+ All Categories
Home > Documents > Food Waste Disposers - InSinkErator...Unit Finish Waterborne Grey Enamel Overall Height 11-3/8”...

Food Waste Disposers - InSinkErator...Unit Finish Waterborne Grey Enamel Overall Height 11-3/8”...

Date post: 09-Jul-2020
Category:
Upload: others
View: 0 times
Download: 0 times
Share this document with a friend
1
This model offers the following features and benefits: • 1/3 Horsepower Heavy Duty Motor (Quiet Dura-Drive ® Induction Motor) We Come To You ® 1-Year In-Home Limited Warranty • Rugged Galvanized Steel Construction (For Disposer Durability) • Space-Saving Compact Design Submittal Sheet Job Specifications Specifications Type of Feed Continuous On/Off Control Wall Switch Motor Single Phase HP 1/3 Volts 120 HZ 60 RPM 1725 Amp. (Avg. Load) 5.6 Time Rating Intermittent Lubrication Permanently Lubricated Upper & Lower Bearings Shipping Weight (Approx.) 12 lbs. 7oz. Unit Finish Waterborne Grey Enamel Overall Height 11-3/8” Grind Chamber Capacity 26 oz. Motor Manual Reset Protection Overload Average Approx. 1 Gallon per Water Usage Person Per Day Average Electrical Usage 3-4 KWh per Year Drain 1-1/2” Cushioned Connection Slip Joint Dishwasher Drain Connection Yes Food Waste Disposers Dimensions Food Waste Disposer(s) shall be InSinkErator Badger ® 1XT™, continuous feed, with 1/3 H.P. motor, galvanized steel grinding elements with two stainless steel 360° swivel lugs. Exclusive self-service wrench. Warranty: 1- Year parts and in-home service. Sample Specification The complete InSinkErator warranty is included in the Care & Use Booklet packed with each unit. * * Distance from bottom of sink to center line of disposer outlet. Add 1/2" when stainless steel sinks are used. ** Length of tailpipe from center line of disposer outlet to end of tailpipe. NOTE: Plumb waste line to prevent standing water in disposer motor housing. 1-800-558-5700 www.insinkerator.com 4" Dishwasher Drain Connection 5" 6" 11 3 /8" 6 5 /16" H834-15K-83-10 Printed in U.S.A. © 2015 InSinkErator, InSinkErator ® is a business unit of Emerson Electric Co. All Rights Reserved. Food waste disposers can provide an environmentally responsible alternative to transporting food waste to landfills. And they can help reduce greenhouse gas emissions. At capable wastewater treatment plants, food waste can be recycled to produce renewable energy. Additionally, capable wastewater treatment plants can process food waste into fertilizer. (Check the plant in your area.) The Emerson logo is a trademark and service mark of Emerson Electric Co. The mounting collar configuration is a trademark of Emerson Electric Co. Quick Lock ® is a registered trademark of Emerson Electric Co. InSinkErator may make improvements and/or changes in the specifications at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models.
Transcript
Page 1: Food Waste Disposers - InSinkErator...Unit Finish Waterborne Grey Enamel Overall Height 11-3/8” Grind Chamber Capacity 26 oz. Motor Manual Reset Protection Overload Average Approx.

This model offers the following features and benefits:

• 1/3 Horsepower Heavy Duty Motor(Quiet Dura-Drive® Induction Motor)

• We Come To You® 1-Year In-Home Limited Warranty

• Rugged Galvanized Steel Construction(For Disposer Durability)

• Space-Saving Compact Design

Submittal Sheet

Job Specifications

SpecificationsType of Feed Continuous

On/Off Control Wall Switch

Motor Single Phase

HP 1/3

Volts 120

HZ 60

RPM 1725

Amp. (Avg. Load) 5.6

Time Rating Intermittent

Lubrication PermanentlyLubricated Upper &Lower Bearings

Shipping Weight (Approx.) 12 lbs. 7oz.

Unit Finish WaterborneGrey Enamel

Overall Height 11-3/8”

Grind Chamber Capacity 26 oz.

Motor Manual ResetProtection Overload

Average Approx. 1 Gallon perWater Usage Person Per Day

AverageElectrical Usage 3-4 KWh per Year

Drain 1-1/2” CushionedConnection Slip Joint

DishwasherDrain Connection Yes

Food Waste Disposers

Dimensions Food Waste Disposer(s) shall beInSinkErator Badger® 1XT™, continuous feed, with 1/3 H.P. motor, galvanized steel grinding elements with two stainless steel 360° swivel lugs. Exclusive self-service wrench.

Warranty:1- Year parts and in-home service.

Sample Specification

The complete InSinkErator warranty is included in the Care & Use Booklet packed with each unit.

*

* Distance from bottom of sink to center line of disposer outlet. Add 1/2" when stainless steel sinks are used.** Length of tailpipe from center line of disposer outlet to end of tailpipe.

NOTE: Plumb waste line to prevent standing water in disposer motor housing.

1-800-558-5700www.insinkerator.com

4"

DishwasherDrain

Connection

5"

6"

113/8"

65/16"

H834-15K-83-10 Printed in U.S.A. © 2015 InSinkErator, InSinkErator® is a business unit of Emerson Electric Co. All Rights Reserved.

Food waste disposers can provide an environmentally responsible alternative to transporting food waste to landfills. And they can help reduce greenhouse gas emissions. At capable wastewater treatment plants, food waste can be recycledto produce renewable energy. Additionally, capable wastewater treatment plants can process food waste into fertilizer. (Check the plant in your area.)

The Emerson logo is a trademark and service mark of Emerson Electric Co. The mounting collar configuration is a trademark of Emerson Electric Co.

Quick Lock® is a registered trademark of Emerson Electric Co.

InSinkErator may make improvements and/or changes in the specifications at any time, in its sole discretion, without notice or

obligation and further reserves the right to change or discontinue models.

PRESS COLORS

BLACK

P/N: H834-15K-83-10

Date: 10-06-2015

Notes:

Press Info:

Die #:

Recommended