FOOT CONTROL 1307 NEW PART NUMBERS ARE RED AUDIO & VIDEO INDIAN & VICTORY WINDSHIELDS SEATS & SISSY BARS LUGGAGE SECURITY & COVERS TIRES & WHEELS BRAKES CHASSIS SUSPENSION SHEET METAL EXHAUST FUEL & AIR SYSTEMS ENGINE & OIL FILTERS PRIMARY DRIVE TRANSMISSION & FINAL DRIVE GASKETS & HARDWARE HANDLEBARS & CONTROL CABLES FOOT CONTROL INSTRUMENT & LIGHTING ELECTRICAL BATTERIES & CHARGERS TRAILERS & RAMPS CHEMICAL & LUBES TOOLS & SUPPLIES GENERAL ACCESSORIES & DISPLAY CROSS REFERENCE INDEX ROLAND SANDS DESIGN ® SOFTAIL FORWARD CONTROLS RSD forward controls have been a long time in the making. We borrowed some style and function from our rear sets and applied that thought process to the RSD forward controls. The end result is a product that’s at home on a high performance custom as well as any style of bike. An aggressive yet simple design means the RSD controls don’t take over the look of your machine but do exactly what they’re supposed to do, keep you connected to your bike. Race styled bolt-on forward controls Integrated 11/16” bore master cylinder included Hard anodized piston for increased performance and increased wear resistance Billet aluminum construction Folding footpegs, shifter and brake toe pegs included Stainless steel hardware included Kickstand bracket included (Note: 07-Up models require use of 00-06 kickstand assembly) Fits 00-15 FXST Note: May require custom brake line for proper fit. Description P/N Retail Contrast Cut RD5225 849.95 Black-Ops RD5226 849.95 ROLAND SANDS DESIGN ® REAR SETS FOR SPORTSTERS Our racetrack driven RSD Rear Sets for Sportsters are the ultimate improvement for an aggressive foot position. These Rear Sets have RSD’s high quality finish and feature footpegs with race style pivots allowing for a higher lean angle. The mega knurl on our pegs ensure your feet stay planted and your focus remains on the road ahead. High quality fasteners and pivots ensure smooth operation with little effort. Bolt-on Rear Sets foot controls for 04-Up Sportster XL models Completes the RSD “Café Sportster” package of products Moves foot position approximately 2” up, 13” back and 1.5” narrower per side for increased ground clearance when cornering Aggressive rider position Utilizes O.E.M. rear master cylinder Designed to fit seamlessly with RSD Slant 2-into-1 exhaust system Eliminates bulky, heavy O.E.M. cast steel footpeg brackets, bell crank brake rod and master cylinder bracket Black Ops has both textured black and a gloss black finish on one part. It’s aggressive, yet subtle Not compatible with Factory Passenger Pegs Description P/N Retail Contrast Cut RD3033 649.95 Black-Ops RD3034 649.95 Contrast Cut Brake Contrast Cut Clutch Contrast Cut Clutch Black Ops Brake Black Ops Clutch Contrast Cut Brake Contras Clut Contrast Clutch ut Black Ops Brake Cu h Black Ops Clutch Black Ops Clutch Contrast Cut Black Ops SE & C TIR WH BR CH SU AUD & V IND & V WIN SEA SISS LUG Chrome Right Chrome Left Contrast Cut Right Contrast Cut Left PM Contour Foot Controls are designed to work with PM Brake Systems as well as O.E. and other aftermarket brakes CNC machined from billet aluminum Comes with PM’s proven master cylinder PERFORMANCE MACHINE CONTOUR FORWARD CONTROLS HARLEY-DAVIDSON Year Color P/N Retail FXST 00-15 Contrast Cut PM3049 999.95 FXST 00-15 Chrome PM3050 999.95 FXST 00-15 Contrast Cut 2” Ex PM3051 999.95 FXST 00-15 Chrome 2” Ex PM3052 999.95 FXST 84-99 Contrast Cut PM3047 999.95 FXST 84-99 Chrome PM3048 999.95 FXST 84-99 Contrast Cut 2” Ex PM3053 999.95 FXST 84-99 Chrome 2” Ex PM3054 999.95 HARLEY-DAVIDSON Year Color P/N Retail Dynas 91-15 Contrast Cut PM3103 229.00 Dynas 91-15 Chrome PM3104 229.00 Softails 84-15 Contrast Cut PM3103 229.00 Softails 84-15 Chrome PM3104 229.00 Forward Controls Master Cylinder For PM Contour Forward Controls
Transcript
FOOT CONTROL
1307NEW PART NUMBERS ARE RED
AUDIO& VIDEO
INDIAN& VICTORY
WINDSHIELDS
SEATS &SISSY BARS
LUGGAGE
SECURITY& COVERS
TIRES &WHEELS
BRAKES
CHASSIS
SUSPENSION
SHEET METAL
EXHAUST
FUEL & AIRSYSTEMS
ENGINE &OIL FILTERS
PRIMARYDRIVE
TRANSMISSION& FINAL DRIVE
GASKETS &HARDWARE
HANDLEBARS& CONTROL
CABLES
FOOTCONTROL
INSTRUMENT& LIGHTING
ELECTRICAL
BATTERIES& CHARGERS
TRAILERS& RAMPS
CHEMICAL& LUBES
TOOLS &SUPPLIES
GENERALACCESSORIES& DISPLAY
CROSSREFERENCE
INDEX
ROLAND SANDS DESIGN® SOFTAIL FORWARD CONTROLSRSD forward controls have been a long time in the making. We borrowed some style and function from our rear sets and applied that thought process to the RSD forward controls. The end result is a product that’s at home on a high performance custom as well as any style of bike. An aggressive yet simple design means the RSD controls don’t take over the look of your machine but do exactly what they’re supposed to do, keep you connected to your bike.
Race styled bolt-on forward controlsIntegrated 11/16” bore master cylinder includedHard anodized piston for increased performance and increased wear resistanceBillet aluminum constructionFolding footpegs, shifter and brake toe pegs includedStainless steel hardware includedKickstand bracket included (Note: 07-Up models require use of 00-06 kickstand assembly)Fits 00-15 FXST
Note: May require custom brake line for proper fit.Description P/N RetailContrast Cut RD5225 849.95Black-Ops RD5226 849.95
ROLAND SANDS DESIGN® REAR SETS FOR SPORTSTERSOur racetrack driven RSD Rear Sets for Sportsters are the ultimate improvement for an aggressive foot position. These Rear Sets have RSD’s high quality finish and feature footpegs with race style pivots allowing for a higher lean angle. The mega knurl on our pegs ensure your feet stay planted and your focus remains on the road ahead. High quality fasteners and pivots ensure smooth operation with little effort.
Bolt-on Rear Sets foot controls for 04-Up Sportster XL modelsCompletes the RSD “Café Sportster” package of productsMoves foot position approximately 2” up, 13” back and 1.5” narrower per side for increased ground clearance when corneringAggressive rider positionUtilizes O.E.M. rear master cylinderDesigned to fit seamlessly with RSD Slant 2-into-1 exhaust systemEliminates bulky, heavy O.E.M. cast steel footpeg brackets, bell crank brake rod and master cylinder bracketBlack Ops has both textured black and a gloss black finish on one part. It’s aggressive, yet subtleNot compatible with Factory Passenger Pegs
PM Contour Foot Controls are designed to work with PM Brake Systems as well as O.E. and other aftermarket brakesCNC machined from billet aluminumComes with PM’s proven master cylinder
PERFORMANCE MACHINE CONTOUR FORWARD CONTROLS
HARLEY-DAVIDSON Year Color P/N RetailFXST 00-15 Contrast Cut PM3049 999.95FXST 00-15 Chrome PM3050 999.95FXST 00-15 Contrast Cut 2” Ex PM3051 999.95FXST 00-15 Chrome 2” Ex PM3052 999.95FXST 84-99 Contrast Cut PM3047 999.95FXST 84-99 Chrome PM3048 999.95FXST 84-99 Contrast Cut 2” Ex PM3053 999.95FXST 84-99 Chrome 2” Ex PM3054 999.95
Designed to match seamlessly with the RSD Sportster Mid-Controls, this kit allows you to add footpegs for your passengerPassenger pegs and mounts to match Sportster Mid-Controls and Traction Grips and PegCompact bolt-on solution to replace bulky O.E.M. mountHardware includedRSD Contrast Cut product starts with a finely machined polished and black anodized part which is re-machined to bring out the design highlights. Close attention is paid to machine pattern and quality to ensure the best and cleanest machine workBlack Ops has both textured black and a gloss black finish on one part. It’s aggressive, yet subtleFits 04-up XL Sportster
HARLEY-DAVIDSON Year P/N RetailFXST/FLST w/ Tracker Pipe 86-Up RD3266 69.95
ROLAND SANDS DESIGN® PASSENGER PEG RE-LOC BRACKETS
Allows the use of passenger pegs when using the RSD Tracker pipe on Softails. Your lady will thank youGloss black powder-coatedRequired for installation of pegs with Tracker 2-into-1 pipeMade in the USA
ROLAND SANDS DESIGN® MID-CONTROLS SPORTSTEROur Mid-Controls are the ultimate improvement for our foot positioning. Features footpegs with race style pivots allowing for a higher lean angle and a mega knurl to ensure your feet stay planted and your focus remains on the road ahead. High quality fasteners and pivots ensure smooth operation with little effort.
Bolt-on Mid-Controls for 04-Up Sportster XL modelsMoves foot position approximately 1” up, 1” back and 1.5” narrower per side for increased ground clearance when corneringUtilizes O.E.M. rear master cylinder and shift leverDesigned to fit seamlessly with RSD Slant 2-into-1 exhaust systemEliminates bulky, heavy O.E.M. cast steel footpeg brackets, bell crank brake rod and master cylinder bracketPassenger Peg and Mount sold separately (Contrast Cut-RD3037, Black Ops-RD3038)RSD Contrast Cut product starts with a finely machined polished and black anodized part which is re-machined to bring out the design highlights. Close attention is paid to machine pattern and quality to ensure the best and cleanest machine workBlack Ops has both textured black and a gloss black finish on one part. It’s aggressive, yet subtle
Unique design and features make these controls a must for any stock or custom applicationManufactured with the utmost care for quality and fitCNC machined from billet aluminumFlat surface features a comfortable, flat surface fit with a non-skid rubber insert. Tight tolerance fit and Oilite bushings throughoutAvailable in polished, chrome and black finishMade in the USAFits 86-99 Softail models
J-FL forward controls are designed to mount to FLH touring modelsThese controls will meet the needs of everyone who likes the feel and mobility of forward controls, but demands the luxury of their baggerMachined from a combination of steel and billet aluminum, these controls utilize existing Harley-Davidson® mounts and pivot points as well as the stock master cylinderThe J-FL forward controls can be mounted to your touring bike with or without the use of the crash barThe stock kickstand will mount onto the controls with the mounting block providedAll steel components are powder-coated black and the billet parts are available in either chrome or black anodized
Fully adjustable pegs and brake/shift levers to allow for the perfect fitConstructed of steel and billet aluminumUtilize stock mounts and master cylinderUses 00-06 Softail style kickstandAll steel components are powder-coated blackAluminum components are available with chrome or black anodize finishFits 00-15 Softail models
Chrome-plated billet aluminumFeatures ergonomic hand-crafted black anti-vibration rubber sleevesFitted with a heavy-duty Kelsey-Hayes type master cylinder with 5/8” boreFits all 5-speed 86-99 Softail models and as a stock replacement on 4-speed 58-86 FL, FX models
Chrome billet aluminum5/8” boreRequires custom brake lines and fittingsShifter rod and shifter rod hardware are not includedFootpeg mounts use #491651Footpegs included
® FORWARD CONTROL KITSChrome-plated steelAll mounting hardware and linkages includedFeatures a chrome Kelsey Hayes style 3/4” master cylinderFits 58-86 4-Speed Big Twin; 86-99 Softail models
Note: Will not work with engine guards.489723 488.95
® DYNA FORWARD CONTROLS KIT
Chromed steelDoes not include footpegsUses any aftermarket and pre 2006 O.E.M. male mount footpegsDoes not accept 06-Up O.E.M. footpegFits 06-14 Dyna with mid-control
Note: May not work with engine guards.Description P/N RetailStock Length Dyna with Mid-Controls Replaces H-D#49080-0 482718 330.95Replacement Shift Rod 489979 28.95Replacement Brake Rod 489978 32.95
Chrome-plated steelDuplicate O.E.M.Includes mounts, brake rod, all levers and hardwareExtension kit sold separatelyMoves Dyna controls forward 2” for taller rides
Note: Will not work with engine guards.
® DYNA FORWARD CONTROL KITS
® FORWARD CONTROL KITS
Forward ControlsDescription P/N Retail91-05 Dyna Glide Models H-D#49080-93 489720 391.95Replacement Shift Rod 489973 26.95Replacement Brake Rod 489974 28.95
2 In. Extension Kit - OnlyKit will locate the footpegs and controls approximately 2” (5cm) more forward than the stock positionIncludes two relocation plates with hardware and an extended brake and shifter rodShow-chromed finish
Description P/N Retail91-05 Dyna Glide Models (exc. 03-05 FXDWG) & BC #489720 489721 87.95Replacement Shift Rod 489983 26.95Replacement Brake Rod 489981 28.95
® DYNADD
489720489720
489721
® FORWARD CONTROLS KIT FOR SPORTSTER MODELS
Chrome-platedFootpegs not includedSold as a complete setHardware includedFits 86-03 Sportster modelsMay not work with some types of engine guards
Note: Not for use with two into one exhaust systems.Description P/N RetailForward Controls Kit H-D#33891-88 489840 369.95Replacement Brake Rod 490022 24.95Replacement Shift Rod 490023 28.95
Chrome-platedBrake and shifter assemblies feature O-ring style pegsSold in complete sets
Note: May not work with some types of engine guards. Not for use with two into one exhaust systems.
FOOTCONTR
INSTRU& LIGH
ELECTR
BATTER& CHA
TRAILE& RAM
CHEMI& LUBE
TOOLS
Shift Rod 490023 28.95
®
M FORWARD CONTROLS
NEW PART NUMBERS ARE RED
FOOT CONTROL
1312
AUDIO& VIDEO
INDIAN& VICTORY
WINDSHIELDS
SEATS &SISSY BARS
LUGGAGE
SECURITY& COVERS
TIRES &WHEELS
BRAKES
CHASSIS
SUSPENSION
SHEET METAL
EXHAUST
FUEL & AIRSYSTEMS
ENGINE &OIL FILTERS
PRIMARYDRIVE
TRANSMISSION& FINAL DRIVE
GASKETS &HARDWARE
HANDLEBARS& CONTROL
CABLES
FOOTCONTROL
INSTRUMENT& LIGHTING
ELECTRICAL
BATTERIES& CHARGERS
TRAILERS& RAMPS
CHEMICAL& LUBES
TOOLS &SUPPLIES
GENERALACCESSORIES
& DISPLAY
CROSSREFERENCE
INDEX
Chrome-plated or blackIncludes foot and shifter pegsAll mounting hardware includedFits 04-14 Sportster modelsNote: Not for use with two into one exhaust systems.
BlackDescription P/N RetailForward Controls H-D#33395-04 489852 513.95Replacement Brake Rod 489976 55.95Replacement Shift Rod 489977 32.95
OO
NY
S
&S
E 493234
489852
KURYAKYN® FORWARD CONTROLSFlush, countersunk fasteners are used exclusively on mounting plates for a clean, uncluttered appearanceAll ball joints, linkages and visible hardware are also treated to a beautiful chrome finishIgus® shifter bearings provide smooth, maintenance-free operationIncludes ISO®-Shift Pegs and ISO®-Brake Pedal Pad but without footpegs so you can customizeFits 90-15 Dyna (exc. 12-15 FLD)
Note: Forward Controls are not compatible with most engine guards and will not fit 08-10 Dyna Fat Bob; 09-10 FXDFSE; 2010 FXDWG if equipped with stock exhaust.Description P/N RetailStandard (Mfg/N 9063) 494495 399.99Extended (Mfg/N 9064) 494497 399.99
Chrome-plated adaptor platesStainless steel extended shifter rods and mounting bolts2” or 3” extension kits available
® ADJUSTABLE FORWARD CONTROL HEEL REST KIT
ChromeUse with custom male pegs on toe pegsReplaces O.E. 50227-01Fits 89-up FXST; 93-02 FXDWG models
488719 69.95
Chrome CNC aluminumUse spacers to move forward controls out from the frame as needed, when using custom frames with various offsets of the primary and engineHardware not includedFits 84-99 Softail models and custom frames with early (84-99) Softail style control mounts
JAYBRAKE 2 IN. EXTENSION KITPolished mirror finishMoves forward controls forward 2”Includes hardware and shifter rodFits 84-99 Softail models
491997 189.00
® SPORTSTER FOOTPEG CONVERSION KIT
Easy to installMoves the footpegs and foot controls up and back around 2” closer to the riderMoves the footpegs outward 1/2” (shift side) and 1/2” (brake side)Includes steel mounts and brake rodReuses O.E. control supports and O.E. or custom brake/shift leversAvailable in chrome or blackFits 04-14 Sportster models
CNC machined from billet aluminumDesign matched to the Café or Nostalgia line of productsMatching Front Master Cylinder Caps availableAvailable in Black Ops, Contrast Cut, Chrome and Machine Ops
ChromeFiller caps for Wagner® master cylindersFits 58-E79 Big Twin modelsH-D# 41765-58
490699 13.95
ARLEN NESS RAD II MASTER CYLINDER RESERVOIR
Direct replacement for the factory unitDie-cast aluminumChrome-platedFits 99–07 FLT, softail models
263121 49.95
ERVOIRR R
KURYAKYN® REAR MASTER CYLINDER COVER FOR SOFTAIL & ROAD KING MODELS
One piece, die-cast chrome coverFits over the stock lid so there is no chance of leaksMfg/N 9128Fits 00–15 All Softail; 99–07 Road King, Dresser; 09–13 Trikes
PM’s Contour Master cylinder matches to PM Contour Hand ControlsProven performance to work with stock or PM brake calipersDirect replacement for O.E.M. unit
Design matched to PM Merc GripsRubber wrapped for comfortMounts to stock HD Clevis
Note: PM Footpegs will NOT fit rider pegs on all XL 1200X models, 11-13 XL 1200C, and 12-13 XL 1200V, 11-15 XL 883LDescription P/N RetailContrast Cut PM3041 119.95Chrome PM3042 119.95
CNC machined billet aluminumMatching grips available, sold separatelyAvailable in Black Cut or chromeMale mount designed footpegs to fit most H-D applicationsSold in pairs
XTREME MACHINE FOOTPEGS & SHIFTER PEGS
Footpegs ChromeDescription P/N RetailV-Cut with Rubber 678151 129.95V-Cut without Rubber 678153 129.95Dominate with Rubber 678147 129.95Dominate without Rubber 678149 129.95
Footpegs Black CutDescription P/N RetailV-Cut with Rubber 678150 129.95V-Cut without Rubber 678152 129.95Dominate with Rubber 678146 129.95Dominate without Rubber 678148 129.95
Shifter Pegs Black CutDescription P/N RetailV-Cut 678156 35.95Dominate 678154 35.95
V-Cut with Rubber
678151
V-Cut without Rubber
678153
Dominate with Rubber
678147
Dominate without Rubber
678149
R bb
678150
ithout Rubber
678152
678146
h bb
678148
V-Cut
Dominate
V-Cut
Aggressive XM styling to match the Xcelerator GripsMounts to stock H-D clevis With comfort rubber CNC machined The Xcelerator’s sensual curves and hard-core cuts make these billet beauties irresistible to the eyes and touchGet a hold of these and Xccelerate your style to Xciting places
ROLAND SANDS DESIGN® BILLET TRACKER TOE PEGDesign matched to our Tracker Grips and Footpegs, the Tracker Toe Pegs are a comfortable and stylish option for your foot controls. The added benefit of replaceable rubber make the Tracker a part you will not wear out.
CNC machined from billet aluminumKnurled rubberMatching Grips and Footpegs available
ROLAND SANDS DESIGN® BRASS TRACKER TOE PEGDesign matched to our Tracker Grips and Footpegs, the Tracker Toe Pegs are a comfortable and stylish option for your foot controls. The added benefit of replaceable rubber make the Tracker a part you will not wear out.
CNC machined from brassKnurled rubberMatching Grips and Footpegs available
RD3004 49.95Design matched to our Tracker Grips the Tracker Footpegs are a comfortable and stylish option for your foot controls. The added benefit of replaceable rubber make the Tracker a part you will not wear out.
CNC machined from billet aluminumKnurled rubberRSD laser engraved logoSold as a pairMatching Grips and Toe Pegs availableRSD Contrast Cut product starts with a finely machined polished and black anodized part which is re-machined to bring out the design highlightsBlack Ops is gloss black on top of a contrasting textured black. Go covert with RSD Black Ops
ROLAND SANDS DESIGN® BRASS TRACKER FOOTPEGSDesign matched to our Tracker Grips the Tracker Footpegs are a comfortable and stylish option for your foot controls. The added benefit of replaceable rubber make the Tracker a part you will not wear out.
CNC machined from brassKnurled rubberRSD laser engraved logoSold as a pairMatching Grips and Toe Pegs available
Description P/N RetailDyna-Sporty 45 Degree Male Mount RD3013 164.95H-D Straight Male Mount RD3014 164.95
ROLAND SANDS DESIGN® BILLET CHRONO TOE PEGTime is on your side with the RSD Chrono line. Inspired by high quality time pieces, the Chrono peg offers a high level of detailing and design.
CNC machined from billet aluminumKnurled rubberMatching Grips and Footpegs availableRSD Contrast Cut product starts with a finely machined polished and black anodized part which is re-machined to bring out the design highlights. Close attention is paid to machine pattern and quality to ensure the best and cleanest machine workBlack Ops is gloss black on top of a contrasting textured black. Go covert with RSD Black Ops
ROLAND SANDS DESIGN® BRASS CHRONO TOE PEGTime is on your side with the RSD Chrono line. Inspired by high quality time pieces, the Chrono peg offers a high level of detailing and design.
CNC machined from brassKnurled rubberMatching Grips and Footpegs available
Description P/N RetailUniversal RD3019 49.95
ROLAND SANDS DESIGN® BILLET CHRONO FOOTPEGSTime is on your side with the RSD Chrono line. Inspired by high quality time pieces, the Chrono pegs offer a high level of detailing and design.
CNC machined from billet aluminumCustom knurled RSD logo rubberInterchangeable RSD logo badges (Black and Brass)Sold as a pairRSD Contrast Cut product starts with a finely machined polished and black anodized part which is re-machined to bring out the design highlights. Close attention is paid to machine pattern and quality to ensure the best and cleanest machine workBlack Ops is gloss black on top of a contrasting textured black. Go covert with RSD Black Ops
ROLAND SANDS DESIGN® BRASS CHRONO FOOTPEGSTime is on your side with the RSD Chrono line. Inspired by high quality time pieces, the Chrono pegs offer a high level of detailing and design.
CNC machined from brassCustom knurled RSD logo rubberInterchangeable RSD logo badges (Black and Brass)Sold as a pairMatching Grips and Toe Pegs available
RD3024 164.95
RD3015 RD3016RD3015
RD3017
RD3016
RD3018
RD3018
SANDDSS DESIGN
RD3020RD3021
RD3020RD3020
RD3022
RD3023
ROLAND SANDS DESIGN® BILLET TRACTION TOE PEGA little goes a long way with the new RSD Traction Toe Pegs and matching Grips. Grips feature knurled rubber for more comfort and an ergonomically friendly shape to keep you in control.
Description P/N RetailGloss Black RD3025 34.95Chrome RD3026 34.95
RD3025 RD3026
NEW PART NUMBERS ARE RED
FOOT CONTROL
1324
AUDIO& VIDEO
INDIAN& VICTORY
WINDSHIELDS
SEATS &SISSY BARS
LUGGAGE
SECURITY& COVERS
TIRES &WHEELS
BRAKES
CHASSIS
SUSPENSION
SHEET METAL
EXHAUST
FUEL & AIRSYSTEMS
ENGINE &OIL FILTERS
PRIMARYDRIVE
TRANSMISSION& FINAL DRIVE
GASKETS &HARDWARE
HANDLEBARS& CONTROL
CABLES
FOOTCONTROL
INSTRUMENT& LIGHTING
ELECTRICAL
BATTERIES& CHARGERS
TRAILERS& RAMPS
CHEMICAL& LUBES
TOOLS &SUPPLIES
GENERALACCESSORIES
& DISPLAY
CROSSREFERENCE
INDEX
ROLAND SANDS DESIGN® BRASS TRACTION TOE PEGA little goes a long way with the new RSD Traction Toe Pegs and matching Grips. Grips feature knurled rubber for more comfort and an ergonomically friendly shape to keep you in control.
Inspired by our passion for motocross styling, we decided to bring a little dirt to the road. Intentionally designed with a featherweight, ventilated body and aggressive tooth pattern for performance and grip.
Direct stock replacement for HD male mount pegsFits driver and passenger mountsChrome mounting hardware kit sold separatelySold as a pair
ROLAND SANDS DESIGN® MOTO FOOTPEGS
Straight Male MountDescription P/N RetailBlack Anodized RD3031 124.95Chrome RD3032 124.95
ROLAND SANDS DESIGN® BILLET TRACTION FOOTPEGSA little goes a long way with the new RSD Traction Footpegs and matching Grips. Grips feature knurled rubber for more comfort and an ergonomically friendly shape to keep you in control.
CNC machine billet aluminumRoad Race styled knurlingFootpegs have been shortened for more ground clearanceSold as a pair
Description P/N RetailGloss Black RD3028 109.95Chrome RD3029 109.95
RD3028
RD3029
45° Male MountDescription P/N RetailBlack Anodized RD3270 124.95Chrome RD3271 124.95
RD3031
RD3032
RD3270
RD3271
ROLAND SANDS DESIGN® BRASS TRACTION FOOTPEGSA little goes a long way with the new RSD Traction Footpegs and matching Grips. Grips feature knurled rubber for more comfort and an ergonomically friendly shape to keep you in control.
CNC machine billet aluminumRoad Race styled knurlingFootpegs have veen shortened for more ground clearanceSold as a pair
RD3030 164.95
FOOT CONTROL
1325NEW PART NUMBERS ARE RED
AUDIO& VIDEO
INDIAN& VICTORY
WINDSHIELDS
SEATS &SISSY BARS
LUGGAGE
SECURITY& COVERS
TIRES &WHEELS
BRAKES
CHASSIS
SUSPENSION
SHEET METAL
EXHAUST
FUEL & AIRSYSTEMS
ENGINE &OIL FILTERS
PRIMARYDRIVE
TRANSMISSION& FINAL DRIVE
GASKETS &HARDWARE
HANDLEBARS& CONTROL
CABLES
FOOTCONTROL
INSTRUMENT& LIGHTING
ELECTRICAL
BATTERIES& CHARGERS
TRAILERS& RAMPS
CHEMICAL& LUBES
TOOLS &SUPPLIES
GENERALACCESSORIES& DISPLAY
CROSSREFERENCE
INDEX
BURLY BRAND MX STYLE PEGSInspired by the bear trap style of the 70’s motocross machinesAdjustable angle for comfort and serrated edge will keep your feet plantedTIG welded for strength and powder-coated blackAn added feature—a bottle opener on the underside
070675 125.99
070675
070675
070675
Soft-Touch Series foot and shifter pegs provide great styling with excellent foot tractionMachined from 6061-T6 billet aluminum, these pegs are made from the finest materials availableAvailable with dimpled or knurled style rubberAvailable in chrome or black anodized finishesMatching grips sold separately
Designed to match the Fusion line of gripsThe perfect fusion of traction, style and comfortFootpegs are machined from billet aluminum and wrapped in diamond knurled or linear style rubber for excellent foot tractionShifter pegs are constructed from machined billet aluminum and high traction rubber. Knurled style is constructed from molded rubber with integrated mounting stud and billet aluminum accentsEach foot and shift peg features intricate machining for a great lookKnurled style footpegs are made from forged steel and diamond knurled rubber with integrated billet aluminum end cap. Knurled and slot track shift peg is constructed from molded rubber and features an integrated mounting stud and billet aluminum end capSeveral styles to choose from in chrome or black anodize finish
Footpegs are 1” longer than factory pegs for increased comfortInnovative styles complete the look of your bikeMatching grips available separatelyAll pegs are machined from 6061-T6 billet aluminum and chrome-platedSome styles also available in black anodize finish
Durable rubber grip insertsChrome-platedSold in pairs
KURYAKYN® ISO® PEGS
Large DiameterDescription P/N RetailFemale Style Mount (Mfg/N 8003) 497123 49.99Male Style Mount (Mfg/N 8002) 497122 49.99Peg without Adapter (Mfg/N 7965) 494465 39.99
Small DiameterDescription P/N RetailMale Style Mount (Mfg/N 8000) 497120 49.99Female with 5/8” Square Mount (Mfg/N 8001) 497121 49.99Peg without Adapter (Mfg/N 7964) 494463 39.99
DuallyDescription P/N RetailDually - ISO 497286 79.99Peg without Adapter (Mfg/N 7963) 497308 69.99Replacement Rubber Insert 491343 17.99
LonghornDescription P/N RetailMale Style Mount (Mfg/N 8024) 497285 54.99
497124ARLEN NESS KNURLED BRASS FUSION MALE MOUNT FOOTPEGSFusion footpegs are reinforced with forged steel for extreme durability, knurled and linear rubber inserts for excellent traction, and billet aluminum accents for a great look.
Machined from 6061 - T6 billet aluminumThe perfect fusion of traction, style and comfortInnovative knurled style with brass finish complete the look of your bikeMatching knurled grips, floorboard inserts, and brass shifter pegs are available
263504 59.95
NEW PART NUMBERS ARE RED
FOOT CONTROL
1328
AUDIO& VIDEO
INDIAN& VICTORY
WINDSHIELDS
SEATS &SISSY BARS
LUGGAGE
SECURITY& COVERS
TIRES &WHEELS
BRAKES
CHASSIS
SUSPENSION
SHEET METAL
EXHAUST
FUEL & AIRSYSTEMS
ENGINE &OIL FILTERS
PRIMARYDRIVE
TRANSMISSION& FINAL DRIVE
GASKETS &HARDWARE
HANDLEBARS& CONTROL
CABLES
FOOTCONTROL
INSTRUMENT& LIGHTING
ELECTRICAL
BATTERIES& CHARGERS
TRAILERS& RAMPS
CHEMICAL& LUBES
TOOLS &SUPPLIES
GENERALACCESSORIES
& DISPLAY
CROSSREFERENCE
INDEX
KURYAKYN® SWINGWING FOOTPEGSA convenient fold-forward, comfortable cruise peg that fastens in place of your stock peg and provides a secondary fold-out peg 3” forwardReplaces any H-D style male-mount peg
KURYAKYN® SWITCHBLADE FOOTPEGSAlthough this setup will work in any peg location, these are the ideal footpegs for bikes using forward controls or as forward mounted cruise pegsSold in pairs
All the features and comfort of the original ISO®-Peg with a whole new lookCoordinates well with stock or custom footrestsSold in pairsReplacement for H-D male mount peg applications and Kuryakyn® cruise peg mounts and clevises
KURYAKYN® TRIDENT ISO®-PEGS
491095
491094491094
4910
419091
495590
495591
495592
KURYAKYN® RETRO™ FOOTPEGSVibration-absorbing material for comfort and superb tread gripTrim profile body shapeChrome-platedSold in pairs
ISO® SWEPTWING PEGSSimple and stylishAdd the sleek lines of the ISO® SweptWing Pegs to streamline your bike. With traditional ISO® design, these beauties reduce the vibration—giving you a super comfortable footpeg. Add them solo or coordinate them as a matched set to Kuryakyn’s SwingWing Peg
Description P/N RetailMale Mount (Mfg/N 4463) 496962 79.99Replacement Rubber Pad (Mfg/N 4469) 494409 69.99Replacement Rubber Pad (Mfg/N 4469) 499415 17.99
EPTWING PEGS
KURYAKYN® WIDOW® FOOTPEGS
Spider themed designDescription P/N RetailFootpegs - Male Mount (Mfg/N 4491) 494427 109.99Shifter Peg (Mfg/N 4494) 494841 26.99Widow® Pegs (Mfg/N 4492) 497095 99.99Replacement Rubber Insert 491339 13.99Brake Pedal Pad - All Electra Glide, Road Glide, Street Glide, Tour Glide, RoadKing, All FLST Models (Mfg/N 7533) 494429 39.99
494427
497095
494429
KURYAKYN® STILETTO FOOTPEGSFootpegsDescription P/N RetailStiletto Pegs (Mfg/N 4476) 491086 99.99Shifter Peg (Mfg/N 4479) 494419 29.99Footpegs - Male Mount (Mfg/N 4475) 494415 109.99Footpegs with Stirrups (Mfg/N 4477) 494417 179.99Brake Pedal Pad (Mfg/N 4480) 494421 32.99
Features ergonomic seamless rubber and billet end capsAvailable in 15 styles and two colorsFootpegs are sold in pairsShifter/brake pegs are sold individuallyMade in The USA
AVON GRIPS GEL SHIFTER PEG [BC]Matching shifter/brake peg for your set of Gel GripsThe new style peg is complimented by stylish, billet aluminum, triple chrome plated or black anodized
AVON GRIPS FOLDING GEL FOOTPEGMatching footpeg for your set of Gel GripsThe new style peg is complimented by stylish, triple chrome plated or black anodized
PRO-ONE™ SHIFT PEGThis trick little Shift Peg is machined from solid billet aluminumLength is 3-1/2”Includes mounting hardware to fit stock Harley-Davidson arms or most forward controls
621561 39.95
® TORNADO FOOTPEGSChromeFeatures non-slip, anti-vibration rubberSold in pairs
Chrome-platedBillet aluminumFor use with billet forward controlsSold individually
489842
® SHIFTER PEG
Replacement Rubber489954 12.50
High-tech, chrome-plated footpegs enhance comfort and appearance on any vehicleReplaceable hollow rubber inserts provide vibration dampening and almost completely eliminate footpeg “tingle”
® ANTI-VIBRATION FOOTPEGS
Large DiameterDescription P/N RetailFemale Style Mount 493325 45.95Male Style Mount 493327 46.50Replacement Rubber 495085 9.95
Small DiameterDescription P/N RetailMale Style Mount 493326 37.95Aftermarket Style with 5/8” Block 493324 36.95Replacement Rubber 495086 9.50
® CUSTOM FOLD-UP PEGSCustom fold-up pegs have O.E.M. style rubber covers and chrome-plated end capsMay be used to match cap style rider and shifter pegs for forward controls, highway bars or as custom mount passenger pegsClevis mount 1/2”–20Sold in pairsFits L72-74 XL; L72-81 FX; 82-94 FXR; 84-00 Softail
HARLEY-DAVIDSON Year O.E.M. P/N RetailSportster, Big Twin 63-07 H-D#33189-63T 492575 3.50
Brake Pedal Rubbers
ON PAGE 1370
NEW PART NUMBERS ARE RED
FOOT CONTROL
1336
AUDIO& VIDEO
INDIAN& VICTORY
WINDSHIELDS
SEATS &SISSY BARS
LUGGAGE
SECURITY& COVERS
TIRES &WHEELS
BRAKES
CHASSIS
SUSPENSION
SHEET METAL
EXHAUST
FUEL & AIRSYSTEMS
ENGINE &OIL FILTERS
PRIMARYDRIVE
TRANSMISSION& FINAL DRIVE
GASKETS &HARDWARE
HANDLEBARS& CONTROL
CABLES
FOOTCONTROL
INSTRUMENT& LIGHTING
ELECTRICAL
BATTERIES& CHARGERS
TRAILERS& RAMPS
CHEMICAL& LUBES
TOOLS &SUPPLIES
GENERALACCESSORIES
& DISPLAY
CROSSREFERENCE
INDEX
Available in three swivel mount configurationsThese fold-up pegs match our rider and shifter O-ring pegsMay be mounted from the lower shock stud position or used in custom applications, such as forward controls, highway bars, or fabricated passenger mounts
Clamp-OnDescription P/N RetailMount to 1” to 1-1/8” Frame or Engine Guard 492614 30.50
® O
490356 492867
O-ring pegsosition or used
ols, highway bars,
G
7
492614
® ADJUSTABLE HIGHWAY PEG SUPPORT KIT
Forged aluminum levers and mounting bracketsChrome leversThree positions available by easy adjustmentIncludes necessary hardwareDoes not include footpegs. Requires male mount small style pegFits 04-14 Sportster models
482769 202.95
®
WAY PEG SUPPORT KITChrome-plated1/2” diameter mounting holeSold in pairs
489646 87.95
® FOLDING REAR FOOTPEGS
Replacement Rubber489955 14.50
® O-RING HIGHWAY PEGSHeavy-duty motor mount highway pegs are chrome-platedFits L84-03 Sportster models (exc. 99 & later customs)
Note: May not work with forward controls.490414 84.95
VICTORY Year P/N RetailCross Country (exc. Tour) 10-15 418856 219.99Cross Roads 10-15 418856 219.99Hard-Ball 10-15 418856 219.99
KURYAKYN® RETRACTABLE PASSENGER CRUISE PEGS
These innovative cruise pegs rotate forward to provide an alternate passenger foot position for those long cruises and rotate out of the way when not neededDesigned to mount to the O.E.M. passenger footpeg mount, they can be used with either existing stock passenger pegs or coordinate with any Kuryakyn pegs or floorboardsIncludes Small Trident ISO-PegsFits all 10-14 Cross Country (except Cross Country Tour), Cross Roads and Hard-Ball models with O.E.M. passenger foot peg mounts
IDEO
DIANTORY
IELDSSS
ATS &BARS
GAGE
URITY
HARLEY-DAVIDSON Year P/N RetailSportster 04-15 494376 169.99Sportster L84-03 494377 169.99
KURYAKYN® ADJUSTABLE CRUISE PEG BARBolts securely to the welded cross brace near the bottom of the downtubes and works on models with or without forward controlsSold individuallyAccepts any H-D style male mount footpegs
RYAKYNRR ® ADJUSTABLE CRUISE PEG BAR
3-Piece Clamps
ON PAGE 1343
FOOT CONTROL
1337NEW PART NUMBERS ARE RED
AUDIO& VIDEO
INDIAN& VICTORY
WINDSHIELDS
SEATS &SISSY BARS
LUGGAGE
SECURITY& COVERS
TIRES &WHEELS
BRAKES
CHASSIS
SUSPENSION
SHEET METAL
EXHAUST
FUEL & AIRSYSTEMS
ENGINE &OIL FILTERS
PRIMARYDRIVE
TRANSMISSION& FINAL DRIVE
GASKETS &HARDWARE
HANDLEBARS& CONTROL
CABLES
FOOTCONTROL
INSTRUMENT& LIGHTING
ELECTRICAL
BATTERIES& CHARGERS
TRAILERS& RAMPS
CHEMICAL& LUBES
TOOLS &SUPPLIES
GENERALACCESSORIES& DISPLAY
CROSSREFERENCE
INDEX
KURYAKYN® ISO® PEG EXTENSIONSNeed more room? Our ISO-Peg Extensions are made of machined steel and chrome-platedFor small ISO-Pegs onlyFor other Kuryakyn pegs, use male mount peg extensions P/N 8063 or 8064
Description P/N Retail1 in. (pr.) 419542 29.991-1/2 in. (pr.) 419543 39.99
KURYAKYN® ISO® PEG EXTENDERSNeed more room? Our ISO-Peg Extensions are made of machined steel and chrome-plated
Description P/N Retail1-1/2 in. (pr.) 419545 39.992-1/2 in. (pr.) 419546 39.99
KURYAKYN® OFFSET HIGHWAY PEGSThe clamp can be positioned forward or back and offers 360° rotationSold in pairsIncludes Magnum Quick clamps
Description P/N RetailPilot Pegs with Offset and 1” Magnum Quick Clamps 499412 149.99Pilot Pegs with Offset and 1-1/4” Magnum Quick Clamps 499411 149.99Dually ISO®-Pegs with Offset Mount and 1-1/4” Magnum Quick Clamps (pr) Universal 497310 149.99Small ISO®-Pegs with Offset and 1-1/4” Magnum Quick Clamps 494807 129.99Large ISO®-Pegs with Offset and 1-1/4” Magnum Quick Clamps 497505 139.99
497381
& V
IN& V
W
SE497940
SI
LU
SE&
TIW
BR
SE
497940494396
499411497310
KURYAKYNRR ® OFFSET HIGHW
4948077497505
KURYAKYNRR ® ISO® PEG EXTENSIONSNeed more room? Our ISO-Peg Extensions are made of machined steel and chFor small ISO-Pegs only
KURYAKYN® LONGHORN OFFSET HIGHWAY PEGS
The all-in-one answer for long-haul comfortSold in pairs
Description P/N RetailDually and 1-1/2” Magnum Quick Clamp 419061 169.99Offset Dually and 1-1/4” Magnum Quick Clamp 497016 169.99Dually and 1” Magnum Quick Clamp 494467 169.99Longhorn Offset SweptWing with 1-1/4” Magnum Quick Clamp 419062 169.99Trident Dually and 1-1/4” Magnum Quick Clamp 491091 169.99
KURYAKYN® FOOTPEGS WITH MOUNTS AND MAGNUM QUICK CLAMPS
ISO® pegs with mounts and Magnum Quick clampsSold in pairs
NEW PART NUMBERS ARE RED
FOOT CONTROL
1338
AUDIO& VIDEO
INDIAN& VICTORY
WINDSHIELDS
SEATS &SISSY BARS
LUGGAGE
SECURITY& COVERS
TIRES &WHEELS
BRAKES
CHASSIS
SUSPENSION
SHEET METAL
EXHAUST
FUEL & AIRSYSTEMS
ENGINE &OIL FILTERS
PRIMARYDRIVE
TRANSMISSION& FINAL DRIVE
GASKETS &HARDWARE
HANDLEBARS& CONTROL
CABLES
FOOTCONTROL
INSTRUMENT& LIGHTING
ELECTRICAL
BATTERIES& CHARGERS
TRAILERS& RAMPS
CHEMICAL& LUBES
TOOLS &SUPPLIES
GENERALACCESSORIES
& DISPLAY
CROSSREFERENCE
INDEX
X-Tension Peg MountsDescription P/N Retail1-1/4” clamps or with Kuryakyn Magnum Quick Clamps 418802 83.99
Allows one to fine tune their riding positionMeasuring 4-1/2” long with a 1-1/4” offset, the rider may now increase or decrease the reach to the highway pegSold in pairs
Note: Not suggested for use with full size engine guards
KURYAKYN® X-TENSION CRUISE PEG MOUNTS
X-Tension Peg Mounts With Dually ISO-Pegs
418802
ION CRUISE PEG MOUNTS
02
KURYAKYN® ISO®-STIRRUPS WITH DUALLY PEGS
Male mountSold in pairsMfg/N 8062
494471 139.99
KURYAKYN® ISO® STIRRUPS WITH CLEVIS & CLAMP
Includes 1-1/4” Magnum Quick ClampSold in pairsPermits the use of the ISO® Stirrups on 1-1/4” engine guards
Sold as a pairFootpegs without adapters sold separatelyMfg/N 8882Fits 04-10 Big Dog Motorcycles
495371 31.99
y
Chrome-platedExtends rider comfort over long haulsAlternative for bikes without floor boardsAllows rider to rest foot with heel supportAdjustable positioning
KURYAKYN® ISO® STIRRUPS
Large PegDescription P/N RetailMale Style Mount 497112 129.99
Small PegDescription P/N RetailMale Style Mount 497113 129.99
Without PegDescription P/N RetailH-D with ISO™ Pegs (Mfg/N 8074) 497111 99.99
497112497113
UPS
497111
KURYAKYN® LONGHORN OFFSET PEG MOUNTSExtended version of Kuryakyn’s® Footpeg offset #4979413-1/4” radius gives an incredible 6-1/2” range of adjustmentGently curved shape keeps the peg tucked in toward the center line of the bike for maximum comfortIncorporating an innovative locking deviceSold in pairs
Description P/N RetailLonghorn Offset Peg Mounts (For use with Magnum Quick Clamps only) 491101 79.99Longhorn Offset Peg Mounts with 1” Magnum Quick Clamp 499428 119.99Longhorn Offset Peg Mounts with 1-1/4” Magnum Quick Clamp 494469 119.99Longhorn Offset Peg Mounts with 1-1/2” Magnum Quick Clamp 491087 119.99
Description P/N RetailRebuild Kit 493923 24.99ISO®-Stirrups Mount, Male (Mfg/N 8079) 494475 24.99ISO®-Stirrups Arm (Mfg/N 8078) 494473 26.99
This kit gives you the ability to move your feet up or down and best of all when the driver has his or her feet on the highway pegs you can stretch your legs by laying your calves on the footrestsA bolt action locking device on the swingarm adds two intermediate positionsA revised mounting system allows easier installation and improved fit on newer modelsDoes not interfere with footboard operationSold in pairs
Note: Check clearance when using aftermarket exhaust systems.
KURYAKYN® ADJUSTABLE PASSENGER PEGS
HARLEY-DAVIDSON Year P/N Retailwith Stock (Black) Mounts 07-09 494447 199.99
Chopper style riding positionGreat for giving small passengers rides alsoSold in pairs
493923 494475
494473
497858
497858
419391
DERSEAT Y
419307
KURYAKYN® ADJUSTABLE LOCKABLE OFFSETA must-have for passengers. Complete circular rotation for 360° of comfortCan be used to reposition any male mount footpegBoth male end and clevis can be rotated 360° and lock securely when fully tightenedSold in pairs
Note: 495642 and 495643 require splined adaptors and male mount pegs.
Description P/N Retail2” Adjustable Lockable Offset (pr) 495644 99.992” Adjustable Lockable Offset without Male Mount (pr) 4956421 79.994” Adjustable Lockable Offset (pr) 495645 99.994” Adjustable Lockable Offset without Male Mount (pr) 4956431 79.99
495644
495644 495642495645 495643
1 495642 and 495643 require splined adaptors and male mount pegs.
NEW PART NUMBERS ARE RED
FOOT CONTROL
1340
AUDIO& VIDEO
INDIAN& VICTORY
WINDSHIELDS
SEATS &SISSY BARS
LUGGAGE
SECURITY& COVERS
TIRES &WHEELS
BRAKES
CHASSIS
SUSPENSION
SHEET METAL
EXHAUST
FUEL & AIRSYSTEMS
ENGINE &OIL FILTERS
PRIMARYDRIVE
TRANSMISSION& FINAL DRIVE
GASKETS &HARDWARE
HANDLEBARS& CONTROL
CABLES
FOOTCONTROL
INSTRUMENT& LIGHTING
ELECTRICAL
BATTERIES& CHARGERS
TRAILERS& RAMPS
CHEMICAL& LUBES
TOOLS &SUPPLIES
GENERALACCESSORIES
& DISPLAY
CROSSREFERENCE
INDEX
KURYAKYN® ADJUSTABLE PASSENGER PEG MOUNTS FOR H-D TOURING MODELS
Direct replacements for the stock passenger floorboards, accept any H-D style male mount pegAdjusts to any of the three stock positions-rotates 360° around and has a 1-5/8” diameterSold in pairsMfg/N 7527Fits 93-15 Electra Glide, Road Glide, Street Glide, Tour Glide, Road King, Trikes
494455 99.99
KURYAKYN® MALE MOUNT LOCKABLE OFFSETMove your cruise or highway pegs 2” or 4” forward, back, up, down or any direction around your current mounts without fear of slippageThese offsets mount anywhere Kuryakyn® male mount pegs install and accept any Kuryakyn® pegsSold in pairs
KURYAKYN® ISO® PEG REPLACEMENT PARTSEndsDescription P/N RetailLarge Female (Mfg/N 8006) pr. 497126 10.99Small Female (Mfg/N 8007) pr. 497127 10.99Male (Mfg/N 8008) pr. 497128 19.99Serrated Male Mount (Mfg/N 8880) pr. 494483 26.99Splined Male Mount (Mfg/N 8881) pr. 496934 26.99
KURYAKYN® PEG MOUNTED CRUISE MOUNTS WITH MALE ADAPTERS
Fastens between the forward control and the footpeg, it accepts any Kuryakyn® footpeg in the primary location and any male mount footpeg in the cruise locationSold in pairsMfg/N 7887
Note: Primary foot position only accepts the following Kuryakyn® pegs: Stilleto, Switchblade, Dually, Large ISO®, Small ISO®, Retro, Pilot and ISO®-Wing.494457 159.99
497127 497128
&E
SL
S
T 497129 497129 497131
AKYN® PEG MOUNTED CRUISE MOU
KURYAKYN® FORWARD CONTROL PEG MOUNT EXTENDER
Extend pegs outward 1-3/4”Easily mounts to the forward control’s existing clevisFits 00-15 FXST; 08-11 Rocker/C; 03-15 FXDWG; 08-15 FXDF with forward controls; 04-10 XL1200C/883C
Allows the use of any Kuryakyn® male mount pegs for engine guard applicationsFeatures Magnum™ Quick Clamp with clevisSold in pairs
Description P/N Retail1-1/4” Magnum Quick Clamp with Clevis 491100 79.991-1/2” Magnum Quick Clamp with Clevis 496839 79.99 KURYAKYN® PEG MOUNTS
Description P/N RetailFootpeg Offsets 497941 59.99Footpeg Mounts And Mounting Clevises 497942 32.99Short Magnum Peg Mount, 1/2” - 13 mounting bolt (Mfg/N 7573) pr. - Black 419359 32.99Replacement Mount for Kuryakyn offset, Longhorn Offset, Underseat mounts for Softail models (Mfg/N 4568) ea. 494443 21.99
KURYAKYN® CRUISE PEGS DOWN TUBE MOUNT
The answer for installing highway pegs on the frame down tubes of your VictoryThe right angle design allows the peg to be positioned for easy reach and long lasting comfortKeep the look of your sport cruiser clean and uncluttered, while adding additional over the road luxuryEverything you need all in one kit
419538 159.99
KURYAKYN® CHROME FOOTPEG MOUNTING HARDWARE
Grade 5 Steel footpeg hardware in glistening chrome419541 8.99
KURYAKYN® ADJUSTABLE PEG END MALE MOUNT
We have modified our standard H-D Type Male Footpeg Adaptors with an adjustable stop which now makes it possible to install conventional clamp-on highway pegs on an engine guard that would normally cause the pegs to angle down toward the groundWe have added a small set screw to the “heel” of the adaptorBy adjusting the position of the set screw, the angle of the footpeg can be adjustedBest suited for use with Küryakyn Footpegs with Clevis & Magnum Quick Clamps
419601 26.99
Stainless steel construction for superior strength and hinged construction for fast simple installationUS Patent # Des. 411,440
ChromeIncludes all mounting hardwareSold in pairs04-13 Sportster models
Description P/N RetailFront-Forward Control 482457 119.95Rear H-D #49322-04 482456 108.95
® HIGHWAY PEG BRACKETS
Chrome-plated heavy-duty brackets will accept any of the Biker’s Choice® male end footpegsSold in pairsFits L84-03 Sportster (exc. Custom models)H-D# 49159-88T
150858 33.50
® FOOTPEG SUPPORT STUDS
Chrome-platedSold in pairsFits 65-84 FL; 71-85 FX; 84-94 FXRTH-D# 50973-65
492817 13.50
® PASSENGER PEG RELOCATION KIT
Kit mounts to existing holes used to mount the seat on Softail framesProvides an alternative footrest position for passenger1/2”-20 ThreadFits 84-99 Softail models (exc. FXSTD Deuce)
493981 25.45
® REAR FOOTPEG CLEVIS
ChromeIncludes mounting hardware1/2”–20 ThreadSold in pairsFits L72-00 most H-D modelsH-D# 50900-72TA
JAYBRAKE PEG MOUNTSChrome-plated steelFootpeg mounts allow you to easily adapt any male mount footpeg or mini floorboard to JayBrake or Biker’s Choice® forward controlsSold in pairsFits JayBrake and Biker’s Choice® forward controls
491651 89.00
PINGEL® SHORT-BONESMoves the stock highway bar pegs closer to the riderHighly polished billet aluminumDoes not include engine guard clamp or foot peg clevisSome lower fairings may interfere with mounting
030606 67.95
® RIGID FRAME PASSENGER PEG MOUNT
Chrome-plated steel mount will accept most popular custom fold-up footpegsBolts directly to Big Twin four-speed transmissions
492521 82.95
PC RACING SHIFTER SKINBlackProtect your shoes from ugly shifter marksEasier shiftingSlides on in secondsMade of washable neopreneFits most H-D models with shifter pegs 2.5” to 3.5”
030102 9.99
® ENGINE BAR FOOTPEG MOUNT
Chrome billet aluminumFits 1-1/4” engine bar to accept male pegsSold in pairs
489830 74.95
/
482566
A&
IN&
W
SS
L
UNTS
adapt orboard to controls
payBrake and Biker’s Choice® forward controls1 89.00
®
NE
s
® PASSENGER PEG RELOCATION BRACKETS
Chrome-plated brackets relocate rear passenger pegs to a more comfortable positionSold in pairsFits 84-99 Softail models (exc. FXSTD Deuce)
601388 23.95
on
e)
® FOOTREST SPRING WASHERS
Fits L72-07 XL, Big TwinH-D# 50912-72
492441 6.50
GARDNER-WESTCOTT FOOT CONTROL HARDWAREHARLEY-DAVIDSON Year P/N RetailEarlier XL, FX, FLH 1985 041569 13.99
OTTARDWARE
COLONY FOOTPEG HARDWARE KITSChrome-plated custom domeRider and/or passengerO.E.M. type replacementSold in pairs
044301 044302
HARLEY-DAVIDSON Year O.E.M. P/N RetailXL,FL,FX 52-68 50970-52 044301 14.99XL 69-01 4721 044302 14.99FX, FL Big Twin 69-06 4721 044302 14.99
NEW PART NUMBERS ARE RED
FOOT CONTROL
1344
AUDIO& VIDEO
INDIAN& VICTORY
WINDSHIELDS
SEATS &SISSY BARS
LUGGAGE
SECURITY& COVERS
TIRES &WHEELS
BRAKES
CHASSIS
SUSPENSION
SHEET METAL
EXHAUST
FUEL & AIRSYSTEMS
ENGINE &OIL FILTERS
PRIMARYDRIVE
TRANSMISSION& FINAL DRIVE
GASKETS &HARDWARE
HANDLEBARS& CONTROL
CABLES
FOOTCONTROL
INSTRUMENT& LIGHTING
ELECTRICAL
BATTERIES& CHARGERS
TRAILERS& RAMPS
CHEMICAL& LUBES
TOOLS &SUPPLIES
GENERALACCESSORIES
& DISPLAY
CROSSREFERENCE
INDEX
PM30444444
Performance Machine Floorboards compliment any FLH/T or FLST modelOptimal size with rubber insert for comfort and gripIncludes left and right floorboards, bolts to stock mounts
PERFORMANCE MACHINE FLOORBOARD ASSEMBLY
Passenger
PM3046
PPMPM3044
PPM30466
RF CUSTOM PARTS FLOORBOARDS
Chrome
HARLEY DAVIDSON Year Chrome P/N RetailTouring 95-15 Chrome 661370 345.99Touring 95-15 Black 661371 345.99
Black
RiderHARLEY-DAVIDSON Year Finish P/N RetailFLH/FLT 84-15 Black Anodized PM3043 399.95FLH/FLT 84-15 Chrome PM3044 399.95FLST 84-14 Black Anodized PM3043 399.95FLST 84-14 Chrome PM3044 399.95
HARLEY-DAVIDSON Year Finish P/N RetailFLH/FLT 93-15 Black Anodized PM3045 379.95FLH/FLT 93-15 Chrome PM3046 379.95
FOOT CONTROL
1345NEW PART NUMBERS ARE RED
AUDIO& VIDEO
INDIAN& VICTORY
WINDSHIELDS
SEATS &SISSY BARS
LUGGAGE
SECURITY& COVERS
TIRES &WHEELS
BRAKES
CHASSIS
SUSPENSION
SHEET METAL
EXHAUST
FUEL & AIRSYSTEMS
ENGINE &OIL FILTERS
PRIMARYDRIVE
TRANSMISSION& FINAL DRIVE
GASKETS &HARDWARE
HANDLEBARS& CONTROL
CABLES
FOOTCONTROL
INSTRUMENT& LIGHTING
ELECTRICAL
BATTERIES& CHARGERS
TRAILERS& RAMPS
CHEMICAL& LUBES
TOOLS &SUPPLIES
GENERALACCESSORIES& DISPLAY
CROSSREFERENCE
INDEX
Perfect fusion of billet and rubber to provide the best in comfort and styleEach Fusion Series floorboard is machined from 6061-T6 billet aluminum and features knurled or linear rubber inserts for excellent foot tractionEach driver floorboard has three different mounting locations giving 3” of adjustability. Allowing you to adjust the floorboard forward and back to obtain your preferred riding positionMatching passenger floorboards are available for each style (available separately)Designed to match the Arlen Ness Fusion Grip and Foot and Shift Pegs (available separately)Driver floorboards measure: 13-4/5”L x 5”WPassenger floorboards measure: 10”L x 4”W
Styled to match the Arlen Ness Retro lineConstructed from chrome-plated billet aluminumFull length rubber inserts offer excellent grip and comfortDriver floorboards: 18”L x 6”W x 3/4” thickPassenger floorboards: 7”L x 4”W x 3/4” thickFloorboards designed to fit 08-15 FLT, FLHT, FLHR;12-15 FLD, 00-15 FLST modelsMatching passenger boards are designed for 93-15 FLT models
Knurled rubber floorboard inserts gives a new clean look to your O.E.M. floorboards while providing greater foot traction/grip over stockDesigned to match the many aftermarket grips out there with knurled rubber, allowing your O.E.M. floorboards to match your gripsMounts directly to O.E.M. floorboardsSold in pairs
Cutting-edge design from Arlen NessMachined from two-pieces of billet aluminum to create an all new see-thru designGreat way to add exceptional style and comfort to your bikeAvailable in chrome or black anodized finishKits include all mounting hardwareFloorboards designed to fit 86-15 FLST; 94-15 FLHR; 12-15 FLD, 82-15 FLH, FLT modelsMatching passenger boards are designed to fit 86-15 FLH, FLTDriver floorboards: 18”L x 5-3/4”W x 1” thickPassenger floorboards: 7”L x 4”W x 1” thick
ARLEN NESS DRIVER & PASSENGER DEEP CUT FLOORBOARDS
Anti-vibration ISO rich black rubberThree raised chrome tri-line bandsAvailable in chrome or black finishBolts easily in place of original boardsSold in pairsReplaces H-D#50631-04 (front), 50378-07 (rear)
Heavy-duty, die-cast aluminum floorboards with installed rubberPads include steel mounting blocks and required hardwareFits 66-85 FL, FLT models H-D# 50626-83
492617 57.50
T
®
RBOARDSfl b d ith i t ll d bb
490638 490639
® DRIVER FLOORBOARD PADS Floorboard pad and isolator incorporated into a one-piece unit for durabilityRectangularSold individuallyFits 80-15 Big Twin (exc. FLHRS, 05-06 FLSTN)H-D# 50614-91A
493969 33.50
® FLOORBOARDSDirect O.E.M. type replacement floorboardsFeatures high quality chrome-plating and special anti-vibration rubber pads
All the parts needed to replace bracket and hardware on O.E.M. floorboardsFits aluminum primary modelsFits 65-84 FL models
490335 46.95
PAUGHCO FLOORBOARDSAntique style oval boardsSold in pairsFits 80-15 5-speed and 6-speed Touring; 86-15 Heritage Softail
Description P/N RetailChrome with Riveted Rubber Mats 598125 198.95Black with Riveted Rubber Mats 598126 198.95Replacement Floorboard Rubbers (Black) 598127 88.95
Unique profile provides plenty of room and comfort for rider and passengerFeatures a non-skid rubber cushioning insert and are adjustable side to sideCNC machined from 6061 billet aluminumFinished in high luster chrome or black anodizeFront floorboards fit: 79-15 FLH, FLHR, FLHS, FLT, FLHT, FLHTCU, FLHX, FLHXS, FLTR, FLTRX, H-D FL Trike, FLSTC, FLSTF, FLSTN, FLSTSRear floorboards fit: 86-15 FLH, FLHR, FLHS, FLT, FLTR, H-D Trike
KURYAKYN® ISO® PASSENGER BOARDS FOR H-D MODELS WITH PASSENGER PEGS
Note: Must purchase BC #496934 (male end Mfg/N 8881).497923 219.99
KURYAKYN® ISO® PASSENGER BOARDS®
497134 189.99
KURYAKYN® PREMIUM & RIBBED BOARDS FOR DRIVER OR PASSENGER
Note: Boards should not be installed in place of a footpeg on a peg mount secured with a single fastener and no anti-rotation mechanism. The boards will apply too much force and loosen the mount from the bike.
Note: Mounting components sold separately. Installation on Softail models requires passenger mounts shown below. Installation in place of male mount footpeg requires #419174. Boards should not be installed in place of a footpeg on a peg mount secured with a single fastener and no anti-vibration mechanism. The board will apply too much force and loosen the mount from the bike.Description P/N Retail
HARLEY DAVIDSON Year P/N Retail216704 18.00216705 19.50
216704
PAUGHCO SUICIDE SHIFTER PARTS FOR 45 IN. & BIG TWIN MODELS
FOOT CONTROL
1367NEW PART NUMBERS ARE RED
AUDIO& VIDEO
INDIAN& VICTORY
WINDSHIELDS
SEATS &SISSY BARS
LUGGAGE
SECURITY& COVERS
TIRES &WHEELS
BRAKES
CHASSIS
SUSPENSION
SHEET METAL
EXHAUST
FUEL & AIRSYSTEMS
ENGINE &OIL FILTERS
PRIMARYDRIVE
TRANSMISSION& FINAL DRIVE
GASKETS &HARDWARE
HANDLEBARS& CONTROL
CABLES
FOOTCONTROL
INSTRUMENT& LIGHTING
ELECTRICAL
BATTERIES& CHARGERS
TRAILERS& RAMPS
CHEMICAL& LUBES
TOOLS &SUPPLIES
GENERALACCESSORIES& DISPLAY
CROSSREFERENCE
INDEX
KURYAKYN® ZOMBIE™ SHIFT ARM COVERS
Zombie™
Flame™
496815 494384
KURYAKYN® TRANSMISSION SHIFT ARM COVER
419005 19.99
KURYAKYN® SILHOUETTE FRONT SHIFT ARM ACCENTS
KURYAKYN® BRAKE PEDAL COVER
497795 32.99
KURYAKYN
KURYAKYN® EXTENDED BRAKE PEDALS
Note: On 02-07 models, the extended brake pedals provide only slightly more extension than stock but the brake pedal pad is slightly lower and flatter, making the transition from board to brake more natural.Description P/N Retail
497847 89.99497796 99.99494389 99.99
KURYAKYN® BRAKE PEDAL ARM COVER
494822 59.99
AKYN® BRAKE PEDAL ARM COVER
497847
497847497847
497796
HARLEY-DAVIDSON Year Mfg/N P/N Retail
496815 49.99419008 49.99
HARLEY-DAVIDSON Year Mfg/N P/N Retail
494384 49.99419009 49.99
HARLEY-DAVIDSON Year Mfg/N P/N Retail
494381 49.99
NEW PART NUMBERS ARE RED
FOOT CONTROL
1368
AUDIO& VIDEO
INDIAN& VICTORY
WINDSHIELDS
SEATS &SISSY BARS
LUGGAGE
SECURITY& COVERS
TIRES &WHEELS
BRAKES
CHASSIS
SUSPENSION
SHEET METAL
EXHAUST
FUEL & AIRSYSTEMS
ENGINE &OIL FILTERS
PRIMARYDRIVE
TRANSMISSION& FINAL DRIVE
GASKETS &HARDWARE
HANDLEBARS& CONTROL
CABLES
FOOTCONTROL
INSTRUMENT& LIGHTING
ELECTRICAL
BATTERIES& CHARGERS
TRAILERS& RAMPS
CHEMICAL& LUBES
TOOLS &SUPPLIES
GENERALACCESSORIES
& DISPLAY
CROSSREFERENCE
INDEX
® BRAKE PEDALS
PAUGHCO MECHANICAL & HYDRAULIC BRAKE PARTSMechanical Brake Parts
Hydraulic Brake Parts
Brake Pedals & Backing Plates for Softail & FXWG Models
