Angle Heads PG. 19
•CNC Marker PG. 20
•Victory™ CNC Quick Change Gang Tool PG. 21-22
•Manual & Automated Turrets PG. 23
•4th Axis CNC Rotary Tables PG. 24
•Dorian Oil Skimmer PG. 25
•Vises, Collets & Holders PG. 26
Call: 01800 699 99 99E-mail: [email protected]
Visit: www.herramental.com.mx
High Performance Cutting Tools, Inserts & Machine Tool Accessories
Product Catalog Supplement
For catalogs featuring the full line of any product from this brochure e-mail: [email protected]
Copyright ® 2009 by Dorian Tool, East Bernard, Texas. All rights reserved.Made In U.S.A.
Negative “M” Style C-Toolholder
Inch Description
UPC No. 733101- Shank SizeR.H. L.H.
MCLNR/L12-4B 50120 50121 0.750
MCLNR/L16-4D 50128 50129 1.000
MCLNR/L20-4D 50132 50133 1.250
Negative “M” Style T-Toolholder
Inch Description
UPC No. 733101- Shank SizeR.H. L.H.
MTJNR/L12-3B 50894 50895 0.750
MTJNR/L16-3D 50898 50899 1.000
MTJNR/L20-4D 50906 50907 1.250
Negative “M” Style D-Toolholder
Inch Description
UPC No. 733101- Shank SizeR.H. L.H.
MDJNR/L12-4B 50324 50325 0.750
MDJNR/L16-4D 50332 50333 1.000
MDJNR/L20-4D 50336 50337 1.250
Negative “M” Style V-Toolholder
Inch Description
UPC No. 733101- Shank SizeR.H. L.H.
MVJNR/L12-3B 51062 51063 0.750
MVJNR/L16-3D 51070 51071 1.000
MVJNR/L20-3D 51074 51075 1.250
Positive “S” Style
Utility- Toolholder
Inch Description
UPC No. 733101- Shank SizeR.H.
STACR06-2 51556 0.375
STACR08-2J 51558 0.375
STACR10-2A 51560 0.625
STACR12-3B 51562 0.750
STACR64-3D 51564 0.750
STCCR06-2 51578 0.375
STCCR08-2J 51580 0.500
STCCR10-2A 51582 0.625
STCCR12-3B 51584 0.750
STCCR64-3D 51586 0.750
STDCR06-2 51600 0.375
STDCR08-2J 51602 0.500
STDCR10-2A 51604 0.625
STDCR12-3B 51606 0.750
STDCR64-3D 51608 0.750
STECN06-2 51622 0.375
STECN08-2J 51624 0.500
STECN10-2A 51626 0.625
STECN12-3B 51628 0.750
STECN64-3D 51630 0.750
STNCR06-2 51734 0.375
STNCR08-2J 51736 0.500
STNCR10-2A 51738 0.625
STNCR12-3B 51740 0.750
Inch Description Positive
“S” Style ST5CR-Utility
Toolholder SETS
UPC No. 733101-
Shank Size
Tool Length
17 Pc. Set:(5)
Toolholders(10)
Inserts(1)
Tork key(1)
Storage Box
ST5CR-S06-2-S 85092 0.275 2.500
ST5CR-S08-2-S 85096 0.500 3.500
ST5CR-S10-2-S 85100 0.625 4.00
ST5CR-S12-3-S 85104 0.750 4.500
ST5CR-S64-3-S 85108 1.000 6.00
5 Tools & 10 Inserts
Negative “M’’ Style C-Boring Bars
Inch Description
UPC No. 733101- Bar SizeR.H. L.H.
S12S-MCLNR/L-4 55006 55007 0.750
S16T-MCLNR/L-4 55010 55011 1.000
S20U-MCLNR/L-4 55014 55015 1.250
Negative “M’’ Style D-Boring Bars
Inch Description
UPC No. 733101- Bar SizeR.H. L.H.
S16T-MDUNR/L-3 55066 55067 1.000
S16T-MDUNR/L-4 55070 55071 1.250
S24U-MDUNR/L-4 55074 55075 1.500
Negative “M’’ Style D-Boring Bars
Inch Description
UPC No. 733101- Bar SizeR.H. L.H.
S12S-MTUNR/L-3 55204 55205 0.750
S16T-MTUNR/L-3 55208 55209 1.000
S20U-MTUNR/L-3 55212 55213 1.250
Positive Utility
Boring Bars
Inch Description
UPC No. 733101- Bar SizeR.H.
STCMB06-2 55738 0.500
STCMB08-2 55740 0.500
STCMB10-2 55742 0.625
STCMB12-3 55744 0.750
STCMB16-3 55746 1.000
STCMB20-4 55748 1.250
STCMB24-4 55750 1.500
TPBN06-2 55658 0.500
TPBN08-2 55660 0.500
TPBN10-2 55662 0.625
TPBN12-3 55664 0.750
TPBN16-3 55666 1.000
TPBN20-3 55668 1.250
TPBN20-4 55670 1.250
TPBN24-4 55672 1.500
Positive Miniature
Boring Bars
Inch Description
UPC No. 733101- Bar SizeR.H. L.H.
S06H-SCLCR-2 55450 55451 0.375
S08K-SCLCR-2 55454 55455 0.500
S10M-SCLCR-2 55458 55459 0.625
S06H-SDUCR-2 55540 55541 0.375
S08K-SDUCR-2 55544 55545 0.500
S10M-SDUCR-2 55548 55549 0.625
S08H-STUCR-1.2-2 55724 - 0.500
S08H-STUCR-1.2-3 55726 - 0.500
S08H-STUCR-1.2-4 55728 - 0.500
S08H-SWUCR-1.2-2 55900 - 0.500
S08H-SWUCR-1.2-3 55902 - 0.500
S08H-SWUCR-1.2-4 55904 - 0.500
S06H-SWUCR-2 55906 - 0.375
S08K-SWUCR-2 55907 - 0.500
S10M-SWUCR-2 55908 - 0.625
Negative “M’’ Style V-Boring Bars
Inch Description
UPC No. 733101- Bar SizeR.H. L.H.
S16T-MVUNR/L-3 55266 55267 1.000
S20U-MVUNR/L-3 55270 55271 1.250
S24U-MVUNR/L-3 55274 55275 1.500
Negative “M’’ Style W-Boring Bars
Inch Description
UPC No. 733101- Bar SizeR.H. L.H.
S12S-MWLNR/L-3 55318 55319 0.750
S16T-MWLNR/L-4 55322 55323 1.000
S20U-MWLNR/L-4 55326 55327 1.250
Turning Toolholders Boring Bars
Negative “M” Style W-Toolholder
Inch Description
UPC No. 733101- Shank SizeR.H. L.H.
MWLNR/L12-4B 51266 51267 0.750
MWLNR/L12-4D 51268 51269 0.750
MWLNR/L16-4D 51270 51271 1.000
MWLNR/L20-4D 51274 51275 1.250
Turning Toolholders & Boring Bars
1 Visit: www.doriantool.com Call Dorian Tool Oficina Mexico: 52 55 5397 3772 Fax Dorian Tool Oficina Mexico: 52 55 53 62 22 62
Finger ClampDescription
UPC No. 733101-
PKG.
CL-6 90681
10
CL-7 90682
CL-9 90683
CL-12 90684
CL-20 90686
CL-30 90688Negative Lock Pin
NL-33L 90474
10NL-34L 90476
NL-44 90478
NL-46 90479
Finger Clamp Screw XNS-36 90902
10
XNS-37 90903
XNS-48 90907
XNS-510 90908
XNS-59 90911
PF
Finishing-
For Carbon &
Alloy Steel
ANSIDescription
InsertGrade
UPC No. 733101-
CNMG-431-PF
DHCP15
70237
DNMG-431-PF 70261
TNMG-331-PF 70297
TNMG-431-PF 70307
WNMG-331-PF 70324
WNMG-431-PF 70338
PM
General Purpose-
For Carbon &
Alloy Steel
ANSIDescription
InsertGrade
UPC No. 733101-
CNMG-432-PM
DHCP25
70368
DNMG-432-PM 70389
TNMG-332-PM 70421
TNMG-432-PM 70433
VNMG-332-PM 70441
WNMG-432-PM 70461
PR
Roughing-
For Carbon &
Alloy Steel
ANSIDescription
InsertGrade
UPC No. 733101-
CNMG-433-PR
DHCP35
70479
DNMG-433-PR 70513
TNMG-332-PR 70557
TNMG-433-PR 70570
WNMG-432-PR 70587
EPX
Finishing-Medium-
For Austenitic Stainless
Steel
ANSIDescription
InsertGrade
UPC No. 733101-
CNMG-431-EPX
DHCM20
69751
CNMG-432-EPX 69758
DNMG-431-EPX 69775
DNMG-432-EPX 69776
TNMG-331-EPX 69800
TNMG-332-EPX 69805
TNMG-332-EPX 69806
WNMG-431-EPX 69819
WNMG-432-EPX 69824
WNMG-432-EPX 69825
EG
Light Roughing-
General Purpose
ANSIDescription
InsertGrade
UPC No. 733101-
CNMG-432-EG
DVK25
70006
DNMG-432-EG 70034
TNMG-332-EG 70106
TNMG-432-EG 70114
VNMG-332-EG 70142
VNMG-433-EG 70150
UF
Finishing-
For Carbon &
Alloy Steel
ANSIDescription
InsertGrade
UPC No. 733101-
TCMT-21.51-UF
DHCP25
80313
TCMT-32.51-UF 80322
UM
General Purpose
For Carbon &
Alloy Steel
ANSIDescription
InsertGrade
UPC No. 733101-
TCMT-21.51-UM
DHCP25
79946
TCMT-21.52-UM 79948
TCMT-32.51-UM 79952
TCMT-32.52-UM 79958
UR
Roughing
For Carbon &
Alloy Steel
ANSIDescription
InsertGrade
UPC No. 733101-
TCMT-21.51-UR
DHCP25
80451
TCMT-21.52-UR 80454
TCMT-32.51-UR 80455
TCMT-32.52-UR 80458
SSF
Finishing-
For Stainless
Steel
ANSIDescription
InsertGrade
UPC No. 733101-
TCMT-21.51-SSF
DHCM35
80527
TCMT-32.51-SSF 80530
TCMT-32.52-UR 80533
Spare PartsBoring Insert Torx
Screw DescriptionUPC No. 733101-
PKG.
TS-06 91306
10
TS-06M 91307
TS-25.45-6M1 90970
TS-4.7-10M1 90982
TS-44-3-M 90937
TS-83-4M1 90950Turning Insert Torx
Screw TS-35.6-9M1 90973
10
TS-4.7-10M1 90982
Torx KeyT-7 92002
10T-15 92006
T-20 92007
Negative 80° Diamond Shim Seats Description
UPC No. 733101-
PKG.
ICSN-432 90006
10IDSN-433 90021
IVSN-322 90065
Negative 80° Trigon Shim Seats
IWSN-433 9007210
Negative Triangle Shim Seats
ITSN-322 90084
10ITSN-333 90088
ITSN-433 90093
Negative Turning Inserts Positive Turning Inserts
EZ
Finishing-
General Purpose
ANSIDescription
InsertGrade
UPC No. 733101-
TPGH-21.51-EZ
TPGH-21.51-EZ
DVK10
DVP656
71703
71703
TPGH-321-EZ
TPGH-321-EZ
DVK10
DVP656
71714
71715
TPGH-432-EZ
TPGH-432-EZ
DVK10
DVP656
71737
71736
Inserts & Spare Parts For Turning Toolholders & Boring Bars
2 Visit: www.doriantool.com Call Dorian Tool Oficina Mexico: 52 55 5397 3772 Fax Dorian Tool Oficina Mexico: 52 55 53 62 22 62
As a result the
insert will operate at a con-
stant low temperature, with a
clean and undamaged cutting
edge, changing the way metal is
cut. Higher surface speeds and
deeper cuts can be achieved,
with a better surface finish,
close working tolerance and
higher machine performance.
The insert life is extended up
to %002
From the apex of the Patented
locking clamp, the coolant
Jet-stream is aimed at a close
range of (6mm), precisely onto
the cutting edge of the insert at
a very high velocity.
The controlled jet-stream
coolant will lubricate the
cutting edge of the insert reduc-
ing the coefficient of
friction, stopping the chips from
adhering to the insert. The
physical combination of high
velocity and high
pressure, forces the hot chips
to hydroplane away from the
cutting edge of the insert.
1400 P.S.I.
1400 P.S.I.
Jet-Stream™ Thru Coolant Cutting Tools
ADCLNDescription
Part No. 733101- Shank Size
CNM_Gage InsertR.H. L.H.
ADCLNR/L-12-4B
ADCLNR/L-16-4D
ADCLNR/L-20-4D
53000
53002
53004
53001
53003
53005
0.75
1.00
1.25
432
432
432
ADDJNDescription
Part No. 733101- Shank Size
DNM_Gage InsertR.H. L.H.
ADDJNR/L-12-4B 53018 53019 0.75 432
ADDJNR/L-16-4D 53020 53021 1.00 432
ADDJNR/L-20-4D 53022 53023 1.25 432
ADVJNDescription
Part No. 733101- Shank Size
VNM_Gage InsertR.H. L.H.
ADVJNR/L-12-3B 53081 53082 0.75 332
ADVJNR/L-16-3D 53083 53084 1.00 332
ADVJNR/L-20-3D 53085 53086 1.25 332
ADWLNDescription
Part No. 733101- Shank Size
WNM_Gage InsertR.H. L.H.
ADWLNR/L-12-4B
ADWLNR/L-16-4D
ADWLNR/L-20-4D
53095
53099
53101
53096
53100
53102
0.75
1.00
1.25
432
432
432
AS-ADCLN Description
Part No. 733101- Bar Dia.
CNM_Gage InsertR.H. L.H.
AS-12R-ADCLNR/L-3
AS-16R-ADCLNR/L-4
AS-20S-ADCLNR/L-4
AS-24S-ADCLNR/L-4
AS-32T-ADCLNR/L-4
53120
53122
53124
53126
53128
53121
53123
53125
53127
53129
0.75
1.00
1.25
1.50
2.00
322
432
432
432
432
AS-ADWLN Description
Part No. 733101- Bar Dia.
WNM_Gage InsertR.H. L.H.
AS-12R-ADWLNR/L-3
AS-16R-ADWLNR/L-4
AS-20S-ADWLNR/L-4
AS-24S-ADWLNR/L-4
AS-32T-ADWLNR/L-4
53198
53200
53202
53204
53206
53199
53201
53203
53205
53207
0.75
1.00
1.25
1.50
2.00
332
432
432
432
432
(2) 1/8 NPT
Right Hand Shown Left Hand Opposite
Right Hand Shown Left Hand Opposite
(2) 1/8 NPT
(2) 1/8 NPT
Right Hand Shown Left Hand Opposite
(2) 1/8 NPT
Right Hand Shown Left Hand Opposite
1/8 NPT
Right Hand Shown Left Hand Opposite
AS-ADDUN Description
Part No. 733101- Bar Dia.
DNM_Gage InsertR.H. L.H.
AS-16R-ADDUNR/L-3
AS-20S-ADDUNR/L-4
AS-24S-ADDUNR/L-4
AS-32T-ADDUNR/L-4
53137
53139
53141
53143
53138
53140
53142
53144
1.00
1.25
1.50
2.00
332
432
432
432
1/8 NPT
Right Hand Shown Left Hand Opposite
1/8 NPT
Right Hand Shown Left Hand Opposite
AS-ADVUN
Description
Part No. 733101- Bar
Dia.
VNM_Gage InsertR.H. L.H.
AS-20S-ADVUNR/L-3 53189 53190 1.25 332
AS-24S-ADVUNR/L-3 53191 53192 1.50 3321/8 NPTRight Hand Shown Left Hand Opposite
1/8 NPTRight Hand Shown Left Hand Opposite
1/8 NPTRight Hand Shown Left Hand Opposite
1/8 NPTRight Hand Shown Left Hand Opposite
Interchangeable
Coolant Nozzles Control:
• Coolant Volume
• Coolant Pressure
• Insert Temperature
Thru Coolant
Dor-Lock™ Clamp
• Locks and cools in one action
• Operates at a Maximum of
(1400 P.S.I.) 20 Bar
• Aimes the coolant at a
short range of (6mm)
• Controls coolant pressure
and volume
Coolant O-Ring Seal
Coolant O-Ring Seal
LockingScrew
Jet-Stream Coolant Path
Insert Locking Force
Clamp Orifice 3 mm (.120")
Insert ClampWedge Lock
1/8 NPT
Right Hand Shown Left Hand Opposite
3 Visit: www.doriantool.com Call Dorian Tool Oficina Mexico: 52 55 5397 3772 Fax Dorian Tool Oficina Mexico: 52 55 53 62 22 62
Cut-off Toolholder & Inserts
Slot Grip Positive Stop Blades
Desc. Part No.733101- Insert UsedW
in mmD Max
in mmA
in mmL
in mmH
in mmH 1
in mm SGIH19-2 62950 SGT(N/R/L)-2 .087 2 1.57 39,9 .063 1,57 3.38 85,9 .618 15,7 0.75 19,1SGIH26-2 62951 SGT(N/R/L)-2 .087 2 2.00 50,8 .063 1,57
4.33 110,0 .842 21,4 1.02 25,9SGIH26-3 62952 SGT(N/R/L)-3 .122 3 3.00 76,2 .094 2,39SGIH26-4 62953 SGT(N/R/L)-4 .161 4 3.15 80,0 .125 3,18SGIH32-2 62962 SGT(N/R/L)-2 .087 2 3.94 100,0 .063 1,57
5.90 149.9 .984 25,0 1.25 31,8 SGIH32-3 62956 SGT(N/RL)-3 .122 3 3.94 100,0 .094 2.39SGIH32-4 62957 SGT(N/R/L)-4 .161 4 3.94 100,0 .125 3,18
Cut-Off Toolholder
DescriptionPart No.733101-
Max Dia W Insert UsedR.H. L.H.SGTHR/L-9,5-2 63000 63001 1.109 .087 & 0.93
SGTN/R/L-2-2,4SGTHR/L-12,7-2 63002 63003 1.172 .087 & 0.93SGTHR/L-16-2 63004 63005 1.172 .087 & 0.93SGTHR/L-19-2 63006 63007 1.266 .087 & 0.93SGTHR/L-12,7-3 63010 63011 1.266 .120
SGTN/R/L-3SGTHR/L-16-3 63012 63013 1.406 .120SGTHR/L-19-3 63014 63015 2.062 .120SGTHR/L-25,4-3 63016 63017 1.328 .120SGTHR/L-16-4 63018 63019 1.531 .160
SGTN/R/L-4SGTHR/L-19-4 63020 63021 2.500 .160SGTHR/L-25,4-4 63022 63023 1.531 .160SGTHR/L-19-5 63024 63025 1.531 .187 & .200
SGTN/R/L-4-8,5SGTHR/L-25,4-5 63026 63027 3.000 .187 & .200
DC656 - Titanium Nitride coated grade insert for machining alloy steel, stain-less steel, and ductile iron. This grade has both high wear resistance and heat resistance, increasing machining speeds up to 50%.
Cutting Data
Feed Per Revolution (in./rev.) .006-.031Surface Feet/Minute (ft./min.) 375-730
Designed for use with standard cut-off inserts and standard cut-off blade holders. The insert’s cutting edge location repeats accurately and as a result prevents insert splitting under heavy feed and shock loads. The blade and insert geometry permits free chip flow, minimizing insert breakage due to chip build-up.
Chipbreaker Geometry• Reduced machining force• Controlled, coiled chip flow• Higher material removal rate
Application• Quickly inserted into adjustable blades• For cut-off and grooving• Fair for interrupted cuts
Cut-Off & Grooving Inserts
Desc.DC656
InsertSize
LeadAngle
Width .004 -
Part No.733101- in mm
SGTR-2-8 82250 2 8º .087 2mmSGTN-3 82226 3 0º .122 3mmSGTR-3-8 82254 3 8º .122 3mmSGTN-4 82230 4 0º .161 4mmSGTR-4-8 82258 4 8º .161 4mmSGTR-5-8 82262 5 8º .201 5mmSGTR-6-8 82266 6 8º .252 6mm
The square shank design of the Cut-Off toolholder ensures a precise center line of the insert with respect to the center of the work-piece. When the toolholder is mounted directly on the CNC turret. Inserts are securely held in Slot Grip toolholders by a tapered locking system. No additional clamping devices are required. Slot Grip Cut-Off toolholders come in a broad selection of shank sizes.
150°
A
HH1
WW
L
7°
D
The square shank design of the Cut-Off toolholder ensures a precise center line of the insert with respect to the center of the work-piece. When the toolholder is mounted directly on the CNC turret. Inserts are securely held in Slot Grip toolholders by a tapered locking system. No additional clamping devices are required. Slot Grip Cut-Off toolholders come in a broad selection of shank sizes.
Neutral Cut-Off Toolholder
DescriptionPart No.733101- Blade
UsedScrew UsedNeutral
SGTBN12,7-2 62970 SGIH19-2ASHCSFP-
050-080-025-MA
SGTBN19-5 62973SGIH26-2
THRUSGIH26-6
ASHCSFP-060-100-030-MA
SGTBN25-4-6 69275SGIH32-3
THRUSGIH32-9
ASHCSFP-060-100-040-MA
Blade & Insert SetSet Desc.
Set Part No.733101-
(1) Blade
(10) Inserts
SGTHR26-3 85360 SGIH26-3 SGTN-3SGTHR32-3 85364 SGIH32-3 SGTN-3
Blade, Toolholder & Insert SetSet Desc.
Set Part No.733101-
(1) Blade
(10) Inserts
(1) Toolholder
SGTBN19-5S 85326 SGIH26-3 SGTN-3 SGTBN19-5SGTBN25.4-6S 85330 SGIH32-3 SGTN-3 SGTBN25-4-6
4 Visit: www.doriantool.com Call Dorian Tool Oficina Mexico: 52 55 5397 3772 Fax Dorian Tool Oficina Mexico: 52 55 53 62 22 62
MTVO-AThreadingToolholder
Inch Description
UPC No. 733101- Shank SizeR.H.
MTVOR08-3A-A 58122 0.500
MTVOR10-3B-A 58130 0.625
MTVOR12-3B-A 58134 0.750
MTVOR16-3D-A 58138 1.000
MTVOR16-4D-A 58146 1.000
MTVOR20-4D-A 58150 1.250
MTHO-AThreading
Bar
Inch Description
UPC No. 733101- Min. BoreR.H.
S16T-MTHOR-3-A
S20U-MTHOR-4-A
S24U-MTHOR-4-A
58346
58354
58358
1.388
1.656
2.250
MTHO-CThreading
Bar
S16T-MTHOR-3-C
S20U-MTHOR-4-C
S24U-MTHOR-4-C
58300
58308
58312
1.388
1.812
2.250
SE-ThreadingToolholder
Inch Description
UPC No. 733101- Shank SizeR.H.
SER075-5-16SER100-5-16SER125-6-22
584325843658444
0.7501.0001.250
SE-QualifiedThreadingToolholder
SER075-5-16Q 58492 0.750
SER100-6-16Q 58496 1.000
SER125-6-16Q 58500 1.250
NS-Threading
& Grooving-Bar
NSR08-2J 58774 0.500
NSR10-2D 58780 0.625
NSR12-3B 58794 0.750
NSR16-3D 58802 1.000
NSR20-3D 58806 1.250
MTVO-CThreadingToolholder
MTVOR08-3A-C 58012 0.500
MTVOR10-3B-C 58020 0.625
MTVOR12-3B-C 58024 0.750
MTVOR16-3D-C 58028 1.000
MTVOR12-4B-C 58032 0.750
MTVOR16-4D-C 58036 1.000
MTVOR20-4D-C 58040 1.250
NS-Threading
Bar
Inch Description
UPC No. 733101- Bar SizeR.H.
SNR062-60-16 58608 0.750
SNR075-70-16 58612 0.950
SNR100-80-16 58616 1.150
SNR100-80-22 58624 1.500
S-NE-Threading
& Grooving-Bar
S10S-NER-2
S16T-NER-3
S20U-NER-3
S24U-NER-3
58970
58978
58982
58986
1.000
1.375
1.750
2.000
E
W
C
L
Desc.UPC No. 733101-
PKG.
Finger Clamp
CL-5 90680
10CL-6 90681
CL-7 90682
CL-19 90685
Negative Lock Pin
NL-23 90472
10NL-33 90473
NL-44 90478
Finger Clamp Screw
XNS-36 90901
XNS-36 90902 10
Spare Parts
Desc.UPC No. 733101-
PKG.
Threading Insert Torx Screw
GTS-1 90965
10GTS-2 90966
GTS-3 90967
Torx Key
T-10 92005
10T-15 92006
T-20 92007
Threading Shim Seats
GX-16-1 9038010
NX-22-1 90381
DorNotch Clamp
CM-72 90694
10
CM-73 90695
CM-74 90692
CM-75 90693
S310 90700
S410 90701
Threading Inserts, Toolholders , Bars & Spare Parts
TNMA / TNMC - On Edge Threading Inserts
NV “V” Thread Negative Rake
Desc.
Dorian Insert Grade
DVK10 DVP656
UPC No. 733101-
UPC No. 733101-
TNMA-32NV 72529 72528
TNMA-43NV 72536 72535
TNMA-54NV 72557 72556
TNMC-32NV 72004 72003
TNMC-43NV 72011 72010
TNMC-54NV 72032 72031
TPMA / TPMC - On Edge Threading Inserts
NV “V” Thread Positive Rake
Desc.
Dorian Insert Grade
DVK10 DVP656
UPC No. 733101-
UPC No. 733101-
TPMA-32NV 73394 73393
TPMA-43NV 73401 73400
TPMA-54NV 73415 73414
TPMC-32NV 73056 73055
TPMC-43NV 73063 73062
TPMC-54NV 73077 73076
NT-60° - DorNotch Threading Inserts
NT - 60° “V” Thread Neutral Rake Angle
Desc.
Dorian Insert Grade
DVK10 DVP656
UPC No. 733101-
UPC No. 733101-
NT-2R- 82901 82900
NT-2L- 82905 82904
NT-3R- 82909 82908
NT-3L- 82913 82912
NTP-60° - DorNotch Threading Inserts
NT - 60° “V” Thread Positive “V” Thread
Desc.
Dorian Insert Grade
DVK10 DVP656
UPC No. 733101-
UPC No. 733101-
NTP-2R- 82925 82924
NTP-2L- 82928 82929
NTP-3R- 82933 82932
NTP-3L- 82937 82936
Ext. 60º Laydown Insert
60° Partial Profile Thread
Desc.
Dorian Insert Grade
DVK10 DVP656
UPC No. 733101-
UPC No. 733101-
16-ER-AG60 74024 74025
22ER-N60 74032 74033
16-IR-AG60 74064 74065
22IR-N60 74088 74089
T
I.C.
60°
T
I.C.
60°
A
55°
5°
60°
ER
T
B
GAGE DIAM.
A
55°
60°
ER
T
B
GAGE DIAM.
5° Pos. Rake Angle
Internal
5 Visit: www.doriantool.com Call Dorian Tool Oficina Mexico: 52 55 5397 3772 Fax Dorian Tool Oficina Mexico: 52 55 53 62 22 62
InsertType
APKT
SDMT
TDEX 45º
TDEX 60º
CEHW
TEHW
SDGX
Milling Inserts
High Speed
General Purpose Heavy Roughing
V
eloceTM
BravoTM ForteTM
Finishing Roughing
DPAT20V & DKAT10VDASP35B & DASK25B
DHP440F & DHK425F
New Coatings Using the latest and most advanced technology for the coating to give the insert the optimum performance in any milling application and materials.
At Dorian Tool we
have created a great
insert to mill a wide
spectrum of
materials including;
Aerospace Inconel,
Titanium &
High Temper Alloys,
Stainless Steel,
Cast Iron,
Copper, Brass,
Hardened Alloy
Steel to HRC 62
Cutting Condition Finishing General Purpose Heavy Roughing
Application Non-Ferrous Ferrous Non-Ferrous Ferrous Non-Ferrous Ferrous
Dorian Insert Grade DKAT10V DPAT20V DASK25B DASP35B DHK425F DHP440F
Description UPC No. 733101- UPC No. 733101- UPC No. 733101-
APKT-1003-PDER - 94837 94840
APKT-1003-PDER-1.2- 94838 94841 94839 94842
APKT-1604-PDER- 94843 94846
APKT-1604-PDER-1.2- 94844 94847 94845 94848
APKT-1505-PDER- 94861 94864 94863
APKT-1505-PDER- 94862 94865 94866
SDMT-1205-ER-1.2- 95911 95913 95907
TDEX-110204-EN 94523 95426 95428
TDEX-110208-EN 95432 95436 95438
TDEX-160304-EN 95442 95446 95448
TDEX-160308-EN 95452 95456 95458
TDEX-220404-EN 95462 95466 95468
TDEX-220408-EN 95472 95476 95478
TDEX-090202-EN 95492 95495 95496
TDEX-090204-EN 95502 95505 95506
TDEX-17T304-EN 95512 95515 95516
TDEX-17T308-EN 95522 95525 95526
TDEX-250404-EN 95532 95536 95538
TDEX-250408-EN 95542 95545 95548
CEHW-0602-AEER- 95553 95555 95556
CEHW-0602-AEEL- 95573 95575 95576
CEHW-1204-AEER- 95563 95565 95566
CEHW-1204-AEEL- 95583 95585 95586
TEHW-0602-AEEN- 95593 95595 95596
SDGX-09C01-E- 95299 95298
SDGX-09C02-E- 95303 95302
SDGX-09C03-E- 95307 95306
SDGX-09C04-E- 95311 95310
SDGX-09C05-E- 95250 95248
SDGX-09C06-E- 95254 95252
SDGX-09C07-E- 95258 95256
SDGX-09C08-E- 95262 95260
SDGX-09C09-E- 95266 95264
SDGX-09C10-E- 95270 92568
SDGX-09C11-E- 95274 95272
SDGX-09C12-E- 95278 95276
SDGX-09C13-E- 95282 95280
SDGX-09C14-E- 95286 95284
SDGX-09C15-E- 95290 95288
SDGX-09C16-E- 95294 95292
6 Visit: www.doriantool.com Call Dorian Tool Oficina Mexico: 52 55 5397 3772 Fax Dorian Tool Oficina Mexico: 52 55 53 62 22 62
Convex Radius Cutter
DescriptionUPC. No.733101-
Cut.Dia
ShankSize
InsertQty.
SDGXGage Insert
QV-062-S304-050 65101 0.625 0.500 109T308
QV-062-S304-062 65103 0.625 0.625 1
QV-100-S608-075 65118 1.000 0.750 1
190408QV-100-S608-100 65120 1.000 1.000 1
QV-200-S608-100 65122 2.000 1.000 3
QV-100-S612-075 65124 1.000 0.750 1
190408QV-100-S612-100 65126 1.000 1.000 1
QV-200-S612-100 65128 2.000 1.000 3
QV-100-S616-075 65130 1.000 0.750 1
190408QV-100-S616-100 65132 1.000 1.000 1
QV-200-S616-100 65134 2.000 1.000 3
Double 45° Indexable Chamfer Mill
DescriptionPart No.733101-
Cut.Dia
ShankSize
InsertQty.
SDGWGage Insert
C45-062-SD09-062 65412 0.625 0.625 1
190308
C45-075-SD09-062 65413 0.750 0.625 1
C45-112-SD09-075 65414 1.125 0.750 2
C45-125-SD09-075 65416 1.250 0.750 2
C45-150-SD09-100 64518 1.500 1.000 3
C45XL-112-SD09-075 65420 1.125 0.750 2190308
C45XL-150-SD09-100 65421 1.500 1.000 3
Indexable Woodruff Key Seat Cutter
DescriptionPart No.733101-
Cut.Dia
ShankSize
InsertQty.
TEHWGage Insert
DWKC-606-TEO6-050 65140 0.750 0.500 20602
DWKC-806-TEO6-050 65141 0.750 0.500 2DWKC-807-TEO6-050 65144 0.875 0.500 2 0602DWKC-708-TEO6-050 65146 1.000 0.500 3
0602DWKC-1008-TEO6-050 65148 1.000 0.500 3DWKC-609-TEO6-050 65150 1.125 0.500 4
0602DWKC-809-TEO6-050 65152 1.125 0.500 4DWKC-610-TEO6-050 65154 1.250 0.500 6
0602DWKC-810-TEO6-050 65156 1.250 0.500 6DWKC-811-TEO6-050 65159 1.375 0.500 6 0602
60°, 82°, 90° Indexable Countersink
DescriptionPart No.733101-
ShankSize
Cut.Dia
InsertQty.
TDGH & TPGH Gage Insert
60°CS60-TH5-037 65300 .375 .125 1 TDGH 520
CS60-TH2-037 65302 .375 .250 1 TDGH 21.51
CS60-TH3-050 65304 .500 .500 1 TDGH 321
CS60-TH3-075 65307 .750 .600 1 TDGH 321
82°CS82-TH5-037 65308 .375 .125 1 TDGH 520
CS82-TH2-037 65310 .375 .250 1 TDGH 21.51
CS82-TH3-050 65312 .500 .500 1 TDGH 321
CS82-TH3-050 65315 .750 .600 1 TDGH 321
90°CS90-TH5-037 65316 .375 .125 1 TDGH 520
CS90-TH2-037 65318 .375 .250 1 TDGH 21.51
CS90-TH3-050 65320 .500 .500 1 TDGH 321
CS90-TH3-050 65323 .750 .560 1 TDGH 321
30º, 45º , 60º Indexable Chamfer Mill
DescriptionPart No.733101-
Cut.Dia
ShankSize
InsertQty.
TPHTGage Insert
30°
C30-062-TP3-075 65400 0.625 0.750 2 32.52
45°
C45-075-TP3-075 65402 0.750 0.750 2 32.52
60°
C60-100-TP3-075 65404 1.000 0.750 2 32.52
90° Indexable End Mill
DescriptionPart No.733101-
Cut.Dia
ShankSize
InsertQty.
TC_TGage Insert
E90-200-TC3-075 65800 2.000 0.750 3
32.52E90-200-TC3-100 65802 2.000 1.000 3
E90-200-TC3-R8 65804 2.000 R8 3
90°, 45,° 15° Indexable End Mill
DescriptionPart No.733101-
Cut.Dia
ShankSize
InsertQty.
SHGW-Gage Insert
90°
E90-100-SD09-075
E90-125-SD09-075
E90-150-SD09-075
E90-200-SD12-075
65430
65432
65434
65436
1.00
1.25
1.50
2.00
.750
.750
.750
.750
2
2
2
3
090308
090308
090308
12T308
45°
F45-100-SD09-075
F45-125-SD09-075
F45-150-SD09-075
F45-200-SD12-075
65438
65440
65442
65444
1.00
1.25
1.50
2.00
.750
.750
.750
.750
2
2
2
3
090308
090308
090308
12T308
15°
F15-100-SD09-075
F15-125-SD09-075
F15-150-SD09-075
F15-200-SD12-075
65446
65448
65450
65452
1.00
1.25
1.50
2.00
.750
.750
.750
.750
2
2
2
3
090308
090308
090308
12T308
E90º Indexable End Mill
DescriptionPart No.733101-
Cut.Dia
ShankSize
InsertQty.
RDHWGage Insert
RF-100-RD10-075 65454
1.001.251.502.00
.750
.750
.750
.750
2223
09030809030809030812T308
RF-125-RD10-075 65456
1.001.251.502.00
.750
.750
.750
.750
2223
09030809030809030812T308
RF-150-RD10-075 65458
1.001.251.502.00
.750
.750
.750
.750
2223
09030809030809030812T308
RF-150-RD12-075 65830
1.001.251.502.00
.750
.750
.750
.750
2223
09030809030809030812T308
Milling Cutting Tools
60° Indexable Dovetail Cutter
DescriptionUPC. No.733101-
Cut.Dia
ShankSize
InsertQty.
TDEXGage Insert
D60X-050-TD11-037 65244 0.375 0.500 1
110204D60X-075-TD11-037 65245 0.375 0.750 2
D60X-100-TD11-050 65246 0.500 1.000 3
D60X-137-TD16-062 65247 0.625 1.375 3 160308
D60X-187-TD16-075 65248 0.750 1.875 3 160308
D60X-225-TD22-100 65249 1.000 2.250 3220408
D60X-250-TD22-100 65250 1.000 2.500 3
7 Visit: www.doriantool.com Call Dorian Tool Oficina Mexico: 52 55 5397 3772 Fax Dorian Tool Oficina Mexico: 52 55 53 62 22 62
E90° Extended Indexable Milling Cutter
End Mills
DescriptionPart No.733101-
Cut.Dia
ShankSize
InsertQty.
Flutes Qty.
APKTGage Insert
EX90-075-AP10-075 65680 0.75 0.75 4 1
1003EX90-100-AP10-100 65682 1.00 1.00 8 2
EX90-125-AP10-125 65684 1.25 1.25 12 4
Face Mills EX90A-200-AP16-100 65690 2.00 1.00 6 3
1604
EX90A-250-AP16-100 65692 2.50 1.00 12 4
EX90A-300-AP16-125 65694 3.00 1.25 15 5
EX90A-400-AP16-150 65696 4.00 1.50 18 6
EX90A-500-AP16-150 65698 5.00 1.50 24 8
15° Recycle CNMG End & Face Mill
End Mills
DescriptionPart No.733101-
Cut.Dia
ShankSize
InsertQty.
CNMGGage Insert
R E C 1 5 - 2 0 0 - C N 4 - 0 7 5 65850 2.0 0.75 3432R E C 1 5 - 2 0 0 - C N 4 - 1 0 0 65852 2.0 1.00 3
R E C 1 5 - 2 0 0 - C N 4 - R 8 65854 2.0 R8 3
Face Mills R E C 1 5 A - 3 0 0 - C N 4 - 1 0 0 65856 3.0 1.00 4R E C 1 5 A - 3 0 0 - C N 4 - 1 5 0 65858 4.0 1.50 5 432R E C 1 5 A - 3 0 0 - C N 4 - 1 5 0 65860 5.0 1.50 6
E90° Indexable High Positive End Mill
End Mills
DescriptionPart No.733101-
Cut.Dia
ShankSize
InsertQty.
APKTGage Insert
E90-038-AP10-050 65600 0.375 0.500 1
1003E90-044-AP10-062 65601 0.437 0.500 1
E90-050-AP10-062 65602 0.500 0.625 1
E90-062-AP10-062 65604 0.625 0.625 2
1003
E90-075-AP10-075 65606 0.750 0.750 2
E90-087-AP10-075 65608 0.875 0.750 3
E90-100-AP10-075 65610 1.000 0.750 3
E90-100-AP10-100 65612 1.000 1.000 3
E90-125-AP10-100 65614 1.250 1.000 4
E90-150-AP10-100 65616 1.500 1.000 5
E90-200-AP10-100 65618 2.000 1.000 6
E90-200-AP10-R8 65619 2.000 R8 6
Face Mills E90A-150-AP10-075 65630 1.500 0.750 5
1003E90A-200-AP10-075 65632 2.000 0.750 6E90A-250-AP10-100 65634 2.500 1.000 8E90A-300-AP10-100 65636 3.000 1.000 10
F15°, F30º Indexable Positive End Mill
15º Chamfer End Mills
DescriptionPart No.733101-
Cut.Dia
ShankSize
InsertQty.
APKTGage Insert
F15-125-AP16-075 65710 1.25 0.75 31604F15-150-AP16-100 65712 1.50 1.00 3
F15-200-AP16-R8 65714 2.00 R8 4
15º Chamfer Face Mills F15A-200-AP16-075 65720 2.00 0.75 4
1604F15A-250-AP16-100 65722 2.50 1.00 5F15A-300-AP16-100 65724 3.00 1.00 6F15A-400-AP16-150 65726 4.00 1.50 8F15A-500-AP16-150 65728 5.00 1.50 8
30º Chamfer End MillsF30-125-AP16-075 65730 1.25 0.75 3
1604F30-150-AP16-100 65732 1.50 1.00 3
F30-200-AP16-R8 65734 2.00 R8 4
30º Chamfer Face Mills F30A-200-AP16-075 65740 2.00 0.75 4
1604
F30A-250-AP16-100 65742 2.50 1.00 5
F30A-300-AP16-100 65744 3.00 1.00 6
F30A-400-AP16-150 65746 4.00 1.50 8
F30A-500-AP16-150 65748 5.00 1.50 8
F45°, F75º Indexable Positive End Mill
45º Chamfer End Mills
DescriptionPart No.733101-
Cut.Dia
ShankSize
InsertQty.
APKTGage Insert
F45-125-AP16-075 65754 1.25 0.75 31604F45-150-AP16-100 65756 1.50 1.00 3
F45-200-AP16-R8 65758 2.00 R8 4
45º Chamfer Face Mills F45A-200-AP16-075 65764 2.00 0.75 4
1604F45A-250-AP16-100 65766 2.50 1.00 5F45A-300-AP16-100 65768 3.00 1.00 6F45A-400-AP16-150 65770 4.00 1.50 6F45A-500-AP16-150 65772 5.00 1.50 8
75º Chamfer End MillsF75-125-AP10-075 65778 1.25 0.75 3
1003F75-150-AP10-100 65780 1.50 1.00 3
F75-200-AP16-100 65782 2.00 1.00 3 1604
75º Chamfer Face Mills F75A-200-AP10-075 65786 2.00 0.75 5
1003F75A-300-AP10-100 65788 3.00 1.00 6
F75A-200-AP16-100 65790 2.00 0.75 3
1604F75A-250-AP16-150 65792 2.50 1.00 4
F75A-300-AP16-150 65794 3.00 1.00 5
M90° Indexable Square Face Mill
DescriptionPart No.733101-
Cut.Dia
ShankSize
InsertQty.
SDTMGage Insert
M172D150 65460 1.58 0.75 4
1205
M172D200 65461 1.97 1.00 5
M172D250 65462 2.48 1.00 6
M172D300 65463 3.14 1.50 7
M172D400 65464 3.94 1.50 8
After the cutting edges are used on your turning toolholder, do not throw the insert away. It can be used in these milling cutters to utilize two more cutting edges that were not used in your lathe work.
Milling Cutting Tools & Spare Parts
Spare Parts
Milling Insert Torx Screw Description
UPC No. 733101-
PKG.
TS-06 91306
10
TS-25.45-4M1 90969
TS-25.45-6M1 90970
TS-4.7-6M1 90975
TS-4.7-8M1 90976
TS-1032-5M1 90960
TS-5.8-10M1 90986
8 Visit: www.doriantool.com Call Dorian Tool Oficina Mexico: 52 55 5397 3772 Fax Dorian Tool Oficina Mexico: 52 55 53 62 22 62
RECYCLABLE Face Mill and Turning Set for CNMG Negative Turning Inserts
SetPart No. 733101-
SquareShank Size
MillShank Dia.
Cutdia.
CutDepth
14 Piece Set Includes
(1) 15º Fac Mill (1) Toolholder (10) Inserts (1)Torx Key (1) Storage Box
85530 0.750 0.750 2.00 .450 REC15-200-CN4-075 MCLNR12-4B
T-20 Storage Box85534 1.000 1.000 2.00 .450 REC15-200-CN4-100 MCLNR16-4D CNMG-432-EG-DVK25
85538 1.000 R8 2.00 .450 REC15-200-CN4-R8 MCLNR12-4B
TCMT Turning, Boring, and Milling Set
SetPart No. 733101-
15 Piece Set Includes
(1) 90º End Mill (1) Boring Bar (1) Toolholder (10) Inserts (1)Torx Key (1) Storage Box
85058 E90-200-TC3-075 S12S-STUCR-3 STJCR12-3B TCMT-32.52-UM-DHCP35 T-15 Storage Box
TCMT Turning, Boring, and Milling Set for Manual MachinesWe Are Making Machining Simple For You!
• 3/4" Weldon Shank• 2.0” Cutting Diameter• 5/8” Cutting Depth• 20° Cutting Rake
• 3/4" Square Shank• 4-1/2” Length• 3° Side Cutting Edge Angle • Positive triangle inserts, 7° clearance
• High rate of material removal• Torx screw locking system• Index insert with three (3) cutting edge
• 3/4" Round Shank• 10” Length• .845” Minimum Bore• 3° End Cutting Edge
Angle
TCMT
Set Offers:• 1 90° End Mill• 1 Boring Bar• 1 Toolholder• 10 Inserts
Don’t throw away your CNMG inserts that were only half used on yourturning operations. Use the four (4) unused edges for your
facing operations on your mill with our REC face mill.
Your Old Inserts Are New With Our Tool! Set Offers:• 1 15° Face Mill• 1 Toolholder• 10 Inserts
RECYCLABLE Face Mill and Turning Set
for CNMG Negative Turning Inserts
4 Turning Edges!! 4 Milling Edges!!
X 10PCS.
Turning, Boring and Milling Sets
9 Visit: www.doriantool.com Call Dorian Tool Oficina Mexico: 52 55 5397 3772 Fax Dorian Tool Oficina Mexico: 52 55 53 62 22 62
High Performance Tool Presetters & Tightening Fixture
P382 2 RS232 Serial PortsSend Your Tool Data to a Printer or a PC
• Easy to Operate• Fast & Precise• Reduces Setup Time • Rigid, All- Steel Construction • High Precision Linear Guides and Bearings• CAT, BT, HSK, ISO and VDI Interchangeable Sleeves
UPC 733101- 42004 42006
P382 *DP382N-Z300 *DP382N-Z400
Accuracy +/- .0002
Height Capacity 12" 16"
Diameter Capacity 10"
Measuring Method Contact
Measuring Device High Precision Glass Scales
Number of Different Machine Reference Points
99
Total Tool Memory 9900 Tools
Data Output 2 RS232 ports for PC and Printer
Power input 115 VAC
Warranty 1 Year
*Supplied with CAT40 Tool Sleeve
P368 Highest TechnologyAt The Lowest Price In The Industry
• Reduces Setup Time • Measures All Types of Tools• Excellent Precision & Repeatability• CAT, BT, HSK, ISO and VDI Interchangeable Sleeves
UPC 733101- 42002
P368 *DP368LR-Z300
Accuracy +/- .0005
Height Capacity 12"
Diameter Capacity 10"
Measuring Method Contact
Power input Battery
Warranty 1 Year
*Supplied with CAT40 Tool Sleeve
P499PP 2 RS232 Serial PortsSend Your Tool Data to a Printer or a PC
Standard Features:• Easy to Operate
• Quick-Set Positioning
• Tool/Insert Edge/Angle Measurement (2 Points)
• Tool/Insert Radius Measurement (3 Points)
• Pneumatic Suction Tool Locking Mechanism
• High Precision Linear Guide Rails and Runner Blocks
• Inch-to-Millimeter Conversion
• Diameter-to-Radius Conversion
UPC 733101- 42008
P499PP DP499 PP Z400
Accuracy +/- .0002
Height Capacity 16"
Diameter Capacity 16"
Measuring MethodShadographProfile Projector(Non-Contact)
Tool Magnification 20X
Measuring DeviceHigh PrecisionGlass Scales
Number of Different Machine Reference Points
99
Total Tool Memory 9900 Tools
Data Output2 RS232 ports for PC and Printer
Power input 115VAC
Warranty 1 Year
*Supplied with CAT40 Tool Sleeve
UPC733101-
DescriptionTool Size
36001 DSTSCH-040 BT-40 CAT-40
36002 DSTSCH-050 BT-50 CAT-50
Left Hand
Vertical
Right Hand
Toolholder Taper Protected From Chips & Scratches
Smart Tool-Setter Tightening Fixture
Pull the Knob to Unlock the Tool-Setter and Rotate to Position.Release the knob to Lock in Place.
• Teflon Based Xylan Coating• Quick Lock & Setting• Multi-Position Setting• Heavy Duty Construction• Precise Quality & Workmanship
Rotate the handle to lock the tool Positively.
10 Visit: www.doriantool.com Call Dorian Tool Oficina Mexico: 52 55 5397 3772 Fax Dorian Tool Oficina Mexico: 52 55 53 62 22 62
1 Small Diameter Diamond Cutting Knurling Tool
Supplied with 1 set of straight knurl wheels, 30 TPI for diamond pattern. Description
UPC No.733101-
Knurl Wheel Style
Shank Size
Tool Length
CNC-75-1-2 20410 SW2S 3/4 5 1/2
CNC-100-1-2 20420 SW2S 1 6 3/4
CNC-125-1-2 20430 SW2S 1 1/4 7 1/4
2 Heavy Duty Diamond Cutting Knurling Tool
Supplied with 1 set of straight knurl wheels, 25 TPI for diamond pattern. Description
UPC No.733101-
Knurl Wheel Style
Shank Size
Tool Length
CNC-75-2-R 20510 RS 3/4 5 1/2
CNC-100-2-R 20520 RS 1 6 3/4
CNC-125-2-R 20530 RS 1 1/4 7 1/4
3 Extra Heavy Duty Diamond Cutting Knurling Tool
Supplied with 1 set of straight knurl wheels, 25 TPI for diamond pattern. Description
UPC No.733101-
Knurl Wheel Style
Shank Size
Tool Length
CNC-75-3-M 20610 MS 3/4 5 5/8
CNC-100-3-M 20620 MS 1 6 7/8
CNC-125-3-M 20630 MS 1 1/4 7 3/8
4 Double Wheel Forming Knurling Tool
Supplied with 1 set of straight knurl wheels, 25 TPI for diamond pattern. Description
UPC No.733101-
Knurl Wheel Style
Shank Size
Tool Length
CNC-75-4-M 20646 MS 3/4 6
CNC-100-4-M 20648 MS 1 6
CNC-125-4-M 20650 MS 1 1/4 6.5
5 Single Wheel Forming Knurling Tool
Supplied with 1 set of straight knurl wheels, 25 TPI for diamond pattern. Description
UPC No.733101-
Knurl Wheel Style
Shank Size
Tool Length
CNC-75-5-O 20710 O 3/4 5 1/2
CNC-100-5-O 20720 O 1 6 3/4
CNC-125-5-O 20730 O 1 1/4 7 1/4
6 Shoulder Forming Knurling Tool
Supplied with 1 set of straight knurl wheels, 25 TPI for diamond pattern. Description
UPC No.733101-
Knurl Wheel Style
Shank Size
Tool Length
CNC-75-7-R 20910 SW3.5 3/4 5 1/2
CNC-100-7-R 20920 SW3.5 1 6 3/4
CNC-125-7-R 20930 SW3.5 1 1/4 7 1/4
7 Straddle Forming Knurling Tool
Supplied with 1 set of straight knurlwheels, 30 TPI for diamond pattern. Description
UPC No.733101-
Knurl Wheel Style
Shank Size
Tool Length
CNC-75-7-R 20910 R 3/4 5 3/4
CNC-100-7-R 20920 R 1 7
CNC-125-7-R 20930 R 1 1/4 7 1/2
CNC Modular Knurling Tool Applications CNC Modular Knurling Tools
Best for knurling against a shoulder
� Diamond Pattern
� Straight Pattern
� Shoulder Knurling
� Feed Range: .004 to .012
� In feed and end feed
� Diamond Pattern
� Straight Pattern
� Feed Range: .004 to .012
� In feed and end feed
� Unrestricted diameter
� Straight pattern
� Male diamond pattern
� Female diamond pattern
� In feed and End feed
Straight bumpBest for narrow knurling
� Large diameter
� Diamond pattern
� End feed
� Feed range: .004 to .025
Extra heavy duty cutting range 2.0" & upBest for over 2-1/2"
Heavy duty cutting range 1.0" to 5"
Small cutting range 5/16" to 1-1/2"Best for up to 1"
Best for up to 3"
� Small diameter
� Diamond pattern
� End feed
� Feed range: .004 to .012
� Medium diameter
� Diamond pattern
� End feed
� Feed range: .004 to .016
CNC-000-1-2
CNC-000-2-R
CNC-000-3-M
CNC-000-5-O
CNC-000-6-3
CNC-000-7-R
Small diameter range: up to 1"Best for small diameter, long parts, and special applications
Shoulder diameter range: 5/16" & up
Knurling Tools
11 Visit: www.doriantool.com Call Dorian Tool Oficina Mexico: 52 55 5397 3772 Fax Dorian Tool Oficina Mexico: 52 55 53 62 22 62
SWFKT - Single Wheel Fixed Knurling Tool
DescriptionUPC No.
733101-
Knurl Wheel Style
Knurl Pin Set CH & SinchDesc.
UPC No.733101-
SWFKT-50-D 21730 D* KPS-18-50 28805 1/2SWFKT-75-M 21740 M** KPS-31-75 28840 3/4SWFKT-100-O 21750 0** KPS-31-100 28845 1
* Supplied with 1 Straight Knurl Wheel 30 TPI. ** Supplied with 1 Straight Knurl Wheel 25 TPI.
• Precision square shank with preset center height.
• Single wheel knurling tool for general purposes.
• Knurl wheel is mounted between the thrust wash-ers to ensure a smooth and even rotation of the knurls while knurling is performed.
• Straight and Diamond knurl pattern.
FKT - Fixed Knurling Tool
DescriptionUPC No.
733101-
Knurl Wheel Style
Knurl Pin Set CH & SinchDesc.
UPC No.733101-
FKT-50-D 21920 D* KPS-18-50 28805 1/2FKT-75-M 21930 M** KPS-31-75 28840 3/4FKT-100-M 21940 M** KPS-31-75 28840 3/4
* Supplied with 1 set of 30 TPI Diagonal Knurl Wheels for Diamond Pattern.** Supplied with 1 set of 25 TPI Diagonal Knurl Wheels for Diamond Pattern.
• Precision square shank with preset center height.
• Twin knurl wheels for Straight and Diamond pattern.
• Knurl wheels are mounted between the thrust washers to ensure a smooth and even rotation of the knurls while knurling is performed.
SCKN - Self-Centering Knurling Tool for C.N.C. Lathe
DescriptionUPC No.
733101-
Knurl Wheel Style
Knurl Pin Set CH & SinchDesc.
UPC No.733101-
SCKN-50-D 22111 D* KPS-18-50 28805 1/2SCKN-75-M 22121 M** KPS-31-75 28840 3/4SCKN-100-M 22131 M** KPS-31-75 28840 1
* Supplied with 1 set of 30 TPI Diagonal Knurl Wheels for Diamond Pattern.** Supplied with 1 set of 25 TPI Diagonal Knurl Wheels for Diamond Pattern.
• Specifically designed for CNC lathe.
• Precision square shank with preset center height.
• Twin knurl wheels for Straight and Diamond pattern.
• Knurl wheels are mounted between the thrust washers to ensure a smooth and even rotation of the knurls while knurling is performed.
• Self-centering knurling head for a precise alignment to the working part.
SSCK -Shoulder Self-Centering Knurling Tool for C.N.C. Lathe
DescriptionUPC No.
733101-
Knurl Wheel Style
Knurl Pin Set CH & SinchDesc.
UPC No.733101-
SSCK-50-2 22220 SW2* SW2.0P-2S 29055 1/2SSCK-75-4 22240 SW4** SW4.0P-2S 29085 1SSCK-100-4 22250 SW4** SW4.0P-2S 29085 1
3SHKT - Three Swivel Head Knurling Tool
DescriptionUPC No.
733101-
Knurl Wheel Style
Knurl Pin Set CH & SinchDesc.
UPC No.733101-
3SHKT-50-D 21510 D* KPS-18-50 28805 1/23SHKT-75-M 21530 M** KPS-31-100 28845 3/43SHKT-100-M 21540 M** KPS-31-100 28845 1
KTW109 - Straddle Square Shank Holder
DescriptionUPC No.
733101-
Knurl Wheel Style
Knurl Pin Set CH & SinchDesc.
UPC No.733101-
KTW109-75-2-4 22810 D* KPS-18-50 28805 1/2KTW109-100-2-4 22820 M** KPS-31-75 28840 3/4
• Precision square shank with preset center height.
• Three sets of twin knurl wheels for Straight and Diamond pattern.
• Knurl wheels are mounted between the thrust washers to ensure a smooth and even rotation of the knurls while knurling is performed.
• With three pairs of knurl wheels and a swivelling head, changing knurl wheels requires less time.
• Can be reversed for right or left hand operation.
* Supplied with 1 set of 30 TPI Diagonal Knurl Wheels for Diamond Pattern.** Supplied with 1 set of 25 TPI Diagonal Knurl Wheels for Diamond Pattern.
• Specifically designed for CNC Lathe.
• Designed to knurl against a square shoulder.
• Precision square shank with preset center height.
• Twin knurl wheels for Straight and Diamond pattern.
• Knurl wheels are mounted between the thrust washers to ensure smooth and even rotation of the knurls while knurling is performed.
• Self-centering knurling head for a precise alignment to the working part.
* Supplied (2) 20 TPI, (2) 30 TPI & (2) 40 TPI Diagonal Knurl Wheels for Diamond Pattern.** Supplied (2) 16 TPI, (2) 25 TPI & (2) 35 TPI Diagonal Knurl Wheels for Diamond Pattern.
Supplied with 1 set of Diagonal Knurl Wheels 25 TPI for Diamond Pattern.
• Precision square shank with preset center height.
• Self-Centering knurling head for a precise alignment to the working part.
• Can be reversed for right or left hand operation.
Knurling Tools
12 Visit: www.doriantool.com Call Dorian Tool Oficina Mexico: 52 55 5397 3772 Fax Dorian Tool Oficina Mexico: 52 55 53 62 22 62
• Multi-position locking handle Adjustment
• Anti-Rotation mounting
• Super precision toolholder locking
• Repeatability within millionths
• Thousands of pounds of locking force with a finger tip
SUPER Quick Change Tool Postwith Triple Action Wedge Style Locking System
Rigidity• Repeatability• Quality•
SUPER Quick Change Tool Post
T
C.H.
D
E
A - SQUARE
B
C
THREAD
Description SDN25AXA SDN30BXA SDN35CXA SDN40CA SDN50DA SDN60EAPart No. 733101- 01000 01002 01004 01006 01008 01010Size in mm in mm in mm in mm in mm in mm
Lathe Swing Over Bed ≤12 ≤300 13-15 330-380 14-17 350-430 16-20 400-500 17-32 430-810 ≥25 ≥635
A 2.625 66.67 3.000 76.2 3.500 88.90 4.000 101.60 5.000 127.00 6.000 152.4
B 2.500 63.5 2.750 69.9 3.250 82.60 3.750 95.25 4.625 117.48 5.000 127.0
C 4.240 107.7 4.710 119.6 5.650 143.51 6.335 160.91 7.435 188.85 8.060 204.72
D 0.500 12.7 0.625 16.0 0.750 19.0 0.875 22.23 1.000 25.40 1.125 28.6
E 0.880 22.35 1.115 28.32 1.199 30.45 1.530 38.86 1.900 48.26 2.207 56.06
T-Tool Capacity* 1/2-3/4 12-20 5/8-1.0 16-25 3/4-1.0 20-25 1.0-1¼ 25-32 1¼-1½ 32-40 1 1/2 40
Optimim C.H.** 1.250 31.75 1.312 33.32 1.625 41.28 1.937 49.20 2.562 65.07 3.000 76.20
C.H. MIN. 0.875 22,2 1.062 27,0 1.250 31,8 1.562 39.7 2.000 50.80 2.500 63.5
C.H. MAX. 1.875 47.63 1.937 49,20 2.250 57.75 2.562 65.07 3.575 85.73 3.500 88.90
Thread 1/2-20 M12x1,75 5/8-18 M16x2,0 3/4-16 M18x2,5 7/8-14 M20x1,5 1.0-14 M24x3,0 1�-12 M27x3,0
* Higher tool capacity specified in this chart is achieved with the oversized turning and facing toolholder, D1S. ** Optimum center height is calculated with the smaller tool size of the tool capacity. If the higher size tool is to be used, add 1/8˝ to the optimum center height.
Zero Backlash•
Triple Action Wedge Style Locking System•
Precise Repeatability within .0001•
15º Locking Handle Position Adjustment•
Industry-Standard Interchangeable Holders•
13 Visit: www.doriantool.com Call Dorian Tool Oficina Mexico: 52 55 5397 3772 Fax Dorian Tool Oficina Mexico: 52 55 53 62 22 62
SUPER Quick Change Toolholders & Turning Set
14 Visit: www.doriantool.com Call Dorian Tool Oficina Mexico: 52 55 5397 3772 Fax Dorian Tool Oficina Mexico: 52 55 53 62 22 62
Laydown Threading Bar Sold Separately
Use With SDN Tool Post SDN25AXA SDN30BXA SDN35CXA SDN40CA SDN50DA SDN60EA
No. D1: Turning & Facing Toolholder Desc.
D25AXA-1 D30BXA-1 D35CXA-1 D40CA-1 D50DA-1 D60EA-1
Tool Capacity
1/2"
12mm
Tool Capacity
5/8”
16mm
Tool Capacity
3/4”
20mm
Tool Capacity
1”
25mm
Tool Capacity
1 1/4”
32mm
Tool Capacity
1 1/2”
40mm
Part No.733101- 01100 01250 01400 01550 01700 01850
No.D2: Turning, Facing and Boring Toolholder Desc.
D25AXA-2 D30BXA-2 D35CXA-2 D40CA-2 D50DA-2 D60EA-2
Tool Capacity
1/2"
12mm
Tool Capacity
5/8”
16mm
Tool Capacity
3/4”
20mm
Tool Capacity
1”
25mm
Tool Capacity
1 1/4”
32mm
Tool Capacity
1 1/2”
40mm
Part No.733101- 01104 01254 01404 01554 01704 01854
No.D4-CNC: Heavy Duty Boring Bar Toolholder Desc.
D25AXA-4-CNC D30BXA-4-CNC D35CXA-4-CNC D40CA-4-CNC D50DA-4-CNC D60EA-4-CNC
Tool Capacity
3/4"
20mm
Tool Capacity
1"
25mm
Tool Capacity
1"
25mm
Tool Capacity
1 1/4"
32mm
Tool Capacity
1 1/2”
40mm
Tool Capacity
2”
50mm
Inch Part No.733101- 01110 01260 01410 01560 01710 01860
No.D5: Morse Taper Toolholder Desc.
D25AXA-5-2 D30BXA-5-3 D35CXA-5-4 D40CA-5-4 D50DA-5-5 D60EA-5-5
Tool CapacityMorse Taper 2
Tool CapacityMorse Taper 3
Tool CapacityMorse Taper 4
Tool CapacityMorse Taper 4
Tool CapacityMorse Taper 5
Tool CapacityMorse Taper 5
Part No.733101- 01122 01272 01424 01572 01722 01872
No.D7-71C: Extra Heavy Duty Cut-Off Blade Toolholder Desc. D25AXA-7-71C D30BXA-7-71C D35CXA-7-71C D40CA-7-71C D50DA-7-71C D60EA-7-71C
Blade Size
19-2
Blade Size
19-2
Blade Size
26-2 to 26-6
Blade Size
26-2 to 26-6
Blade Size
32-3 to 32-9
Blade Size
32-3 to 32-9
Part No.733101- 01126 01276 01428 01576 01726 01876
No.D881: ID & OD Threading Toolholder Desc.
OnEdge
D25AXA-881-OE
Laydown
D25AXA-881-LD
OnEdge
D30BXA-881-OE
Laydown
D30BXA-881-LD
OnEdge
D35CXA-881-OE
Laydown
D35CXA-881-LD
OnEdge
D40CA-881-OE
Laydown
D40CA-881-LD
For On Edge Insert Part No.733101- 01132 01282 01434 01582
For Laydown Insert Part No.733101- 01133 01283 01435 01583
For more technical specifications, refer to our SUPER Quick Change Tool Post Catalog or call us at 800-627-0266. Specifications subject to change without notice.
SDN Turning Sets
Tooling Not Included
Part No.733101- 01014 01015 01016 01017 01018 01019
Desc. SDN25AXA-TS SDN30BXA-TS SDN35CXA-TS SDN40CA-TS SDN50DA-TS SDN60EA-TS
Lathe Swing Up to 12" 13" to 15" 14" to 17" 16" to 20" 17" to 32" ≥ 25"
Set Includes
(1) Tool Post SDN25AXA SDN30BXA SDN35CXA SDN40CA SDN50DA SDN60EA
(4) Holders(2) D25AXA-1(2) D25AXA-2
(2) D30BXA-1(2) D30BXA-2
(2) D35CXA-1(2) D35CXA-2
(2) D40CA-1(2) D40CA-2
(2) D50DA-1(2) D50DA-2
(2) D60EA-1(2) D60EA-2
(1) Tool Post
(4) Holders
D1
D2
D1
D2
Victory™ Automatic Thru Coolant Tool Post
Description V25tc V30tc V35tc V40tc V50tc V60tcPart No. 733101- 04200 04201 04202 04203 04204 04205Size in mm in mm in mm in mm in mm in mm
Lathe Swing Over Bed ≤12 ≤300 13-15 330-380 14-17 350-430 16-20 400-500 17-32 430-810 ≥25 ≥635
A 2.500 63.5 3.000 76.2 3.500 88.90 4.000 101.60 5.000 127.00 6.000 152.4
B 2.500 63.5 2.750 69.9 3.250 82.60 3.750 95.25 4.625 117.48 5.000 127.0
C 4.240 107.7 4.710 119.6 5.650 143.51 6.335 160.91 7.435 188.85 8.060 204.72
D 0.500 12.7 0.625 16.0 0.750 19.0 0.875 22.23 1.000 25.40 1.125 28.6
E 0.880 22.35 1.115 28.32 1.199 30.45 1.530 38.86 1.900 48.26 2.207 56.06
T-Tool Capacity 1/2-3/4 12-20 5/8-1.0 16-25 3/4-1.0 20-25 1.0-1¼ 25-32 1¼-1½ 32-40 1 1/2 40
Optimim C.H.* 1.250 31.75 1.312 33.32 1.625 41.28 1.937 49.20 2.562 65.07 3.000 76.20
C.H. MIN. 0.875 22,2 1.062 27,0 1.250 31,8 1.562 39.7 2.000 50.80 2.500 63.5
C.H. MAX. 1.875 47.63 1.937 49,20 2.250 57.75 2.562 65.07 3.575 85.73 3.500 88.90
Thread 1/2-20 M12x1,75 5/8-18 M16x2,0 3/4-16 M18x2,5 7/8-14 M20x1,5 1.0-14 M24x3,0 1�-12 M27x3,0
* Optimum center height is calculated with the smaller tool size of the tool capacity. If the higher size tool is to be used, add 1/8˝ to the optimum center height.
15º Locking Handle Position Adjustment• Industry-Standard Interchangeable Holders• Automatic Thru Coolant Activation and Shut-off•
Built for the
Speed & Precision of a CNC Lathe
Zero Backlash• Triple Action Locking System• Precise Repeatability within .0001•
T
C.H.
D
E
A - SQUARE
B
C
THREAD
Victory™ Automatic Thru Coolant Tool Post
15 Visit: www.doriantool.com Call Dorian Tool Oficina Mexico: 52 55 5397 3772 Fax Dorian Tool Oficina Mexico: 52 55 53 62 22 62
Victory™ Automatic Thru Coolant Toolholders & Turning Set
16 Visit: www.doriantool.com Call Dorian Tool Oficina Mexico: 52 55 5397 3772 Fax Dorian Tool Oficina Mexico: 52 55 53 62 22 62
Victory™ Thru Coolant Turning Set
Tooling Not Included
Part No.733101- 04184 04185 04186 04187 04188 04189
Desc. V25tc-TS V30tc-TS V35tc-TS V40tc-TS V50tc-TS V60tc-TS
Lathe Swing Up to 12" 13" to 15" 14" to 17" 16" to 20" 17" to 32" ≥ 25"
Set Includes
(1) Tool Post V25tc V30tc V35tc V40tc V50tc V60tc
(4) Holders(2) V25tc-1(2) V25tc-2
(2) V30tc-1(2) V30tc-2
(2) V35tc-1(2) V35tc-2
(2) V40tc-1(2) V40tc-2
(2) V50tc-1(2) V50tc-2
(2) V60tc-1(2) V60tc-2
Laydown Threading Bar Sold Separately
Use With Victory™ Tool Post V25tc V30tc V35tc V40tc V50tc V60tc
No. V1: Turning & Facing Toolholder Desc.
V25tc-1 V30tc-1 V35tc-1 V40tc-1 V50tc-1 V60tc-1
Tool Capacity
1/2"
12mm
Tool Capacity
5/8”
16mm
Tool Capacity
3/4”
20mm
Tool Capacity
1”
25mm
Tool Capacity
1 1/4”
32mm
Tool Capacity
1 1/2”
40mm
Part No.733101- 04210 04230 04250 04270 04290 04305
No.V2: Turning, Facing and Boring Toolholder Desc.
V25tc-2 V30tc-2 V35tc-2 V40tc-2 V50tc-2 V60tc-2
Tool Capacity
1/2"
12mm
Tool Capacity
5/8”
16mm
Tool Capacity
3/4”
20mm
Tool Capacity
1”
25mm
Tool Capacity
1 1/4”
32mm
Tool Capacity
1 1/2”
40mm
Part No.733101- 04211 04231 04251 04271 04291 04306
No.V4-CNC: Heavy Duty Boring Bar Toolholder Desc.
V25tc-4-CNC V30tc-4-CNC V35tc-4-CNC V40tc-4-CNC V50tc-4-CNC V60tc-4-CNC
Tool Capacity
3/4"
20mm
Tool Capacity
1"
25mm
Tool Capacity
1"
25mm
Tool Capacity
1 1/4"
32mm
Tool Capacity
1 1/2”
40mm
Tool Capacity
2”
50mm
Inch Part No.733101- 04212 04232 04252 04272 04292 04307
No.V5: Morse Taper Toolholder Desc.
V25tc-5-2 V30tc-5-3 V35tc-5-4 V40tc-5-4 V50tc-5-5 V60tc-5-5
Tool CapacityMorse Taper 2
Tool CapacityMorse Taper 3
Tool CapacityMorse Taper 4
Tool CapacityMorse Taper 4
Tool CapacityMorse Taper 5
Tool CapacityMorse Taper 5
Part No.733101- 04218 04238 04258 04278 04298 04313
No.V7-71C: Extra Heavy Duty Cut-Off Blade Toolholder Desc. V25tc-7-71C V30tc-7-71C V35tc-7-71C V40tc-7-71C V50tc-7-71C V60tc-7-71C
Blade Size
19-2
Blade Size
19-2
Blade Size
26-2 to 26-6
Blade Size
26-2 to 26-6
Blade Size
32-3 to 32-9
Blade Size
32-3 to 32-9
Part No.733101- 04219 04239 04259 04299 04299 04314
No.V881: ID & OD Threading Toolholder Desc.
OnEdge
V25tc-881-OE
Laydown
V25tc-881-LD
OnEdge
V30tc-881-OE
Laydown
V30tc-881-LD
OnEdge
V35tc-881-OE
Laydown
V35tc-881-LD
OnEdge
V40tc-881-OE
Laydown
V40tc-881-LD
For On Edge Insert Part No.733101- 04220 04240 04260 04280
For Laydown Insert Part No.733101- 04228 04248 04268 04288
For more technical specifications, refer to our VICTORY Tool Post Catalog or call us at 800-627-0266. Specifications subject to change without notice.
(1) Tool Post
(4) Holders
Vtc-1
Vtc-2
Vtc-1
Vtc-2
Thru C
oolant
Thru C
oolant
Thru C
oolant
Thru C
oolant
Thru C
oolant
Thru C
oolant
Thru C
oolant
Description QITP25N QITP30N QITP35N QITP40N QITP50N QITP60NPart No. 733101- 00000 00002 00004 00006 00008 00010Size in mm in mm in mm in mm in mm in mm
Lathe Swing Over Bed ≤12" ≤300,0 13-15" 320,0 14-17" 400,0 16-20" 450,0 17-32" 500,0 ≥25-XHD XHD
A 2.500 63.5 3.000 76.2 3.500 88.9 4.000 101.60 5.000 127.0 6.000 152.4
B 2.570 65.3 3.205 81.4 3.460 87.9 4.070 103.4 5.230 132.8 5.615 142.6
C 5.210 132.3 5.720 145.3 6.415 162.9 7.525 191.1 9.135 232.0 9.855 250.3
D 0.500 12.7 0.500 12.7 0.625 16.0 0.750 19.0 1.000 25.40 1.125 28.6
E 0.880 22.4 1.115 28.3 1.245 31.6 1.530 38.9 1.897 48.2 2.207 56.1
T-Tool Capacity 1/2-3/4 12-20 5/8-1.0 16-25 3/4-1.0 20-25 1.0-1¼ 25-32 1¼ - 1½ 32-40 1 ½ 40.0
Optimim C.H.* 1.422 36.1 1.747 44.4 1.835 46.6 2.202 55.9 2.995 76.1 3.440 87.4
C.H. MIN. 0.995 25.3 1.213 30.8 1.445 36.7 1.757 44.6 2.245 57.0 2.750 69.9
C.H. MAX. 1.849 50.0 2.282 58.0 2.225 56.5 2.646 67.2 3.744 95.1 4.129 104.9
Thread 1/2-20 M12x1,75 1/2-20 M12x1,75 5/8-18 M16x2,0 3/4-16 M18x2,5 1.0-14 M24x3,0 1� -12 M27x3,0
*Optimum center height is calculated with the smaller tool size of the tool capacity.
O.D. Chamfering Operations15º Increments
Combination O.D. & I.D. Operations
I.D. Turning Operations
O.D. Turning Operations
The Mulit-Patented Tool Post with The Most Advantaged Indexing and Locking Technology
Quadra Indexing and Quick Change Tool Post
Locking and Indexing System24 Super Precise Positioning Ball Bearings
& 2 Pre-Loaded Indexing Pins
Strong - Rigid - Precise! Quick & Versatile for
Any Operation
Quadra Indexing Quick Change Tool Post
17 Visit: www.doriantool.com Call Dorian Tool Oficina Mexico: 52 55 5397 3772 Fax Dorian Tool Oficina Mexico: 52 55 53 62 22 62
Quadra Indexing Quick Change Toolholders & Turning Set
18 Visit: www.doriantool.com Call Dorian Tool Oficina Mexico: 52 55 5397 3772 Fax Dorian Tool Oficina Mexico: 52 55 53 62 22 62
Laydown Threading Bar Sold Separately
Use With Quadra Tool Post QITP25N QITP30N QITP35N QITP40N QITP50N QITP60N
No. QITPN1: Turning & Facing Toolholder Desc.
QITP25N-1 QITP30N-1 QITP35N-1 QITP40N-1 QITP50N-1 QITP60N-1
Tool Capacity
1/2"
12mm
Tool Capacity
5/8”
16mm
Tool Capacity
3/4”
20mm
Tool Capacity
1”
25mm
Tool Capacity
1 1/4”
32mm
Tool Capacity
1 1/2”
40mm
Part No.733101- 00100 00250 00400 00550 00700 00850
No.QITPN2: Turning, Facing and Boring Toolholder Desc.
QITP25N-2 QITP30N-2 QITP35N-2 QITP40N-2 QITP50N-2 QITP60N-2
Tool Capacity
1/2"
12mm
Tool Capacity
5/8”
16mm
Tool Capacity
3/4”
20mm
Tool Capacity
1”
25mm
Tool Capacity
1 1/4”
32mm
Tool Capacity
1 1/2”
40mm
Part No.733101- 00104 00254 00404 00554 00704 00854
No.QITPN4-CNC: Heavy Duty Boring Bar Toolholder Desc.
QITP25N-4-CNC QITP30N-4-CNC QITP35N-4-CNC QITP40N-4-CNC QITP50N-4-CNC QITP60N-4-CNC
Tool Capacity
3/4"
20mm
Tool Capacity
1"
25mm
Tool Capacity
1"
25mm
Tool Capacity
1 1/4"
32mm
Tool Capacity
1 1/2”
40mm
Tool Capacity
2”
50mm
Inch Part No.733101- 00110 00260 00410 00560 00710 00860
No.QITPN5: Morse Taper Toolholder Desc.
QITP25N-5-2 QITP30N-5-3 QITP35N-5-4 QITP40N-5-4 QITP50N-5-5 QITP60N-5-5
Tool CapacityMorse Taper 2
Tool CapacityMorse Taper 3
Tool CapacityMorse Taper 4
Tool CapacityMorse Taper 4
Tool CapacityMorse Taper 5
Tool CapacityMorse Taper 5
Part No.733101- 00122 00272 00424 00572 00722 00872
No.QITPN7-71C: Extra Heavy Duty Cut-Off Blade Toolholder Desc. QITP25N-7-71C QITP30N-7-71C QITP35N-7-71C QITP40N-7-71C QITP50N-7-71C QITP60N-7-71C
Blade Size
19-2
Blade Size
19-2
Blade Size
26-2 to 26-6
Blade Size
26-2 to 26-6
Blade Size
32-3 to 32-9
Blade Size
32-3 to 32-9
Part No.733101- 00126 00276 00428 00576 00726 00876
No.QITPN881: ID & OD Threading Toolholder Desc.
OnEdge
QITP25N-881-OE
Laydown
QITP25N-881-LD
OnEdge
QITP30N-881-OE
Laydown
QITP30N-881-LD
OnEdge
QITP35N-881-OE
Laydown
QITP35N-881-LD
OnEdge
QITP40N-881-OE
Laydown
QITP40N-881-LD
For On Edge Insert Part No.733101- 00132 00282 00434 00582
For more technical specifications, refer to our MTA Catalog or call us at 800-627-0266. Specifications subject to change without notice.
Quadra Indexing Turning Sets
Tooling Not Included
Part No.733101- 00014 00015 00016 00017 00018 00019
Desc. QITP25N-TS QITP30N-TS QITP35N-TS QITP40N-TS QITP50N-TS QITP60N-TS
Lathe Swing Up to 12" 13" to 15" 14" to 17" 16" to 20" 17" to 32" ≥ 25"
Set Includes
(1) Tool Post QITP25N QITP30N QITP35N QITP40N QITP50N QITP60N
(4) Holders(2) QITP25N-1(2) QITP25N-2
(2) QITP30N-1(2) QITP30N-2
(2) QITP35N-1(2) QITP35N-2
(2) QITP40N-1(2) QITP40N-2
(2) QITP50N-1(2) QITP50N-2
(2) QITP60N-1(2) QITP60N-2
(1) Tool Post
(4) Holders
SDN-1
SDN-2
SDN-1
SDN-2
CNC Adjustable Angle Heads
Style Features Output Shank
Universal
CNC Adjustable
Angle Head
PLCNC-
AAH25
• 4000 RPM max.
• ER25 Collet System
• Capable of machining in two axial positioning angles
• Designed to perform any CNC medium duty operations
• Interchangeable spindle taper holder for CAT, ISO & BT Spindles
ER25
Collet System
ISO40-DIN2080
ISO40-DIN69871
BT40 , CAT40
ISO50-DIN2080
ISO50-DIN69871
BT50 , CAT50
Universal
CNC Adjustable
Angle Head
PLCNC-
AAH32
• 3500 RPM max.
• ER32 Collet System
• Designed to perform any CNC heavy duty operations
• Capable of machining in two axial positioning angles
• Interchangeable spindle taper holder for CAT, ISO & BT Spindles
ER32
Collet System
ISO40-DIN2080
ISO40-DIN69871
BT40 , CAT40
ISO50-DIN2080
ISO50-DIN69871
BT50 , CAT50
90º CNC Adjustable
Angle Head
90CNC-
AAH16
• 4000 RPM max.
• ER16 Collet System
• Fixed 90º angle head with 0- 360º circular rotation
• Interchangeable spindle taper holder for CAT, ISO & BT Spindles
• Designed for precision machining for small to medium tool applications
ER16
Collet System
ISO40-DIN2080
ISO40-DIN69871
BT40 , CAT40
ISO50-DIN2080
ISO50-DIN69871
BT50 , CAT50
90º CNC Adjustable
Angle Head
90CNC-
AAH25
• 3500 RPM max.
• ER25 Collet System
• Designed to perform any CNC medium duty operations
• Fixed 90º angle head with 0-360º circular rotation
• Interchangeable spindle taper holder for CAT, ISO & BT Spindles
ER25
Collet System
ISO40-DIN2080
ISO40-DIN69871
BT40 , CAT40
ISO50-DIN2080
ISO50-DIN69871
BT50 , CAT50
90º CNC Adjustable
Angle Head
90CNC-
AAH32
• 3500 RPM max.
• ER32 Collet System
• Designed to perform any CNC heavy duty operations
• Fixed 90º angle head with 0-360º circular rotation
• Interchangeable spindle taper holder for CAT, ISO & BT Spindles
ER32
Collet System
ISO40-DIN2080
ISO40-DIN69871
BT40 , CAT40
ISO50-DIN2080
ISO50-DIN69871
BT50 , CAT50
90º CNC Adjustable
Angle Head
90CNC-
AAH-TP40
• 2000 RPM max.
• Engineered to accept any CAT, ISO, or BT-40 taper holder.
• Designed to perform any CNC heavy duty operations
• Fixed 90º angle head with 0-360º circular rotation
• Interchangeable spindle taper holder for CAT, ISO & BT Spindles
CAT/ISO/
BT-40
ISO40-DIN2080
ISO40-DIN69871
BT40 , CAT40
ISO50-DIN2080
ISO50-DIN69871
BT50 , CAT50
19 Visit: www.doriantool.com Call Dorian Tool Oficina Mexico: 52 55 5397 3772 Fax Dorian Tool Oficina Mexico: 52 55 53 62 22 62
20 Visit: www.doriantool.com Call Dorian Tool Oficina Mexico: 52 55 5397 3772 Fax Dorian Tool Oficina Mexico: 52 55 53 62 22 62
CNC High Speed Heavy Duty Live Center With 60º Steel Tip
Specifications
48220 PLC-CNC-S60-MT3 3 7000 1386 1144
48221 PLC-CNC-S60-MT4 4 5500 1883 1439
48222 PLC-CNC-S60-MT5 5 4500 2860 2486
48223 PLC-CNC-S60-MT6 6 3200 3740 2508
• Precision Concentricity of TIR .0001" • Lifetime Lubrication • High Speed Precision • Sealed with Lip Seal and Protected by Brass Shield • Longer Life • Quad Bearings
Chromium-Molybdenum Alloy Steel-surface hardened to 62 RC and precision ground for strength and durability.
High-Precision Needle Bearings support the extended spindle body. This reduces deflection, increases rigidity and neutralizes vibration.
Center Shaftmakes the maintenance and bearingreplacement simple when dismounting.
Precision Ball Thrust-Bearingto minimize friction and supportthrust load.
Precision Lip SealPrevents penetration of dirt and coolant. Protected by Brass Shield.
Extended Steel Point
Full Axial Thrust-Bearingload is braced with a large thrust-bearing cageand is supported from the Live Center body.
Precision Ball Bearingwill sustain heavy radial and axial load without compromising precision.
CNC High Speed Heavy Duty Live Center With Extended Point
Specifications
UPC 733101-
DescriptionMorse Taper
Max.RPM
Max. WorkpieceWeight (lbs)
Thrust load (lbs)
48232 PLC-CNC-EXS-MT3 3 7000 1386 1144
48233 PLC-CNC-EXS-MT4 4 5500 1883 1439
48234 PLC-EXS-EXS-MT5 5 4500 2860 2486
48235 PLC-EXS-EXS-MT6 6 3200 3300 2508
Female Cup
Bull Nose Point
Undersized Point
Extended PointEXP
60º Steel PointINP
USP
FCUP
BNP
CNC High Speed Heavy Duty Live Center 6 Piece Set: 1 Live Center Body and 5 Interchangeable Points
Specifications
UPC733101-
Description MorseTaper
Max.RPM
Max. workpieceweight (lb)
Thrustload (lb)
48300 PLC-CNC-INT-MT3-SET 3 6000 1386 1144
48301 PLC-CNC-INT-MT4-SET 4 5000 1883 1439
48302 PLC-CNC-INT-MT5-SET 5 4000 2860 2486
48303 PLC-CNC-INT-MT6-SET 6 3000 3740 2508
Extraction Wrench Supplied
• Precision Concentricity of TIR .0001" • High Speed Precision Quad Bearings • The Bearings are permanently lubricated • Sealed with Lip Seal and Protected by Brass Shield.• Chromium-Molybdenum Alloy Steel • Surface Heat Treated to 62 RC and Precision Ground
Get 5 Applications with 1 Tool
Will Outlast the Leading Competition
Chromium-Molybdenum Alloy Steel surface hardened to 62 RCand precision groundfor strength and durability.
High-Precision Needle Bearing supports the extended spindle body. This reduces deflection, increases rigidity and neutralizes vibration.
Center Shaftmakes the maintenance and bearing replacement simple when dismounting.
Precision Ball Thrust-Bearingto minimize friction and supportthrust load.
Precision Lip Seal Preventspenetration of dirt and coolant. Protected by Brass Shield.
60º Steel Point
Full Axial Thrust-Bearingload is braced with a large thrust-bearing cageand is supported by the Live Center body.
Precision Taper Roller Bearingwill sustain heavy radial and axial loads without compromising precision.
• Precision Concentricity of TIR .00015" • High Speed Precision Triple Bearings • The Bearings are Permanently Lubricated • Chromium-Molybdenum Alloy Steel• Surface Heat Treated to 62 Rc and Precision Ground • Ideal For General Purpose Machining
Precision General Purpose Live Center - High Quality • Long Life • Low Price
Precision Live Center Specifications
UPC733101- Description
Morse Taper
Max. RPM
Max. workpiece weight (lb)
Thrust load (lb)
48200 PLC-PRE-S60-MT1 1 8500 98 365
48201 PLC-PRE-S60-MT2 2 6000 220 792
48202 PLC-PRE-S60-MT3 3 5000 572 1144
48203 PLC-PRE-S60-MT4 4 4000 1078 1320
48204 PLC-PRE-S60-MT5 5 3000 1672 1430
48205 PLC-PRE-S60-MT6 6 2500 3388 3300
CNC High Speed Heavy Duty Live Center - For High Performance CNC Turning Applications
• Precision Concentricity of TIR .00015" • High Speed Precision Triple Bearings • Super Heavy Duty Quad Bearings • The Bearings are Permanently Lubricated• Chromium-Molybdenum Alloy Steel • Surface Heat Treated to 62 RC and Precision Ground
Heavy Duty Live Center - For High Performance Heavy Duty Turning Applications
CNC High Speed Heavy Duty Live Center SET - For High Performance CNC Turning Applications
Heavy Duty Live Center Specifications
UPC733101- Description
Morse Taper
Max. RPM
Max. workpiece weight (lb)
Thrust load (lb)
48206 PLC-HDA-S60-MT2 2 7500 506 1012
48207 PLC-HDA-S60-MT3 3 6000 2090 1144
48208 PLC-HDA-S60-MT4 4 4500 3300 1320
48209 PLC-HDA-S60-MT5 5 2800 4400 2460
48210 PLC-HDA-S60-MT6 6 2000 10560 3300
Chromium-Molybdenum Alloy Steel surface hardened to62 RC and precision ground for strength and durability.
High-Precision Double Needle Bearingssupport the extended spindle body. This reduces deflection, increases rigidity and neutralize vibration.
Center Shaftmakes the maintenanceand bearingsreplacement simple when dismounting.
Precision Ball Thrust-Bearingto minimize friction and supportthrust load.
Precision Lip SealPrevents penetration of dirt and coolant. Protected by Brass Shield.
60º Steel Point
Full Axial Thrust-bearingload is braced with a large thrust-bearing cageand is supported from the Live Center body.
Precision Taper Roller Bearingwill sustain heavy radial and axial load without compromising precision.
High Performance Live Centers
Tool Post Mounting Data
Desc. V25CNCgt-075-9-I V30CNCgt-075-9-I V35CNCgt-100-10-I V40CNCgt-100-10-I V50CNCgt-125-10-I V60CNCgt-125-10-I
UPC No. 733101- 04350 04353 04356 04359 04362 04365
Lathe Swing Over Bed <= 12" 13"-15" 14"-17" 16"-20" 17"-32" >=25"
T-TOOL CAP. 1/2"-5/8" 1/2"-5/8" 3/4"-1.0" 3/4"-1.0" 1.0"-1 1/4" 1.0"-1 1/4"
Centerheight, C.H. 1.000" 1.000" 1.500" 1.500" 2.000" 2.000"
No.of Tools 9 9 10 10 10 10
A Perfect Tool for Perfect Performance
1
3
42
One Set-Up Full Automation 1B
1A
3C
3A
3B
2
4A4B
8 Operations
1. A Facing B Turning 2. Drilling3. A Boring B O.D. Threading C I.D. Threading4. A Grooving B Cut-off
Work-PieceActual Size 2 3/8˝ Diameter
1B1A
2
3A
4A , 4B
3C3B
So Simple!
Go From a Programmable Tool Room Lathe To a
True CNC Turning Center and Back in Seconds
Victory™ CNC Quick Change Gang Tool
21 Visit: www.doriantool.com Call Dorian Tool Oficina Mexico: 52 55 5397 3772 Fax Dorian Tool Oficina Mexico: 52 55 53 62 22 62
22 Visit: www.doriantool.com Call Dorian Tool Oficina Mexico: 52 55 5397 3772 Fax Dorian Tool Oficina Mexico: 52 55 53 62 22 62
Manual & Automated Turrets
Turret Application Type of Lathe Turret Size Tool Size
NVIT
Manual
Turret
• Back-up for automated Turret
• Multi-operation applications
• Prototype production
• Tool room work
• High Precision Applications
• Uni-Directional Indexing
CNC Lathe
NVIT8-50
NVIT8-58
NVIT8-75
.500"
.625"
.750"
Manual Lathe
NVIT8-100
NVIT8-125
1.000"
1.250"
SMARTDEX
ElectroPneumatic
Turret
• Multi-operation applications
• Applications where interfacing with lathe is not an option
• Single step indexing
• Bi-Directional Indexing
• Stand-alone turret
• Stepper motor
• Manually Operated
• Ultra-precision applications
• Programmable control box
• Incremental Encoder
• Fully interfaced with CNC lathe
• Absolute Encoder
• Ultra-precision applications
CNC Lathe
SMARTDEX20N STEP
.750"SMARTDEX
20N PRO
SMARTDEX20N CNC
Manual Lathe
SMARTDEX25N STEP
1.000"SMARTDEX
25N PRO
SMARTDEX25N CNC
POWERDEX
ElectroMechanical Turret
• Fast indexing cycles
• Multi-operation applications
• Fully interfaced with CNC lathe
• Bi-Directional Indexing
• Absolute Encoder
• Ultra-precision applications
CNC Lathe
POWERDEX50N
POWERDEX50N
POWERDEX50N
POWERDEX50N
POWERDEX50N
.500"-.750"
.625"-.750"
.750"-1.000"
1.000"-1.250"
1.250"- 1.500"
23 Visit: www.doriantool.com Call Dorian Tool Oficina Mexico: 52 55 5397 3772 Fax Dorian Tool Oficina Mexico: 52 55 53 62 22 62
Tool Post Mounting Data4th Axis CNC Rotary Tables
4th Axis CNC Rotary Tables More than 5 times the clamping power, rigidity and strength than the closest competition!
2-Year Warranty
• 100% leak proof
• High precision worm-gear
• High precision worm-screw
• Extra Large Thru-Holes
• Excellent Build-Quality
• Extra Heavy Duty for Oil Field Work
• Hydraulic Brake and Pump as Standard
• High Precision Indexing (10 Arcseconds Cumulative)
• Two Double Crossed Roller Bearings for very heavy workholding
• Easy to program Stand-Alone control as an option on each model
• Hand-held control on Stand-Alone Series Rotary Tables• M-Function Activated
4th Axis CNC Rotary Tables
4th Axis Seriers
4th Axis Stand Alone Seriers
Table Diameter
Thru Hole Diameter
CenterHeight
ModelUPC No. 733101- Model
UPC No. 733101- Ø in Ø mm Ø in Ø mm Ø in Ø mm
TGV160 43001 TGV160-i 43007 6.30 160 1.67 42.5 5.31 135
TGV200 43002 TGV200-i 43008 7.87 200 2.03 51.5 5.91 150
TGV250 43003 TGV250-i 43009 9.84 250 2.78 70.5 6.89 175
TGV320 43004 TGV320-i 43010 12.60 320 4.33 110.0 9.06 230
One piece heat treated and
precision ground faceplate and drive shaft provides the
highest rigidity in the industry
Graduated in1º increments
Front Double crossed roller bearings
High tensile strength alloy brass worm gear
Brake pad for thehydraulic brake
Lock nut
Zero positionsensor disc
Rear Double crossed roller bearings
24 Visit: www.doriantool.com Call Dorian Tool Oficina Mexico: 52 55 5397 3772 Fax Dorian Tool Oficina Mexico: 52 55 53 62 22 62
UPC 733101-
Description Shank
35003 DKN-10-075 .750 in
35006 DKN-10-CAT40 CAT40
35012 DKN-10-CAT50 CAT50
35021 DKN-15-100 1.00 in
35024 DKN-15-CAT40 CAT40
35030 DKN-15-CAT50 CAT50
Marking Made Easyas simple as 1.2..3...with the NEW CNC MarkerThe CNC Marker will replace punches, hammers, presses and secondary operations.
You can stamp one million numbers, letters, and logos in less than one second per stroke onto any material on your Manual or CNC Machine.
How to Operate: Load the CNC Marker into the machine spindle. Program to compress the CNC Marker. Once charged, it will launch the internal inertia system. The impact will develop a dynamic pressure causing the marking head to press the steel stamps into the work piece. There is no recoil or damage to the machine spindle due to the advanced damping system of the CNC Marker.
CNC Marker & Dorian Oil Skimmer
Low Temperature
• For turning & machining centers and work areas with tanks containing up to 500 gallons of emulcifiable oil • 1 inch wide polyurethane belt• High performance - Extraction rate of up to 1/2 gal/hr at a maximum temperature of 122°F• Operates at 4.5 volts for safety• Extraction depths of 8”, 24”, & 56”
High Temperature
• For large centralized emulsion tanks & piece washers• 3.2 inch wide Kevlar chain• High performance - Extraction rate of up to 4 gal/hr at a maximum temperature of 212°F• Operates at 12 volts for safety• Extraction Depths of 16”, 32”, & 48”
Dorian Oil Skimmer Increase the life of Your Coolant
By recycling it!
Separated Oil
Coolant & Oil Mixture
Coolant Tank
Dorian Oil Skimmer ExtractionBelt
Max. Operating Tempº F
WarrantyStyle Description
UPC 733101-
Rate gal/hr Depth (A) in
Standard - 8" OIL-SKM-25-200-50-1.5LPH 48000 0.5 8 1" Wide Polyurethane Belt 122
2 YearsStandard - 24" OIL-SKM-25-600-50-1.5LPH 48002 0.5 24 1” Wide Polyurethane Belt 122
Standard - 56" OIL-SKM-25-1400-50-1.5LPH 48004 0.5 56 1” Wide Polyurethane Belt 122
Heavy Duty - 16" OIL-SKM-80-400-50-12.5LPH 48008 4 16 3.2” Wide Polyurethane Belt 122
Heavy Duty - 32" OIL-SKM-80-400-100-12.5LPH 48016 4 32 3.2” Wide Kevlar Chain 212
8" Standard Dorian Oil Skimmer
Stainless Steel Construction to Prevent Rust & Contamination
25 Visit: www.doriantool.com Call Dorian Tool Oficina Mexico: 52 55 5397 3772 Fax Dorian Tool Oficina Mexico: 52 55 53 62 22 62
Tool Post Mounting DataVises, Collets & Holders
DRLK-SERIES VisesThe new DRLK series vises offer two major advantages: wider openings and a new stationary jaw. An integral key and large fasteners reduce deflection by 50%.
CAT End Mill Holders
Each holder comes with an Inspection Lab
Report
Maximum Balance of 20,000 RPMs Style Description
UPC 733101-
HoleDia.(d)
HoleDepth(L1)
Gage Length
(L)
BodyDia.(D)
SetScrew(SS)
CAT40
CAT40 EMH-0375-2500 45017 3/8 1.26 2.50 1.00 3/8-24
CAT40 EMH-0500-2500 45023 1/2 1.50 2.50 1.38 7/16-20
CAT40 EMH-0625-3000 45027 5/8 1.61 3.00 1.65 9/16-18
CAT40 EMH-0750-1750 45030 3/4 1.77 1.75 1.89 5/8-18
CAT40 EMH-1000-2000 45037 1 2.36 2.00 2.25 3/4-16
CAT40 EMH-1250-2000 45040 1-1/4 2.28 2.00 2.25 3/4-16
CAT50
CAT50 EMH-0625-1750 45072 5/8 1.61 1.75 1.65 9/16-18
CAT50 EMH-0750-1750 45077 3/4 1.77 1.75 1.89 5/8-18
CAT50 EMH-1000-2000 45085 1 2.36 2.00 2.36 3/4-16
CAT50 EMH-1250-2000 45089 1-1/4 2.55 2.00 2.75 3/4-16
CAT50 EMH-1500-2250 45093 1-1/2 2.83 2.25 2.75 3/4-16
CAT & BT Taper Shell Mill Holders
Style DescriptionUPC
733101-
HoleDia.(d)
HoleDepth(L1)
Gage Length
(L)
BodyDia.(D)
Arbor Thread
(AT)
CAT40
CAT40 SMH-0750-1750 45121 3/4 0.67 1.75 2.00 3/8-24
CAT40 SMH-1000-1750 45123 1 0.67 1.75 2.38 1/2-20
CAT40 SMH-1500-2000 45127 1-1/2 0.93 2.00 3.80 3/4-16
CAT50
CAT50 SMH-1000-1750 45142 1 0.69 1.75 2.75 1/2-20
CAT50 SMH-1250-4000 45147 1-1/4 0.69 4.00 2.88 5/8-18
CAT50 SMH-1500-2000 45150 1-1/2 0.93 2.00 3.80 3/4-16
DescriptionUPC
733101-
DRLK-6X750 46324
DRLK-6X900 46161
CAT Taper ER Collet Holders
Style DescriptionUPC
733101-ColletRange
Gage Length
(L)
BodyDia.(D)
HoleDepth(L1)
CAT40
CAT40 ER16H-2500 45176 .019-406 2.50 1.26 0.87
CAT40 ER25H-2500 45183 .039-.629 2.50 1.65 1.18
CAT40 ER32H-3125 45187 .078-787 3.13 1.97 1.37
CAT40 ER40H-3125 45192 .118-1.023 3.13 2.48 1.50
CAT50CAT50 ER32H-4000 45208 0.78-787 4.00 1.97 1.34
CAT50 ER40H-4000 45211 .118-10.23 4.00 2.48 1.50
Precision ER Collets Set
DescriptionPart No. 733101-
QtyCollet Range
ER16-CS-0393 46769 10 .019 - .393
ER20-CS-0511 46770 12 0.39-.511
ER25-CS-0629 46771 15 .039 - .629
ER32-CS-0787 46772 18 .078 - .787
ER40-CS-1023 46773 23 .118-1.023
*Collet sizes ER25-STIMC-35, ER25-STIMC-115, ER32-STIMC-35 ,
ER32-STIMC-115 and ER32-STIMC-195 are not included in these sets.
26 Visit: www.doriantool.com Call Dorian Tool Oficina Mexico: 52 55 5397 3772 Fax Dorian Tool Oficina Mexico: 52 55 53 62 22 62
Visit: www.doriantool.com Call Dorian Tool Oficina Mexico: 52 55 5397 3772 Fax Dorian Tool Oficina Mexico: 52 55 53 62 22 62
Today, Dorian Tool offers a robust line of high performance
tooling that serves the needs of a wide range of industries.
We are a leading manufacturer for a
complete line of cutting tools and machine tool accessories:
• Quadra Indexing , Super Quick Change and Thru Coolant
Tool Post, Toolholders and Quick Change Gang Tools
• Knurling Tools for both CNC and Manual Lathes
• Productivity-Enhancing Tool-Presetters
• Indexable Cutting Tools and carbide inserts for virtually
any turning, boring, threading and cut-off application.
• Indexable Drills and Milling Cutters including High
Performance Milling Inserts for all Material Types
• Precision, CNC High Speed and
Super Heavy Duty Live Centers and Bull Nose Heads
• Jet-Stream Thru Coolant Turning,
Threading and Boring Bar Toolholders
• Automation Products including
CNC Rotary Tables and
CNC Turrets
At Dorian tool we have the solution
for all of your tooling needs.
For catalogs featuring the full line of any product from this brochuree-mail: [email protected]