ITEM NAME: Boomer & George Tree-Tops Chicken Coop
SKU: WIT237-1
1/9For assistance with assembly, please contact
Hayneedle Customer Care Center 1-888-880-4884
PRE-ASSEMBLY PREPARATION:
2/9
! THIS PACKAGE MAY CONTAIN SMALL ITEMS WHICH SHOULD BE KEPT AWAY FROM CHILDREN
tPANEL AND FITTINGS IDENTIFICATION:
Qty:1 Qty:1
Qty:1 Qty:1
Qty:2
Qty:1
Qty:1
Qty:1
Qty:1 Qty:1
PRE-ASSEMBLY PREPARATION:• Please check that all parts and hardware are included before beginning assembly.• Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware.• Read through the preparation and assembly instructions in full before beginning assembly.• Please use CAUTION AND CARE WHEN LIFTING the product to avoid personal injury and (or) damage to the product. • The following additional tools are required for assembly: Philips screwdriver • For ease of assembly, two adults are recommended.• Assembly time: Approximately 45 minutes
Part ALeft Coop Panel – with Handle
Part BFront Coop Panel
Part CBack Coop Panel
Part D Right Coop Panel
Part E Coop Front Roof andCoop Back Roof
Part F Coop Roof Cap
Part G Nesting Box Front Panel
Part H Nesting Box Back Panel
Part I Nesting Box Side Panel
Part J Long Perch
3/9
PANEL AND FITTINGS IDENTIFICATION:
Qty:1 :2 Qty
HARDWARE LIST:
Qty: 14 Qty: 15 Qty: 10 Qty: 6
Qty:4 Qty:14 Qty: 1SET
Part K Short Perch
Part L Nesting Box Floor Boards
Qty:1
Qty:1
Qty:1
Qty:1
Qty:1 Qty:1
Qty:1 Qty:1
Qty:1 Qty:1
Part M Nesting Box Roof
Part N Coop Floor
Part O Front Pen Panel
Part P Back Pen Panel
Part Q Pen Side Wall Part R Ramp
Part S Front Pen Roof
Part T Back Pen Roof
Part U Pen Roof Cap
Part V Nesting Box Divider
4/9
STEP-BY-STEP ASSEMBLY:
1
2
3
STEP 1:
STEP 2:
STEP 3 :
Attach Left Coop Panel – with Handle (Part A) to Front Coop Panel (Part B) and Back Coop Panel (Part C) using Screw 2 (x4).Attach Right Coop Panel (Part D) to Front Coop Panel (Part B) and Back Coop Panel (Part C) using Screw 2 (x6).
Attach Coop Front Roof and Coop Back Roof (Part E x 2) to the Left and Right Coop Panels using Screw 1 (x6) through the hinges of the roof parts.Attach the Coop Roof Cap (Part F) to one of the Roofs (Part E) using Screw 4 (x2).Attach the Hinges (Part 7) to each Roof (Part E) using Screw 6 (x8).
2
Assemble the Nesting Box (Parts G, H & I) using Screw 1 (x4). Attach The Nesting Box Front Panel (Part G) to Nesting Box Side Panel (Part I) using Screw 1 (x2). Attach the Nesting Box Side Panel (Part I) to the Nesting Box Back Panel (Part H) using Screw 1 (x2).Attach the 3 assembled sides of the Nesting Box (Parts G, H & I) to the Right Coop Panel (Part D) using Bolt and Nuts (Part 5).
5/9
STE
P-BY-STEP ASSE
MBLY:
4
5
6
STEP 4:
STEP 5:
STEP 6:
STEP-BY-STEP ASSEMBLY:
Insert the Nesting Box Floor Boards (Part L x 2) and then the Nesting Box Divider (Part V) into the Nesting Box.Insert the Perches (Part J and K) into the coop. Allow the Perches to rest on the pre-assembled ledges in the coop house.
Insert the Nesting Box Roof (Part M) to the Right Coop Panel (Part D) at the hinges using Screw 6 (x6).
Insert the aluminum-lined Coop Floor (Part N) into the coop through the slit in the Front Coop Panel (Part B).
6/9
STEP-BY-STEP ASSEMBLY:
7
8
STEP 7:
STEP 8:
STEP 9: 9
Attach the Front Pen Panel (Part O) to the Front Coop Panel (Part B) using the pre-assembled locking system.Attach the Back Pen Panel (Part P) to the Back Coop Panel (Part C) using the pre-assembled locking system.
Attach the Ramp (Part R) to the Coop opening using Screw 3 (x2)
Attach the Pen Side Wall (Part Q) to the Back and Front Pen Panels (Parts O and P) using Screw 2 (x4).
7/9
STEP-BY-STEP ASSEMBLY:
10
11
12
STEP
STEP 11:
STEP 12:
10: Attach the Front Pen Roof (Part S) using Screw 3 (x4). Attach the Back Pen Roof (Part T) using Screw 3 (x4).
Attach Pen Roof Cap (Part U) to the seam of Front and Back Pen Roof (Parts S and T) using Screw 4 (x4).
Assembly is complete!
MAINTENANCE AND CARE TIPS FOR OUTDOOR WOOD FURNITURE
The best way to preserve and extend the life of your outdoor wood furniture is to cover it with a waterproof
cover when it's not in use, store it in a cool, dry place like a garage or shed during the winter months, and keep the wood
hydrated with products like linseed oil a couple times per year. The less exposure your wood furniture has to sun, wind,
rain, and snow, the longer it will last. Woods that are stained or painted should be sanded and re-stained or repainted as
needed to protect the elements from penetrating the surface. Wood left in direct contact with wet surfaces will quickly
become saturated and rot. When wood does get wet, dry it off as quickly as possible.
It's also important to place your outdoor wood furniture on a surface where water won't pool. A patio or deck is an ideal spot,
and you should consider paving stones or a bed of rocks for wood furniture out in the garden. Wood left in direct contact
with wet surfaces will quickly become saturated and rot. When wood does get wet, dry it off as quickly as possible or leave
it out in the sun to dry.
Frequently exposed to harsh conditions or damp surfaces, wood furniture will begin to show signs of wear and deterioration.
Signs of damage may include checking (cracking or splitting), swelling, rotting, and discoloration. In addition to protective
covers and off-season storage, you can further prevent this type of damage by keeping woods well-hydrated with products
like linseed oil. Saturate your furniture with the oil several times per year. Well-oiled wood will be better-protected from the
elements and will retain its color and smooth surface longer. Woods that are stained or painted should be sanded and
re-stained or repainted as needed to protect the elements from penetrating the surface.
Take time to learn more about how your particular type of wood tends to weather. Some woods, like pine, will require
frequent staining or oiling, while a wood like cedar has natural oils that make it resistant to cracking and moisture rot.
Woods like teak will turn a silver grey when left untreated, and many outdoor wood furniture owners look forward to this
transformation.
Finally, dirt build-up leads to deterioration, so keeping your outdoor wood furniture clean will give it a longer life. Clean it
well two or three times per year with water, mild soap, and a soft cloth. (This is also the perfect time for a periodic hardware
check.) We recommend using a product specifically designed for cleaning wood furniture. Hose it down before you start to
remove cobwebs and caked-on dirt. Do not use abrasive cleaners, bleach, or scouring products that will affect the finish.
Dry the furniture thoroughly when done. Poolside furniture should be hosed down after each use to minimize chlorine
damage.
8/9
9/9